Principal Installation Analysis Engineer Job at Airswift Sweden (Kuala Lumpur)

Principal Engineer

Baxter Healthcare Corporation is seeking a Principal Engineer with the following...

Location

United States , Marion

Salary:

143333.00 - 168000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering or a closely related field plus 5 years of related experience
Assess the current state of the facility and existing production equipment and develop a comprehensive project execution and implementation plan for the installation of new IV bag filling, pouching, and packing automatic/robotic equipment, utilizing established project management methodologies
Plan and Manage capital of long-term improvement capital expenditure projects $10M and savings $1M
Execute FDA/MoH regulated Change Management using Trackwise8 Management Systems
Use of Value Stream Mapping and Root Cause Analysis to identify improvement opportunities within the IV bag filling, pouching, and packing production lines. Lead targeted process optimization initiatives focused on increasing operational efficiency, enhancing product quality, and reducing scrap
Site SME for automation equipment for IV bags filling, pouching and packing activities within a production plant
Demonstrated familiarity with GMP requirements and experience operating within a highly regulated, controlled environment
Lead and organize multidisciplinary team activities for Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and pharma qualification protocols IQ and OQ
Demonstrated ability to develop comprehensive project approval documentation and deliver presentations to executive level committees with minimal guidance
Manage and oversee the installation of production line serialization systems to ensure compliance with national and international regulatory standards, including EUFMD, DSCSA, and UDI, required for IV bags

Job Responsibility

Responsible for leading complex automation and control system initiatives within a highly regulated pharmaceutical manufacturing environment
Define the technical vision and provide high‑level architectural guidance for automation systems to ensure alignment with business objectives and regulatory requirements
Evaluate, recommend, and integrate advanced technologies—including robotics, data analytics platforms, and proprietary equipment—to enhance manufacturing performance and reliability
Manage full project lifecycles, including capital requests, design, development, validation, commissioning, and launch of automation systems in GMP‑regulated environments
Identify, assess, and mitigate technical and project risks
manage external vendors and support negotiation processes when necessary
Ensure all automation and control initiatives comply with Good Manufacturing Practices (GMP), FDA regulations, and 21 CFR Part 11 requirements. Learn, understand, and consistently apply rigorous quality standards, Standard Operating Procedures (SOPs), and cGMP throughout all project activities
Supervise and coordinate the work of engineers and/or technicians assigned to project activities
Provide technical guidance, mentorship, and leadership to support troubleshooting, problem‑solving, and skills development across the engineering team

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Principal Engineer

Baxter Healthcare Corporation is seeking a Principal Engineer with the following...

Location

United States , Marion

Salary:

143333.00 - 168000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering or a closely related field plus 5 years of related experience
Assess the current state of the facility and existing production equipment and develop a comprehensive project execution and implementation plan for the installation of new IV bag filling, pouching, and packing automatic/robotic equipment, utilizing established project management methodologies
Plan and Manage capital of long-term improvement capital expenditure projects $10M and savings $1M
Execute FDA/MoH regulated Change Management using Trackwise8 Management Systems
Use of Value Stream Mapping and Root Cause Analysis to identify improvement opportunities within the IV bag filling, pouching, and packing production lines. Lead targeted process optimization initiatives focused on increasing operational efficiency, enhancing product quality, and reducing scrap
Site SME for automation equipment for IV bags filling, pouching and packing activities within a production plant
Demonstrated familiarity with GMP requirements and experience operating within a highly regulated, controlled environment
Lead and organize multidisciplinary team activities for Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and pharma qualification protocols IQ and OQ
Demonstrated ability to develop comprehensive project approval documentation and deliver presentations to executive level committees with minimal guidance
Manage and oversee the installation of production line serialization systems to ensure compliance with national and international regulatory standards, including EUFMD, DSCSA, and UDI, required for IV bags

Job Responsibility

Responsible for leading complex automation and control system initiatives within a highly regulated pharmaceutical manufacturing environment
Define the technical vision and provide high‑level architectural guidance for automation systems to ensure alignment with business objectives and regulatory requirements
Evaluate, recommend, and integrate advanced technologies—including robotics, data analytics platforms, and proprietary equipment—to enhance manufacturing performance and reliability
Manage full project lifecycles, including capital requests, design, development, validation, commissioning, and launch of automation systems in GMP‑regulated environments
Identify, assess, and mitigate technical and project risks
manage external vendors and support negotiation processes when necessary
Ensure all automation and control initiatives comply with Good Manufacturing Practices (GMP), FDA regulations, and 21 CFR Part 11 requirements. Learn, understand, and consistently apply rigorous quality standards, Standard Operating Procedures (SOPs), and cGMP throughout all project activities
Supervise and coordinate the work of engineers and/or technicians assigned to project activities
Provide technical guidance, mentorship, and leadership to support troubleshooting, problem‑solving, and skills development across the engineering team

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Senior Principal Engineer (Automation)

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United States , Marion

Salary:

128000.00 - 176000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering required (Electrical, Mechanical or Mechatronics Engineering preferred)
8+ years of experience in a similar role
8+ years of Rockwell PLC experience
Servo control systems (Rockwell, Yaskawa)
Ability to read and write electrical schematics
Hands on mechanical
AutoCAD drafting

Job Responsibility

Supervising a Controls Engineering Team and providing day to day engineering support
Providing technical mentorship to other engineering staff, engineering, and maintenance technicians
Providing analysis of plant manufacturing capacity, process optimization and automation, VIP identification and implementation, process validation planning/execution using lean manufacturing techniques and other problem-solving tools
Develop or participate in the development of solutions to problems for assigned projects
Participate in continuous improvement projects
Work with manufacturing and other functional groups on manufacturing regulatory compliance issues
Write, implement, and report on validation activities
Design and perform routine testing, project experiments, and analysis of data and report on results
Perform engineering studies on new equipment to resolve accurate settings, control points, etc. including data gathering during start up and test batches
Initiate new or revision of protocols/operating instructions specific to the project

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

Senior Principal Engineer (Automation)

Location

United States , Marion

Salary:

128000.00 - 176000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering required (Electrical, Mechanical or Mechatronics Engineering preferred)
8+ years of experience in a similar role
8+ years of Rockwell PLC experience
Servo control systems (Rockwell, Yaskawa)
Ability to read and write electrical schematics
Hands on mechanical
AutoCAD drafting
Applicants must be authorized to work for any employer in the U.S.

Job Responsibility

Supervising a Controls Engineering Team and providing day to day engineering support
Provide technical mentorship to other engineering staff, engineering, and maintenance technicians
Provide analysis of plant manufacturing capacity, process optimization and automation, VIP identification and implementation, process validation planning/execution using lean manufacturing techniques and other problem-solving tools
Develop or participate in the development of solutions to problems for assigned projects
Participate in continuous improvement projects
Work with manufacturing and other functional groups on manufacturing regulatory compliance issues
Write, implement, and report on validation activities
Design and perform routine testing, project experiments, and analysis of data and report on results
Perform engineering studies on new equipment to resolve accurate settings, control points, etc. including data gathering during start up and test batches
Initiate new or revision of protocols/operating instructions specific to the project

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

Senior Principal Engineer (Automation)

Location

United States , Marion

Salary:

128000.00 - 176000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering required (Electrical, Mechanical or Mechatronics Engineering preferred)
8+ years of experience in a similar role
8+ years of Rockwell PLC experience
Servo control systems (Rockwell, Yaskawa)
Ability to read and write electrical schematics
Hands on mechanical
AutoCAD drafting

Job Responsibility

Supervising a Controls Engineering Team and providing day to day engineering support
Provide technical mentorship to other engineering staff, engineering, and maintenance technicians
Providing analysis of plant manufacturing capacity, process optimization and automation, VIP identification and implementation, process validation planning/execution using lean manufacturing techniques and other problem-solving tools
Develop or participate in the development of solutions to problems for assigned projects
Participate in continuous improvement projects
Work with manufacturing and other functional groups on manufacturing regulatory compliance issues
Write, implement, and report on validation activities
Design and perform routine testing, project experiments, and analysis of data and report on results
Perform engineering studies on new equipment to resolve accurate settings, control points, etc. including data gathering during start up and test batches
Initiate new or revision of protocols/operating instructions specific to the project

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
Educational assistance programs
Time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service

Fulltime

Principal Engineer

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United States , Marion

Salary:

143333.00 - 168000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering or a closely related field plus 5 years of related experience
Assess the current state of the facility and existing production equipment and develop a comprehensive project execution and implementation plan for the installation of new IV bag filling, pouching, and packing automatic/robotic equipment, utilizing established project management methodologies
Plan and Manage capital of long-term improvement capital expenditure projects $10M and savings $1M
Execute FDA/MoH regulated Change Management using Trackwise8 Management Systems
Use of Value Stream Mapping and Root Cause Analysis to identify improvement opportunities within the IV bag filling, pouching, and packing production lines. Lead targeted process optimization initiatives focused on increasing operational efficiency, enhancing product quality, and reducing scrap
Site SME for automation equipment for IV bags filling, pouching and packing activities within a production plant
Demonstrated familiarity with GMP requirements and experience operating within a highly regulated, controlled environment
Lead and organize multidisciplinary team activities for Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and pharma qualification protocols IQ and OQ
Demonstrated ability to develop comprehensive project approval documentation and deliver presentations to executive level committees with minimal guidance
Manage and oversee the installation of production line serialization systems to ensure compliance with national and international regulatory standards, including EUFMD, DSCSA, and UDI, required for IV bags

Job Responsibility

Responsible for leading complex automation and control system initiatives within a highly regulated pharmaceutical manufacturing environment
Define the technical vision and provide high‑level architectural guidance for automation systems to ensure alignment with business objectives and regulatory requirements
Evaluate, recommend, and integrate advanced technologies—including robotics, data analytics platforms, and proprietary equipment—to enhance manufacturing performance and reliability
Manage full project lifecycles, including capital requests, design, development, validation, commissioning, and launch of automation systems in GMP‑regulated environments
Identify, assess, and mitigate technical and project risks
manage external vendors and support negotiation processes when necessary
Ensure all automation and control initiatives comply with Good Manufacturing Practices (GMP), FDA regulations, and 21 CFR Part 11 requirements. Learn, understand, and consistently apply rigorous quality standards, Standard Operating Procedures (SOPs), and cGMP throughout all project activities
Supervise and coordinate the work of engineers and/or technicians assigned to project activities
Provide technical guidance, mentorship, and leadership to support troubleshooting, problem‑solving, and skills development across the engineering team

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Principal Engineer, Outfitting

The Principal Engineer, Outfitting oversees designing, reviewing, and carrying o...

Location

Canada , North Vancouver

Salary:

143100.00 - 174900.00 CAD / Year

Washington Corporations

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in a relevant engineering subject area, Master’s degree preferred
Professional Engineering designation in the Province of British Columbia is optional
Minimum 15 years of post-secondary experience in ship operations, in-service support, and/or ship design and construction environments
20+ years preferred
Understanding of CADMATIC, ShipConstructor, AutoCAD, document control systems, and databases
Knowledge of MRP, purchasing, and management systems is preferred
Experience in complex vessel integration
Experience in supervising and developing personnel, with the ability to guide and mentor team members
Strong organizational and interpersonal skills with experience in diverse, multidisciplinary teams
Analytical skills to gather, analyze, or synthesize data, confirming its accuracy and adequacy as part of the collective analysis or synthesis process

Job Responsibility

Provides engineering and design expertise in Marine Outfitting Systems, including fire protection, insulation, structural openings, stairs, handrails, paint, gratings, lifesaving gear, cranes, winches, davits, and interior joiner design
Prepare design and calculation packages for contract compliance
Analyzes information, identifies methods, processes, steps, and needed plant, machinery, and equipment to design and improve manufacturing or material systems, ensuring the final product meets cost and quality standards
Designs engineering solutions and validates the process to achieve a design brief that meets organizational and regulatory standards
Provides technical authority, delegates to engineers, and approves changes to requirements
Analyzes information, drafts engineering standards and specifications, and assesses the effectiveness of these standards within one's engineering discipline to ensure work meets quality requirements
Provides guidance on engineering tasks for the organization and its suppliers, contractors, and consultants
Performs inspections to assess the quality of complex, large-scale engineering projects or the integrity of existing extensive installations or structures and determines the necessary remedial actions to ensure compliance with specifications and regulations
Establishes maturity targets and reviews completion at gate reviews
Uncovered emerging issues or needs, identifying potential causes, barriers, and key stakeholders, as well as related topics

What we offer

Annual bonus
Pension plan matching
Extended health care (paramedical services for massage therapy, speech therapy, mental health coverage, physiotherapy, and more)
Dental care
Vision care
Life insurance
Medical leave coverage
Parental leave coverage
$500 personal spending account
Employee Family Assistance Program (EFAP)

Fulltime

New

Principal Subsea Engineer

The Principal Subsea Engineer is responsible for interpreting internal or extern...

Location

United Arab Emirates , Dubai

Salary:

Not provided

McDermott

Expiration Date

Until further notice

Requirements

Minimum 10-15 years of industry experience related to SURF
Bachelor's Degree or Master's Degree in Engineering
Familiar with the content and application of standards, codes, and guidelines as applicable
Knowledge of many basic design techniques and analysis methods
Experience related to installation engineering and analyses for subsea infrastructure including rigid pipelines, flexible flowlines, risers, and subsea structures
Experience with industry-standard software packages for analysis (E.g., Orcaflex, MCS Pipelay, Abaqus)
Experience with industry-commonly used codes and standards for subsea installation engineering and analysis
Good organization and communication skills and ability to prioritize workload to meet project deadlines

Job Responsibility

Support subsea and offshore projects in performing design and installation engineering/analysis in a lead role and address various requirements for procurement
Provide specialist skills and knowledge in the areas related to engineering and analysis including design codes related to subsea engineering and installation engineering
Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards
Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations
Coordinate and engage in daily activities and schedule priorities for subsea engineering under limited supervision
Tender engineering support with an emphasis on document review, preparation of subcontractor documents, CTR preparation, bid evaluation, and vendor selection
Assume responsibility for technical reports, design calculations, engineering analysis, and interface with third parties including subcontractors and verification bodies
Required to attend and prepare for project progress meetings and departmental meetings
Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements
When acting as Lead Engineer, in addition: Direct small or medium-sized Engineering teams as a Lead Engineer

Fulltime

Select Country

Principal Installation Analysis Engineer

Job Description

Job Responsibility

Requirements

Looking for more opportunities?