Preventive maintenance mechanic Job at University of Rochester (Rochester)

Preventive maintenance mechanic

Maintains building systems by inspection, performing scheduled and simple mainte...

Location

United States of America , Rochester

Salary:

21.57 - 27.37 USD / Hour

University of Rochester

Expiration Date

Until further notice

Requirements

High School education
1-2 years related experience
or an equivalent combination of education and experience
Environmental Protection Agency Refrigerant Certification required

Job Responsibility

Maintains building systems by inspection, performing scheduled and simple maintenance tasks
Reports abnormal conditions to designated authority
Performs scheduled inspections of some building systems and equipment
Insures that equipment is in safe an efficient operating condition
Checks for leaks and mechanical vibration, regenerates water systems, reporting abnormal conditions
Replaces belts, filters, lamps, fuses
resets circuit breakers
lubricates, cleans, paints, labels equipment
Cleans and/or paints equipment, components and mechanical areas, seals mechanical area floors
Keeps records and makes reports of daily work, emergency/service calls investigated, service rendered and general condition of systems and equipment

Fulltime

Mechanic, Boilers & Preventive Maintenance

An EKU Boiler & Preventive Maintenance Mechanic troubleshoots and repairs instit...

Location

United States , Richmond

Salary:

Not provided

Eastern Kentucky University

Expiration Date

Until further notice

Requirements

High School Diploma or GED
Two years of related work experience
Experience must include a working knowledge of boiler and cooling towers maintenance procedures
Incumbent should have experience in Low pressure, High pressure and Hot water boilers, general knowledge of air handlers and cooling towers

Job Responsibility

Maintains and repairs University boilers, cooling towers and air handlers
Conducts preventive maintenance checks as required
Troubleshoots and repairs boilers, air handlers and cooling towers as required
Ensures compliance with all regulatory and/or policy requirements
Supports smooth and efficient operations of the department and the University by completing all other duties as assigned

What we offer

Overtime and on call as needed and required
KERS retirement

Fulltime

Industrial Maintenance Mechanic III HVAC - Night Shift

Location

United States , Chandler

Salary:

25.00 - 29.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or demonstrated equivalent
Three years of maintenance experience in one of the following trades or demonstrated equivalent combination of education and experience: Industrial HVAC/ Industrial Mechanical Machine Repair/ Industrial Mechanical Machine Repair, or facility maintenance Automotive Repair
Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
Must be willing to work overtime when required
May be required to work holidays and weekends
EPA Section 608 Universal Certification

Job Responsibility

Performs planned maintenance on all building equipment and related services for specific area while being sensitive and responsive to customer needs
Performs trouble-shooting techniques on HVAC equipment and systems
Performs preventative maintenance inspections
Provides support to co-workers, contractors, vendors, project managers, building managers, and engineers as necessary to support project and renovation work
Complies with all governmental, company, and industrial regulations, codes, and standards, health safety practices, and permit systems
Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS)
Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards
Recommends measures to improve maintenance methods and equipment performance
Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Maintenance Mechanic I

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States of America , Cleveland

Salary:

46400.00 - 58000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Associate’s degree in a technical field preferred
High School Diploma/GED with at least 2 years of mechanical systems repair, industrial maintenance, or equivalent technical experience required
Ability to individually lift and carry up to 50 pounds
Capability to bend/stoop, squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck and waist, and balance
Standard visual acuity, including the capacity to differentiate colors
Ability to work most holidays, some weekends, and plant shutdown periods
Applicants must be authorized to work for any employer in the U.S.
We cannot sponsor or transfer employment visas

Job Responsibility

Support plant production by performing repairs and preventive maintenance on manufacturing equipment
Troubleshoot equipment containing electrical, electronic, mechanical, pneumatic, hydraulic, and vacuum systems
Rebuild and modify production machines and components to support technology improvements and control parts cost
Support the installation of manufacturing equipment
Use hand tools, power tools, and electrical test instruments relating to control circuits
Directly support PMT, TPM, Lean Maintenance, and Lean Energy activities through team membership, innovative thinking, and completion of assigned projects
Act as a resource for manufacturing operator skill training and help develop area MIT abilities
Apply precision maintenance workmanship in all preventive, corrective, and project activities
Analyze machine failures for root cause and recommend corrective actions
Assist in annual equipment inspections

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts
Educational assistance programs
Time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave
Commuting benefits
Employee Discount Program
Employee Assistance Program (EAP)

Fulltime

Feed Mill Maintenance Mechanic

Keep critical operations running at full strength. As a Maintenance Mechanic in ...

Location

United States , Forsyth

Salary:

Not provided

Perdue Farms

Expiration Date

Until further notice

Requirements

Reading, Writing, Math and Analytical skills
High School or equivalent is beneficial but not required
Must have ability to move through the facility and carry required equipment, tools which could weigh as much as 100lbs
Must wear required safety equipment
Exposed to existing weather conditions while outside work is performed
Exposed to air born dust, chemicals such as hexane, caustic soda, aluminum chloride

Job Responsibility

Responsible for moving throughout the facility, reach vertical heights up to 150 feet to perform repairs, PM’s and monitors Equipment in both open and confined spaces
Perform preventive Maintenance as assigned which includes but is not limited to fabrication, rebuilding of machinery, gearboxes, pumps, etc
Document work on work orders as appropriate
Respond to emergency breakdown during both on and off duty hours to ensure operation continuity on a 24-hour a day basis
Generates and submits paperwork related to work location such as work orders timecards, and any related to meetings, safety, etc
Perform all equipment repairs and daily work within OSHA regulation, lockout/tag –out, and Perdue safety book guidelines

Fulltime

Preventive Maintenance Manager

The Preventive Maintenance Manager is responsible for the preventative maintenan...

Location

United States , Denver

Salary:

90000.00 - 95000.00 USD / Year

The University Of Denver

Expiration Date

Until further notice

Requirements

A high school diploma or G.E.D.
Three years' experience in the role of manager of a trades shop
Minimum of 5 years' experience in either plumbing, HVAC or electrical trades
Experience in construction management or quality control/assurance
Must possess a valid Colorado Driver's License and be insurable under university guidelines
Pass a pre-employment physical exam and lift 100 lbs. occasionally
Familiar working with Computerized Maintenance Management System (CMMS) software

Job Responsibility

Ensures compliance with all applicable safety regulations, building codes, and safety requirements
Train and enforce safety procedures and all applicable regulations
Planning and Project support of ensuring utility restoration in the event of primary utility outages/interruptions
Extent the life of current assets with vigorous preventative maintenance
Using predictive techniques to adjust preventative maintenance to account for needs as they arise or before
Approve time off requests and technicians time cards
Supervise the preventative maintenance staff and schedule, track and document all maintenance, upgrades, and repairs using CMMS software
Establishes and conducts a preventive maintenance program of scheduled inspection and maintenance of electrical, mechanical equipment, plumbing and general systems, equipment and facilities to assure proper operation and to correct malfunctions before major breakdowns develop
Creates work orders to report equipment having non preventative maintenance problems
Provide feedback on drawing and specification reviews of new work to ensure it conforms to site general practices and maintainability of the equipment

What we offer

medical
dental
retirement
paid time off
tuition benefit
ECO pass

Fulltime

Maintenance Mechanic

We are looking for a Maintenance Mechanic/Technician to join our Maintenance te...

Location

United States , Portland

Salary:

29.00 - 29.50 USD / Hour

Ajinomoto Foods North America, Inc.

Expiration Date

Until further notice

Requirements

High school diploma or GED required
6+ months of manufacturing maintenance experience required
1+ year of maintenance experience required
Must be able to read and comprehends basic blue-prints and mechanical drawings
Must be able to read and understands test meters
Must possess basic understanding of maintenance and installation of facility plumbing system, boilers, air compressors and hydraulic system
Basic knowledge of basic math skills is required
Ability to read, write, and communicate effectively
Basic understanding of HACCP and food safety concepts

Job Responsibility

Perform proper preventive maintenance using approved, safe techniques
Responsible for ensuring equipment is ready for production start-up
Responsible for repairs on worn out or damaged equipment
Perform needed equipment modification and fabrication
Assist production, sanitation, and other support groups when needed
Demonstrate good working knowledge of Good Manufacturing Practices (GMP) and Good Sanitation Practices (GSP)
Follow all safety rules and practices
Perform work techniques, speeds, and efficiencies at company standards
Works with and understands the MP2 system program
Develop and implement maintenance procedures for equipment

What we offer

Medical, Dental, Vision insurance on DAY ONE
Company paid STD, LTD, and Life Insurance on DAY ONE
80 hours of vacation and 40 hours of sick time per fiscal year
401(k) Retirement Savings plan that includes company’s matching contributions up to 4.5%
Wellness reimbursement towards gym membership and/or exercise equipment
Referral bonuses totaling $750 when an employee refers someone to work with our company
Quarterly sales of product to employees

Fulltime

Maintenance Mechanic

As a Maintenance Mechanic, you will provide regular and preventative maintenance...

Location

United States , Hereford

Salary:

29.41 USD / Hour

Nestlé Purina

Expiration Date

Until further notice

Requirements

High school diploma or GED
1+ years of mechanical maintenance experience in a manufacturing, industrial, technical, automotive or military environment
Must have basic proficiency of English language to comply with verbal and written directions, signs, policies and procedures

Job Responsibility

Provide regular and preventative maintenance in a safe and efficient manner to all plant equipment
Use a wide variety of different tools and equipment to maintain and repair equipment
Review and actively participate in the risk assessments
Equipment troubleshooting and repair
Diagnose and repair mechanical failure
Perform required preventative maintenance checks and report all problems to supervision
Maintain quality workmanship in the department as required by supervision
Utilize ordering procedures in the maintenance storeroom
Be willing to work weekends, overtime and back shifts

What we offer

Performance-based incentives
401k with Company match
Healthcare coverage
Broad range of other benefits

Select Country

Preventive maintenance mechanic

Job Description

Job Responsibility

Requirements

Looking for more opportunities?

Preventive maintenance mechanic

Preventive maintenance mechanic

Mechanic, Boilers & Preventive Maintenance

Industrial Maintenance Mechanic III HVAC - Night Shift

Maintenance Mechanic I

Feed Mill Maintenance Mechanic

Preventive Maintenance Manager

Maintenance Mechanic

Maintenance Mechanic

Our AI answers in your language