CrawlJobs Logo

Pre-commissioning Superintendent

lobelia.earth Logo

Lobellia

Location Icon

Location:
South Korea , Dong

Category Icon
Category:

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided

Job Description:

We are looking for a CPP Pre-commissioning Superintendent for one of our clients.

Job Responsibility:

  • Promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities
  • Carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices
  • Treat all information obtained during course of the work with confidentiality
  • During construction and pre-commissioning phases, participate to KOM with EPC Contractor/Subcontractor with respect to Discipline matters
  • Interface with EPC Contractor pre-commissioning Manager and COMPANY Construction team
  • Interface with COMPANY commissioning team
  • Ensure that ICAPS is daily updated by EPC Contractor
  • Review and approve the different Pre-Commissioning report issued by the EPC Contractor and/or Subcontractors/Vendors on a daily basis
  • Ensure the completeness and delivery schedule of Vendor documentation, reporting, vendor procedures, handover certificates, etc.
  • Ensure Vendor’s recommendation for preservation procedures are applied and followed via EPC Contractor tool
  • Ensure Vendor’s/equipment/package punch list coordination and input into ICAPS
  • Responsible for identifying priorities in the EPC Contractor punch list clearance to be in accordance with subsystem priorities
  • Review RFC dossier and manage its distribution through COMPANY Superintendent before approval by Head of Construction
  • Ensure that at time of Sail away, any remaining PL are clearly identified and entered into ICAPS
  • Stop & report immediately to Head of Construction for any anomaly or non-conformity
  • Attend the various construction meetings, and provide support to the CSR in its various reviews
  • Participate to construction, HSE or QAQC specific audits or visits
  • Provide regular inspection & activity reports
  • Follow up on the implementation of decided action plans, or other mitigation plan issued
  • Review and approve the different inspection reports issued by the EPC Contractor and/or Subcontractors/Vendors’ on a daily basis
  • Ensure that EPC Contractor and Vendors personnel are qualified for the task they’ve been assigned to
  • Issue Non-Conformance reports or review EPC Contractor Non-Conformance reports and validate dispositions
  • Intervene as necessary where warranted
  • Issue and/or participate in the issuance of CMS Deviation applicable to Pre-commissioning activity
  • Participate in the resolution of DEV and TQ with the support from Discipline Engineers / Commissioning Team
  • Assist reporting during all phases and more particularly the close-out report and lesson learn

Requirements:

  • Bachelor’s degree or Company approved equivalent in engineering
  • Professional Experience: 15 years
  • Experience within project: 10 years
  • Pre-Commissioning experience on topsides EPCIC Project
  • Practical knowledge of applicable codes and standards such as EN, ISO, ASTM, NACE and SSPC
  • Experience on construction yard
  • Good knowledge of Oil and Gas Industry Standards and International codes/standards related to design, fabrication, inspection and pre-commissioning
  • Good leadership skills
  • Good communication skills
  • Ability to work on projects in a complex and multicultural environment
  • Skilled in using computer programs for word processing, database management, spreadsheets and e-mail communications
  • Familiar with PRODOM/MANASA/ICAPS
  • Mandatory language is English & Local language based on EPC location (Mandarin for WHP and CPP, Korean for CPP)
  • H2S OPITO and T-BOSIET trainings
What we offer:
  • Accommodation
  • Transport
  • Visa
  • Insurance

Additional Information:

Job Posted:
January 15, 2026

Work Type:
On-site work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Pre-commissioning Superintendent

Commissioning Superintendent

COT supports the Commissioning Manager in the comprehensive planning, execution,...
Location
Location
Qatar , Ras Laffan
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree or diploma in relevant discipline or equivalent
  • Significant experience in the industrial construction of large or xl gas plants
  • Covered a similar role in at least 2-3 projects of comparable size
  • A minimum of 18 years of relevant experience
  • Experience working on the Contractor side
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • Collaborate with supervisors to establish detailed procedures
  • Outline daily tasks and create a step-by-step plan based on priorities set by the Commissioning Manager
  • Allocate assignments to the supervisors and assistants
  • Ensure the adherence to established procedures and the agreed timeline for all pre-commissioning and commissioning activities
  • Maintain quality standards and safety procedures among the commissioning team, including compliance with work permit requirements
  • Coordinate with Commissioning discipline Superintendents (electrical, instrument, mechanical) to complete pre-commissioning and commissioning tasks to allow the hand-over of the project within the target dates and priorities defined with the Commissioning Manager
  • Check the Test Pack to confirm the punch points, reinstatement point, blind list as specified in the project Test Pack Management Procedure
  • Contribute to the development and implementation of the plan which considers all the constraints to optimize the overall project schedule
  • Engage with Client Project Team, Project Management, Subcontractors, Vendors Representatives
  • Propose to the Commissioning Manager and CVC the needs for mobilization of Vendors specialists
What we offer
What we offer
  • Single Status
  • Accommodation provided by the company
  • Transportation provided by the company
  • Round trip ticket on each rotation (Economy class)
  • Fulltime
Read More
Arrow Right

Commissioning Superintendent

COT supports the Commissioning Manager in the comprehensive planning, execution,...
Location
Location
United Arab Emirates , Al Ruwais, Abu Dhabi
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree or diploma in relevant discipline or equivalent
  • Significant experience in the industrial construction of large or xl gas plants
  • Covered a similar role in at least 2-3 projects of comparable size
  • A minimum of 18 years of relevant experience
  • Experience working on the Contractor side
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • Collaborate with supervisors to establish detailed procedures
  • Outline daily tasks and create a step-by-step plan based on priorities set by the Commissioning Manager
  • Allocate assignments to the supervisors and assistants
  • Ensure the adherence to established procedures and the agreed timeline for all pre-commissioning and commissioning activities
  • Maintain quality standards and safety procedures among the commissioning team, including compliance with work permit requirements
  • Coordinate with Commissioning discipline Superintendents (electrical, instrument, mechanical) to complete pre-commissioning and commissioning tasks to allow the hand-over of the project within the target dates and priorities defined with the Commissioning Manager
  • Check the Test Pack to confirm the punch points, reinstatement point, blind list as specified in the project Test Pack Management Procedure
  • Contribute to the development and implementation of the plan which considers all the constraints to optimize the overall project schedule
  • Engage with Client Project Team, Project Management, Subcontractors, Vendors Representatives
  • Propose to the Commissioning Manager and CVC the needs for mobilization of Vendors specialists
What we offer
What we offer
  • Single Status
  • Accommodation provided by the company
  • Transportation provided by the company
  • Round trip ticket on each rotation (Economy class)
  • Fulltime
Read More
Arrow Right

Commissioning Electrical Assistant

CEA executes the activities pertaining to his discipline in compliance with the ...
Location
Location
United Arab Emirates , Al Ruwais
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A bachelor’s degree or diploma in Electrical Engineering
  • Minimum of 3 to 5 year's work experience
  • Significant experience in in a similar position on EPC Oil & Gas projects/ Refinery
  • Experience in on-site pre-commissioning / commissioning of electrical systems and equipment
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • Implement pre-commissioning and commissioning procedures for electrical equipment
  • Execute activities with the assigned crew from the Subcontractor within the discipline
  • Ensure effective utilization of commissioning manpower and consumables
  • Execute Vendor’s specialists field activities in accordance with the Vendor’s representative plan
  • Perform checklists as per supervisor instructions
  • Prepare forms for all tests, ensuring submission of certificates signed by involved parties for final handover to the certification engineer (QA/QC)
  • Ensure proper safety procedures during cable tests (megger, induction test), motor and transformer tests, relay tests, and electrical panel tests
  • Serve as an authorized person designated by the site manager to receive or issue permits
  • Work according to the project Permit to Work Procedure
  • Assistance the supervisor in
What we offer
What we offer
  • Competitive salary package with benefits
Read More
Arrow Right

Commissioning Operation Superintendent

The scope of the project entails the implementation of three gas boosting statio...
Location
Location
Algeria , Hassi R'Mel, Laghouat
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in the oil and gas industry
  • At least 5 years relevant experience in a similar role
  • Experience in Gas Plants and EPC Projects
  • Fluent English
  • Excellent IT and analytical skills
  • Excellent communications, team-oriented and interpersonal skills
  • Attention to details
  • Self-motivation and direction, with a strong bias toward timely performance and problem resolution.
Job Responsibility
Job Responsibility
  • Collaborate with supervisors to establish detailed procedures
  • Outline daily tasks and create a step-by-step plan based on priorities set by the Commissioning Manager
  • Allocate assignments to the supervisors and assistants
  • Ensure the adherence to established procedures and the agreed timeline for all pre-commissioning and commissioning activities
  • Maintain quality standards and safety procedures among the commissioning team, including compliance with work permit requirements
  • Coordinate with Commissioning discipline Superintendents (electrical, instrument, mechanical) to complete pre-commissioning and commissioning tasks to allow the hand-over of the project within the target dates and priorities defined with the Commissioning Manager
  • Check the Test Pack to confirm the punch points, reinstatement point, blind list as specified in the project Test Pack Management Procedure
  • Contribute to the development and implementation of the plan which considers all the constraints to optimize the overall project schedule
  • Engage with Client Project Team, Project Management, Subcontractors, Vendors Representatives
  • Propose to the Commissioning Manager and CVC the needs for mobilization of Vendors specialists
  • Fulltime
Read More
Arrow Right

Commissioning Operation Supervisor

The scope of the project entails the implementation of three gas boosting statio...
Location
Location
Algeria , Laghouat
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in the oil and gas industry
  • At least 5 years relevant experience in a similar role
  • Experience in Gas Plants and EPC Projects
  • Fluent English
  • Excellent IT and analytical skills
  • Excellent communications, team-oriented and interpersonal skills
  • Attention to details
  • Self-motivation and direction, with a strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • To develop the detailed pre-commissioning procedures according to the instructions of commissioning manager or commissioning superintendent
  • To field check the DAC and prepare relevant commissioning punch list, following the CME instructions
  • To assure that all activities such as flushing / blowing, reinstatement of piping components and local instruments, leak test, motor run-in, machinery run-in, static equipment inspections, cleaning, internals installations, box-up are duly performed in accordance with the stated procedures, in conformity with the safety rules and as per the instructions of commissioning manager or commissioning superintendent
  • To organize and manage the operations in field of the assigned team from the sub-contractor by controlling their job and the implementation of plant safety procedures in case of emergency
  • Support the vendors’ specialists in the execution of the job and coordinate their actions with the commissioning supervisors
  • Supervise the works of vendors’ specialists and ensure their efficient utilization
  • To keep records of all activities performed in the logbook
  • To produce the certificates, duly signed by the involved parties, and handover to certification engineer (QA/QC)
  • Can be the authorized person designated by the site manager to receive or issue a permit to work according to the project permit to work procedure
Read More
Arrow Right

Commissioning Supervisor

Commissioning Supervisor executes the activities pertaining to the pre-commissio...
Location
Location
United Arab Emirates , Al Ruwais, Abu Dhabi
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree or diploma in relevant discipline or equivalent
  • Significant experience in the industrial construction of large or xl gas plants
  • Covered a similar role in at least 2-3 projects of comparable size
  • A minimum of 12 years of relevant experience
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • To develop the detailed pre-commissioning procedures according to the instructions of commissioning manager or commissioning superintendent
  • To field check the DAC and prepare relevant commissioning punch list, following the CME instructions
  • To assure that all activities such as flushing / blowing, reinstatement of piping components and local instruments, leak test, motor run-in, machinery run-in, static equipment inspections, cleaning, internals installations, box-up are duly performed in accordance with the stated procedures, in conformity with the safety rules and as per the instructions of commissioning manager or commissioning superintendent
  • To organize and manage the operations in field of the assigned team from the sub-contractor by controlling their job and the implementation of plant safety procedures in case of emergency
  • Support the vendors’ specialists in the execution of the job and coordinate their actions with the commissioning supervisors
  • Supervise the works of vendors’ specialists and ensure their efficient utilization
  • To keep records of all activities performed in the logbook
  • To produce the certificates, duly signed by the involved parties, and handover to certification engineer (QA/QC)
  • Can be the authorized person designated by the site manager to receive or issue a permit to work according to the project permit to work procedure
What we offer
What we offer
  • Single Status
  • Accommodation provided by the company
  • Transportation provided by the company
  • Round trip ticket on each rotation (Economy class)
  • Fulltime
Read More
Arrow Right
New

Commissioning Machinery Supervisor

He executes the pre-commissioning and commissioning activities for the plant as ...
Location
Location
United Arab Emirates , Ruwais, Abu Dhabi
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree or diploma in relevant discipline or equivalent
  • Minimum of 10-12 years work experience
  • Significant experience in machinery commissioning activities, specifically rotating equipment
  • Significant experience in a similar position on EPC Oil & Gas projects/ Refinery
  • Experience with rotating equipment related to polyolefins
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • Develop detailed pre-commissioning procedures for Machinery & Packages, including procedures for functional tests of the machinery in accordance with the instructions from the Commissioning Machinery Superintendent
  • Conduct field checks of the DAC and prepare the relevant Commissioning punch list, following from CME
  • Expediting closure of pending Punch List Items in alignment with the priorities set by the Commissioning Superintendent (COT)
  • ensure that activities are carried out in accordance with the established procedures and requirements
  • Ensure compliance with all safety rules in the field
  • Supervise the works of vendors’ specialists, ensuring their efficient utilization
  • Organize and manage the field operations of the assigned team from the Subcontractor, overseeing their tasks and the implementation of Plant Safety procedures in case of emergencies
  • Support the vendors’ specialists in executing their tasks and coordinate their actions with the Commissioning supervisors
  • Keep records of all activities performed in the logbook
  • Produce certificates, duly signed by the involved parties, and hand them over to the certification engineer (QA/QC)
What we offer
What we offer
  • Single Status
  • Accommodation provided by the company
  • Transportation provided by the company
  • Round trip ticket on each rotation (Economy class)
  • Fulltime
Read More
Arrow Right

Commissioning Electrical Supervisor

He executes the activities pertaining to his discipline in compliance with the q...
Location
Location
Saudi Arabia , Al Jubail
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in engineering or a related field
  • Minimum of 8 years of experience in a safety-related role, preferably within the construction or oil and gas industry
  • Relevant experience in 3 major EPC projects
  • oil & gas, petrochemical sector
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • To develop the detailed pre-commissioning procedures for Electrical Items & Packages, procedures for the functional tests of the electrical Items according to the instructions of Commissioning Electrical Superintendent
  • To field check the DAC and prepare relevant Commissioning punch list, following the CME instructions
  • Follow up of activities according to the schedule and by applying the procedures and safety rules
  • To organize and manage the operations in field of the assigned team from the Subcontractor by controlling their job and the implementation of Plant Safety procedures in case of emergency
  • To keep records of all activities performed in the logbook for the purpose of monitoring the progress achieved and apply necessary recovery actions
  • To supervise the activities of electrical substation power on and motor run in field. Ensure the application of the TAG-OUT/LOCK OUT
  • Support the Vendors specialists in the execution of the job and coordinate their actions with the Commissioning supervisors
  • Supervise the works of vendors’ specialists and ensure their efficient utilization
  • During the execution of the interlocks, logic and sequence test, check in MCC that all the actions required or actuated from the board operator are properly performed
  • Carry out operation of the starters as per the approved work permit request
What we offer
What we offer
  • Single Status
  • Accommodation (Meals) provided by the company
  • Transportation provided by the company
  • Round trip ticket on each rotation (Economy class)
  • Fulltime
Read More
Arrow Right