Power and Performance Engineer Job at AMD (Hyderabad)

Principal Power Electronics Engineer

We are seeking a highly experienced and hands-on Principle Power Electronics Eng...

Location

Canada , Burnaby

Salary:

130000.00 - 160000.00 CAD / Year

EQUINOX POWER

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Electrical Engineering or equivalent (Master’s Degree or Ph.D. is a strong plus)
Minimum 10 years of experience in designing high-performance, cost-effective power conversion products, with a proven track record of successful project delivery
Extensive experience with high-frequency switch mode power conversion products and 3-phase AC systems
Expertise in designing resonant power conversion topologies and advanced circuit topologies utilizing wideband gap devices (SiC or GaN MOSFETs)
In-depth understanding of feedback loop stability and analysis, with the ability to optimize complex control systems
Experience in the design and/or fabrication of high-frequency magnetics utilizing ferrite core materials
Proficiency in both analog and digital embedded control design, with the ability to read and debug firmware code
Strong background in EMC testing (FCC/CE) and safety testing (CSA/UL), with a deep understanding of compliance standards
Proficiency in using simulation tools such as PSIM, PLECS, LTSpice, MATLAB, and Simulink
Exceptional analytical and problem-solving skills, with a proactive approach to resolving complex technical issues

Job Responsibility

Lead the design and development of advanced power electronics systems, including inverters, converters, digital controllers, and power management systems
Oversee the creation of detailed engineering specifications, schematics, and layouts for power electronics products, ensuring accuracy and adherence to project requirements
Guide the team in the design, product development, testing, and troubleshooting of high-performance power conversion products: AC-DC, DC-DC, DC-AC, or AC-AC at various power levels ranging from 1kW to 30kW
Ensure compliance with regulatory requirements (e.g., UL, CSA, NEBS, FCC, CE, etc.) and drive the certification process
Architect and develop DSP or MCU-controlled (fully digital) power conversion systems from concept to commercial product, leveraging the latest technologies and methodologies
Develop and manage project timelines, milestones, and deliverables, ensuring projects are completed on time, within scope, and budget
Foster a culture of innovation, continuous improvement, and technical excellence within the engineering department
Prepare and review detailed technical documentation, including design reports, test reports, and user manuals
Present project status updates, technical findings, and strategic recommendations to senior management and stakeholders
Mentor and coach junior engineers, providing technical guidance and support to enhance team capabilities

What we offer

Competitive salary and a benefits package
Extended health, dental, and vision coverage
2 weeks paid vacation in the first year, plus 1 week off during the Christmas holiday season
Start-up environment fostering collaboration and innovation
Accelerated professional growth and development through working with leading-edge projects

Fulltime

Power Electronics Design Engineer

We are seeking a Power Electronics Design Engineer to join our innovative team. ...

Location

Canada , Burnaby

Salary:

85000.00 - 120000.00 CAD / Year

EQUINOX POWER

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Electrical Engineering or equivalent (Master’s Degree is a plus)
Minimum 4 years of working experience in designing high-performance but cost-effective power conversion products
Experience with high-frequency switch mode power conversion products (experience in working with 3-phase AC systems is a plus)
Experience in designing resonant power conversion topologies and advanced circuit topologies utilizing wideband gap devices (SiC or GaN MOSFETs)
Good understanding about feedback loop stability and analysis
Experience in the design and/or fabrication of high-frequency magnetics utilizing ferrite core materials
Experience with both analog and digital embedded control design (ability to read and debug firmware code for potential problems is a plus)
Experience with EMC testing (FCC/CE) and/or safety testing (CSA/UL) is required
Strong analytical and problem-solving skills, with the ability to troubleshoot and resolve complex technical issues
Familiarity with simulation tools such as PSIM, PLECS, LTSpice, MATLAB, and Simulink

Job Responsibility

Contribute to the design and development of power electronics systems, including inverters, converters, digital controllers, and power management systems
Create detailed engineering specifications, schematics, and layouts for power electronics products
Assist the team in the design, product development, testing, and troubleshooting of various high-performance power conversion products: AC-DC, DC-DC, DC-AC, or AC-AC at various power levels ranging from 1kW to 30kW
Ensure that regulatory requirements (e.g., UL, CSA, NEBS, FCC, CE, etc.) are met
Design and build DSP or MCU-controlled (fully digital) power conversion systems from concept to commercial product
Develop project timelines, milestones, and deliverables, ensuring projects are completed on time and within budget
Foster a culture of innovation and continuous improvement within the engineering department
Prepare detailed technical documentation, including design reports, test reports, and user manuals
Present project status updates, technical findings, and recommendations to the Project Lead

What we offer

Competitive salary and a benefits package
Extended health, dental, and vision coverage
2 weeks paid vacation in the first year, plus 1 week off during the Christmas holiday season
Start-up environment fostering collaboration and innovation
Accelerated professional growth and development through working with leading-edge projects

Fulltime

Maintenance Technician - 4th Class Power Engineer

The Maintenance Technician (MT) with 4th Class Power Engineer status will work u...

Location

Canada , Albany

Salary:

29.05 - 30.21 CAD / Hour

Atlantic Beef Products Inc.

Expiration Date

Until further notice

Requirements

Must possess 4th class Stationary Power Engineer Certification
Experience in a large-scale meat or food manufacturing/processing environment considered an asset
Able to read and interpret various schematics and drawings
Attention to detail and excellent troubleshooting skills required
Strong mechanical inclination
Superior verbal and written communications skills required
Proven self-starter with the demonstrated ability to work well independently with little supervision and as part of a team
Proficiency in various Microsoft applications and Preventative Maintenance programs considered an asset
Interacts with all levels of the organization, therefore, must possess demonstrated interpersonal skills
Able to work well under pressure while always maintaining professionalism

Job Responsibility

Troubleshoot and evaluate problems as they arise, locating source of malfunction and performing minor repairs as required on a wide variety of equipment
Inform necessary authority of malfunctions requiring major repair
Ensure the proper operation and functioning of the organization’s boilers and related equipment
Perform regularly scheduled preventative maintenance on boilers and related machinery
Conduct regular inspections of machinery and surrounding areas, making adjustments as required
Maintain a logbook of daily activities such as operations, maintenance, test results, instrument or computer interface readings and equipment malfunctions
Collaborate with the organization’s other engineers and MT’s as required to ensure safe and efficient operations
Perform regular tests to ensure proper functioning of equipment
Adjust controls and valves on equipment or computer terminal to regulate boiler operations
Maintain assigned area and equipment ensuring cleanliness and order at all times

What we offer

Competitive pay
Comprehensive benefits (pension, extended heath and vision, dental, life insurance, disability insurance, AD&D)
Excellent career growth and development opportunities
Work life balance
Employee discounts
Reimbursements

Fulltime

Power Engineer 4th Class

Are you a motivated and safety-focused Power Engineer looking to grow your caree...

Location

Canada , Hinton

Salary:

Not provided

West Fraser

Expiration Date

Until further notice

Requirements

A valid 4th class power engineering designation including firing time
Work well in a team environment
Proven ability to multitask in a fast-paced environment
Demonstrate problem solving, troubleshooting and analytical skills
Desire to progress, learn, grow and succeed
Physical ability to work 12-hour shifts
Good interpersonal and communication skills

Job Responsibility

Maintain a safe work environment
Ensuring the efficient operation of the Biomass Facility
Ensure the efficient operation of the CDK kilns, including loading and unloading
Perform Kiln changes and other duties as needed

What we offer

Outstanding benefits package including medical, dental, pension and savings plan, life insurance, disability, accident insurance, vacation, and holidays

Fulltime

Power Systems Engineer

Wessler is looking for a Power Systems Engineer with 10-15 years in the water, w...

Location

United States , Grove City, Ohio

Salary:

Not provided

Wessler Engineering

Expiration Date

Until further notice

Requirements

10-15 years experience of electrical engineering and design, providing electrical & instrumentation designs for water and wastewater projects
Bachelor of Science degree in Electrical Engineering
Professional Engineer’s license
Knowledge of industrial power design, including low voltage electrical power distribution, motor control, variable frequency drives, lighting design, and equipment layout
Experience with instrumentation and control systems design, including control panels, instrumentation, operator interfaces and programmable logic controllers
Working knowledge of the National Electric Code (NEC), National Fire Protection Association (NFPA), Life Safety Codes, and other related Codes
Proficiency with AutoCAD
Qualified candidates must be legally authorized to be employed in the United States
This position is based out of our Grove City, Ohio office and requires living in Columbus, Ohio or surrounding area

Job Responsibility

performing design calculations
preparation and coordination of design drawings & specifications
review of shop drawings

Staff Power Electronics Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

163200.00 - 200000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS Degree in Electrical Engineering with 10+ years or MS with 8+ years of experience in related fields
Sound knowledge and hands-on experience in traditional and modern power electronic technologies
Low power and high power DC-DC topologies, gate driver, modulation techniques and control theories
Inverter technology for variable speed motor drive, including topologies and PWM techniques
Familiarity with both wide-band-gap and silicon power semiconductor devices
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Experience in design, build, manufacturing and testing of custom magnetics (high -frequency transformers, inductors)
Power electronics system architecture design and hardware integration
Power converters and motor drive (AC-DC, DC-DC, DC-AC) control technologies
Microcontrollers and multiple serial protocols (UART, CAN, SPI, I2C, etc.)

Job Responsibility

Design and build high voltage, high power density power electronics converter products for eVTOL applications
Develop and analyze electrical architectures and power converter (DC-DC) topologies, and ensure system functions, performance, safety and reliability requirements are achieved
Responsible for all aspects of power electronics designs required in an all-electric aircraft, from components to circuits, modules and system integration
Leads new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, component selection, modeling, prototype, product build, verification testing, safety and reliability validation and manufacturing
Design electronic power supply and sensing circuits
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to determine if the design meets functional and performance specifications
Troubleshoot and help root cause any issues that occur in the prototype line

Fulltime

Power Methodology Engineer, Data Center Hardware IPs

A senior power lead for power architecture solutions, specializing in areas like...

Location

United States , Santa Clara

Salary:

191040.00 - 286560.00 USD / Year

AMD

Expiration Date

Until further notice

Requirements

Extensive industry experience, with a specialization in low-power-processor architectures or power management
Expertise in ASIC/SoC power analysis and optimization techniques
Working experience in dynamic and leakage power estimation, analysis, and reduction at various levels (architecture, RTL, circuit design)
AI/ML Concepts: Familiarity with machine learning algorithms and their application to power simulation/optimization, as well as an understanding of NPU function and AI workload characteristics
Proficiency in hardware description languages like Verilog or VHDL, and scripting
Strong analytical skills and experience with power analysis tools (e.g., PowerArtist, PTPX)
Expertise in hardware description languages (Verilog, VHDL), scripting (Python), and simulation/analysis tools
Strong analytical and problem-solving skills to tackle complex, multidisciplinary power and performance challenges
Several years of experience in dynamic and leakage power estimation, analysis, and reduction at various levels (architecture, RTL, circuit design)
Strong scripting and automation skills, preferably in Python

Job Responsibility

Focuses on optimizing the energy efficiency and power delivery of high-performance computing hardware used in large-scale AI and machine learning applications
Driving power methodology for AI-specific hardware components (like tensor cores and matrix multiplication engines) and using simulation tools (e.g., PowerArtist, PTPX) to estimate and optimize power consumption
Workload Optimization: Analyze the power and performance characteristics of AI, Graphics, Battery life WLs, especially specific WLs for NPUs, GPUs, and CPUs
Performance/Watt Optimization: Focus on maximizing performance while staying within strict power and thermal limits, which is critical for both data center and gaming applications
Power Optimization: Estimate and analyze power consumption at various stages of chip design (architecture, RTL, physical design)
Analysis and modeling: Creating power models and scripts for performance/power trade-offs
Methodology Development: Researching, developing, and deploying methodologies and automated flows (using scripting languages like Python or Perl) to enhance power analysis efficiency
Collaboration: Working with other teams, including RTL, Architecture, Physical Design, Emulation, software, Firmware to ensure power requirements are met across the hardware-software stack
Leadership: Mentoring junior team members and providing technical leadership on complex projects

Fulltime

Engineer, Power System Controls

The Engineer, Power System Controls plays a key role in the design, development,...

Location

United States , Austin

Salary:

Not provided

Hyliion

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical, Electrical, Computer, or Systems Engineering, or Computer Science or related field
3-5 years of relevant experience
Master’s degree in Mechanical, Electrical, Computer, or Systems Engineering, or Computer Science or related field
Knowledge and experience with genset, power plant or hybrid vehicle control systems
Experience with software testing environments such as MIL, SIL
Experience with Controller Area Networks (CAN)
Experience with PLCs or embedded systems
Knowledge and experience with electrical circuits, electromechanical systems and electrical wiring
Good understanding of the V-model
Experience with Atlassian tool suite (Jira, Confluence, and Bitbucket)

Job Responsibility

Design, develop, and implement high-quality control software for Hyliion’s Karno Power Module, which includes combustion, thermal, pressure, high-voltage and power management systems
Define and conduct tests to verify software and tune control parameters to meet key performance indicators
Prepare reports and technical documentation related to system performance, control strategies, and compliance
Process and analyze data to verify software against engineering specifications, support root cause analysis and for optimizing performance
Ensure on time delivery with
Assist product team in defining customer requirements and generate corresponding engineering specifications

What we offer

Medical Plans, with PPO or HDHP options
Dental Plans, with buy-up option
Vision Plan
Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options
Short Term Disability, paid for by the company
Long Term Disability, paid for by the company
Flexible Spending Accounts (FSA)
Health Savings Account (HSA)
401k/Roth 401k
Voluntary Accident Plans

Fulltime

Power and Performance Engineer

AMD

Location:
India , Hyderabad

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
April 23, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Power and Performance Engineer

Principal Power Electronics Engineer

Power Electronics Design Engineer

Maintenance Technician - 4th Class Power Engineer

Power Engineer 4th Class

Power Systems Engineer

Staff Power Electronics Engineer

Power Methodology Engineer, Data Center Hardware IPs

Engineer, Power System Controls

Power and Performance Engineer

AMD

Location:India , Hyderabad

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:April 23, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Power and Performance Engineer

Principal Power Electronics Engineer

Power Electronics Design Engineer

Maintenance Technician - 4th Class Power Engineer

Power Engineer 4th Class

Power Systems Engineer

Staff Power Electronics Engineer

Power Methodology Engineer, Data Center Hardware IPs

Engineer, Power System Controls

Location:
India , Hyderabad

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
April 23, 2026