Piping Material Specialist Job at Airswift Sweden (London)

Geoenvironmental Engineer

We're looking for a Geoenvironmental Engineer to join our digital delivery team ...

Location

United Kingdom , Peterborough

Salary:

Not provided

MWHTreatment

Expiration Date

Until further notice

Requirements

A degree in environmental science, geology, earth sciences, or a related subject, with proven experience in land contamination, land quality or environmental science
Working towards chartership with a relevant institution (CGeol / CSci)
Preferable experience of water-sector assets and capital projects
Ideally, but not essential, experience in a Design & Build environment
Excellent communication and stakeholder management skills, able to translate complex information clearly
Proven ability to manage your own workload and support multidisciplinary teams
A commitment to sustainability, innovation, and continuous improvement
Integrity, emotional intelligence, and a collaborative, inclusive approach to working
A growth mindset, with an interest in developing both professionally and technically

Job Responsibility

Consider geoenvironmental constraints at Desk Study stage, informing early project decisions
Enable decisions that eliminate or reduce risks from contaminated ground during construction and operation
Undertake site visits to assess viability, constraints, and requirements for ground investigation and construction activities
Identify and manage specialist geoenvironmental inputs where required
Specify ground investigations, including contaminated land testing, gas monitoring, and groundwater monitoring
Provide guidance on pipe material selection for potable water based on geoenvironmental conditions
Produce interpretive Ground Investigation Reports, including chemical exceedance assessments and implications for construction
Produce geoenvironmental risk assessments and develop conceptual site models
Ensure alignment between geoenvironmental and geotechnical requirements across all project stages
Monitor the performance of ground investigation contractors and provide technical supervision of site works

What we offer

A competitive salary
Hybrid Working
Car/car allowance (Jobs needs dependent)
25 days holiday + Bank Holidays (with an additional 5 days available to buy)
Contribution Pension scheme
Life Assurance
Health Insurance
Private Medical Insurance
cycle to work scheme
discounts and savings Hub

Fulltime

New

Group Quality Manager

The Group Quality Manager (Mechanical) is responsible for leading and continuous...

Location

Ireland , Dublin

Salary:

Not provided

Designer Group Ltd

Expiration Date

Until further notice

Requirements

Recognised third-level qualification or trade qualification with extensive mechanical systems experience
Minimum 5+ years’ experience in mechanical quality assurance, quality control, or mechanical engineering leadership
Strong working knowledge of ISO 9001 quality management systems (internal auditor experience desirable)
Experience across relevant standards and codes (ASME, EN, BS, PED, WRAS, DW, ASTM, SMACNA)
Solid understanding of piping materials, fabrication, welding, installations, NDT, and testing
Ability to read and interpret P&IDs, isometrics, schematics, GAs, as-builts
European Welding Inspection qualification (e.g. CSWIP 3.1) advantageous
Experience with digital QA platforms such as Procore, Eida, or similar
Strong leadership, communication, and stakeholder management skills

Job Responsibility

Own and maintain the Group Mechanical Quality Management System (ISO 9001:2015), including IMS and related platforms
Lead mechanical quality strategy across all regions, ensuring consistent application of standards, specifications, and procedures
Act as the senior quality authority for mechanical systems across projects and fabrication environments
Provide proactive quality leadership from project startup through to mechanical completion and final handover
Support project teams with risk management, issue resolution, and compliant solutions across all quality milestones
Review installations against Designer Group quality plans, ITPs, project specifications, and client standards
Coordinate and manage the mechanical QA function, including Field QA, Test Pack Engineers, Welding Coordinators, Inspectors, and NDT specialists
Drive a “Right First Time” culture through coaching, workshops, audits, inspections, and First-of-a-Kind (FOAK) approvals
Train and mentor teams on quality best practice and continuous improvement
Own mechanical quality reporting, KPIs, dashboards, and system-of-record platforms

What we offer

Competitive salary package aligned to experience and expertise
Senior, group-wide role with real influence on delivery and standards
Long-term career development and professional training
Exposure to complex, high-profile international projects
A collaborative culture where quality, safety, and people matter

Fulltime

Civil/Structural Inspection Engineer

The successful candidate will be responsible for ensuring the quality and integr...

Location

United Kingdom , Warrington

Salary:

Not provided

Risktec Solutions

Expiration Date

Until further notice

Requirements

HNC in Civil Engineering or equivalent
Minimum of 5 years of experience in civil and structural inspection, preferably within one or more of the following industries: energy, chemicals, manufacturing, renewables, water, healthcare and public/private sectors
Strong working knowledge of principles and practices of civil engineering, design, and construction
Comprehensive understanding of applicable regulatory requirements, national building codes, and industry standards
Good understanding of structural materials (concrete, steel, masonry etc.) and common deterioration mechanisms
Familiarity with inspection of concrete standards
Ability to read and interpret blueprints, technical drawings, and specifications
Proficient in using inspection tools and equipment
Computer literacy, including experience with relevant software

Job Responsibility

Conduct thorough site inspections of civil and structural works, including buildings, steel and concrete structures, secondary containments, fireproofing, pipe bridges, underground services and pits, offshore & marine structures, bridges, and other specialist structures
Ensure compliance with design requirements, specifications, national building codes, industry guidance and regulations
Identify and document any deviations, defects, or non-conformities
Provide detailed reports and recommendations for corrective actions
Collaborate with project managers, engineers, contractors, and other stakeholders to resolve issues and maintain quality standards
Review and interpret blueprints, schematics, and construction documents
Monitor construction progress and ensure adherence to project timelines
Perform material testing and quality control checks as required
Maintain accurate records of inspections, observations, and communications
Conduct safety reviews and risk assessments to ensure compliance with safety regulations

Fulltime

Plumbing Quality Assurance Specialist

The Plumbing Quality Assurance Specialist at Power Design is the brain behind th...

Location

United States , St Petersburg

Salary:

Not provided

Power Design

Expiration Date

Until further notice

Requirements

At least three (3) years of relevant plumbing design experience
Working knowledge of constructability and strong design fundamentals for plumbing installation methods
Experience with domestic water, sanitary, vent, stormwater systems
CADD/Revit experience preferred
Able to read and interpret blueprints, submittals, specifications, and material matrix
Knowledge of plumbing system calculations, including water demand, sanitary loads, and storm drainage sizing
Experience in piping layout and coordination
Demonstrate and uphold core values, which include integrity, accountability, teamwork, innovation, and growth
A team player who always acts with customers in mind
Thrives in a constantly changing and evolving environment

Job Responsibility

Coordinate the best design solutions for plumbing systems by applying industry knowledge and quality standards while considering customer needs and budgeting requirements
Provide design direction, support, and guidance to all team members, including working directly with Revit CADD technicians to ensure quality and review constructability
Communicate effectively with customers, project team members, and inspecting authorities
Apply plumbing code knowledge (IPC, UPC, NFPA, IECC, and local jurisdiction requirements)

Skilled Trades Specialist

The Wyoming Military Department seeks a Skilled Trades Specialist for the Wyomin...

Location

United States , Guernsey

Salary:

24.78 USD / Hour

Wyoming Department of Transportation

Expiration Date

Until further notice

Requirements

Associate's Degree
0-2 years of progressive work experience (typically in Skilled Trades) with acquired knowledge at the level of a Skilled Trades Laborer
OR 2-4 years of progressive work experience (typically in Skilled Trades) with acquired knowledge at the level of a Skilled Trades Laborer
Required to obtain/maintain a Driver's License
Required to obtain/maintain Federal Security Clearance
Ability to lift up to 100 lbs
Required to work in all types of weather conditions

Job Responsibility

General maintenance, preventative, predictive, and repair of all facilities and infrastructure, interior and exterior, such as electrical, replacing bulbs and ballasts, repairing or replacing switches, controls, dialers, and other electrical components
Performs Locksmith duties
Assists in installing, repairing, and maintaining heating systems, gas systems, refrigeration systems, boiler systems, and air handling units. Also includes carpentry, rough to finish, frame, form walls, floors, sidewalks, curb and gutter, footers, build cabinets, map frames, counters, furnishings, paint, latex and oil, drywall, and texture
General maintenance, preventative, predictive, and repair of roads, grounds, parking areas, and landscaping, including operating heavy to light equipment to grade roads, haul material, snow removal, excavate, and any other type of equipment used to build or maintain road networks, repair underground pipes, parking areas, culverts, fire breaks, and ranges. Other general duties include welding, cutting, and fabricating gates, fences, and infrastructure. General repair and maintenance of water and sewer services, such as plumbing, minor and significant, pump stations, lift stations, automated sprinkler systems, irrigation systems, etc., for all Camp Guernsey infrastructure
Whether licensed or working under a licensed applicator, it facilitates weed mitigation and uses the necessary resources to spray chemicals on currently approved areas
Inspects, cleans, and maintains work trucks and inventories of all tools, equipment, and storage areas associated with this position
Admin associated with this position includes a detailed description of work performed on service orders, executes time cards and Installation Status Reports (ISRs), and attends required training
Provide inspections on all buildings and grounds to include all safety aspects. Reports back to higher for all shortcomings or requirements
Attend Meetings daily, weekly, and monthly as needed for specialized coordination and situational awareness
Other duties as assigned

What we offer

Comprehensive health, dental, and vision insurance
Paid vacation, sick leave, FMLA, and holidays
Retirement - Pension and 457B plans that help you build a secure future
Flexible schedules and work-life balance options

Fulltime

Pipe Shop Foreman

The Shop Foreman at RK plays a key role in the day-to-day operation of our struc...

Location

United States , Henderson

Salary:

38.00 - 42.00 USD / Hour

RK Mechanical, Inc.

Expiration Date

Until further notice

Requirements

Indirect supervision
Performs technical responsibilities
Contributes to the development and improvement of concepts, techniques and procedures
Coordinates own tasks with a specific range of responsibilities under established procedures
Contributes to a team under general supervision of an experienced professional or manager
Skilled specialist or recent college/university graduate
Role specific skills and experience required
Requires judgment or initiative in resolving issues and making recommendations
Supervision and guidance of crews
Work outside, inside, and in dusty, noisy and hazardous areas

Job Responsibility

Supervise and coordinate activities of assigned craft workers
Interpret company policies for workers and enforce safety regulations
Assist in establishing and adjusting work sequences to meet construction schedule using knowledge of capacities of equipment and assigned personnel
Knowledge of code standards, specifications and metals
Maintain time records
Interpret specifications, blueprints and job orders as needed for area of supervision
Direct fabrication of assemblies in shop
Assist in adjusting work sequences to meet construction schedule
Study schedules and estimate worker-hour requirements
Work within the perimeters of the projected budget

What we offer

Competitive benefits to support your growth and well-being
Hands-on training and development opportunities through RK University
Accredited apprentice program
Safety culture
Health, Safety, & Environmental focus
Philanthropic support through the RK Foundation

Fulltime

General Foreman - Pipe

The Pipefitter Foreman is a key leader on our mechanical teams, responsible for ...

Location

United States , Cheyenne, Wyoming; Fort Collins, Colorado

Salary:

35.00 - 50.00 USD / Hour

RK Mechanical, Inc.

Expiration Date

Until further notice

Requirements

Comply with all company policies and procedures
Accountable for safety and health and empowered to stop work if an unsafe condition is present
Implement and maintain all safety and health systems practices including training requirements
General Foreman Plumbing and General Foreman Lead Plumbing require a minimum of Journeyman Plumbers License
Indirect supervision
Performs technical responsibilities
Contributes to the development and improvement of concepts, techniques and procedures
Coordinates own tasks with a specific range of responsibilities under established procedures
Contributes to a team under general supervision of an experienced professional or manager
Skilled specialist or recent college/university graduate

Job Responsibility

Adhere to project schedule and orchestrate timely project completion within budgeted costs
Cooperate with project management and maintain open lines of communication regarding matters concerning project budget, productivity, change orders, and customer satisfaction
Practice, promote, and develop mentoring at all trade and manpower levels throughout the project
Devotes majority of time to work installation and installation-related duties
Assist Corporate Safety Managers as requested
Customer satisfaction and public relations liaison
Work within the perimeters of the project budget
Ensure quality craftsmanship on all mechanical system installations
Company policy and procedure compliance
Develop ‘Master Plan’ approach for project

What we offer

Competitive benefits to support your growth and well-being
Hands-on training and development opportunities through RK University
Accredited apprentice program
Leadership and technical learning opportunities

Fulltime

Project Foreman - Pipe

The Pipefitter Foreman is a key leader on our mechanical teams, responsible for ...

Location

United States , Cheyenne; Fort Collins

Salary:

35.00 - 45.00 USD / Hour

RK Mechanical, Inc.

Expiration Date

Until further notice

Requirements

Comply with all company policies and procedures
All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present
RK Mechanical employees and subcontractors are required to implement and maintain all safety and health systems practices including the training requirements of RK Mechanical Orientation, site specific orientation, CPR/First Aid/AED/Bloodborne Pathogens, Hazard Identification and Reporting, and OSHA 30
Project Foreman Plumbing require a minimum of Journeyman Plumbers License
Work outside, inside, and in dusty, noisy and hazardous areas
Work in high places, tight places, confined spaces and/or other adverse locations
Climb, balance, squat, kneel and crouch
Work in all types of weather
Must have working knowledge of all trade materials and tools
Ability to lift and carry 36 to 50 lbs. occasionally, and/or 22 to 30 pounds of force frequently, and/or greater than negligible up to 11 to 15 pounds of force constantly to move objects

Job Responsibility

Provide comprehensive onsite practical and technical direction pertaining to contract scope of work
Oversee the scheduling, coordination, and supervision of all onsite crew activities
Supervise and coordinate all on site field operations of RK Mechanical, Inc. and associated sub-contractors
Adhere to project schedule and orchestrate timely project completion within budgeted costs
Work within the perimeters of the project budget
Ensure quality craftsmanship on all mechanical system installations
Develop ‘Master Plan’ approach for project
Execute, supervise and maintain CPMI
Schedule daily and weekly scope of work activities
Material, tool, and equipment requisitions

What we offer

Competitive benefits to support your growth and well-being
Hands-on training and development opportunities through RK University
Leadership and technical learning opportunities
Accredited apprentice program
RK Foundation supporting local services

Fulltime

Piping Material Specialist

Airswift Sweden

Location:
United Kingdom , London

Category:
Energy

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Piping Material Specialist

Geoenvironmental Engineer

Group Quality Manager

Civil/Structural Inspection Engineer

Plumbing Quality Assurance Specialist

Skilled Trades Specialist

Pipe Shop Foreman

General Foreman - Pipe

Project Foreman - Pipe

Piping Material Specialist

Airswift Sweden

Location:United Kingdom , London

Category:Energy

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Piping Material Specialist

Geoenvironmental Engineer

Group Quality Manager

Civil/Structural Inspection Engineer

Plumbing Quality Assurance Specialist

Skilled Trades Specialist

Pipe Shop Foreman

General Foreman - Pipe

Project Foreman - Pipe

Location:
United Kingdom , London

Category:
Energy

Contract Type:
Not provided

Job Posted:
January 19, 2026