CrawlJobs Logo

PCB Layout Engineer

https://www.hpe.com/ Logo

Hewlett Packard Enterprise

Location Icon

Location:
United States , Aguadilla

Category Icon
Category:
-

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

Designs, analyzes, develops, modifies and evaluates electrical/electronic parts, components, sub-systems, algorithms, or integrated circuitry for electrical/electronic equipment and other hardware systems. Conducts feasibility studies, design margin and validation analyses and empirical testing on new and modified designs. Assists in architecture development and assessment. Evaluates reliability of materials, properties, designs, and techniques used in production.

Job Responsibility:

  • Lead layout floor planning and define component pinouts and fan-out strategies
  • Assess and optimize layer stack-up and routing for performance, cost, and manufacturability
  • Design and optimize high-speed bus layouts and PCB trace routing
  • Translate research and best practices into design guidelines and specifications
  • Collaborate with cross-functional teams to manage risk, prioritize design decisions, and ensure consistent design quality across platforms
  • Designs portions of engineering solutions for electrical and electronic parts, subsystems, integrated circuitry, and algorithms based on established engineering principles and in accordance with development technology practices and guidelines
  • Develops and implements parameters and test plans for existing designs, including validation of tolerances, form/fit/function, shock and vibration, electromagnetic interference, safety, reliability, thermal generation, and system power measurements
  • Collaborates and communicates with internal and outsourced development partners on electrical hardware design and development
  • Participates as a member of project team of other electrical hardware engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for low to moderately-complex products.

Requirements:

  • Bachelor's or Master's degree in Electrical Engineering
  • Typically 2-4 years experience
  • Strong understanding of PCB materials, stack-up formulas, and design trade-offs (e.g., schedule, cost, risk, and DfX)
  • Ability to develop balanced layout solutions using systematic and data-driven approaches
  • Experience in high-speed signal layout, stack-up analysis, and routing optimization
  • Effective communication skills in English, both written and verbal
  • Using electrical design tools and software packages
  • Ability to apply analytical and problem solving skills
  • Designing electronic components, integrated circuitry, and algorithms
  • Using empirical analysis, modeling and testing methodologies to validate component, circuit, and hardware designs and thermal/emissions management
  • Ability to effectively communicate design proposals and negotiate options.

Nice to have:

  • Accountability
  • Active Learning
  • Agile Methodology
  • Analytical Thinking
  • Critical Thinking
  • Creativity
  • Empathy
  • Long Term Planning
  • Growth Mindset
What we offer:
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion

Additional Information:

Job Posted:
October 14, 2025

Employment Type:
Fulltime
Work Type:
Hybrid work
Icon
Hewlett Packard Enterprise - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for PCB Layout Engineer

Senior/Staff PCB Layout Engineer

At Skydio, we’re building the world’s most intelligent autonomous drones. We’re ...
Location
Location
United States , San Mateo
Salary
Salary:
147500.00 - 210000.00 USD / Year
skydio.com Logo
Skydio
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Deep expertise in hands-on PCB layout for high-speed, high-density, and mixed-signal systems (8+ years preferred)
  • Expert in Cadence Allegro/OrCAD (v17.2+), with a proven track record designing and shipping complex boards
  • Strong grasp of signal integrity, power integrity, EMI/EMC, and impedance control principles, with practical application in layouts
  • Proficient in rigid, flex, and rigid-flex PCB design for high-performance embedded systems
  • Proven ability to mentor peers, conduct design reviews, and guide less experienced engineers while remaining a strong IC contributor
  • Excellent organizational and communication skills, with experience collaborating across EE, ME, RF, and manufacturing teams
Job Responsibility
Job Responsibility
  • Lead the layout of Skydio’s most complex PCBAs: outline definition, stack-up design, high-density placement, precision routing, and release to manufacturing
  • Mentor and guide 2 PCB layout engineers, conducting design reviews, coaching on best practices, and helping them grow as technical contributors
  • Establish and maintain design standards, libraries, and workflows to ensure consistency and scalability across multiple product generations
  • Partner closely with electrical, mechanical, RF, and manufacturing engineers to resolve trade-offs and deliver robust, manufacturable designs
  • Collaborate with PCB fabrication and assembly vendors to ensure impedance control, compliance with DFM/DFT rules, and reliable production yields
  • Drive continuous improvement in tool flows, library management, and design review processes, including opportunities for automation
What we offer
What we offer
  • Equity in the form of stock options
  • Comprehensive benefits packages
  • Relocation assistance may also be provided for eligible roles
  • Paid vacation time
  • Sick leave
  • Holiday pay
  • 401K savings plan
  • Fulltime
Read More
Arrow Right

Hardware Engineer Staff - Power Design

Designs, analyzes, develops, modifies and evaluates electrical/electronic parts,...
Location
Location
India , Bangalore
Salary
Salary:
Not provided
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 10+ years related Power Design Engineering experience
  • Solid experience with schematic capture and simulation tools (including SPICE) is essential
  • practical background with PCB Layout tools and techniques
  • familiarity with power development CAD tools such as Cadence Sigrity PowerDC also important
  • Working knowledge of communication interfaces such as I2C/PMBus as well as firmware design experience are highly desirable
  • Extensive experience with both basic and power related Electronic Lab Equipment and test methods is required
  • BSEE degree minimum and MSEE degree will be a plus
  • Strong communication skills, both verbal and written, are an important requirement for this position
Job Responsibility
Job Responsibility
  • Definition of design requirements
  • selection of critical components
  • design/simulation/schematic capture of power circuit blocks and coordination with the Board Level and PCB Layout Engineers
  • subsequent bring-up and characterization testing of the completed prototype design and introduction to manufacturing
  • system-level conceptualization
  • power supply module functional specification and full cycle of engineering development with Juniper Supplier(s) including prototype testing
  • system integration
  • documentation and manufacturing support
  • mentoring less experienced members of the power engineering team
  • developing new technology initiatives within the group
What we offer
What we offer
  • Comprehensive suite of benefits that supports physical, financial and emotional wellbeing
  • programs catered to helping you reach career goals
  • unconditional inclusion in workplace
  • flexibility to manage work and personal needs
  • Fulltime
Read More
Arrow Right

Radio Frequency (RF) Design Engineer

Silvus Technologies is seeking an RF Design Engineer who will report to the Dire...
Location
Location
United States , San Diego
Salary
Salary:
100000.00 - 150000.00 USD / Year
silvustechnologies.com Logo
Silvus Technologies (International)
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelors of Science degree (or higher) in Electrical Engineering
  • Minimum 2 years of multi-GHz RF hardware development experience
  • Good working knowledge of RF board layout, fabrication, and packaging
  • Hands-on experience with solving EMI, harmonics, spurious, and stability issues
  • Experience using RF simulation tools (i.e. AWR Microwave Office, Altium)
  • Must be a U.S. Person (permanent resident or citizen) due to U.S. government contracts
  • Employment is contingent upon the successful clearance of a background check
Job Responsibility
Job Responsibility
  • Antenna to baseband RF subsystem design using discrete circuitry or highly integrated RFICs
  • Discrete design includes PLL, LNA, Mixers, PA etc
  • Implementing or supervising schematic capture and PCB layout
  • RF performance characterization, tuning, and troubleshooting
  • Overall system design to ensure good EMI performance
  • Ensure circuit board design and overall radio product can pass emission and immunity regulations
  • Troubleshoot RF-related production yield problems
  • Improve design for manufacturability
  • Rare local travel to other company locations, as required (i.e. Irvine, West LA)
  • Fulltime
Read More
Arrow Right

Senior Radio Frequency (RF) Design Engineer

Silvus Technologies is seeking a Senior RF Design Engineer who will report to th...
Location
Location
United States , San Diego
Salary
Salary:
140000.00 - 190000.00 USD / Year
silvustechnologies.com Logo
Silvus Technologies (International)
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelors of Science degree (or higher) in Electrical Engineering
  • Minimum 5 years of multi-GHz RF hardware development experience
  • Good working knowledge of RF board layout, fabrication, and packaging
  • Hands-on experience with solving EMI, harmonics, spurious, and stability issues
  • Experience using RF simulation tools (i.e. AWR Microwave Office, Altium)
  • Must be a U.S. Person (permanent resident or citizen) due to U.S. government contracts
  • Employment is contingent upon the successful clearance of a background check
Job Responsibility
Job Responsibility
  • Antenna to baseband RF subsystem design using discrete circuitry or highly integrated RFICs
  • Discrete design includes PLL, LNA, Mixers, PA etc
  • Implementing or supervising schematic capture and PCB layout
  • RF performance characterization, tuning, and troubleshooting
  • Overall system design to ensure good EMI performance
  • Ensure circuit board design and overall radio product can pass emission and immunity regulations
  • Troubleshoot RF-related production yield problems
  • Improve design for manufacturability
  • Rare local travel, as required by Silvus (i.e. Irvine, West LA)
  • Fulltime
Read More
Arrow Right

R&D Hardware Engineer

Early career electrical/electronic engineer will design, analyze and develop sys...
Location
Location
United States , Roseville
Salary
Salary:
60800.00 - 140400.00 USD / Year
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS or MS in Electrical/Electronic Engineering or Computer Engineering
  • Experience with schematic capture and PCB layout tools
  • Fundamental understanding of instrumentation and probing theory and practice
  • Practical experience with oscilloscopes, network analyzers and measurement techniques
  • Understanding of components, signals and circuits through means of bode plots and impedance measurements
  • Experience with Python or other scripting languages
Job Responsibility
Job Responsibility
  • Digital circuit design and analysis for new and existing high speed ethernet switches
  • Schematic capture and PCB layout of new designs and modification of existing designs
  • Development, planning and execution of test plans including electrical and functional verification of new designs
  • Support extended teams (software, manufacturing, test) in bring-up, validation and product introduction
What we offer
What we offer
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
  • Fulltime
Read More
Arrow Right

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
  • Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
  • Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
  • Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
  • Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
  • Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
  • Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
  • Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
  • Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired
Job Responsibility
Job Responsibility
  • Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
  • Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
  • Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
  • Perform debug, failure analysis, and rework of electronics systems, circuits, and components
  • Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
  • Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
  • Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
  • Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
  • Assess and document design change outcomes, test results, and related information and present information to design teams and management
  • Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Fulltime
Read More
Arrow Right

Sr. Electrical Engineer, Sustaining

As a member of the TASER Electrical Engineering Sustaining team, you will be res...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • Six years of industry experience in electronics design and sustaining for mass-produced, handheld, embedded, battery-powered consumer devices
  • Expertise in identifying and implementing alternative electronic components or circuit design modifications to enhance performance, address obsolescence, and optimize supply chain efficiency for released mass-production electronics
  • Proficient in executing design changes across bill of materials, schematics, and layouts to support identified product changes/updates
  • Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
  • Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDOs), microcontrollers, memory subsystems (FLASH, EEPROM), switches, connectors, communication interfaces (SPI, UART, I2C), indication LEDs, displays, LASERs, electromechanical transducers, hall effect sensors, inertial measurement units, accelerometers, protection circuitry (ESD, voltage, and current limiting components), discrete resistors/capacitors/inductors, rechargeable batteries and charging/balancing circuitry, RF subsystems (BLE, WiFi) for flex, rigid, and rigid-flex PCB designs
  • Strong hands-on expertise in electronics verification, characterization, and failure analysis, utilizing lab equipment such as oscilloscopes, power supplies, multimeters, custom test jigs and software related tools
  • Experience collaborating with laboratory technicians on circuit and component rework. Skilled in coordinating or performing component replacement and rework
  • hands-on soldering skills are a strong plus. Knowledgeable in rework processes, with the ability to execute directly or manage internal and external rework activities
  • Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired
Job Responsibility
Job Responsibility
  • Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics associated with TASER devices and accessories
  • Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
  • Execute bench-level verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, power supplies, multimeters, logic analyzers, and custom related test equipment and software tools
  • Perform debugging, failure analysis, and rework of electronic systems, circuits, and components to identify and confirm root cause of issues associated with updated design changes or RMA returns. This includes close collaboration with the failure analysis team to conduct CT scans on suspect assemblies and the use of functional circuit testers in production to validate final issue resolution
  • Using OrCAD schematic design tools, improve or modify embedded mixed-signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display/LASER circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, high-speed and low-speed data interfaces, electromechanical transducers, and other discrete digital and analog components for flex, rigid, and rigid-flex PCB designs
  • Partner with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro and other layout tools
  • Develop test methods, execute system and component-level verification, and lead test planning efforts to evaluate electronics design changes
  • Team with validation and other engineering teams to evaluate and document design update outcomes, test results, and related information, then present findings to management for review and further action
  • Update and help to finalize assembly drawings, bill of materials, Geber files, and other design documentation needed to support updated design change releases
  • Knowledge sharing, mentoring, and close collaboration with other team members and departments
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • snacks in our offices
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer, Video

As a Senior Member of Axon's Video Electrical Engineering team, you will lead th...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • 7+ years of industry embedded electronics design experience with a major focus on designing high-speed, high-density, portable, battery-powered devices, robotics, or low-power vehicular embedded circuits
  • Creative and passionate about innovative design and cutting-edge technology
  • Demonstrated ownership of embedded electronics design across multiple subsystems
  • Skilled in high-speed, high-density hardware design, including system architecture development, component selection, schematic design, PCB layout management, design verification testing and debug
  • Proficient leading electronics design and development from concept to mass production
  • Experience with technical oversight of design partners, ODMs, and JDMs leading to successful electronics design
  • Strong proficiency with point of load power supply design (Switch mode, linear regulators), PMIC integration, power tree development, and power consumption analysis
  • Experience with Lithium batteries and battery charging circuit design
  • Experience with RF transceiver integration including LTE, Wi-Fi, and GNSS
Job Responsibility
Job Responsibility
  • Own the design of critical electronic circuits and systems
  • Collaborate globally with cross-functional engineering teams to deliver world-class products
  • Mentor and inspire junior engineers, fostering technical growth across the team
  • Research, propose, and develop innovative, industry leading circuit designs for Axon’s future-generation video products, wired and wireless devices, and/or low power accessories
  • Lead project team EE’s and design partners, joining forces to achieve successful completion of hardware objectives
  • Use OrCAD to create embedded mixed-signal circuit schematics, integrating components like application processors, image sensors, high speed memory, high speed digital communication buses, RF transceivers, power supplies, battery charging systems, and more
  • Partner with PCB Design engineers to define, review, and optimize printed circuit board layout designs using Allegro or other layout tools
  • Bring up, characterize, optimize, and debug systems and circuits using lab tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
  • Team up with RF Engineers to integrate and validate critical RF circuitry for wirelessly connected devices
  • Assess design outcomes, test results, and related information and present findings to design team and management
What we offer
What we offer
  • Competitive salary and 401K with employer match
  • Paid time off at your discretion
  • Robust parental leave policy
  • An award-winning office/working environment
  • Ride along with police officers to see them use our technology and get inspired
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy