Painting Insulation Engineer Job at Airswift Sweden (Nanterre)

Construction Insulation and Painting Supervisor

The Painting Supervisor directs Subcontractor activities for Painting activities...

Location

United Arab Emirates , Ruwais

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

University Degree or Diploma in relevant discipline or equivalent
NACE, FROSIO or similar certification.

Job Responsibility

Prior to the start of works, to check the Supplier’s material and technical documentation delivery schedule
Check that the same is in line with Construction schedules and contractual commitments
To check that the said schedule is kept to, and to promote action to recover any delay
To check that the equipment and manpower employed by the Subcontractor are adequate and that the works performed by the Subcontractor conform to design documents, Safety regulations, and to the Quality level fixed by the same
To prepare the non-conformity register for each Subcontractor and co-ordinate non-conformity resolution
To detect any design errors, and where possible rectify the same or request the Site Engineer to make the necessary changes
To check Subcontractors’ work progress status sheets and sign the same for approval
To manage vendor specialists
To assist the Contract Engineer in defining new prices, in preparing amendments to subcontracts and in analysing and discussing claims.

What we offer

Attractive benefits and long-term career opportunities

Construction Insulation and Painting Supervisor

The Painting Supervisor directs Subcontractor activities for Painting activities...

Location

United Arab Emirates , Al Ruwais

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

University Degree or Diploma in relevant discipline or equivalent
NACE, FROSIO or similar certification

Job Responsibility

Prior to the start of works, to check the Supplier’s material and technical documentation delivery schedule
Check that the same is in line with Construction schedules and contractual commitments
To check that the said schedule is kept to, and to promote action to recover any delay
To check that the equipment and manpower employed by the Subcontractor are adequate and that the works performed by the Subcontractor conform to design documents, Safety regulations, and to the Quality level fixed by the same
To prepare the non-conformity register for each Subcontractor and co-ordinate non-conformity resolution
To detect any design errors, and where possible rectify the same or request the Site Engineer to make the necessary changes
To check Subcontractors’ work progress status sheets and sign the same for approval
To manage vendor specialists
To assist the Contract Engineer in defining new prices, in preparing amendments to subcontracts and in analysing and discussing claims

What we offer

Attractive benefits and long-term career opportunities

Fulltime

Principal Engineer, Outfitting

The Principal Engineer, Outfitting oversees designing, reviewing, and carrying o...

Location

Canada , North Vancouver

Salary:

143100.00 - 174900.00 CAD / Year

Washington Corporations

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in a relevant engineering subject area, Master’s degree preferred
Professional Engineering designation in the Province of British Columbia is optional
Minimum 15 years of post-secondary experience in ship operations, in-service support, and/or ship design and construction environments
20+ years preferred
Understanding of CADMATIC, ShipConstructor, AutoCAD, document control systems, and databases
Knowledge of MRP, purchasing, and management systems is preferred
Experience in complex vessel integration
Experience in supervising and developing personnel, with the ability to guide and mentor team members
Strong organizational and interpersonal skills with experience in diverse, multidisciplinary teams
Analytical skills to gather, analyze, or synthesize data, confirming its accuracy and adequacy as part of the collective analysis or synthesis process

Job Responsibility

Provides engineering and design expertise in Marine Outfitting Systems, including fire protection, insulation, structural openings, stairs, handrails, paint, gratings, lifesaving gear, cranes, winches, davits, and interior joiner design
Prepare design and calculation packages for contract compliance
Analyzes information, identifies methods, processes, steps, and needed plant, machinery, and equipment to design and improve manufacturing or material systems, ensuring the final product meets cost and quality standards
Designs engineering solutions and validates the process to achieve a design brief that meets organizational and regulatory standards
Provides technical authority, delegates to engineers, and approves changes to requirements
Analyzes information, drafts engineering standards and specifications, and assesses the effectiveness of these standards within one's engineering discipline to ensure work meets quality requirements
Provides guidance on engineering tasks for the organization and its suppliers, contractors, and consultants
Performs inspections to assess the quality of complex, large-scale engineering projects or the integrity of existing extensive installations or structures and determines the necessary remedial actions to ensure compliance with specifications and regulations
Establishes maturity targets and reviews completion at gate reviews
Uncovered emerging issues or needs, identifying potential causes, barriers, and key stakeholders, as well as related topics

What we offer

Annual bonus
Pension plan matching
Extended health care (paramedical services for massage therapy, speech therapy, mental health coverage, physiotherapy, and more)
Dental care
Vision care
Life insurance
Medical leave coverage
Parental leave coverage
$500 personal spending account
Employee Family Assistance Program (EFAP)

Fulltime

Instrument Planner

The Instrument Planner is responsible for planning, scheduling, and coordinating...

Location

United States , Port Arthur

Salary:

55.00 - 62.00 USD / Hour

INSPYR Solutions

Expiration Date

Until further notice

Requirements

High School Diploma or GED required
Technical degree or equivalent experience preferred
Minimum of 5 years of maintenance planning experience utilizing SAP within oil and gas or petrochemical facilities
Advanced working knowledge of SAP S/4HANA
Strong understanding of maintenance planning, scheduling, and execution processes, procedures, and industry best practices
Experience building and configuring scheduling software systems preferred
Prometheus experience strongly preferred
Experience with project planning tools such as Primavera P6 or Microsoft Project preferred
Proven experience planning and scheduling small to medium-sized projects
Knowledge of work estimation and planning for disciplines including scaffolding, painting, insulation, rigging/lifting, welding, fabrication, machining, and heavy equipment operations

Job Responsibility

Plan, schedule, and coordinate maintenance and reliability programs for assigned assets
Develop, maintain, and optimize project, maintenance, and outage schedules using approved planning and scheduling software
Prioritize work to ensure rapid response, effective backlog management, and cost control
Develop comprehensive job packages that include all required documentation, materials, and execution details
Coordinate work order development and scheduling activities with Operations, Maintenance, Engineering, and supervisory personnel
Prepare and manage weekly, monthly, quarterly, and long-range look-ahead schedules for both expense and capital work
Coordinate manpower availability and dispatching of work in collaboration with supervision
Provide technical support to users of CMMS modules and planning systems
Ensure work orders are complete, accurate, and properly documented prior to execution
Identify material requirements and coordinate with vendors and supply chain personnel as needed

What we offer

Comprehensive medical benefits
Competitive pay
401(k) Retirement plan

Fulltime

Planner/Scheduler

One of our major oil and gas clients is seeking a Planner/Scheduler to work on a...

Location

United States , Sabine Pass

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum High School Diploma or GED
5 plus years of maintenance experience utilizing SAP in the Oil and Gas, or petrochemical facilities
Heavy working knowledge of SAP S/4HANA
Strong knowledge and experience in Planning, Scheduling and Execution processes, procedures, and best practices
Scheduling of small to medium scale projects
Experience with scaffolding, painting, insulating, heavy equipment operation-rigging/lifting crafts, welding, fabrication, machining work estimation and planning
Strong experience with Microsoft Office Suite

Job Responsibility

Scheduling of maintenance & reliability programs for the asset
Create and maintain project and outage schedules utilizing planning software
Plans and prioritizes work for fast and efficient response, effective backlog maintenance and cost control
Creates job packs, including all relevant information for job plans
Coordinates the development of work orders and schedules with Operations and Maintenance personnel
Develops and completes weekly, monthly, quarterly, look-ahead schedules for expense and upgrade work by working closely with functional supervisors, engineering and technicians
Manages the dispatching of work and availability of manpower in coordination with supervision
Provides technical support for personnel within the CMMS modules
Ensures proper documentation for work orders is in place
Identifies material requirements and interfaces with vendor and/or supply chain as needed

Fulltime

Lead, Joiner Outfit

The Lead, Joiner Outfit is responsible for the leadership and development of the...

Location

Canada , North Vancouver

Salary:

119700.00 - 146300.00 CAD / Year

Washington Corporations

Expiration Date

Until further notice

Requirements

Bachelor's degree in a relevant Engineering or Naval Architecture discipline
Professional Engineer or Incorporated Engineer designation with a recognized, accredited institution
5+ years of design management and leadership experience in a shipyard or marine design firm
10+ years of design experience in the shipbuilding industry
Experience of supplier technical management
Experience of Earned Value Management
Management skills and ability to lead a large and diverse technical team
In-depth understanding of the shipbuilding design process
Technical, analytical and change management skills
Negotiating and communication skills

Job Responsibility

Develop, staff, and line manage a team within their department and allocate the required resources to the ongoing projects under the matrix organization structure
Develop Statements of Work (SOW), Master Product Lists (MPL) and hours estimates for task proposals
Develop and maintain a discipline resourcing plan and lead on any required recruitment activities
Support the Manager/Senior Manager with Control Account Manager (CAM) duties for a discipline within their department and any subcontracted scopes, responsible for cost and schedule adherence across all programs
Develop and implement governance processes that comply with Engineers and Geoscientists BC (EGBC) requirements
Advance training and development plans and paths for engineers within the discipline as well as actively address performance issues within the teams
Develop, implement, and improve engineering design standards that best support efficient design and build practices
Drive teams to develop required functional engineering plans and processes which support the execution of project work across a value stream
Provide technical and execution support to the Project Engineering Manager or Project Chief Engineer as required
Provide engineering and design expertise in assigned areas of Marine Outfitting Systems including such elements and components as

What we offer

Annual bonus
Pension plan matching
Competitive salary
Extended health care (paramedical services for massage therapy, speech therapy, mental health coverage, physiotherapy, and more)
Dental care
Vision care
Life insurance
Medical leave coverage
Parental leave coverage
$500 personal spending account

Fulltime

New

Supply Teacher

Affinity Workforce Solutions are working in collaboration with a well-establishe...

Location

United Kingdom , Keynsham

Salary:

Not provided

AFFINITY WORKFORCE

Expiration Date

Until further notice

Requirements

QTS or QTLS status in the UK
Right to work in the UK
Enhanced DBS certificate on the update service/be willing to put one in process
Ability to provide references for the last two years

Job Responsibility

To provide well-planned lessons in line with the National Curriculum
Liaise with parents regarding pupils progress and well-being
Work with Teaching Assistants to support less able pupils to achieve better outcomes
Assist in the development of the Curriculum
Be responsible for monitoring, assessing, reporting, recording and evaluation of learning experiences
Promote opportunities for peer and social interaction to develop confidence, resilience and social skills
To plan, organise, mark work whilst also attending staff planning meetings

What we offer

Flexible working and Guaranteed pay schemes
Competitive pay and paid to scale of the role
Access to exclusive retail discounts and rewards
£200 referral scheme*
24/7 GP service
Reward scheme offering vouchers and highstreets discounts

New

Silicon Validation Engineer

The Reality Labs team is building products that make it easier for people to con...

Location

Taiwan , Taipei

Salary:

Not provided

Painting Insulation Engineer

Airswift Sweden

Location:
France , Nanterre

Category:
Energy

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Painting Insulation Engineer

Construction Insulation and Painting Supervisor