Paint Plant Operative Job at Randstad (Desford)

Plant Operator I

The Stationary Engineer will safely and reliably work alongside licensed enginee...

Location

United States , Houston

Salary:

Not provided

Veolia

Expiration Date

Until further notice

Requirements

High School Diploma/GED is required
Some experience with plumbing, electrical, and HVAC would be an advantage
Demonstrated maturity, reliability, and judgment to stand watch as a Control Operator
Ability to work rotating shifts involving weekends, holidays, backshifts, and overtime is required
Must have high mechanical aptitude level
Must be able to read, write, and speak English fluently
Must have basic computer skills
Must hold a valid driver license with a satisfactory driving record to maintain minimum company required insurance coverage
Ability to tolerate confined spaces, tolerate heights, lift heavy equipment and carry materials up and down stairs with the capacity of lifting 50 pounds
Must be able to walk a minimum of three miles per day

Job Responsibility

Maintains safe working conditions: identifies and corrects or reports unsafe conditions in work area
Will stand watch as Operator or Auxiliary Operator and may oversee technical personnel
Operates boilers, centrifugal water cooled chillers controls, and ancillary equipment
manages pressure, temperatures, and flow of steam system, including boilers, feed-water, and distribution systems
Controls boiler and feed-water quality
oversees fuel oil and natural gas transfer and storage at assigned plant
When assigned a Control Operator watch, will oversee the operations at either a peaking or remote plant during the watch
During backshifts, weekends, and holidays, may act as the primary representative for contact with customers and the public requiring accurate logging of complaints and resolution of the problems or passing of the information on to the appropriate supervisor
Will provide operational and maintenance support for complex. This includes: lighting, plumbing, HVAC, life safety, electrical repair, cleaning, and painting

What we offer

paid time off policies
health, dental and vision insurance
employer sponsored 401(k) plan

Fulltime

Paint Shop Process Engineer

Location: Factory ZERO – Detroit-Hamtramck Assembly Center Work Location: Onsit...

Location

United States , Detroit

Salary:

Not provided

General Motors

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering (Mechanical, Electrical, Chemical, Manufacturing, or related field) with 1–3 years of experience in automotive manufacturing, preferably paint or automation, OR 3–5 years of directly relevant experience in paint and/or automation in lieu of a degree
1–3 years (with degree) or 3–5 years (without degree) of automotive manufacturing experience, with emphasis on paint shop operations (e.g., PT/ED, Sealer, Topcoat, Paint Mix Room)
Knowledge of automotive paint process areas (PT/ED, Sealer, Topcoat, Paint Mix Room)
Proven technical and professional skills in manufacturing or assembly plant operations
Ability to interpret blueprints and engineering drawings and learn new systems quickly
Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook)
Comfortable supervising hourly employees and coordinating work across multiple groups
Strong communication, planning, and organizational skills
High level of interpersonal skills to work effectively with cross-functional teams and union partners
Demonstrated ability to work as part of an innovative team and independently

Job Responsibility

Design, construction, integration, installation, and continuous improvement of paint shop equipment and tooling required to manufacture high-quality products
Own and execute SORs and project management for tools, stations, or specific paint technologies
Define manufacturing processes, including sequence of operations, equipment parameters, and standard work
Incorporate human factors and ergonomic considerations into process and equipment designs (employee–machine interface)
Ensure efficient material flow into, through, and out of paint process areas
Provide technical direction and oversight to plant personnel and 3rd party vendors/contractors
Lead and support development and testing of advanced paint process technologies, including new materials, application methods, and robotics
Provide detailed feedback to central process champions and engineering teams to drive global best practices
Ensure that paint processes are maintained and running effectively for vehicle production
monitor and adjust as necessary

What we offer

This job may be eligible for relocation benefits

Fulltime

Operations & Maintenance Technician II

Crusoe is seeking a skilled Operations & Maintenance Technician II (OMT II) to e...

Location

United States , Abilene

Salary:

41.00 - 47.00 USD / Hour

Crusoe

Expiration Date

Until further notice

Requirements

High School diploma or equivalent is required
Ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs
Comprehensive knowledge of mechanical, instrumentation, and electrical equipment, including proficiency in repairing, replacing, and dismantling defective parts
Adept at diagnosing problems with mechanical equipment and performing water chemistry analysis
Strong verbal and written communication skills with the ability to train other personnel and write operating procedures
Capable of operating welding and cutting equipment, as well as tools such as drill presses, pipe threading machines, and grinders
Ability to perform walking, reaching, climbing, and lifting up to 50 pounds
Willingness to work a 12-hour rotating shift and be available for call-ins and work overload as needed
Must be authorized to work in the USA
This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required.

Job Responsibility

Plant Operations & Maintenance: Operate and maintain simple cycle power generating facility equipment, including heat recovery steam generators, air compressors, and fire suppression systems, with minimal guidance or assistance
Technical Troubleshooting & Repair: Adeptly troubleshoot, diagnose, and repair defective plant equipment such as pumps, valves, fans, gearboxes, and turbine components in a timely fashion
System Inspections & Data Recording: Perform an "Inspection of Watch" on each plant system and record data from meters and gauges—including temperature, vibration, fluid levels, and water chemistry—to verify operating conditions
Water Chemistry Management: Perform analysis on HRSG, auxiliary boiler, and cooling tower systems, making necessary adjustments to chemical feed and blowdown rates to ensure chemistry remains within proper control ranges
Electrical & Mechanical Tasks: Responsible for opening and closing circuit breakers for system operation or electrical isolation, and performing piping and conduit installation for plant upgrades
Operational Documentation: Utilize the facility’s computerized maintenance management system (CMMS), assist with the development of O&M procedures, and write routine reports or work requests
Safety & Regulatory Adherence: Strictly adhere to all safety and environmental rules, facility safety programs, and plant environmental permits to protect personnel and public safety
Cross-Functional Collaboration: Coordinate with vendors for chemical ordering and timely equipment repairs, and assist in performing Root Cause Analysis (RCA) of failures
Continuous Improvement: Perform general housekeeping and painting projects to maintain the cleanliness and appearance of all plant areas and the control room.

What we offer

Restricted Stock Units in a fast growing, well-funded technology company
Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
Employer contributions to HSA accounts
Paid Parental Leave
Paid life insurance, short-term and long-term disability
Teladoc
401(k) with a 100% match up to 4% of salary
Generous paid time off and holiday schedule
Cell phone reimbursement
Tuition reimbursement

Fulltime

Operations & Maintenance Technician

Crusoe is seeking a dedicated Operations & Maintenance Technician (OMT) to ensur...

Location

United States , Abilene

Salary:

33.00 - 38.00 USD / Hour

Crusoe

Expiration Date

Until further notice

Requirements

High School diploma or equivalent is required
Demonstrable knowledge of all facets of power plant operations and the ability to make competent decisions in emergency situations
Ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs
Proficiency in troubleshooting mechanical, instrumentation, and electrical equipment, as well as operating welding and cutting equipment
Good verbal and written communication skills and proficiency in Microsoft Office, specifically Excel and Word
Ability to walk, reach, climb, and lift up to 50 pounds
Willingness to work 12-hour rotating shifts and availability for call-ins or work overload as needed
Must be authorized to work in the USA
This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required.

Job Responsibility

Operate and maintain a simple cycle power generating facility and its auxiliary equipment, including heat recovery steam generators, air compressors, and fire suppression systems with minimal guidance
Identify and resolve CEMS problems, perform Root Cause Analysis of failures, and repair defective plant equipment such as pumps, valves, and gearboxes
Conduct "Inspection of Watch" on all plant systems and read meters or automatic devices to record temperatures, vibrations, fluid levels, and water chemistry to verify operating conditions
Perform analysis on HRSG, auxiliary boiler, and cooling tower systems
control chemical feed and blowdown rates to maintain proper control ranges
Open and close circuit breakers for system operation or electrical isolation, and perform piping and conduit installation for plant upgrades
Utilize the facility’s computerized maintenance management system (CMMS) and assist with the development of Operations and Maintenance procedures
Coordinate with vendors for chemical ordering and equipment repair, work with Plant Management on capital projects, and assist in administering the Operator training program
Perform general housekeeping, painting, and continuous improvement tasks to maintain the appearance and cleanliness of the plant and control room.

What we offer

Restricted Stock Units in a fast growing, well-funded technology company
Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
Employer contributions to HSA accounts
Paid Parental Leave
Paid life insurance, short-term and long-term disability
Teladoc
401(k) with a 100% match up to 4% of salary
Generous paid time off and holiday schedule
Cell phone reimbursement
Tuition reimbursement

Fulltime

Operations & Maintenance Technician

Crusoe is seeking a dedicated Operations & Maintenance Technician (OMT) to ensur...

Location

United States , Abilene

Salary:

33.00 - 38.00 USD / Hour

Crusoe

Expiration Date

Until further notice

Requirements

High School diploma or equivalent is required
Demonstrable knowledge of all facets of power plant operations and the ability to make competent decisions in emergency situations
Ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs
Proficiency in troubleshooting mechanical, instrumentation, and electrical equipment, as well as operating welding and cutting equipment
Good verbal and written communication skills and proficiency in Microsoft Office, specifically Excel and Word
Ability to walk, reach, climb, and lift up to 50 pounds
Willingness to work 12-hour rotating shifts and availability for call-ins or work overload as needed
Must be authorized to work in the USA
This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required.

Job Responsibility

Operate and maintain a Combined Cycle power generating facility and its auxiliary equipment, including heat recovery steam generators (HRSG), air compressors, and fire suppression systems with minimal guidance
Identify and resolve CEMS problems, perform Root Cause Analysis of failures, and repair defective plant equipment such as pumps, valves, and gearboxes
Conduct "Inspection of Watch" on all plant systems and read meters or automatic devices to record temperatures, vibrations, fluid levels, and water chemistry to verify operating conditions
Perform analysis on HRSG, auxiliary boiler, and cooling tower systems
control chemical feed and blowdown rates to maintain proper control ranges
Open and close circuit breakers for system operation or electrical isolation, and perform piping and conduit installation for plant upgrades
Utilize the facility’s computerized maintenance management system (CMMS) and assist with the development of Operations and Maintenance procedures
Coordinate with vendors for chemical ordering and equipment repair, work with Plant Management on capital projects, and assist in administering the Operator training program
Perform general housekeeping, painting, and continuous improvement tasks to maintain the appearance and cleanliness of the plant and control room.

What we offer

Restricted Stock Units in a fast growing, well-funded technology company
Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
Employer contributions to HSA accounts
Paid Parental Leave
Paid life insurance, short-term and long-term disability
Teladoc
401(k) with a 100% match up to 4% of salary
Generous paid time off and holiday schedule
Cell phone reimbursement
Tuition reimbursement

Fulltime

Millwright

Come join a global leader in pipe joining solutions! Victaulic has what you’re l...

Location

United States , Forks Township

Salary:

Not provided

Victaulic

Expiration Date

Until further notice

Requirements

To aid in the manufacture and shipment of quality iron castings by means of installation, service, repair, operation, and inspection of all mechanical, hydraulic, pneumatic, and minor electrical portions of all facility equipment including production and maintenance equipment, buildings and structures, plant vehicles, services and utilities for Victaulic Company
Perform repairs to building and property in production areas
Know emergency procedures covering power failure, iron spillage, water failures, etc.
To know and follow proper safety procedures including proper operation of equipment, rigging and lifting, welding, cutting, handling of hazardous materials, and working from ladders, scaffolds, overhead structures
To aid in the manufacture and shipment of quality iron castings by means of maintaining, inspecting, servicing, repairing, cleaning and painting all plant vehicles, material handling equipment, mobile cranes
to troubleshoot and perform all mechanical and electrical repairs to this equipment
To know and follow all reliability procedures process control requirements, testing procedures and job description cards as they relate work being performed
To know and follow at all times proper safety procedures and to wear the prescribed safety equipment as they relate to the work being performed
To report neatly and accurately work performed, findings or results of inspections, and time and materials used in completion of assigned work
To maintain work area in neat and clean condition and assure that materials and tools are returned to proper storage and all waste and debris is removed upon completion of assigned work

Job Responsibility

To aid in the manufacture and shipment of quality iron castings by means of installation, service, repair, operation, and inspection of all mechanical, hydraulic, pneumatic, and minor electrical portions of all facility equipment including production and maintenance equipment, buildings and structures, plant vehicles, services and utilities for Victaulic Company
Perform repairs to building and property in production areas
Know emergency procedures covering power failure, iron spillage, water failures, etc.
To aid in the manufacture and shipment of quality iron castings by means of maintaining, inspecting, servicing, repairing, cleaning and painting all plant vehicles, material handling equipment, mobile cranes
to troubleshoot and perform all mechanical and electrical repairs to this equipment
To report neatly and accurately work performed, findings or results of inspections, and time and materials used in completion of assigned work
To maintain work area in neat and clean condition and assure that materials and tools are returned to proper storage and all waste and debris is removed upon completion of assigned work
To report immediately to his Foreman or Supervisor any injury, unsafe act or condition, or any failure or impending failure of plant equipment
To perform his duties in such a manner as to assure the uninterrupted operation of the Facility and the continuation of Victaulic Company as a clean, safe place of employment
Actively participate in SRP, VPDS, and any other Company initiative designed to improve workplace efficiency, eliminate waste, and improve quality

What we offer

The Morning Calls Top Work Place
Opportunity for growth and Innovation
VPP World Class Safety Program
Company Events
Company Matched 401k Plan
Comprehensive Healthcare Benefits
Employee Assistance Program
Education Assistance / Tuition Reimbursement Program
Wellness Program
Medical

Fulltime

Wastewater Plant Operator

Under general supervision, performs responsible work in operating and maintainin...

Location

United States , Cleveland

Salary:

Not provided

Engage Cleveland

Expiration Date

Until further notice

Requirements

High school diploma, GED or state recognized equivalent
Three (3) years of experience performing skilled work in the operation and maintenance of steam turbines and boilers
Current and valid Stationary Engineer’s License issued by the State of Ohio
Valid driver’s license with a driving record in accordance with the District’s acceptable guidelines
Knowledge of the hazards and safety precautions of the trade
Ability to operate and maintain a variety of stationary engines, boilers and associated equipment
Ability to read and understand operating manuals, blueprints, drawings, keep records and follow oral and written instructions
Ability to maintain sound judgments and decisions based on interpretation of data
Ability to work unscheduled hours during emergency, unusual situations and/or filling in for vacant shifts, including rotating shifts
Physical ability to lift up to 80 lbs. on an occasional basis, lift and stack 80 lbs. bags of salt, exert up to 46 lbs. of push/pull force to move 55 GL drums, lift and control brine bags

Job Responsibility

Operates and maintains wastewater treatment facilities and equipment
Operates fluidized-bed incinerators, steam generating facilities, steam turbines and associated compressors, pumps, motors and valves
Maintains proper operating conditions of the Waste Heat Boiler
Oversees and operates high pressure steam boiler systems, including Water Treatment and Reverse Osmosis
Inspect and replace ion exchange tanks
Performs the startup and shut down of preheat burners and scrubber system
Monitors sand levels in the Sand Silo System and replenishes sand beds
Monitor and replenish softener tank by adding salt
Monitors and maintains the Ash System
Operates units by controlling and monitoring equipment and processes manually and through control systems

What we offer

Health Insurance Coverage
Various Retirement Planning Options (Ohio Public Employee Retirement System and Deferred Compensation Plans)
Flexible Spending Accounts
Employee Assistance Program
Free Parking at our facilities
Corporate Discounts
Active Health & Wellness Program that promotes a life/work balance

Fulltime

Wastewater Treatment Plant Operator

Opportunity to join an industry leader and trusted first choice in remedial cons...

Location

United States , Portland

Salary:

28.00 - 38.00 USD / Hour

Sevenson Environmental Services, Inc.

Expiration Date

Until further notice

Requirements

Be able to follow written, spoken instructions and diagrams
Be able to follow health and safety regulations
Be accurate and observant at all times
Have good numeracy skills
Be practical and comfortable using new technology, including computers
Be able to solve problems
Work well as part of a team and on their own initiative
Have a good level of fitness and stamina
Be willing to cope with unpleasant smells and substances
Be prepared to work unsocial hours

Job Responsibility

Control equipment and monitor processes
Run tests to make sure that the processes are working correctly
Keep records of water quality and other indicators
Operate and maintain the pumps and motors that move water and wastewater through filtration systems
Adjust the amount of chemicals, such as Sodium Hypochlorite, Sodium Hydroxide, and Sulfuric Acid, being added to the water
Use computerized systems to monitor plant processes
Fix chemical leaks
Keep records that document compliance
Perform grounds keeping, including snow removal with plow, snow blower, and shovel
painting of structures, pipes, and equipment

What we offer

Extensive company-provided benefit package includes medical, dental, prescription, 401k, and pension plan

Fulltime

Paint Plant Operative

Randstad

Location:
United Kingdom , Desford

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
May 11, 2026

Expiration:
July 13, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Paint Plant Operative

Plant Operator I

Paint Shop Process Engineer

Operations & Maintenance Technician II

Operations & Maintenance Technician

Operations & Maintenance Technician

Millwright

Wastewater Plant Operator

Wastewater Treatment Plant Operator

Paint Plant Operative

Randstad

Location:United Kingdom , Desford

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:May 11, 2026

Expiration:July 13, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Paint Plant Operative

Plant Operator I

Paint Shop Process Engineer

Operations & Maintenance Technician II

Operations & Maintenance Technician

Operations & Maintenance Technician

Millwright

Wastewater Plant Operator

Wastewater Treatment Plant Operator

Location:
United Kingdom , Desford

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
May 11, 2026

Expiration:
July 13, 2026