Operations & Maintenance Technician II Job at Crusoe (Abilene)

Operations & Maintenance Technician II

Crusoe is seeking a skilled Operations & Maintenance Technician II (OMT II) to e...

Location

United States , Abilene

Salary:

41.00 - 47.00 USD / Hour

Crusoe

Expiration Date

Until further notice

Requirements

High School diploma or equivalent is required
Ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs
Comprehensive knowledge of mechanical, instrumentation, and electrical equipment, including proficiency in repairing, replacing, and dismantling defective parts
Adept at diagnosing problems with mechanical equipment and performing water chemistry analysis
Strong verbal and written communication skills with the ability to train other personnel and write operating procedures
Capable of operating welding and cutting equipment, as well as tools such as drill presses, pipe threading machines, and grinders
Ability to perform walking, reaching, climbing, and lifting up to 50 pounds
Willingness to work a 12-hour rotating shift and be available for call-ins and work overload as needed
Must be authorized to work in the USA
This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required.

Job Responsibility

Plant Operations & Maintenance: Operate and maintain simple cycle power generating facility equipment, including heat recovery steam generators, air compressors, and fire suppression systems, with minimal guidance or assistance
Technical Troubleshooting & Repair: Adeptly troubleshoot, diagnose, and repair defective plant equipment such as pumps, valves, fans, gearboxes, and turbine components in a timely fashion
System Inspections & Data Recording: Perform an "Inspection of Watch" on each plant system and record data from meters and gauges—including temperature, vibration, fluid levels, and water chemistry—to verify operating conditions
Water Chemistry Management: Perform analysis on HRSG, auxiliary boiler, and cooling tower systems, making necessary adjustments to chemical feed and blowdown rates to ensure chemistry remains within proper control ranges
Electrical & Mechanical Tasks: Responsible for opening and closing circuit breakers for system operation or electrical isolation, and performing piping and conduit installation for plant upgrades
Operational Documentation: Utilize the facility’s computerized maintenance management system (CMMS), assist with the development of O&M procedures, and write routine reports or work requests
Safety & Regulatory Adherence: Strictly adhere to all safety and environmental rules, facility safety programs, and plant environmental permits to protect personnel and public safety
Cross-Functional Collaboration: Coordinate with vendors for chemical ordering and timely equipment repairs, and assist in performing Root Cause Analysis (RCA) of failures
Continuous Improvement: Perform general housekeeping and painting projects to maintain the cleanliness and appearance of all plant areas and the control room.

What we offer

Restricted Stock Units in a fast growing, well-funded technology company
Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
Employer contributions to HSA accounts
Paid Parental Leave
Paid life insurance, short-term and long-term disability
Teladoc
401(k) with a 100% match up to 4% of salary
Generous paid time off and holiday schedule
Cell phone reimbursement
Tuition reimbursement

Fulltime

Electronics Technician II (Radar Technician II)

The Electronics Maintenance Technician II (Tech II) supports maintenance, repair...

Location

United States , Fairbanks

Salary:

41.57 USD / Hour

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
technical training in electronics required
2-4 years of experience in electronics maintenance, repair, or operations
Familiarity with Radar and High-Power transmitters or similar systems preferred
Ability to interpret manufacturers' manuals, schematics, and technical documentation to solve routine problems
Proficiency with electronic test equipment, including spectrum analyzers, multi-meters, oscilloscopes, and signal generators
Strong understanding of AC/DC circuit interrelationships and judgment in planning work sequences
Ability to follow Air Force TOs and OEM standards
Strong communication and teamwork skills
Eligible for DoD security clearance. (Must be US Citizen)

Job Responsibility

Perform maintenance activities including periodic, scheduled, unscheduled, and preventative maintenance following TOs and OEM documentation
Troubleshoot and resolve routine electronic issues using manufacturers' manuals and advanced technical knowledge
Replace components, wire circuits, and repair more complex electronic systems with limited supervision
Operate and prepare threat systems, including radars and supporting equipment, for training events, ensuring threat-faithful operations during JPARC missions
Use testing instruments such as spectrum analyzers, digital multi-meters, oscilloscopes, and signal generators to diagnose and verify system functionality
Plan work sequences, select appropriate tools, and ensure maintenance tasks are compliant with accepted practices
Maintain job completion logs and system reports
Track, manage, and maintain sufficient spares inventory to ensure operational readiness
Interface with Air Force depot systems to report on supported threat systems and ensure accurate status updates
Submit reports including Proposed Spare Parts Lists and Inventory/Utilization Data

What we offer

$6000 Annual Cold Weather Bonus

Fulltime

Maintenance Technician II - Food Production

We are hiring immediately and offering a Sign-on bonus of $1,000.00. JOB SUMMARY...

Location

United States , Hampshire

Salary:

22.79 - 34.13 USD / Hour

Sysco

Expiration Date

Until further notice

Requirements

Three (3) plus years of maintenance experience in a manufacturing setting
Experience troubleshooting mechanical systems, electrical components, hydraulics, pneumatics, pumps, material handling equipment, etc.
High School Diploma or GED
Must provide own tools (diagnostic equipment and major tools provided by Sysco)
Moderate knowledge of OSHA safety regulations
Moderate knowledge of environmental regulations
Basic computer skills and knowledge
Moderate knowledge and skill in Preventive Maintenance Inspections and repair
Moderate knowledge and skill in diagnosis and repair of mechanical, electrical, pneumatic and hydraulic systems
Moderate knowledge and skill with a multi-meter and infrared thermometer

Job Responsibility

Troubleshooting equipment issues and performing preventive maintenance on production equipment throughout the facility with limited supervision
Participate in 5S and Lean manufacturing activities including material handling improvements, production line configuration, and safety procedures
Learn industry leading maintenance practices and methodologies to increase equipment safety, uptime, and performance
Supports company and industry standard safety policies and procedures - OSHA, NEC, NFPA, USDA, FDA, etc.
Perform inspections and complete preventive/predictive maintenance tasks on production and process utility equipment to increase quality, safety, and overall equipment reliability
Diagnose and repair production and process utility equipment deficiencies and failures
to include, but not limited to mechanical, electrical, pneumatic, and hydraulic equipment
May include facility repairs as needed
Learn and use continuous improvements tools and methods to improve equipment reliability, may include root cause analysis (RCA), failure mode analysis (FMA) and make recommendations to prevent recurrence
Work and train with OEM technicians during production equipment rebuilds, line moves, installations, setups, calibrations, and emergency repairs

What we offer

Sign-on bonus of $1,000.00

Fulltime

General Maintenance Technician II

Amentum is seeking a General Maintenance Technician II to join our operations & ...

Location

United States , Lancaster

Salary:

27.00 - 29.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or demonstrated equivalent
3 years of experience as an HVAC/R Maintenance Technician or a Facility Maintenance Technician in a data center, industrial environment, hospital, laboratory, manufacturing facility or demonstrated equivalent combination of education and experience
Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
Qualified applicants who are offered a position must pass a pre-employment substance abuse test
This position may require a valid Driver's License
This position will require the ability to obtain a security access badge at our client’s location

Job Responsibility

Performs planned maintenance on all building equipment and related services for specific area while being sensitive and responsive to customer needs
Operating and maintaining HVAC equipment and systems for the facility
Demonstrates proficiency with pneumatic, electric, and electronic control systems
Diagnoses, troubleshoots, maintains, and repairs heating and ventilation equipment, pumps, fans, air dryers, compressors, and other mechanical equipment as necessary
Performs preventative maintenance inspections
Develops and implements planned maintenance procedures, performs job estimates, maintains spare parts inventory
Assists in installing, inspecting new equipment and servicing installations
Provides support to co-workers, contractors, vendors, project managers, building managers, and engineers as necessary to support project and renovation work
Complies with all governmental, company, and industrial regulations, codes, and standards, health safety practices, and permit systems
Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS)

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Maintenance Technician II General Admin

Under some direct supervision the Maintenance Technician II is an intermediate l...

Location

United States , Marietta

Salary:

Not provided

Builders FirstSource

Expiration Date

Until further notice

Requirements

High school diploma or general education degree (GED)
Certificate from a vocational school in maintenance technology preferred
2 - 5 years of related experience
Or equivalent combination of education and experience
Valid driver’s license

Job Responsibility

Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines
Locates sources of problems by observing mechanical and electrical devices in operation
Removes defective parts by dismantling devices
Determines changes in dimensional requirements of parts by inspecting used parts
Adjusts functional parts of devices and control instruments by using hand tools
Controls downtime by informing production workers of routine preventive maintenance techniques
Fabricates repair parts by using machine shop instrumentation and equipment
Maintains equipment, parts, and supplies inventories
Conserves maintenance resources by using equipment and supplies as needed
Provides mechanical maintenance information by answering questions and requests

Fulltime

General Maintenance Technician II

Amentum is seeking a General Maintenance Technician II to join our operations & ...

Location

United States , East Peoria

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or demonstrated equivalent
Three years of maintenance experience in one of the following trades or demonstrated equivalent combination of education and experience: Industrial HVAC/ Industrial Mechanical Machine Repair, or Automotive Repair

Job Responsibility

Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
Operates, maintains, and repairs all facility and production associated equipment in compliance with all company regulations and standards
Analyzes equipment failures, inspects, replaces, alters, and maintains in good repair all building and production services and related equipment
Performs planned maintenance on all building equipment and related services for specific area while being sensitive and responsive to customer needs
Performs trouble-shooting techniques on mechanical equipment such as HVAC, pumps, agitators, hydraulic systems, RO/DI purified water systems, compressed air and other gas equipment and distribution systems to determine problems and effect repairs as promptly and efficiently as possible to minimize downtime
Performs preventative maintenance inspections
Develops and implements planned maintenance procedures, performs job estimates, maintains spare parts inventory
Assists in installing, inspecting new equipment and servicing installations
Provides support to co-workers, contractors, vendors, project managers, building managers, and engineers as necessary to support project and renovation work
Complies with all governmental, company, and industrial regulations, codes, and standards, health safety practices, and permit systems

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Aircraft Maintenance Technician II - C130

Definition: This is the journey and second working level for certificated Airfra...

Location

United States , McClellan

Salary:

59.03 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

FAA Airframe & Powerplant Technician’s Certificates
valid Class-C Driver’s License
three years of aerospace industry work experience as a certificated A&P Technician
two years’ experience working on type specific aircraft
Military experience may qualify if the level of work and responsibility was equal to that of a certificated A&P Technician
Prior OEM or other outside training and experience on C-130 variant aircraft may satisfy the one-year of CAL FIRE specific aircraft requirement
Current CAL FIRE Aviation Program Aircraft Maintenance Technician II who obtain one year of experience and current CAL FIRE Aviation Program Aircraft Maintenance Technician I who obtain two years of experience working on C-130 aircraft and successfully complete Original Equipment Manufacturer or other certified outside vendor for line and intermediate level training specific to the aircraft may be eligible for promotion to this position

Job Responsibility

Inspect and repair aircraft, engines, components and systems and assess for damage, condition and method of repair, and work off site at outlying field locations, which may include assignment as a base mechanic
May perform Confined Space Entry maintenance to include aircraft fuel tank repairs
May be required to become engine/taxi-run qualified and demonstrate proficiency in their respective program(s) aircraft ground operations
Work independently in a central aviation maintenance facility or work unsupervised off site at outlying field locations
Perform depot level and field maintenance to aircraft, engines, propellers, rotors, components and systems in accordance with approved procedures
Have a thorough working knowledge of all fleet aircraft, engines, and airframe systems
Ability to inspect and determine problems and correct deficiencies, inspect aircraft and systems for continued airworthiness, and return aircraft to service after major and minor maintenance and repair

What we offer

Competitive benefits package

Fulltime

HVAC Maintenance Technician II -2nd shift

While working under the supervision of the Maintenance Manager, the General Main...

Location

United States , Evanston

Salary:

25.00 - 27.00 USD / Hour

Aramark UK

Expiration Date

Until further notice

Requirements

At least 3 years of experience in building maintenance trades
Possess and maintain a valid driver's license
Able and willing to work in inclement weather
Solid understanding of plumbing and electrical systems and general carpentry
Full range of mobility outdoors, indoors, and in confining areas, using stairs, ramps, or ladders
Must adhere to all applicable safety and local regulations, standards, and procedures
Must be able to lift or move heavy objects up to 80 lb. and must be able to stand and work for 12 hours in different positions
Must have great customer service skills when interacting with customers, co-workers, visitors, etc.
Attention to detail is required

Job Responsibility

Inspects assigned buildings on a routine basis and performs maintenance where necessary while keeping facilities in serviceable condition
Reports major maintenance needs to supervisor for referral to shop-crafts or other corrective actions as necessary
Performs stand-by duty call on a regular call basis and responds to after-hours and weekend emergency call-backs
Repairs various fixtures, hardware, and facilities as required such as door locks and hardware, broken windowpanes, minor plumbing, minor electrical circuits and appliances, office equipment or furniture, faucets and valves, shower grouting, floor and ceiling tiles, and other necessary maintenance duties
May need to safely operate a service truck in locations that require travel
Must attend safety meetings as required

What we offer

medical
dental
vision
work/life resources
retirement savings plans like 401(k)
paid days off such as parental leave and disability coverage

Fulltime

Select Country

Operations & Maintenance Technician II

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?

Operations & Maintenance Technician II

Operations & Maintenance Technician II

Electronics Technician II (Radar Technician II)

Maintenance Technician II - Food Production

General Maintenance Technician II

Maintenance Technician II General Admin

General Maintenance Technician II

Aircraft Maintenance Technician II - C130

HVAC Maintenance Technician II -2nd shift

Our AI answers in your language