Offshore Safety Specialist Job at Airswift Sweden (Houston)

Senior Structural & Mechanical Integrity Engineer

Senior Structural & Mechanical Integrity Engineer within the Asset Integrity Man...

Location

Salary:

Not provided

James Fisher

Expiration Date

March 20, 2026

Requirements

Degree qualified in Structural or Mechanical Engineering
Chartered Engineer (CEng) or working towards is preferred
Lifting knowledge aligned to LEEA guidance
relevant NDT qualifications desirable
Extensive experience with offshore platforms, offshore wind substations, or marine structures
Strong understanding of corrosion protection, structural assessment and mechanical systems – including pressurised systems, HVAC, lifting equipment, and rotating machinery
Familiarity with FEA and structural modelling tools (e.g., ANSYS, ABAQUS, SESAM) is desirable
Experienced in interpreting ROV data, bathymetric surveys, and subsea structural interface inspection datasets
Familiarity with offshore standards, integrity management frameworks, and risk-based methodologies
GWO certifications and Offshore Medical (or willingness to obtain) for offshore access (if desired)

Job Responsibility

Act as the technical authority for the structural and mechanical integrity of offshore transmission and renewable energy assets
Provide lifecycle engineering assurance across offshore substations, foundations, primary and secondary steelwork, mechanical systems, corrosion protection, lifting equipment, and subsea interfaces
Define integrity strategies, assure inspection and assessment activities, evaluate degradation and fatigue mechanisms, and lead risk-based decisions that protect safety, availability, and OFTO revenue
Assess the condition of offshore structures including primary and secondary steel, decks, gratings, handrails, ladders, W2W structures, and access systems
Review foundations, jackets, and monopiles using inspection data, ROV footage, bathymetry, scour surveys, and structural assessments
Assess J-tubes, bell mouths, clamps, bend restrictors, and cable interface structures
Review cable protection systems (CPS) and identify exposure, damage mechanisms, and structural vulnerabilities
Provide integrity oversight for HVAC systems, cranes, davits, mechanical handling systems, fire systems, and auxiliary plant
Review mechanical degradation, corrosion mechanisms, coating failures, and fatigue-related defects
define remediation

What we offer

Competitive benefits tailored to the division
Opportunities for career growth and visibility across the organisation
A supportive, inclusive culture that values your ideas and contributions
Work that truly makes a difference in safety, innovation, and global capability

Fulltime

!

Master Mariner – Marine Operations Specialist

We are seeking an experienced Master Mariner to support planning, execution and ...

Location

Norway , Stavanger

Salary:

Not provided

Sigma Group

Expiration Date

Until further notice

Requirements

Master Mariner Certificate (STCW)
Solid offshore experience within: Offshore Oil & Gas
Supply, AHTS and IMR operations
DPO / DP operations
Rig Move and Marine Assurance
Strong safety mindset
Good communication skills in English

Job Responsibility

Plan and oversee offshore marine operations, including rig moves
Act as marine advisor for vessel operations (Supply, AHTS and IMR)
Provide oversight of Dynamic Positioning (DP) operations
Support marine assurance activities, procedures and risk assessments
Ensure compliance with maritime regulations and HSE requirements
Contribute to continuous improvement and safe operations

What we offer

Challenging marine projects in a professional environment
Competitive terms and development opportunities

Fulltime

Hse specialist

Health, Safety and Environmental (HSE) Specialist is expected to demonstrate cap...

Location

United Kingdom , Aberdeen

Salary:

Not provided

Cactus Wellhead LLC

Expiration Date

Until further notice

Requirements

Bachelor’s Degree from an accredited university or college (i.e. engineering science, environmental science, industrial hygiene, occupational safety, and health sciences)
Minimum of 4 years of HSE experience (preferred in Oil & Gas industry)
Strong understanding of UK and European regulatory requirements
NEBOSH certification, diploma or equivalent
ISO45001 / 14001 lead auditor
Basic Offshore Safety Induction Emergency Training
Strong oral and written communication skills
Strong interpersonal and leadership skills
Strong kills in data analytics
Ability to work independently

Job Responsibility

Lead Health, Safety and Environmental (HSE) programs, initiatives and operationalization of HSE procedures and policies into the business
Develop site specific HSE procedure as required
Oversee specific aspects of health, safety and environmental programs to maintain full compliance with applicable laws and regulations as well as internal and external business requirements
Drive HSE Culture evolution through regular interpersonal mentorship, communications and interactions
Deep dive key HSE performance indicators (both lagging and leading), provide routine updates to leadership team and initiate continuous improvement programs
Perform self-assessments, audits and regular inspections to assure conformance with HSE management system, regulatory and customers’ requirements
Serve as a Subject Matter Expert for high risk operations, new projects’ start-ups, HSE tender submissions, all related HSE due diligence and management of change
Facilitate incident investigations, root cause analysis, corrective, preventive actions and HSE learning events
Manage compliance tracking programs, HSE digital tools and record keeping systems
Ensure effective HSE training programs are in place and properly executed including Onboarding and Short Service programs

Fulltime

Senior Subsea Pipeline Marine Inspector

Airswift are a Global Manpower Provider specializing in the Energy, Infrastructu...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering discipline (Mechanical) with demonstrated knowledge and experience
CSWIP 3.4UC Underwater Inspection Controller (Ref. CSWIP Document No.CSWIP-DIV-7-95 – Part 2)
Current / valid BOSIET, TBOSIET, FOET or TFOET certificate (Ref. OPITO requirements), as applicable, in conjunction with an offshore medical certificate
Experience in conducting QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation (specifically, the Repair / Installation of pipelines and their associated infrastructure) would be preferable
At least six (6) years of working experience in Quality Assurance and Control (QA/QC) within the Oil and Gas industry (i.e., onshore and offshore)
Should have a proven history as a lead 3.4UC underwater inspection controller within demanding subsea/offshore projects
Subsea pipeline project experience is highly desired, with emphasis on pipeline operations, integrity assurance/non-destructive testing (NDT) and inspection, maintenance and/or design and construction
Familiarity with marine vessel operations and the organisational responsibility of the (i) Offshore Construction/Installation Manger, (ii) Vessel Master, (iii) Diving and ROV Supervisors, (iv) Client Representative(s), (v) Certifying Authorities, etc.
Knowledge and working experience of underwater inspection (UWI) in the form of visual inspection and non-destructive testing (NDT) conducted by means of the intervention of diver(s) and/or remotely operated vehicle (ROV) or crewed submersible (i.e., either as a practitioner and/or as the result of training or certification conforming to the requirements of CSWIP Document No. CSWIP-DIV-7-95 – Part 1 and 2)
With respect to UWI and other related activities, shall be familiar with (i) relevant subsea applied inspection systems, (ii) recording and processing of data, (iii) quality assurance (QA), (iv) inspection planning and briefing, (v) the capabilities and limitations of divers/ROV’s and submersibles, and (vi) the care and deployment of equipment

Job Responsibility

Ensure compliance with QatarEnergy LNG systems and processes, including the Project Management System. Engage contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship
Have a knowledge of the front end engineering design (FEED) deliverables and engineering study reports to support the implementation of the Project Quality Plan (PQP) and associated Procedures
Review the project Scope of work, to determine the nature, extent, and frequency of quality verification activities
Monitor, evaluate and report the inspection and testing status of the pipeline repair activities
Maintain interface relationships with Subsea Pipeline Repair Installation, and Inspection Contractors (including nominated specialist third-party Contractor organisation(s)), and the applicable regulatory focal points
especially, those functioning offshore
Review Contractor’s and Vendor’s quality reports / deliverables, in line with the project quality requirements
In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i.e. procedures, specifications, detailed methodologies, etc)
Support the underwater inspection (UWI) activities during the offshore / subsea repairs, by means of the development of job records, preparation of daily reports, review of diver commentary and transfer into the written form, interpretate ROV camera footage and transfer into the written form and be able to produce an oral commentary of the daily activities, as and when required
Monitor the technical inspections, verification, certification and acceptance by Specialist Third Party Inspection (TPI) Contractor, as applicable, and develop the final documentation for each offshore campaign (i.e., PL-49, PL-75, PL-610 and PL-811)

Fulltime

Civil & Structural Apprentice

Are you a motivated, technically minded individual with a passion for shaping th...

Location

United Kingdom , Warrington

Salary:

Not provided

Risktec Solutions

Expiration Date

Until further notice

Requirements

A minimum of three A-Levels at Grades A*-C (or equivalent Level 3 qualification, such as a BTEC Extended Diploma)
Your Level 3 subjects must include Mathematics and a Physical Science (e.g., Physics, Chemistry, or equivalent engineering-related subject)
Excellent problem-solving skills
Strong communication (written and verbal)
A keen eye for detail
A strong aptitude for analytical thinking
Meticulous observation
A commitment to safety and quality assurance

Job Responsibility

Assist in the production of Civil and Structural Engineering designs, ensuring compliance with current codes, standards, and best practices
Work with project teams on a diverse range of schemes, including industrial, commercial, residential, and infrastructure projects
Conduct site visits to perform visual inspections of existing buildings, steel and concrete structures, secondary containments, fireproofing, pipe bridges, underground services & pits, offshore & marine structures, bridges, and other specialist structures
Learn to identify defects, assess structural integrity, and ensure compliance with relevant codes and specifications
Participate in site surveys and monitoring activities, such as NDT, level surveys etc
Prepare and manage technical documentation, drawings, and reports using industry-standard software
Manage quality processes and contribute to continuous quality improvements within the team
Assist in the planning and management of resources, equipment, and technology to meet project deadlines
Actively engage with your formal apprenticeship training provider, applying academic knowledge to real-world engineering challenges

Fulltime

Project Electrical Technician

Project Electrical Technician for Offshore Services Projects. Mammoet Offshore S...

Location

United Kingdom , Thornaby

Salary:

34638.00 - 80000.00 GBP / Year

Mammoet

Expiration Date

Until further notice

Requirements

Electrical City & Guilds, ONC, NVQ Level 3 or similar qualification
Working with low voltage and ELV systems and experience with their applications
Ability to wire and test electrical systems, read and understand electrical schematics, troubleshooting and fault finding
Willing and capable to learn operation and maintenance Mammoet's specialist equipment
Willing to travel and work within and outside of the UK for extensive periods including some offshore working
Current valid driving licence
Current valid passport (no restrictions)

Job Responsibility

Unpacking, setup, installation, operation and maintenance of Mammoet Offshore Services equipment including but not limited to strand jacks, diesel driven hydraulic power units, ballast pumps, winches, hydraulic jacks and weighing equipment on project sites
Wiring and testing of electrical systems (both new installations and refurbishment)
Repair and fault finding of electrical systems
Rigging and general lifting of equipment
Support packing and unpacking of containers in accordance with detailed packing lists
Complete post operation equipment maintenance checks
Maintenance, preparation and packing of equipment in the Middlesbrough yard in readiness for mobilisation to a project
Travel to a wide range of project sites worldwide both onshore and offshore
Reports directly to the Foreman and Supervisor on site and the personnel planner in the office
Reading, understanding and working to site and project specific method statements, risk assessments, ITP's and engineering drawings

What we offer

25 days holiday per year, plus bank holidays
Buy and sell holiday scheme
All PPE and workwear provided
Enhanced maternity and paternity leave
Employee wellbeing programme with EAP and counselling available
Life assurance
Company pension
Access to high street savings and discounts plus more on our online platform

Fulltime

Chief Engineer

The Company currently have vacancies for a Chief Engineer in our SOV fleet. Star...

Location

United Kingdom

Salary:

Not provided

North Star Shipping

Expiration Date

Until further notice

Requirements

Worked in a Chief Engineer capacity previously
Hold a UK CoC / UK FSE
Non-UK candidates willing to apply for UK equivalent certificate of competency considered

Job Responsibility

Responsible for the technical status of the ship, its machinery and propulsion systems
Ensure all equipment onboard is operational
Ensure vessel complies with relevant rules and regulations
Carry out safe, efficient and economic operation and maintenance of all machinery, systems and specialist equipment
Ensure effective and efficient watch is maintained in the engine room
Report defects via company approved planned maintenance system
Update status and content of defects
Requisition stores, spares and equipment for the Engine Department
Delegate tasks to Engine Room staff
Actively promote and progress company Quality, Health, Safety and Environmental Policy

What we offer

Competitive salary
28 days on/off rotation
Contributory pension scheme
Access to Employee Assistance Programme

Fulltime

Site Lifting Specialist

Location

Qatar , Doha

Salary:

Not provided

Lobellia

Expiration Date

Until further notice

Requirements

Minimum 10 years in the lifting & handling industry at supervisory level
Offshore jacket / topside installation experience preferred
Technical Engineer and / or Industry related qualifications such as OPITO! LEER! EAL CPA etc.
Broad and extensive knowledge in handling & lifting appliance & operations
Working to International standards such as: BS. LOLER. etc.!
Experienced in Oil & Gas Industry
Worked in onshore & offshore operations
Have working profile such as: Rigger, Rigger Foreman, Rigging Supervisor, Lifting Supervisor, Lifting Superintendent SLS
Risk assessment in relation to health. safety & environment
Supervision of critical and heavy lifts

Job Responsibility

Provide technical expertise in daily handling & lifting activities including Categorization of lifts
Risk assessment and hazard identification in line with criticality of the lifting operation
Selection of equipment for lifting operations
Attendance at lifting toolbox talks when on site
Post-job debriefs
Assessment of completed jobs
Promote safe handling and safe lifting operations in line with COMPANY HSE policies and international recognized standards. review engineering calculations and provide technical feedback for complicated and complex critical lifting activities.
Review complicated and complex lift plans and attend the critical lifting activities on behalf of company CPLO and management to ensure safe execution
Perform condition & compliance checks and fitness for purpose reviews on lifting appliances. lifting accessories. CCUs. and evaluate their acceptance based on utilization on site.
To be Involved with planed internal audits of the lifting operations. participate in lifting operations incident investigation and analyses when required FMA

Fulltime

Offshore Safety Specialist

Airswift Sweden

Location:
United States , Houston

Category:
Energy

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
December 16, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Offshore Safety Specialist

Senior Structural & Mechanical Integrity Engineer