CrawlJobs Logo
CMR - CONTROLE MESURE REGULATION Logo CMR - CONTROLE MESURE REGULATION · Manufacturing

Npi engineer

Tunisia · Job Posted April 10, 2026
Apply Position
Job Link Share

Job Description

The main mission will be to supervise and facilitate the development process of new products.

Job Responsibility

  • Bill of Materials Creation: Develop the bill of materials for new products in the ERP and ensure their regular updates
  • CPN Code Management: Create and manage new CPN codes for components in the ERP
  • Product Costing: Estimate the cost of new products, taking into account raw materials and labor
  • Product Range Updates: Maintain and update the bill of materials and product manufacturing ranges in the ERP
  • Project Management: Develop schedules for new projects and monitor progress to ensure prototypes are delivered on time, with zero defects
  • Support and Training: Assist in the validation of first production runs, train operators on new products, and validate production times through time studies
  • Technical Document Preparation: Prepare manufacturing documents for new products (cutting plans, twisting plans, tooling files, etc.)
  • Process Documentation: Write manufacturing process instructions for new products and ensure their compliance
  • Schedule Management: Develop and follow the weekly schedule for new product deliveries
  • Equipment Identification: Identify the manufacturing and testing equipment needed for new products (tools, means, interfaces, etc.)
  • Participation in Meetings: Contribute to analysis meetings to improve project quality
  • Team Collaboration: Provide technical feedback to designers and project managers to ensure smooth project execution
  • Health and Safety: Apply health and safety policies in accordance with the company’s manual requirements

Requirements

  • Management of projects involving the introduction of new products into production
  • Knowledge of industrialisation processes and process optimisation
  • Proficiency in quality tools: APQP, PPAP, FMEA, 8D
  • Ability to read technical drawings and manufacturing documentation
  • Knowledge of Lean Manufacturing and continuous improvement tools
  • Proficiency in Excel and project management tools

Nice to have

  • Industrial Engineering (and/or Mechanical Engineering
  • Mechatronics, etc.)
  • 2 to 3 years, ideally in an industrial environment. (Automotive wiring a plus)
  • Attention to detail and ability to analyse data

What we offer

  • A salary according to your profile
  • A dynamic organization where personal contribution and development are central
  • The management of your own success and the necessary support for your development
CMR - CONTROLE MESURE REGULATION - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Npi engineer

8 matching positions

Engineer I, NPI (Test Engineer)

The NPI Engineer I is an entry-level engineering role responsible for supporting...
Location
Location
United States , Shakopee
Salary
Salary:
Not provided
commscope.com Logo
CommScope
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelors in related curriculum such as Engineering
  • Basic understanding of manufacturing processes and New Product Introduction workflows
  • Experience with precision measurement equipment and test methods
  • Basic troubleshooting skills for hardware, software, and process-related issues
  • Basic knowledge of manufacturing processes and test integration
  • Basic troubleshooting of test software and application logic
  • Strong written and verbal communication skills to explain technical concepts clearly
  • Ability to work collaboratively with global, cross-functional teams
  • Willingness to learn and develop deeper expertise in optical test technologies
  • Familiarity with Excel, including data analysis
Job Responsibility
Job Responsibility
  • Support development and implementation of optical test processes for new products during NPI phases
  • Assist with precision fiber optical connector geometry testing to verify alignment, positional accuracy, and mechanical-to-optical interfaces
  • Support optical polarity testing to ensure correct fiber routing, orientation, and signal integrity
  • Execute optical performance tests under supervision, documenting results and identifying anomalies
  • Execute machine and test software validation activities, including test correlation, GR&R, and repeatability studies
  • Assist in defining test requirements and acceptance criteria based on product specifications
  • Support debugging optical test equipment, fixtures, software, and interfaces during prototype, pilot, and ramp phases
  • Work closely with Test Development and Software teams to resolve issues related to hardware, firmware, or application logic
  • Provide on-site and remote support to global production sites focused on optical test operations
  • Assist with test station deployment and transition from development to production
  • Fulltime
Read More
Arrow Right

Senior NPI Engineer

The NPI Engineer is responsible for shepherding hardware from concept review to ...
Location
Location
United States , Bozeman
Salary
Salary:
115000.00 - 184000.00 USD / Year
aurora.tech Logo
Aurora Innovation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of 8 years experience in engineering role with experience working in low to high volume production environments.
  • Experience with launching hardware products and the product life cycle, and selecting the right-sized process based on the needs of the program.
  • Experience in relevant fields – optical alignment process development, optical interconnect, chip-to-chip coupling, and FAU alignment
  • Participate in the process of bringing up a new technology from the R&D stage to high volume manufacturing.
  • Proficient in SPC, 6 sigma, quality control process
  • good understanding of machine and process interactions.
  • We are seeking applicants who demonstrate the ability to work independently, deliver results promptly, communicate effectively, operate with a sense of urgency, and thrive in a fast-paced development and production environment.
  • Experience with working with supply chain and vendors, bonus points for experience in design engineering and new product introduction.
  • Working knowledge of GD&T.
  • Experience with 3D CAD and PDM/PLM, preferably Catia/Solidworks and Enovia/EPDM.
Job Responsibility
Job Responsibility
  • Support transition of critical automated mirco-optical alignment from engineering to high volume manufacturing at CM.
  • Ensure end-to-end assembly process readiness for complex lidar systems at manufacturing partners.
  • Yield analysis monitoring and drive continuous improvement initiatives for NPI production lines, ensure optimal yield and efficiency to achieve capacity and cost target.
  • Maintain products’ quality by improving design and manufacturing process as well as equipment stability.
  • Provide onsite engineering support: technical ownership and support for process or equipment issues.
  • Provide feedback on manufacturing and service requirements, process control plans, and quality assurance. Develop hardware standards and design guidelines.
  • Own control plans, manufacturing BOM, and necessary documentation to transfer HW from design to the production floor, whether internal or external.
  • Review data packages before they are released for manufacturing.
  • Create and maintain work instructions, standard operating procedures, forms, records, checklists, process sequence/routing, Process Flow Diagrams (PFD), PFMEAs, and other required manufacturing documentation
  • Support and guide the manufacturing team through all phases of Advanced Product Quality Planning (APQP)
What we offer
What we offer
  • Annual bonus
  • Equity compensation
  • Fulltime
Read More
Arrow Right

Senior Staff Engineer, NPI

Senior Engineer, Global NPI, provides technical leadership and execution oversig...
Location
Location
United States , Shakopee
Salary
Salary:
Not provided
commscope.com Logo
CommScope
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's Degree in related curriculum such as Engineering with 8-10 years of work experience in relevant or related field
  • Proficient in FBC, SAP, Lean Six Sigma, SharePoint
Job Responsibility
Job Responsibility
  • Lead all phases of New Product Introduction (NPI), from concept through production launch
  • Define manufacturing strategies to ensure scalability, yield, and cost targets are achieved
  • Ensure alignment between product design and manufacturing through advanced DFM guidance
  • Drives technical leadership in optical test, interferometry, and continuity verification
  • develops and implements advanced processes leveraging emerging technologies and external partners, ensuring scalable deployment across sites without compromising quality or customer performance
  • Leads functional business analysis for Fiber Barcode (FBC) systems
  • defines software requirements and strategy to ensure product compliance, drives development activities, and validates system performance for robustness and reliability
  • Provides direction across all NPI phases, ensuring execution aligns with PDP requirements, procedures, and regulatory standards
  • coordinates with R&D and PLM on schedules, resources, and capital planning while driving process capability, yield, and cost performance through PFMEA, VSM, and throughput analysis
  • Specifies and leads implementation of automation equipment for fiber manufacturing systems, including concept, design, build coordination (internal and external), validation, and operator readiness
  • Fulltime
Read More
Arrow Right

Thermal/Mechanical Engineer, NPI Technical Readiness

Meta is seeking a Staff Thermal Engineer to lead thermal architecture and new pr...
Location
Location
United States , Fremont
Salary
Salary:
173000.00 USD / Year
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Science degree in engineering, in thermal, mechanical, or equivalent technical experience is required
  • Minimum of 8 years of experience in development engineering, system validation testing or data center operation of AI/ML computer, networking equipment, and/or hyperscaler data center environments is mandatory
  • Possession of robust communication skills and a demonstrated capacity to influence cross-functional teams is essential
  • Domain knowledge in thermal engineering and/or mechanical engineering with hands-on experience with the designing, modeling, and validation of rack-level or data center cooling solutions
  • A proven history of navigating ambiguity and establishing processes for novel technologies, and successfully transitioning them into production, is required
  • Technical aptitude, evidenced by familiarity with ASIC, compute, storage, and network architecture and components, hardware troubleshooting and diagnosis capabilities, and/or hardware manufacturing processes
  • Experience operating within a global environment, including collaboration with remote teams, is required
  • Demonstrated experience with operational validation methodologies and verification activities pertinent to new product integration is expected
  • The ability to cultivate strong cross-functional relationships and influence policies and procedures to enhance the integration of hardware platforms into the data center
  • The capacity to mentor team members in evaluating and identifying superior methods for issue resolution and defining updates to tools and processes is expected
Job Responsibility
Job Responsibility
  • Conduct architecture reviews with hardware engineering teams to analyze and develop the most efficient interface and deployment strategy for mass production within the data center environment
  • Direct product reviews and deliver the technical readiness assessment for deployment alignment, with a specific focus on thermal, mechanical, spatial, and hardware compatibility
  • Perform airflow and liquid flow demand vs. capacity analysis, identifying the design margin and provide guidance on system control for efficient and reliable operation
  • Collaborate with cross-functional teams to define the requirements and deliver the necessary NUDD equipment to support the deployment
  • Partner with cross-functional teams and development partners to deliver harmonized new hardware platform roadmaps and secure an agreement on implementation milestones
  • Liaise with cross-functional partners in Meta’s Data Center Operations team to ascertain infrastructure deployment and operational requirements
  • Work with ODM/OEM vendors as necessary to define product specifications, development plans, and the integration strategy within the data center
  • Capture lessons learned from production issues and create corresponding test cases to address these issues in subsequent hardware platforms
  • Domestic and/or international travel, up to 25%, is required
What we offer
What we offer
  • bonus
  • equity
  • benefits
  • Fulltime
Read More
Arrow Right

Senior Project Engineer - NPI

We are currently seeking an experienced Senior Project Engineer – Non-Process In...
Location
Location
Australia , Perth
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in Engineering (or equivalent)
  • 8+ years’ experience in mining, infrastructure, or heavy industry projects
  • Strong experience delivering Non-Process Infrastructure (NPI) scope
  • Background in: Civils and utilities
  • Camp / village infrastructure
  • Water systems and site services
  • Proven ability managing: Contractors and suppliers
  • Project interfaces across multiple disciplines
  • Full project lifecycle (design to execution)
Job Responsibility
Job Responsibility
  • Lead delivery of NPI and camp infrastructure packages across project lifecycle
  • Develop and manage scopes including: Bulk earthworks, buildings, and camp facilities
  • Utilities (power, water, sewer, communications)
  • Access roads, laydown areas, and supporting infrastructure
  • Coordinate interfaces between contractors, suppliers, and internal teams
  • Manage procurement activities including tenders, evaluations, and contracts
  • Oversee site execution to ensure compliance with drawings, specs, and safety standards
  • Monitor progress, risks, and project milestones
  • Resolve technical queries, design changes, and non-conformances
  • Support design reviews and safety processes (HAZID, HAZOP, constructability)
What we offer
What we offer
  • Opportunity to work on a large-scale, high-value project
  • Long-term contract with potential extensions
  • Perth-based initially with transition to site roster
  • Collaborative and high-performing project environment
  • Fulltime
Read More
Arrow Right

Manufacturing Engineer (NPI)

As a Manufacturing Engineer (NPI) at NTS Hengelo, you are part of the NPI team c...
Location
Location
Netherlands , Hengelo
Salary
Salary:
3500.00 - 5000.00 EUR / Month
nts-group.com Logo
NTS Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • HBO or WO level of education in Mechanical Engineering, Mechatronics, or similar
  • Strong technical insight into manufacturability, tolerances, and metalworking
  • Affinity with or experience in a high-tech production environment, preferably machining
  • Knowledge of quality methodologies such as SPC, CPK, PFMEA, and root cause analyses is a plus
  • Analytical ability to translate design choices into process impact
  • Strong communication skills and ability to effectively switch between engineering and the shop floor
  • Good command of the English language in speech and writing due to drawings, work instructions, and communication on the shop floor.
Job Responsibility
Job Responsibility
  • Translating complex customer specifications into a technically manageable production approach
  • Setting up and optimising production processes within high-tech machining
  • Analysing process data (SPC, CPK, machine performance) and initiating structural improvements
  • Intensively collaborating with operators and production to continuously improve manufacturability and process stability
  • Being the technical point of contact within NPI projects and jointly responsible for predictable and qualitatively stable series production.
What we offer
What we offer
  • Over 40 days off: 27 vacation days and 13 ADV days with a full-time contract
  • Personal development and growth opportunities, for example through training and education
  • Remote work policy: 1 day of telecommuting per week with a net allowance of €2.40 per day
  • Annual discretionary budget of €150, usable for vitality, bike plan, or gym via the Alleo app
  • Travel allowance of €0.21 per kilometer (max. 50 km one way) or full reimbursement of public transport costs
  • Excellent pension scheme via PME
  • Laptop and mobile phone
  • Free fresh fruit at work.
  • Fulltime
Read More
Arrow Right

NPI Engineer – Mechatronics Integration

As an NPI Engineer at NTS Singapore, you are responsible for successfully transi...
Location
Location
Singapore
Salary
Salary:
Not provided
nts-group.com Logo
NTS Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering (Mechanical, Electrical, Mechatronics, or related field)
  • Minimum 2 years of experience in high-precision assembly, manufacturing, or design engineering
  • Hands-on knowledge of manufacturing processes including mechanics, electronics, control systems, pneumatics, and hydraulics (semiconductor industry preferred)
  • Experience with complex mechatronic systems such as linear motors, sensors, servos, actuators, and control systems
  • Strong analytical and problem-solving skills with the ability to perform root cause analysis and advanced troubleshooting
  • Excellent written and verbal communication skills and ability to work in cross-functional, multidisciplinary teams
  • Proficiency in reading and updating technical drawings
  • cleanroom experience is an advantage
Job Responsibility
Job Responsibility
  • Lead New Product Introduction (NPI) projects from design phase through pilot build and mass production
  • Manage project timelines, resources, budgets, and communicate progress to internal stakeholders
  • Review designs for manufacturability and assembly (DFM/DFA), providing feedback to design teams
  • Develop, document, and optimize manufacturing processes, work instructions, and quality procedures
  • Support pilot builds, production ramp-ups, and resolve manufacturing issues through structured problem solving
  • Participate in risk assessments such as FMEA and ensure compliance with quality and regulatory requirements
What we offer
What we offer
  • Competitive salary
  • Annual Wage Supplement
  • Term Life & Medical Insurance coverage
  • Personal growth and development opportunities through training and/or education
  • 18 days of Annual Leave
  • Fulltime
Read More
Arrow Right

New Product Introduction (NPI) Engineer

Syntech Recruitment has partnered with a leading precision machining company tha...
Location
Location
Ireland , Co. Louth
Salary
Salary:
40000.00 - 52000.00 EUR / Year
syntechrecruitment.co.uk Logo
SYNTECH RECRUITMENT LTD
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Level 7 Bachelor’s Degree in Engineering or related field, or equivalent
  • At least 3 years’ experience in a fast-paced manufacturing environment
  • Strong background in working with CNC machines and robotics
Job Responsibility
Job Responsibility
  • Oversee and coordinate the RFQ process, ensuring alignment with project requirements
  • Lead the entire New Product Introduction process, from initial concept through to full production
  • Collaborate with engineering teams to support product design and development phases
  • Identify and implement improvements within the production and NPI processes to enhance efficiency
  • Utilise Epicor ERP software to track project progress and maintain accurate documentation
What we offer
What we offer
  • Life Insurance
  • Pension Scheme
  • Health Insurance Discounts
  • Fulltime
Read More
Arrow Right