CrawlJobs Logo

NPI Engineer – Mechatronics Integration

nts-group.com Logo

NTS Group

Location Icon

Location:
Singapore

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

As an NPI Engineer at NTS Singapore, you are responsible for successfully transitioning new products from design to mass production. You work closely with cross-functional teams to ensure manufacturability, quality, and on-time product launches. In this role, you play a key part in developing robust manufacturing processes and supporting production ramp-ups in a high-precision, cleanroom environment.

Job Responsibility:

  • Lead New Product Introduction (NPI) projects from design phase through pilot build and mass production
  • Manage project timelines, resources, budgets, and communicate progress to internal stakeholders
  • Review designs for manufacturability and assembly (DFM/DFA), providing feedback to design teams
  • Develop, document, and optimize manufacturing processes, work instructions, and quality procedures
  • Support pilot builds, production ramp-ups, and resolve manufacturing issues through structured problem solving
  • Participate in risk assessments such as FMEA and ensure compliance with quality and regulatory requirements

Requirements:

  • Bachelor’s degree in Engineering (Mechanical, Electrical, Mechatronics, or related field)
  • Minimum 2 years of experience in high-precision assembly, manufacturing, or design engineering
  • Hands-on knowledge of manufacturing processes including mechanics, electronics, control systems, pneumatics, and hydraulics (semiconductor industry preferred)
  • Experience with complex mechatronic systems such as linear motors, sensors, servos, actuators, and control systems
  • Strong analytical and problem-solving skills with the ability to perform root cause analysis and advanced troubleshooting
  • Excellent written and verbal communication skills and ability to work in cross-functional, multidisciplinary teams
  • Proficiency in reading and updating technical drawings
  • cleanroom experience is an advantage
What we offer:
  • Competitive salary
  • Annual Wage Supplement
  • Term Life & Medical Insurance coverage
  • Personal growth and development opportunities through training and/or education
  • 18 days of Annual Leave

Additional Information:

Job Posted:
March 12, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
NTS Group - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for NPI Engineer – Mechatronics Integration

Manufacturing Engineer

As a Manufacturing Engineer at 1X, you will be a hands‑on technical leader respo...
Location
Location
United States , Hayward
Salary
Salary:
90000.00 - 165000.00 USD / Year
1x.tech Logo
1X Technologies
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering, Mechatronics, Manufacturing Engineering, or related field
  • Minimum of 2 years of experience in manufacturing engineering, especially involving precision mechanical or electromechanical assemblies
  • Experience with CAM programming, fixture/tooling design, precision machining of metals or composites
  • Strong understanding of design for manufacturability (DFM) and experience integrating electromechanical systems
  • Familiarity with measurement techniques and standards such as GD&T, tolerance stack analysis, CMM or other high‑precision inspection methods
  • Solid collaboration skills across engineering disciplines, supply chain, QA, and production teams
  • Experience producing robotic actuators, joints, or other motion control systems
  • Exposure to high‑mix, low‑volume environments with frequent design iteration
  • Knowledge or experience with lean manufacturing, Six Sigma, continuous improvement strategies
  • Proficiency with CAD tools, PLM/ERP systems, and manufacturing documentation
Job Responsibility
Job Responsibility
  • Develop and refine manufacturing processes for robotic mobility and control components such as actuators, drive units, precision components, motor housings, and skeletal structures
  • Oversee full manufacturing workflows including fixture design, CAM programming, selection of cutting tools, and inspection/validation methods
  • Deploy automation and lights‑out machining strategies to enable continuous production with minimal human intervention
  • Drive process improvements to reduce cycle time, increase first‑pass yield, and improve reliability of robot hardware
  • Collaborate with design engineering on part geometry, materials, and design changes to ensure manufacturability at every stage
  • Manage change releases and product design revisions into production, focusing on scalability and consistency
  • Act as technical liaison between design, machining, assembly, and quality teams for owned components
  • Support build technicians and operators, maintain work instructions and operating procedures in up‑to‑date state
  • Implement statistical process control (SPC) and quality monitoring practices, take ownership of part or part family quality metrics
  • Troubleshoot production issues such as tolerance stack‑ups, tool wear, misalignment, and assembly variability
What we offer
What we offer
  • Health, dental, and vision insurance
  • 401(k) with company match
  • Paid time off and holidays
  • Fulltime
Read More
Arrow Right

Senior Engineer, Packaging Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...
Location
Location
Malaysia , Batu Kawan
Salary
Salary:
Not provided
sandisk.com Logo
Sandisk
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Masters/Degree in Mechatronic Engineering, Computer Engineering, Computer Science, Software Engineering, Electrical Engineering, Data Science, Artificial Intelligence, Machine Learning or a related technical field
  • Proficiency in statistical data analysis and process simulation software
  • Knowledge of statistical techniques in data science (regression, properties of distribution)
  • Knowledge in machine learning techniques (neural network, machine learning)
  • Knowledge in programming language (python, R) and database (SQL) to perform data mining and analysis
  • Strong analytic skills and problem-solving skills
  • Experience or academic projects related to manufacturing automation, MES integration, or factory data systems
  • Exposure to Industry 4.0 technologies, real-time dashboards, or digital transformation initiatives in manufacturing
  • Passionate about technology and continuous improvement in a factory environment
  • Strong communication and teamwork skills
Job Responsibility
Job Responsibility
  • Develop new process for NPI, transfer to HVM without major quality issues
  • Analyze and optimize existing manufacturing processes to enhance efficiency and product quality
  • Develop and implement process improvement initiatives using methodologies such as Six Sigma and Lean
  • Design and conduct experiments to troubleshoot process issues and validate improvements
  • Develop and maintain factory automation applications with modern frontend tools
  • Develop and optimize Oracle SQL and Microsoft SQL Server queries for data access and reporting
  • Integrate factory systems and manufacturing equipment via web services, API calls, or SECS/GEM communication protocols
  • Support fine-tuning of pre-trained models on domain-specific datasets using techniques or full model training
  • Support system troubleshooting, software testing, and debugging during deployment and production ramp-up
  • Collaborate closely with process, equipment, factory automation and IT teams to deliver robust and efficient automation, machine learning and AI solutions
  • Fulltime
Read More
Arrow Right

Senior Engineer, Packaging Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...
Location
Location
Malaysia , Batu Kawan, Penang
Salary
Salary:
Not provided
sandisk.com Logo
Sandisk
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Masters/Degree in Mechatronic Engineering, Computer Engineering, Computer Science, Software Engineering, Electrical Engineering, Data Science, Artificial Intelligence, Machine Learning or a related technical field
  • Proficiency in statistical data analysis and process simulation software
  • Knowledge of statistical techniques in data science (regression, properties of distribution)
  • Knowledge in machine learning techniques (neural network, machine learning)
  • Knowledge in programming language (python, R) and database (SQL) to perform data mining and analysis
  • Strong analytic skills and problem-solving skills
  • Experience or academic projects related to manufacturing automation, MES integration, or factory data systems
  • Exposure to Industry 4.0 technologies, real-time dashboards, or digital transformation initiatives in manufacturing
  • Passionate about technology and continuous improvement in a factory environment
  • Strong communication and teamwork skills
Job Responsibility
Job Responsibility
  • Develop new process for NPI, transfer to HVM without major quality issues
  • Analyze and optimize existing manufacturing processes to enhance efficiency and product quality
  • Develop and implement process improvement initiatives using methodologies such as Six Sigma and Lean
  • Design and conduct experiments to troubleshoot process issues and validate improvements
  • Develop and maintain factory automation applications with modern frontend tools
  • Develop and optimize Oracle SQL and Microsoft SQL Server queries for data access and reporting
  • Integrate factory systems and manufacturing equipment via web services, API calls, or SECS/GEM communication protocols
  • Support fine-tuning of pre-trained models on domain-specific datasets using techniques or full model training
  • Support system troubleshooting, software testing, and debugging during deployment and production ramp-up
  • Collaborate closely with process, equipment, factory automation and IT teams to deliver robust and efficient automation, machine learning and AI solutions
  • Fulltime
Read More
Arrow Right

Senior Staff Advanced Quality Engineer

ALSO is seeking a highly motivated Senior Staff Advanced Quality Engineer (AQE) ...
Location
Location
United States , Palo Alto
Salary
Salary:
242000.00 - 275000.00 USD / Year
ridealso.com Logo
ALSO
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Mechatronics, Electronics, or a relevant technical field
  • 10+ years of relevant experience in Quality Engineering, R&D, or NPI in a hardware/manufacturing environment
  • Deep specialized knowledge in one or more of the following: Electronics: Electronic product manufacturing processes including SMT, PCB fabrication, PCBA assembly, ICT, and FATP
  • Harnessing: Wire harness manufacturing (crimping, ultrasonic welding, molding) and cable assembly
  • System Integration: Functional testing (FCT), burn-in testing strategies, and high-voltage (Hi-Pot) safety testing
  • Expert ability to read and interpret electrical schematics and wiring diagrams
  • Deep knowledge of APQP and PPAP methodologies
  • Proficiency with Arena PLM (or similar), Jira, and Microsoft/Google suites
  • A self-starter with a process-oriented mindset, able to influence without authority and execute in an extremely fast-paced environment
Job Responsibility
Job Responsibility
  • Drive Upstream Quality: Partner deeply with Electrical Design Engineers to engineer robustness into PCBAs and electrical systems, driving 'Design for Test' (DFT) and 'Design for Manufacturability' (DFM)
  • Risk Management: Lead precision execution of DFMEA for electrical subsystems, defining critical-to-quality features for in-circuit and functional testing
  • NPI Execution: Own the design quality process from start to finish, implementing Safe Launch Plans and Master Control Plans during the New Product Introduction (NPI) phase
  • Technical Problem Solving: Lead failure analysis and root cause investigation for electrical failures (component level and system level) in test or development environments
  • Cross-Functional Leadership: Act as the liaison between R&D in Palo Alto and overseas manufacturing partners, ensuring electrical design intent is perfectly translated into production
What we offer
What we offer
  • Robust health coverage. Excellent health, dental and vision insurance covered up to 100% by ALSO with FSA & HSA options
  • One Medical membership and dedicated insurance advocates
  • Rich fertility and family building benefits with Progyny
  • Flexible time off
  • 401(k) match
  • Fulltime
Read More
Arrow Right

Test Systems Engineering Manager

The Systems Engineering Manager - Test Solutions provides people leadership with...
Location
Location
Australia , Sydney
Salary
Salary:
Not provided
resmed.com Logo
ResMed
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Tertiary qualifications in Mechanical, Mechatronics, Electrical, Software, or related Engineering discipline
  • Minimum 5 years in engineering and people leadership roles, ideally within manufacturing, test, or systems environments
  • Demonstrated success in leading technical teams, driving delivery, and developing talent
  • Strong collaboration, communication, and influence skills across multi-disciplinary teams
  • Proven capability in managing a diverse range of deliverables across multiple projects and stakeholder groups
  • Deep understanding of production test system development, validation, and lifecycle management
  • Experience in DFT/DFM, automation, or PCBA test systems (ICT, FCT, RF)
  • Familiarity with regulated environments (GMP, FDA QSR, ISO Standards)
  • Strategic yet hands-on
  • calm under pressure, proactive in problem-solving
Job Responsibility
Job Responsibility
  • Lead and inspire a team of 9+ engineers (as well as indirect, and contingent members), globally (Sydney, Singapore, Los Angeles), fostering a culture of collaboration, trust, and continuous learning
  • Coach and mentor team members, identifying growth opportunities, providing honest and constructive feedback, and supporting career development
  • Build capability through smart recruitment, targeted development, and clear succession planning to ensure long-term technical strength
  • Translate ResMed’s vision and operational priorities into actionable strategies for test engineering excellence
  • Develop, communicate, and execute a clear engineering strategy that aligns with department objectives and future supply chain priorities
  • Ensure delivery of new and sustaining test systems across NPI and legacy programs — on time, to budget, and to specification
  • Collaborate with Technical Leads to prioritize and resource projects effectively across multiple programs
  • Work across Product, Manufacturing, Quality, and Supplier Engineering teams to align on requirements, readiness, and lifecycle management of test systems
  • Partner with suppliers to develop and maintain their capability to deliver reliable and cost-effective test solutions
  • Represent the Test Engineering team in technical reviews, operational readiness, and strategic planning discussions
  • Fulltime
Read More
Arrow Right

Sr Staff Automation & Controls Engineer

The Sr Staff Automation & Controls Engineer will be at the forefront of designin...
Location
Location
United States , Secaucus
Salary
Salary:
116250.00 - 155000.00 USD / Year
sanmina.com Logo
Sanmina
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelors degree in Engineering, Computer Science, Data Science, or a related field
  • 8+ years of experience in high-volume, high-complexity manufacturing
  • Demonstrated expertise in statistical and analytical methods such as regression analysis, correlation analysis, DOE, SPC, PFMEA, Gauge R&R, and commonality studies
  • Proficiency with data-driven tools such as Minitab, JMP, Python, R, SQL (or equivalent) to analyze and interpret large, complex datasets
  • Track record of driving measurable improvements in yield, reliability, or process robustness
  • Excellent communication skills with the ability to engage at both executive and technical levels
  • Background in electronics assembly, PCBA, servers, or other high-reliability industries (e.g., aerospace, medical devices, automotive, etc.)
  • Experience coaching or mentoring technical teams to upskill in data-driven decision-making
  • Proficiency in CAD tools (SolidWorks, AutoCAD) and industrial automation platforms (Siemens, Allen-Bradley, etc.)
  • Experience with PLC programming, robotic integration (e.g., 6-axis arms, gantry systems), and industrial sensors
Job Responsibility
Job Responsibility
  • Contribute to transformation initiatives, helping set new standards for how ZT approaches manufacturing risk analysis, quality, and continuous improvement
  • Define and implement new systems, processes, or frameworks that support the smart factory vision, including automation, metrology, advanced inspection and testing, and predictive analytics
  • Support NPI (New Product Introduction) by developing scalable automation strategies aligned with product roadmaps
  • Design and implement automated assembly and test equipment for server components, including PCBs, power modules, and cooling systems
  • Collaborate with cross-functional teams to ensure Design for Manufacturability (DFM) and Design for Automation (DFA) Principals are embedded in new product designs
  • Translate DFM and PFMEA outputs into actionable process controls, ensuring proactive prevention of variation rather than reactive correction
  • Develop and optimize mechatronic systems integrating robotics, sensors, actuators, PLCs, vision systems, motion control and software
  • Leverage deep, data-rich environments and tools to generate insights and drive continuous improvement initiatives focused on yield, reliability, cycle time, and throughput
  • Work with equipment vendors to specify, validate, and install automation solutions for medium to high-volume production
  • Apply manufacturing techniques such as precision fastening, soldering, adhesive bonding, and vision-based inspection
What we offer
What we offer
  • Competitive base salary
  • Performance-based annual bonus eligibility
  • 401(k) retirement savings plan
  • Tuition reimbursement for eligible education programs
  • Comprehensive medical, dental, and vision coverage with access to leading providers
  • Mental health resources and employee wellness support programs
  • Company-paid life and disability insurance
  • Paid time off (PTO) and company-paid holidays
  • Parental leave and family care support programs
  • Structured training programs and on-the-job learning opportunities
  • Fulltime
Read More
Arrow Right

Director, Semi Mechatronics Products

In the Global Products Group, we are dedicated to excellence in the design and e...
Location
Location
United States , Fremont
Salary
Salary:
175000.00 - 389000.00 USD / Year
lamresearch.com Logo
Lam Research
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in mechanical or electrical engineering, or a related technical discipline
  • Proven leadership experience in manufacturing, operations, or NPI environments
  • Strong business acumen with demonstrated experience managing financial performance, cost, and operational tradeoffs
  • Hands-on experience supporting new product introduction (NPI) and transitioning products into highvolume manufacturing (HVM)
  • Ability to lead cross-functional teams across manufacturing, engineering, supply chain, and quality
Job Responsibility
Job Responsibility
  • Own overall business and operational performance, including financial results, cost control, and delivery commitments
  • Translate product roadmaps and demand signals into executable operating plans, capacity strategies, and investment priorities
  • Balance agility required for NPI with the discipline needed for sustainable, repeatable manufacturing performance
  • Lead the manufacturing maturation of complex mechatronics products from early builds through high volume production readiness
  • Drive design-for-manufacturing, test, and assembly in close partnership with engineering teams
  • Establish clear readiness criteria and execute structured transitions to external manufacturing partners, ensuring process stability, documentation completeness, and quality performance
  • Accelerate speed to scalable manufacturing while protecting critical IP and know-how
  • Oversee end-to-end factory operations, including assembly, integration, test, and enabling manufacturing capabilities
  • Align supply chain, procurement, and inventory strategies with evolving NPI and ramp requirements
  • Balance cost, risk, and service levels through strong systems discipline and supplier engagement
  • Fulltime
Read More
Arrow Right

Mechanical Engineer - Hands

Figure is an AI robotics company developing autonomous general-purpose humanoid ...
Location
Location
United States , San Jose
Salary
Salary:
120000.00 - 250000.00 USD / Year
figure.ai Logo
Figure
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3+ years of experience in mechanical engineering
  • Bachelor’s or Master’s Degree in Mechanical, Biomechanical, Robotics, Mechatronics, or similar field
  • Expert in using 3D CAD software to design parts with complex geometry
  • Experience owning and designing complex mechanical systems/modules end-to-end, including requirements definition, design tradeoffs, build, and validation
  • Experience working across multiple disciplines with competing and strict technical requirements
  • Experience with engineering analysis and simulation tools (e.g., FEA, MATLAB, or equivalent)
  • Strong understanding of statistical analysis methods (e.g., Cp/Cpk, Design of Experiments (DOE), variance and sensitivity studies) for component- and system-level characterization, validation, and manufacturing readiness
  • Experience shipping hardware at scale, working with contract manufacturers, supporting NPI builds, and driving complex Failure Analysis & Corrective Actions
  • Familiarity with electromechanical integration, including sensors, motors, motor drivers, wire harnesses, and communication interfaces
Job Responsibility
Job Responsibility
  • Design mechanical parts and assemblies in 3D CAD that meet structural, durability, manufacturability, and industrial design requirements
  • Generate accurate 2D drawings using GD&T in accordance with ASME Y14.5
  • Perform tolerance stack-ups and review quality and inspection reports to ensure design intent is met
  • Prototype, build, and test components / systems to validate performance, reliability, and lifetime requirements
  • Lead and support testing / validation efforts at the component, module, and system level
  • Collaborate closely with electrical engineers and systems/integration teams on electromechanical designs
  • Partner with supply chain, contract manufacturers, manufacturing engineers, and quality teams to drive designs through NPI and into production
  • Own and drive Failure Analysis & Corrective Actions (FA/CA) for complex issues discovered during manufacturing, testing, or field use
  • Inspect first articles, support build readiness, and continuously support hardware on development platforms
  • Fulltime
Read More
Arrow Right