CrawlJobs Logo
Teradyne Logo Teradyne · IT - Software Development

Npi Dfm Process Development Engineer

United States, North Reading Employment contract 89300.00 - 189500.00 USD / Year · Job Posted May 30, 2026
Apply Position
Job Link Share

Job Description

Teradyne’s Semiconductor Test Division develops the world’s leading equipment for testing electronics. Inside STD, our Operations New Product Introduction Group is looking for a dynamic, technically skilled Process Engineer to engage our Printed Circuit Board development space. This engineer will use their knowledge of PCBA’s to influence next-generation test instrument product designs from concept to volume release with DFM principles, create and run experiments, and support the development of new assembly processes.

Job Responsibility

  • Collaborate with Hardware Design on New Product initiatives, influencing Printed Circuit Board Assembly product development with Design for Manufacturability principles
  • Drive failure analysis for electrical components and PCBA solder defects
  • Develop and support Teradyne PCBA Design for Manufacturability guidelines and assembly best practices
  • drive improvements and updates to NPI process documentation
  • Support Operations NPI objectives by executing component assessment, manufacturing process development, and fault-down activities for printed circuit board assemblies
  • Work with contract manufacturing teams to support new PCBA initial builds, experiments, and failure analysis
  • Lead NPI Lessons Learned activities, integrating feedback from high-volume manufacturing into NPI processes

Requirements

  • Bachelor’s Degree in Engineering (Manufacturing, Mechanical preferred)
  • 5+ years in printed circuit board assembly and manufacturing
  • Knowledge of PCBA processes (solder paste printing, SMT placement, reflow soldering, aqueous cleaning, automated inspection, ESD principles)
  • Familiarity with IPC-610, IPC-7711/7721, J-STD
  • Experience with PC layout/design review software (Cadence Allegro, Valor)
  • EMS/CM supplier collaboration desirable
  • Able to travel ~10%
  • periodic calls with Asian teams and suppliers
  • This position is not eligible for visa sponsorship
  • US Citizen or U.S. Permanent Resident, Asylee, Refugee or otherwise lawfully admitted under an amnesty program

What we offer

  • medical
  • dental
  • vision
  • Flexible Spending Accounts
  • retirement savings plans
  • life and disability insurance
  • paid vacation & holidays
  • tuition assistance programs
Teradyne - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Npi Dfm Process Development Engineer

8 matching positions

Npi Dfm Process Development Engineer

We are the global test and automation specialists, powering next-generation tech...
Location
Location
United States , North Reading; Agoura Hills; Deer Park
Salary
Salary:
76600.00 - 122500.00 USD / Year
teradyne.com Logo
Teradyne
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Engineering (Manufacturing, Mechanical preferred)
  • 2+ years in printed circuit board assembly and manufacturing
  • Knowledge of PCBA processes (solder paste printing, SMT placement, reflow soldering, aqueous cleaning, automated inspection, ESD principles)
  • Familiarity with IPC-610, IPC-7711/7721, J-STD
  • Experience with PC layout/design review software (Cadence Allegro, Valor)
  • Able to travel ~10%
  • Periodic calls with Asian teams and suppliers
Job Responsibility
Job Responsibility
  • Collaborate with Hardware Design on New Product initiatives, influencing Printed Circuit Board Assembly product development with Design for Manufacturability principles
  • Drive failure analysis for electrical components and PCBA solder defects
  • Develop and support Teradyne PCBA Design for Manufacturability guidelines and assembly best practices
  • Drive improvements and updates to NPI process documentation
  • Support Operations NPI objectives by executing component assessment, manufacturing process development, and fault-down activities for printed circuit board assemblies
  • Work with contract manufacturing teams to support new PCBA initial builds, experiments, and failure analysis
  • Lead NPI Lessons Learned activities, integrating feedback from high-volume manufacturing into NPI processes
What we offer
What we offer
  • Discretionary bonus based on financial performance
  • Medical
  • Dental
  • Vision
  • Flexible Spending Accounts
  • Retirement savings plans
  • Life and disability insurance
  • Paid vacation and holidays
  • Tuition assistance programs
  • Fulltime
Read More
Arrow Right

Npi Dfm Process Development Engineer

Teradyne’s Semiconductor Test Division develops the world’s leading equipment fo...
Location
Location
United States , North Reading
Salary
Salary:
76600.00 - 122500.00 USD / Year
teradyne.com Logo
Teradyne
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Engineering (Manufacturing, Mechanical preferred)
  • 2+ years in printed circuit board assembly and manufacturing
  • Knowledge of PCBA processes (solder paste printing, SMT placement, reflow soldering, aqueous cleaning, automated inspection, ESD principles)
  • Familiarity with IPC-610, IPC-7711/7721, J-STD
  • Experience with PC layout/design review software (Cadence Allegro, Valor)
  • EMS/CM supplier collaboration desirable
  • Able to travel ~10%
  • periodic calls with Asian teams and suppliers
Job Responsibility
Job Responsibility
  • Collaborate with Hardware Design on New Product initiatives, influencing Printed Circuit Board Assembly product development with Design for Manufacturability principles
  • Drive failure analysis for electrical components and PCBA solder defects
  • Develop and support Teradyne PCBA Design for Manufacturability guidelines and assembly best practices
  • drive improvements and updates to NPI process documentation
  • Support Operations NPI objectives by executing component assessment, manufacturing process development, and fault-down activities for printed circuit board assemblies
  • Work with contract manufacturing teams to support new PCBA initial builds, experiments, and failure analysis
  • Lead NPI Lessons Learned activities, integrating feedback from high-volume manufacturing into NPI processes
What we offer
What we offer
  • medical
  • dental
  • vision
  • Flexible Spending Accounts
  • retirement savings plans
  • life and disability insurance
  • paid vacation & holidays
  • tuition assistance programs
  • Fulltime
Read More
Arrow Right

Product Development Engineer, Product Operations

AMD is seeking a Product Development Engineer, Product Operations to join our Da...
Location
Location
United States , Secaucus
Salary
Salary:
110400.00 - 165600.00 USD / Year
amd.com Logo
AMD
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of 1 year of relevant industry experience in product development engineering or a closely related hardware engineering role, including work with design and manufacturing processes for complex hardware products (datacenter, servers, or similar)
  • Bachelor's degree (or foreign equivalent) in Computer Engineering, Electrical Engineering, Mechanical Engineering, or a related field required
  • Master's degree in a relevant engineering field preferred
Job Responsibility
Job Responsibility
  • Cross-Functional Collaboration: Work closely with diverse teams (Engineering Design, Materials, Rack/Server Systems Program Management, etc.) to align design, materials planning, manufacturing, and quality efforts throughout the product development lifecycle
  • Design & DFM Reviews: Review design specifications, CAD drawings, and documentation to ensure compliance with design criteria, industry standards, and manufacturing capabilities
  • Lead Design for Manufacturability (DFM) reviews to ensure products are optimized for efficient, high-quality production
  • Project Scheduling & Readiness: Develop and maintain project schedules and implementation readiness timelines to support on-time new product introductions
  • New Product Introduction (NPI) Leadership: Drive NPI processes by facilitating and leading cross-functional problem-solving meetings with Design, Manufacturing, Test, and Quality Engineering teams
  • Proactively identify and resolve any design or production issues, ensuring smooth product launch and ramp-up
  • Technical Design Reviews: Establish and lead regular development review meetings to deepen technical understanding and coordinate design changes
  • Provide guidance and feedback during design reviews, ensuring feasibility and alignment with manufacturing processes and capabilities
  • Prototype & First Article Oversight: Oversee first article builds and First Article Inspections (FAI) for new products
  • Document FAI requirements, analyze initial build results, and implement improvements to validate product design and manufacturing readiness
What we offer
What we offer
  • AMD benefits at a glance
  • Fulltime
Read More
Arrow Right

Supplier Development Engineer (SDE) – FPCA & PCB

Meta’s Reality Labs is building the future of connection. Our hardware teams des...
Location
Location
China , Suzhou
Salary
Salary:
Not provided
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Chemical Engineering, Materials Science, Mechanical Engineering, or a related technical field
  • 8+ years of industry experience in process engineering, quality engineering, or supplier development specifically focused on FPCA, PCB, or rigid-flex manufacturing
  • Understanding of PCB/FPCA manufacturing processes (e.g., lamination, drilling, plating, etching, surface finishes, routing, SMT, PSA, bending, de-paneling)
  • Skillful working knowledge of industry standards (IPC-A-600, IPC-6012, IPC-6013)
  • Proven experience applying Quality Engineering tools, including SPC, DOE, FMEA, and root cause analysis methodologies
  • Ability to travel up to 50% to supplier manufacturing sites
Job Responsibility
Job Responsibility
  • Process Development & NPI: Lead NPI activities for PCB/FPCA components. Partner with design engineers to conduct DFM reviews for robust PCB/FPCA design and define process flows, material selections, and tooling/fixture requirements
  • Quality Engineering: Establish rigorous quality control and quality assurance standards at the PCB & FPCA supplier level. Develop and implement Inspection SOPs and QCPs
  • Yield Improvement & Outgoing Quality Management: Monitor supplier yield data and downstream vendor quality performance in real-time. Lead cross-functional teams to troubleshoot manufacturing defects using tools like 8D, FMEA, and Fishbone diagrams to implement effective FACA
  • Test Engineering Development: Act as the primary test engineering liaison. Collaborate with Meta EE, supplier test engineers, and equipment vendors to drive tester design, define comprehensive test coverage, and execute tester buy-off
  • Supplier Management & Auditing: Conduct regular on-site supplier audits to assess manufacturing capabilities, process controls, and quality management systems. Drive continuous improvement initiatives (CIP) at vendor facilities
  • Statistical Process Control: Implement and oversee Statistical Process Control (SPC) methodologies (Cp/Cpk analysis) at supplier sites to ensure manufacturing process stability and repeatability for critical dimensions and electrical characteristics
  • Qualification & Reliability: Oversee component-level reliability testing and process qualification (FAI - First Article Inspection, PPAP) to ensure FPCAs and PCBs meet Meta’s exacting standards
Read More
Arrow Right

Senior Process Engineer

As a Senior Process Engineer – Motors Engineering, you’ll play a key role in sha...
Location
Location
United States , Chatsworth
Salary
Salary:
117000.00 - 175000.00 USD / Year
resmed.com Logo
ResMed
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical, Mechatronics, Manufacturing, or Industrial Engineering
  • 5–8 years in manufacturing or process engineering, ideally within medical devices or precision manufacturing
  • Expertise in process validation, DFM/DFA, and continuous improvement
  • Proficiency in SolidWorks, Minitab, and DOE methodology
  • Working knowledge of GMP, ISO 13485, and regulatory compliance
  • Experience in applying functional knowledge and existing methodologies to solve complex problems or execute specialized projects
  • Exercises judgment in selecting methods, techniques and evaluation criteria for obtaining results
  • Strong experience in Design of Experiments (DOE) for process optimization and validation
Job Responsibility
Job Responsibility
  • Design, develop, and optimize motor manufacturing processes and tooling to meet quality, performance, and cost targets
  • Lead process validation (IQ, OQ, PQ) to ensure compliance with FDA QSR, ISO 13485, and GMP requirements
  • Apply Design for Manufacture (DFM) and Design for Assembly (DFA) principles to ensure scalable, robust production
  • Develop and enhance automation, test systems, and fixtures using SolidWorks or equivalent tools
  • Analyze production data using Lean, Six Sigma, and DOE techniques to identify improvement opportunities
  • Implement corrective and preventive actions (CAPA) to improve yield, reduce waste, and enhance reliability
  • Drive automation and process optimization to support long-term sustainability and cost efficiency
  • Partner with R&D, Quality, NPI, and Maintenance to ensure seamless process transfer and ramp-up
  • Mentor and support junior engineers and technicians, building capability within the team
  • Collaborate with suppliers to develop and qualify robust manufacturing processes and components
What we offer
What we offer
  • comprehensive medical, vision, dental, and life, AD&D, short-term and long-term disability insurance, sleep care management, Health Savings Account (HSA), Flexible Spending Account (FSA), commuter benefits, 401(k), Employee Stock Purchase Plan (ESPP), Employee Assistance Program (EAP), and tuition assistance
  • Employees accrue fifteen days Paid Time Off (PTO) in their first year of employment, receive 11 paid holidays plus 3 floating days and are eligible for 14 weeks of primary caregiver or two weeks of secondary caregiver leave when welcoming new family members
  • Fulltime
Read More
Arrow Right

NPI Alignment Engineer

Aeva is seeking to hire a talented and motivated NPI Alignment Engineer to work ...
Location
Location
United States , Mountain View
Salary
Salary:
132400.00 - 179200.00 USD / Year
aeva.com Logo
Aeva
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3-5 years experience developing custom designed optoelectronic active alignment equipment and alignment processes
  • Hands-on experience developing and debugging active aligner hardware and processes
  • Hands-on experience creating and modifying alignment sequences in custom equipment GUIs
  • Experience optimizing processes for cycle time, yield, and performance
  • A strong understanding and comfort of geometric optics and mechanical alignment hardware
  • Experience specifying and developing original alignment techniques and algorithms
  • Experience with automation hardware using precision stages, automated dispensing, and pneumatics
  • Strong knowledge of epoxies used for active alignment
  • Years of accumulated knowledge of working with equipment suppliers and contract manufacturers
  • Excellent project management and communication skills
Job Responsibility
Job Responsibility
  • Development from concept to production release of in-house and outsourced active alignment equipment
  • Work remotely and on-site with active alignment equipment manufacturers to solve equipment hardware and process related issues
  • Oversee failure analysis of process and assembly related issues
  • Source and buy-off active alignment required for production
  • Provide DFM feedback to the engineering team and own process related design decisions as related to active alignment
What we offer
What we offer
  • Very competitive compensation and meaningful stock grants
  • Exceptional benefits: Medical, Dental, Vision, and more
  • Unlimited PTO
  • Fulltime
Read More
Arrow Right
New

Manufacturing Design Engineer

The RL (Reality Labs) Team at Meta is helping more people around the world come ...
Location
Location
United States , Sunnyvale
Salary
Salary:
173000.00 - 245000.00 USD / Year
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS degree or higher in Optical, Mechanical, Chemical, Engineering Physics or equivalent experience
  • 5+ years of technical hands-on experience with mechanical, display, camera or optical manufacturing
  • Experience partnering with multiple cross functional partners
  • Experience with consumer electronics manufacturing and/or highly cosmetic parts
  • Familiar with statistical analysis from data gathered
  • Familiar with simple quality engineer works, such as defect characterization, yield summary report and driving yield bridge FACA activities
Job Responsibility
Job Responsibility
  • Drive manufacturing process innovation in optical and mechanical component solutions for Smart Glass, and AR/VR products
  • Work with Hardware Engineering, Sourcing, Quality and Tech Ops Team to identify, audit and select the best suppliers’ partner (SPOR) to manufacture our products
  • Responsible for CMF processes (PVD, CVD, sputtering, printing, coating, painting), cover window manufacturing, film/lens lamination, die cut, laser cutting, adhesion (i.e. Optical Crystal Adhesion), cover window coating process development (i.e. AR coating, IR ink development, optical coating)
  • Process DFM, process bring up and qualifications
  • Develop MP intent equipment, process and materials
  • Set CTQ criteria to validate key processes
  • Run statistical analysis from data collected through trials & investigations
  • Work with the internal Quality Team to define quality characterization, inspection methodology, and qualification of components before components ship to downstream vendors
  • Work with hardware engineering, quality and Reliability Teams to debug optical/mechanical issues related to component development from NPI to ramp. Identify root cause and provide improvements via process optimization and qualifications
  • Travel to vendor sites to validate and support development
What we offer
What we offer
  • bonus
  • equity
  • benefits
  • Fulltime
Read More
Arrow Right

Global Supply Manager (GSM), Optics

We are seeking a Display technology & Optics (D&O) Strategic Sourcing Manager to...
Location
Location
United States , Sunnyvale
Salary
Salary:
199000.00 - 272000.00 USD / Year
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering (Optical, Mechanical, Materials, Chemical, or related field), Supply Chain Management, or Business
  • 8+ years of experience in strategic sourcing, supply chain management, or procurement, preferably in consumer electronics, optics, or display technologies
  • Demonstrated track record of complex commercial negotiations in delivering significant cost savings
  • Experience managing optical or display component suppliers, with understanding of film, coating, or precision optics manufacturing
  • Analytical skills with proficiency in should-cost modeling, TCO analysis, and data-driven decision making
  • Proven ability to build and manage relationships across cross-functional teams in a fast-paced, matrixed organization
  • Experience with supplier qualification processes, quality systems (ISO, IATF), and production ramp-up management
Job Responsibility
Job Responsibility
  • Strategic Sourcing & Supply Management: End-to-end sourcing strategy for optical film components across AR/VR product portfolio
  • Develop and execute multi-year commodity strategies
  • Drive competitive cost structures through strategic negotiations, should-cost modeling, and TCO analysis
  • Establish and manage long-term supply agreements
  • Build and maintain resilient supply base
  • Cost and Supply Negotiation: Lead commercial negotiations with optical film suppliers to achieve cost targets
  • Develop should-cost models for D-film, L-film
  • Drive year-over-year cost reduction programs
  • Negotiate capacity commitments, lead time improvements
  • Manage NRE costs and tooling investments
What we offer
What we offer
  • bonus
  • equity
  • benefits
  • Fulltime
Read More
Arrow Right