Non-Destructive Testing Operator Job at Airbus (Itajubá)

Technical Expert Engineering, Non-Destructive Testing

Location

Canada , St-Laurent

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Hold an engineering degree or a college diploma in engineering (Materials, Metallurgy or Mechanical), with ten (10) years of experience
Certified as a NAS-410 NDT Level 3 or Level 2 in Ultrasonic testing
Certified in or have an in-depth knowledge of one of the following inspection methods: Radiography, Eddy Current, Penetrant, Magnetic Particle, and Infrared Thermography testing
Minimum of five years of experience in Ultrasonic inspection of aerospace composite material in a production environment, using automated and/or semi-automated Ultrasonic inspection systems
Knowledgeable about typical NDT aerospace codes and standards, NADCAP, and with the development of non-destructive inspection procedures
Familiar with the NDT inspection methodologies of composite materials, assemblies, aircraft structures, aerospace terminology and technical drawings
Know how to conduct NDT technical audits in-line with your field of expertise
Have shown strong leadership, problem solving, project and time/priority management skills in past assignments and require minimum supervision
Accept to travel occasionally on a last-minute notice
Have a good working knowledge of computer software such as Microsoft Office

Job Responsibility

Provide primary technical expertise and leadership in resolving manufacturing issues in the Operations, Quality, Customer Support and Supply Chain departments
Perform technical audits of suppliers and follow-up on corrective actions
Develop in-service Non-Destructive Testing (NDT) inspection procedures for various aircraft platforms
Design NDT Calibration Reference Standards for in-service use
Participate to the development of technical documents related to NDT processes
Offer NDT expertise and support to the Bombardier Experimental group for the inspection of test rigs
Perform technical reviews (Procedures, Technique sheets) of manufacturing NDT processes requiring approval
Participate to research and development projects involving new materials and emerging/advanced NDT technologies
Be required to handle difficult issues and make challenging technical decisions

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Welding Quality Specialist

We are seeking a dedicated Welding Quality Specialist with at least 3 years of w...

Location

United States , Mandeville

Salary:

Not provided

BOLLINGER MISSISSIPPI SHIPBUILDING LLC

Expiration Date

Until further notice

Requirements

Minimum of 3 years of welding manufacturing experience in shipyard or manufacturing and a bachelor’s degree in engineering, industrial technology, or equivalent specialized education OR 6 years of shipyard manufacturing experience with a technical degree in a similar discipline, supported by working knowledge of quality management systems
Auditing experience in quality management systems preferred in shipyard, manufacturing or similar setting
Certified Welding Inspector (CWI) certification is preferred
Strong knowledge in ASME, AWS, ABS, and/or related technical documents regarding welding practices/procedures
NDT Level II certification(s) preferred
Strong organizational, analytical, and problem-solving skills with an ability to apply corrective and preventive measures to streamline processes
Knowledgeable of quality system concepts in accordance with established standards
Strong communication skills, both oral and written
Basic knowledge in non-destructive testing or other testing methods
Basic computer skills including knowledge of Microsoft Office applications

Job Responsibility

Serves as a key member of the Operations Support Quality Group, promoting quality policy, objectives, and system directives through training and mentoring, particularly in manufacturing areas throughout the Company
Promotes and supports improvement and preventive action processes, including problem-solving techniques such as root cause analysis, implementing action plans, and verifying solution effectiveness
Provides welding technology and NDT administration and support as needed
Assists in monitoring welding processes, evaluates performance data, develops process improvement initiatives, and implements welding technology
Delivers training in quality concepts and weld processes
Conducts internal audits to meet ISO 9001 requirements, performs program review to support Company initiatives, and supports external audits as required
Performs technical writing to create or revise welding procedures and supporting documents
Other duties assigned or requested by Management

What we offer

Competitive Pay
Comprehensive Benefits Package
Career Development
Cutting-Edge Projects
Positive Work Environment & Company Values

Fulltime

Welding Quality Specialist

We are seeking a dedicated Welding Quality Specialist with at least 3 years of w...

Location

United States , Amelia

Salary:

Not provided

BOLLINGER MISSISSIPPI SHIPBUILDING LLC

Expiration Date

Until further notice

Requirements

Minimum of 3 years of welding manufacturing experience in shipyard or manufacturing and a bachelor’s degree in engineering, industrial technology, or equivalent specialized education OR 6 years of shipyard manufacturing experience with a technical degree in a similar discipline, supported by working knowledge of quality management systems
Auditing experience in quality management systems preferred in shipyard, manufacturing or similar setting
Certified Welding Inspector (CWI) certification is preferred
Strong knowledge in ASME, AWS, ABS, and/or related technical documents regarding welding practices/procedures
NDT Level II certification(s) preferred
Strong organizational, analytical, and problem-solving skills with an ability to apply corrective and preventive measures to streamline processes
Knowledgeable of quality system concepts in accordance with established standards
Strong communication skills, both oral and written
Basic knowledge in non-destructive testing or other testing methods
Basic computer skills including knowledge of Microsoft Office applications

Job Responsibility

Serves as a key member of the Operations Support Quality Group, promoting quality policy, objectives, and system directives through training and mentoring, particularly in manufacturing areas throughout the Company
Promotes and supports improvement and preventive action processes, including problem-solving techniques such as root cause analysis, implementing action plans, and verifying solution effectiveness
Provides welding technology and NDT administration and support as needed
Assists in monitoring welding processes, evaluates performance data, develops process improvement initiatives, and implements welding technology
Delivers training in quality concepts and weld processes
Conducts internal audits to meet ISO 9001 requirements, performs program review to support Company initiatives, and supports external audits as required
Performs technical writing to create or revise welding procedures and supporting documents
Other duties assigned or requested by Management

What we offer

Competitive Pay
Comprehensive Benefits Package
Career Development
Cutting-Edge Projects
Positive Work Environment & Company Values

Welding Quality Specialist

We are seeking a dedicated Welding Quality Specialist with at least 3 years of w...

Location

United States , Metairie

Salary:

Not provided

BOLLINGER MISSISSIPPI SHIPBUILDING LLC

Expiration Date

Until further notice

Requirements

Minimum of 3 years of welding manufacturing experience in shipyard or manufacturing and a bachelor’s degree in engineering, industrial technology, or equivalent specialized education OR 6 years of shipyard manufacturing experience with a technical degree in a similar discipline, supported by working knowledge of quality management systems
Auditing experience in quality management systems preferred in shipyard, manufacturing or similar setting
Certified Welding Inspector (CWI) certification is preferred
Strong knowledge in ASME, AWS, ABS, and/or related technical documents regarding welding practices/procedures
NDT Level II certification(s) preferred
Strong organizational, analytical, and problem-solving skills with an ability to apply corrective and preventive measures to streamline processes
Knowledgeable of quality system concepts in accordance with established standards
Strong communication skills, both oral and written
Basic knowledge in non-destructive testing or other testing methods
Basic computer skills including knowledge of Microsoft Office applications

Job Responsibility

Serves as a key member of the Operations Support Quality Group, promoting quality policy, objectives, and system directives through training and mentoring, particularly in manufacturing areas throughout the Company
Promotes and supports improvement and preventive action processes, including problem-solving techniques such as root cause analysis, implementing action plans, and verifying solution effectiveness
Provides welding technology and NDT administration and support as needed
Assists in monitoring welding processes, evaluates performance data, develops process improvement initiatives, and implements welding technology
Delivers training in quality concepts and weld processes
Conducts internal audits to meet ISO 9001 requirements, performs program review to support Company initiatives, and supports external audits as required
Performs technical writing to create or revise welding procedures and supporting documents
Other duties assigned or requested by Management

What we offer

Competitive Pay
Comprehensive Benefits Package
Career Development
Cutting-Edge Projects
Positive Work Environment & Company Values

Fulltime

New

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Join our Manufacturing Technologies team to lead the critical industrialization ...

Location

Spain , Illescas

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Strong engineering background with a specialization in Aeronautical Composite Materials
Proven experience in one or more of the following specific technologies: Layup technologies: FPM (Flat Ply Placement) and AFP (Automated Fiber Placement)
Hot Debulking (This is a highly desired qualification)
Autoclave curing processes and bagging techniques
Trimming, drilling, and assembly of composite parts
Knowledge of Dimensional Inspections, Photogrammetry, and Non-Destructive Testing (NDT) methods
Demonstrated ability to define, set up, and industrialize manufacturing systems in a factory environment
Experience with prepreg materials and an understanding of their behavior compared to dry fiber
Competence in project management, specifically regarding planning, cost control, and industrial risk management
Familiarity with environmental solutions and Health & Safety practices in an industrial setting

Job Responsibility

Lead the industrialization of composite manufacturing lines at the Illescas site, ensuring alignment with program goals regarding production rate, recurring costs, and quality
Define and qualify specific manufacturing processes, with a primary focus on Layup technologies and Hot Debulking desirable
Oversee the end-to-end composite cycle, including bagging, autoclave cure cycles, debugging/demoulding, and subsequent trimming and drilling operations
Analyze manufacturing results through rigorous inspection protocols, including dimensional inspections and Photogrammetry
Manage process validation using Non-Destructive Testing (NDT) and destructive testing methods to ensure structural integrity
Lead troubleshooting activities on the shop floor to resolve technical issues during the ramp-up phase
Act as the focal point for Airbus Process Instructions (AIPIs), ensuring global standards are adapted and maintained for local industrial application
Collaborate with Engineering and Quality teams to co-design processes that enhance manufacturability (DFM)
Utilize project management and quality tools (PFMEA, PDCA, Risk Analysis) to mitigate industrialization risks

What we offer

Vacation days plus additional days-off along the year
Attractive salary
Hybrid model of working when possible, promoting the work-life balance
Collective transport service in some sites
Benefits such as health insurance, employee stock options, retirement plan, or study grants
On-site facilities (among others): free canteen, kindergarten, medical office
Possibility to collaborate in different social and corporate social responsibility initiatives
Excellent upskilling opportunities and great development prospects in a multicultural environment
Special rates in products & benefits

Fulltime

New

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Join our Manufacturing Technologies team to lead the critical industrialization ...

Location

Spain , Illescas

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Strong engineering background with a specialization in Aeronautical Composite Materials
Proven experience in Layup technologies: FPM (Flat Ply Placement) and AFP (Automated Fiber Placement)
Experience with Hot Debulking (highly desired)
Knowledge of Autoclave curing processes and bagging techniques
Knowledge of Trimming, drilling, and assembly of composite parts
Knowledge of Dimensional Inspections, Photogrammetry, and Non-Destructive Testing (NDT) methods
Demonstrated ability to define, set up, and industrialize manufacturing systems in a factory environment
Experience with prepreg materials and an understanding of their behavior compared to dry fiber
Competence in project management, specifically regarding planning, cost control, and industrial risk management
Familiarity with environmental solutions and Health & Safety practices in an industrial setting

Job Responsibility

Lead the industrialization of composite manufacturing lines at the Illescas site
Define and qualify specific manufacturing processes, with a primary focus on Layup technologies and Hot Debulking
Oversee the end-to-end composite cycle, including bagging, autoclave cure cycles, debugging/demoulding, and subsequent trimming and drilling operations
Analyze manufacturing results through rigorous inspection protocols, including dimensional inspections and Photogrammetry
Manage process validation using Non-Destructive Testing (NDT) and destructive testing methods
Lead troubleshooting activities on the shop floor to resolve technical issues during the ramp-up phase
Act as the focal point for Airbus Process Instructions (AIPIs)
Collaborate with Engineering and Quality teams to co-design processes that enhance manufacturability (DFM)
Utilize project management and quality tools (PFMEA, PDCA, Risk Analysis) to mitigate industrialization risks

What we offer

Vacation days plus additional days-off along the year
Attractive salary
Hybrid model of working when possible, promoting the work-life balance
Collective transport service in some sites
Benefits such as health insurance, employee stock options, retirement plan, or study grants
On-site facilities (among others): free canteen, kindergarten, medical office
Possibility to collaborate in different social and corporate social responsibility initiatives
Excellent upskilling opportunities and great development prospects in a multicultural environment
Special rates in products & benefits

Fulltime

New

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Join our Manufacturing Technologies team to lead the critical industrialization ...

Location

Spain , Illescas

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Strong engineering background with a specialization in Aeronautical Composite Materials
Proven experience in Layup technologies: FPM (Flat Ply Placement) and AFP (Automated Fiber Placement)
Hot Debulking (highly desired)
Autoclave curing processes and bagging techniques
Trimming, drilling, and assembly of composite parts
Knowledge of Dimensional Inspections, Photogrammetry, and Non-Destructive Testing (NDT) methods
Demonstrated ability to define, set up, and industrialize manufacturing systems in a factory environment
Experience with prepreg materials and an understanding of their behavior compared to dry fiber
Competence in project management, specifically regarding planning, cost control, and industrial risk management
Familiarity with environmental solutions and Health & Safety practices in an industrial setting

Job Responsibility

Lead the industrialization of composite manufacturing lines at the Illescas site
Define and qualify specific manufacturing processes, with a primary focus on Layup technologies and Hot Debulking
Oversee the end-to-end composite cycle, including bagging, autoclave cure cycles, debugging/demoulding, and subsequent trimming and drilling operations
Analyze manufacturing results through rigorous inspection protocols, including dimensional inspections and Photogrammetry
Manage process validation using Non-Destructive Testing (NDT) and destructive testing methods
Lead troubleshooting activities on the shop floor to resolve technical issues during the ramp-up phase
Act as the focal point for Airbus Process Instructions (AIPIs)
Collaborate with Engineering and Quality teams to co-design processes that enhance manufacturability (DFM)
Utilize project management and quality tools (PFMEA, PDCA, Risk Analysis) to mitigate industrialization risks

What we offer

Continuous professional development within a global leader in aerospace

Fulltime

New

Pfd operator

You will be joining a highly skilled production team where quality and precision...

Location

United Kingdom , Broughton

Salary:

Not provided

Airbus

Expiration Date

April 30, 2026

Requirements

Formal Engineering Apprenticeship or Equivalent: Completion of a full, relevant Aerospace or Engineering Apprenticeship (e.g., Mechanical Fitting, Sheet Metal Worker, or Maintenance Fitter) or possession of an equivalent relevant technical qualification (e.g., NVQ Level 3 or HNC/HND in an engineering discipline)
NDT Level 2 Certification (Penetrant Testing - PT): Specific certification in Penetrant Testing (PT), typically to at least Level 2 in accordance with a recognised standard like EN 4179 (Aerospace), PCN (Personnel Certification in Non-Destructive Testing), or ASNT (American Society for Non-Destructive Testing)
Health and Safety Training: A robust understanding and certification in relevant Health, Safety, and Environment (HSE) standards, particularly those related to handling chemicals (the penetrant materials) and working in an industrial/workshop environment
Industry/Process Specific Experience: Demonstrable experience in an aerospace manufacturing, maintenance, repair, and overhaul (MRO), or heavy engineering environment, with practical experience in NDT techniques and quality control processes

Job Responsibility

Perform and assure structural assemblies of metallic and/or composite components following drawing requirements and applicable standards
Carry out the precise preparation of components, including both metallic and composite stacks, prior to assembly
Perform drilling, ensure structural continuity, and execute fastening of parts, applying necessary surface protections (e.g., sealant, alodine)
Strictly ensure that all operations are executed according to drawing requirements and quality standards, maintaining full traceability in the system
Apply the Environmental Management System and maintain order to guarantee a safe work area

What we offer

Competitive salary
Annual profit share
Contributory pension
Share options
Employee discounts (e.g., tax-free technology scheme, shopping discounts)
35-hour working week
Personalised development plan
Access to Airbus Leadership University
Unlimited access to over 10,000 E-learning courses
Wellbeing benefits (including 24/7 online GP and mental health support)

Fulltime

Non-Destructive Testing Operator

Airbus

Location:
Brazil , Itajubá

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
February 22, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Non-Destructive Testing Operator

Technical Expert Engineering, Non-Destructive Testing

Welding Quality Specialist

Welding Quality Specialist

Welding Quality Specialist

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Pfd operator

Non-Destructive Testing Operator

Airbus

Location:Brazil , Itajubá

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:February 22, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Non-Destructive Testing Operator

Technical Expert Engineering, Non-Destructive Testing

Welding Quality Specialist

Welding Quality Specialist

Welding Quality Specialist

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Pfd operator

Location:
Brazil , Itajubá

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
February 22, 2026