Non Destructive Test Engineer Job at Risktec Solutions (Derby)

Technical Expert Engineering, Non-Destructive Testing

Location

Canada , St-Laurent

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Hold an engineering degree or a college diploma in engineering (Materials, Metallurgy or Mechanical), with ten (10) years of experience
Certified as a NAS-410 NDT Level 3 or Level 2 in Ultrasonic testing
Certified in or have an in-depth knowledge of one of the following inspection methods: Radiography, Eddy Current, Penetrant, Magnetic Particle, and Infrared Thermography testing
Minimum of five years of experience in Ultrasonic inspection of aerospace composite material in a production environment, using automated and/or semi-automated Ultrasonic inspection systems
Knowledgeable about typical NDT aerospace codes and standards, NADCAP, and with the development of non-destructive inspection procedures
Familiar with the NDT inspection methodologies of composite materials, assemblies, aircraft structures, aerospace terminology and technical drawings
Know how to conduct NDT technical audits in-line with your field of expertise
Have shown strong leadership, problem solving, project and time/priority management skills in past assignments and require minimum supervision
Accept to travel occasionally on a last-minute notice
Have a good working knowledge of computer software such as Microsoft Office

Job Responsibility

Provide primary technical expertise and leadership in resolving manufacturing issues in the Operations, Quality, Customer Support and Supply Chain departments
Perform technical audits of suppliers and follow-up on corrective actions
Develop in-service Non-Destructive Testing (NDT) inspection procedures for various aircraft platforms
Design NDT Calibration Reference Standards for in-service use
Participate to the development of technical documents related to NDT processes
Offer NDT expertise and support to the Bombardier Experimental group for the inspection of test rigs
Perform technical reviews (Procedures, Technique sheets) of manufacturing NDT processes requiring approval
Participate to research and development projects involving new materials and emerging/advanced NDT technologies
Be required to handle difficult issues and make challenging technical decisions

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

New

PhD Student Non-destructive Testing Adhesive Bonds

At Volkswagen Passenger Cars, you will work in production planning as part of a ...

Location

Germany , Wolfsburg

Salary:

Not provided

Volkswagen AG

Expiration Date

Until further notice

Requirements

Good to very good university degree qualifying for doctoral studies in a technical field, ideally with a focus on mechanical engineering, electrical engineering, automotive engineering, or a related discipline
Knowledge of non‑destructive testing methods
Strong analytical skills and the ability to understand and clearly communicate complex relationships
Excellent problem‑solving abilities and a willingness to develop innovative ideas
Strong aptitude for interdisciplinary collaboration
High level of teamwork, independence, and reliability

Job Responsibility

Evaluating, assessing, and implementing non‑destructive testing methods with a focus on adhesive bonds, in collaboration with Quality Assurance and external partners
Analyzing, describing, and assessing methods regarding their suitability for non‑destructive inspection
Implementing a non‑destructive testing method for adhesive bonds with respect to adhesion quality
Experimentally validating the non‑destructive testing technology according to the requirements of the technology development process — from principle and concept feasibility through to series readiness

What we offer

Attractive salary & 30 vacation days (+ 24.12. and 31.12. off)
35-hour week, flexible working hours, remote work
Special conditions for the purchase and leasing of vehicles
Free seminars on scientific work and interdisciplinary qualifications
Participation in the doctoral network for scientific exchange with science representatives and other doctoral candidates within the Volkswagen Group

Fulltime

Engineer - NDT

Location

India , Chennai

Salary:

Not provided

Nordex Group

Expiration Date

Until further notice

Requirements

Engineering Graduate, completed training as an inspector in NDT (Non-Destructive Testing)
ASNT UT (Ultrasonic Inspection) level 2 certificate
Having reliable knowledge in A-scan and B-Scan
Minimum 3-5 years’ Experience in Independent performance of Non-destructive material tests non-metallic materials (CFRP, GFRP and adhesives) in Wind power industries
Languages: English / Tamil / Hindi

Job Responsibility

Independent performance of Non-destructive material tests non-metallic materials (CFRP, GFRP and adhesives)
Evaluate test results according to applicable standards, regulations or specifications and documentation of test results of non-destructive tests
Preparation and implementation of reports for inspection
Performing UT & VT inspection on wind turbine blades

Fulltime

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Join our Manufacturing Technologies team to lead the critical industrialization ...

Location

Spain , Illescas

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Strong engineering background with a specialization in Aeronautical Composite Materials
Proven experience in Layup technologies: FPM (Flat Ply Placement) and AFP (Automated Fiber Placement)
Hot Debulking (highly desired)
Autoclave curing processes and bagging techniques
Trimming, drilling, and assembly of composite parts
Knowledge of Dimensional Inspections, Photogrammetry, and Non-Destructive Testing (NDT) methods
Demonstrated ability to define, set up, and industrialize manufacturing systems in a factory environment
Experience with prepreg materials and an understanding of their behavior compared to dry fiber
Competence in project management, specifically regarding planning, cost control, and industrial risk management
Familiarity with environmental solutions and Health & Safety practices in an industrial setting

Job Responsibility

Lead the industrialization of composite manufacturing lines at the Illescas site
Define and qualify specific manufacturing processes, with a primary focus on Layup technologies and Hot Debulking
Oversee the end-to-end composite cycle, including bagging, autoclave cure cycles, debugging/demoulding, and subsequent trimming and drilling operations
Analyze manufacturing results through rigorous inspection protocols, including dimensional inspections and Photogrammetry
Manage process validation using Non-Destructive Testing (NDT) and destructive testing methods
Lead troubleshooting activities on the shop floor to resolve technical issues during the ramp-up phase
Act as the focal point for Airbus Process Instructions (AIPIs)
Collaborate with Engineering and Quality teams to co-design processes that enhance manufacturability (DFM)
Utilize project management and quality tools (PFMEA, PDCA, Risk Analysis) to mitigate industrialization risks

What we offer

Continuous professional development within a global leader in aerospace

Fulltime

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Join our Manufacturing Technologies team to lead the critical industrialization ...

Location

Spain , Illescas

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Strong engineering background with a specialization in Aeronautical Composite Materials
Proven experience in Layup technologies: FPM (Flat Ply Placement) and AFP (Automated Fiber Placement)
Experience with Hot Debulking (highly desired)
Knowledge of Autoclave curing processes and bagging techniques
Knowledge of Trimming, drilling, and assembly of composite parts
Knowledge of Dimensional Inspections, Photogrammetry, and Non-Destructive Testing (NDT) methods
Demonstrated ability to define, set up, and industrialize manufacturing systems in a factory environment
Experience with prepreg materials and an understanding of their behavior compared to dry fiber
Competence in project management, specifically regarding planning, cost control, and industrial risk management
Familiarity with environmental solutions and Health & Safety practices in an industrial setting

Job Responsibility

Lead the industrialization of composite manufacturing lines at the Illescas site
Define and qualify specific manufacturing processes, with a primary focus on Layup technologies and Hot Debulking
Oversee the end-to-end composite cycle, including bagging, autoclave cure cycles, debugging/demoulding, and subsequent trimming and drilling operations
Analyze manufacturing results through rigorous inspection protocols, including dimensional inspections and Photogrammetry
Manage process validation using Non-Destructive Testing (NDT) and destructive testing methods
Lead troubleshooting activities on the shop floor to resolve technical issues during the ramp-up phase
Act as the focal point for Airbus Process Instructions (AIPIs)
Collaborate with Engineering and Quality teams to co-design processes that enhance manufacturability (DFM)
Utilize project management and quality tools (PFMEA, PDCA, Risk Analysis) to mitigate industrialization risks

What we offer

Vacation days plus additional days-off along the year
Attractive salary
Hybrid model of working when possible, promoting the work-life balance
Collective transport service in some sites
Benefits such as health insurance, employee stock options, retirement plan, or study grants
On-site facilities (among others): free canteen, kindergarten, medical office
Possibility to collaborate in different social and corporate social responsibility initiatives
Excellent upskilling opportunities and great development prospects in a multicultural environment
Special rates in products & benefits

Fulltime

Process Engineer for Industrialization & NextGen Aircrafts – Composite Manufacturing

Join our Manufacturing Technologies team to lead the critical industrialization ...

Location

Spain , Illescas

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Strong engineering background with a specialization in Aeronautical Composite Materials
Proven experience in one or more of the following specific technologies: Layup technologies: FPM (Flat Ply Placement) and AFP (Automated Fiber Placement)
Hot Debulking (This is a highly desired qualification)
Autoclave curing processes and bagging techniques
Trimming, drilling, and assembly of composite parts
Knowledge of Dimensional Inspections, Photogrammetry, and Non-Destructive Testing (NDT) methods
Demonstrated ability to define, set up, and industrialize manufacturing systems in a factory environment
Experience with prepreg materials and an understanding of their behavior compared to dry fiber
Competence in project management, specifically regarding planning, cost control, and industrial risk management
Familiarity with environmental solutions and Health & Safety practices in an industrial setting

Job Responsibility

Lead the industrialization of composite manufacturing lines at the Illescas site, ensuring alignment with program goals regarding production rate, recurring costs, and quality
Define and qualify specific manufacturing processes, with a primary focus on Layup technologies and Hot Debulking desirable
Oversee the end-to-end composite cycle, including bagging, autoclave cure cycles, debugging/demoulding, and subsequent trimming and drilling operations
Analyze manufacturing results through rigorous inspection protocols, including dimensional inspections and Photogrammetry
Manage process validation using Non-Destructive Testing (NDT) and destructive testing methods to ensure structural integrity
Lead troubleshooting activities on the shop floor to resolve technical issues during the ramp-up phase
Act as the focal point for Airbus Process Instructions (AIPIs), ensuring global standards are adapted and maintained for local industrial application
Collaborate with Engineering and Quality teams to co-design processes that enhance manufacturability (DFM)
Utilize project management and quality tools (PFMEA, PDCA, Risk Analysis) to mitigate industrialization risks

What we offer

Vacation days plus additional days-off along the year
Attractive salary
Hybrid model of working when possible, promoting the work-life balance
Collective transport service in some sites
Benefits such as health insurance, employee stock options, retirement plan, or study grants
On-site facilities (among others): free canteen, kindergarten, medical office
Possibility to collaborate in different social and corporate social responsibility initiatives
Excellent upskilling opportunities and great development prospects in a multicultural environment
Special rates in products & benefits

Fulltime

Senior Structural Engineer

We are looking for a Structural Engineer to lead our in-house team to develop st...

Location

United States , Berwick

Salary:

Not provided

iBUILT

Expiration Date

Until further notice

Requirements

Professional engineering license, PE is a MUST, S.E a plus
A minimum of 10 years of experience in structural engineering and at least 3 years of experience leading a project team
Design experience in multi-family, residential, commercial and industrial buildings
Experience with steel structural systems
A core understanding of current design codes, e.g. ASCE 7, OSSC 2014, ACI 318, etc.
Experience applying new technology, software, and scripting to improve traditional design, manufacturing, and construction processes
Execution of the structural design and engineering on at least one building project over 100,000 square feet
Interest or experience with prototyping and developing new products or design concepts
Proficient with industry standard design tools (Revit & AutoCAD) and structural design software (such as Autodesk Advance Steel, Autodesk Robot Structural Analysis, Risa-3D, Parametric 3D Cad, Solidworks FEA)
Experience required in conducting destructive and non-destructive testing

Job Responsibility

Performing structural engineering calculations and performance simulations including sizing, selecting, and specifying Structural components and systems and ensure designs are compliant with the company’s principles of design for manufacturing, assembly, and systems integration
preparing drawings
developing and monitoring proposals
scopes and budgets.

What we offer

competitive salary and benefits package

Welding Quality Specialist

We are seeking a dedicated Welding Quality Specialist with at least 3 years of w...

Location

United States , Mandeville

Salary:

Not provided

BOLLINGER MISSISSIPPI SHIPBUILDING LLC

Expiration Date

Until further notice

Requirements

Minimum of 3 years of welding manufacturing experience in shipyard or manufacturing and a bachelor’s degree in engineering, industrial technology, or equivalent specialized education OR 6 years of shipyard manufacturing experience with a technical degree in a similar discipline, supported by working knowledge of quality management systems
Auditing experience in quality management systems preferred in shipyard, manufacturing or similar setting
Certified Welding Inspector (CWI) certification is preferred
Strong knowledge in ASME, AWS, ABS, and/or related technical documents regarding welding practices/procedures
NDT Level II certification(s) preferred
Strong organizational, analytical, and problem-solving skills with an ability to apply corrective and preventive measures to streamline processes
Knowledgeable of quality system concepts in accordance with established standards
Strong communication skills, both oral and written
Basic knowledge in non-destructive testing or other testing methods
Basic computer skills including knowledge of Microsoft Office applications

Job Responsibility

Serves as a key member of the Operations Support Quality Group, promoting quality policy, objectives, and system directives through training and mentoring, particularly in manufacturing areas throughout the Company
Promotes and supports improvement and preventive action processes, including problem-solving techniques such as root cause analysis, implementing action plans, and verifying solution effectiveness
Provides welding technology and NDT administration and support as needed
Assists in monitoring welding processes, evaluates performance data, develops process improvement initiatives, and implements welding technology
Delivers training in quality concepts and weld processes
Conducts internal audits to meet ISO 9001 requirements, performs program review to support Company initiatives, and supports external audits as required
Performs technical writing to create or revise welding procedures and supporting documents
Other duties assigned or requested by Management

What we offer

Competitive Pay
Comprehensive Benefits Package
Career Development
Cutting-Edge Projects
Positive Work Environment & Company Values

Fulltime

Non Destructive Test Engineer

Risktec Solutions

Location:
United Kingdom , Derby

Category:
Consulting

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 22, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Non Destructive Test Engineer

Technical Expert Engineering, Non-Destructive Testing