Ndt Level Iii - Site Job at Lobellia (Abu Dhabi)

New

Senior QAQC Inspector - Advance NDT

To interpret the suitability of products and processes against the designated sp...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor of Engineering - Mechanical / Metallurgy or Equivalent
NDT certificate in ASNT/PCN Level III for methods in UT, RT, PAUT and TOFD, as minimum
NDT certificate in ASNT/PCN Level II for methods MT and PT, as minimum
CSWIP 3.1 certification and NDT Certificate in ECT, preferred
Minimum 10 years of working experience as NDE personnel for Oil & Gas projects, preferably in LNG (greenfield, brownfield, shutdowns, and live plant environments)
Demonstrated minimum 4-6 years of hands-on experience in advance NDT (PAUT/TOFD) post certification and NDT data interpretation, procedure review, scan plan assessment, and technical validation of contractor inspection outputs
Practical experience in interpretation and acceptance evaluation of weld inspection results against ASME Section V, ASME B31.3, ASME VIII, API 1104, API 5L, project specifications, and approved inspection procedures
Demonstrated understanding of welding processes, weld joint configurations, weld repair scenarios, heat affected zone considerations, common fabrication and service-induced discontinuities, and the impact of welding variables on NDT technique selection and interpretation
Demonstrated ability to assess inspection limitations arising from geometry, restricted access, material condition, and weld profile, coating, cladding, or in-service constraints, and recommend technically suitable inspection approaches
Extensive experience with reviewing/interpretation of PAUT/TOFD, RT Film and witnessing of MT and PT methods

Job Responsibility

Engage with external Contractors to perform PAUT/TOFD and advance NDT techniques and perform defect sizing, characterization
Review and technically assess contractor-issued NDT reports, interpretation records, images, and supporting inspection data to confirm adequacy, traceability, and compliance prior to acceptance
Review and verify NDT procedures, technique sheets, personnel certifications, calibration records, equipment validity, and qualification records prior to commencement of inspection activities
Ensure full traceability between weld maps, line/component identification, NDT reports, repair history, final inspection status, and supporting quality records
Interpret advance NDT data and evaluate indications against the applicable acceptance criteria (ASME, API, Project specs.) and prepare and accurate inspection reports with supporting data/images
Engaging contractors and applicable third-party organizations with a professional approach and maintain a good working level relationship
Review contractors documented quality deliverables in accordance with the requirements and expectations of COMPANY and provide clear, concise output to the applicable quality focal point
Evaluate the suitability of products and processes at key stages against the prescribed specification requirements and is effectively implemented
Ensure NDE traceability of inspected welds and components
Continuously monitor the quality of works in progress at site and at the EPC Contractor fabrication workshop against the applicable NDT Procedure and COMPANY technical specification

Fulltime

Senior QA/QC Inspector (Advance NDT)

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor of Engineering - Mechanical / Metallurgy or Equivalent
NDT certificate in ASNT/PCN Level III for methods in UT, RT, PAUT and TOFD, as minimum
NDT certificate in ASNT/PCN Level II for methods MT and PT, as minimum
Minimum 10 years of working experience as NDE personnel for Oil & Gas projects, preferably in LNG (greenfield, brownfield, shutdowns, and live plant environments)
Demonstrated minimum 4-6 years of hands-on experience in advance NDT (PAUT/TOFD) post certification and NDT data interpretation, procedure review, scan plan assessment, and technical validation of contractor inspection outputs
Practical experience in interpretation and acceptance evaluation of weld inspection results against ASME Section V, ASME B31.3, ASME VIII, API 1104, API 5L, project specifications, and approved inspection procedures
Demonstrated understanding of welding processes, weld joint configurations, weld repair scenarios, heat affected zone considerations, common fabrication and service-induced discontinuities, and the impact of welding variables on NDT technique selection and interpretation
Demonstrated ability to assess inspection limitations arising from geometry, restricted access, material condition, weld profile, coating, cladding, or in-service constraints, and recommend technically suitable inspection approaches
Extensive experience with reviewing/interpretation of PAUT/TOFD, RT Film and witnessing of MT and PT methods
Experience in tube inspection (ECT, IRIS, ACFM), corrosion mapping and inspection of TKY weld joints

Job Responsibility

Interpret the suitability of products and processes against the designated specification requirements at scheduled and ad-hoc intervals
Responsible for advanced NDT technical review, verification of inspection technique suitability, independent assessment of contractor inspection outputs, and support to weld quality decisions during project execution
Review and verify PAUT/TOFD scan plans, scanning coverage, calibration setup, sensitivity, reporting basis, and technique applicability against the governing code, project specification, and inspection scope
Perform technical oversight of PAUT applications on carbon steel welds and dissimilar / clad weld configurations, including verification of scan strategy, beam coverage, calibration approach, and examination limitations associated with clad or weld overlay surfaces
Technically evaluate and validate indication detection, characterization, and sizing results generated through advanced NDT methods and assess compliance against the applicable acceptance criteria and support other NDT techniques
Provides inspection related recommendations on applicable projects activities
Close working relationship with assigned inspection personnel
Coordination with multiple stakeholders while maintaining inspection integrity and independence
Engage with external Contractors to perform PAUT/TOFD and advance NDT techniques and perform defect sizing, characterisation
Review and technically assess contractor-issued NDT reports, interpretation records, images, and supporting inspection data

Fulltime

New

IT Training Lead

The IT Training Lead will drive technology learning and user adoption across the...

Location

United States , Delray Beach

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Experience in IT training, instructional design, technical enablement, or learning and development
Strong knowledge of Microsoft 365
Excellent communication, facilitation, and content development skills
Ability to translate technical concepts into practical, user-friendly training.

Job Responsibility

Design, develop, and deliver IT training programs in instructor-led, virtual, and self-paced formats
Take lead in the Microsoft Copilot and AI training strategy, including onboarding, advanced use cases, responsible AI usage, and ongoing enablement
Partner with IT leadership to support new technology rollouts, system upgrades, and digital transformation initiatives
Create and maintain training content, including videos, guides, tutorials, and job aids
Identify skill gaps and develop targeted learning solutions to improve adoption and productivity
Gather feedback and measure training effectiveness to continuously improve programs.

New

K Kitchen Representative

The position includes, but is not limited to, the following essential job duties...

Location

United States , New Albany

Salary:

Not provided

Circle K

Expiration Date

Until further notice

Requirements

Excellent communication skills
Team player who can work well with others or independently
Acts with integrity
keeps commitments
Contagious positive attitude
Focuses on achieving results while having fun
Frequently bend, twist at waist, kneel, squat, stand, and walk
Occasionally climb and descend ladders
Tolerate extreme cold and hot temperatures and work in and around fryers, ovens, grills, coolers, freezers, sharp objects, and loud noises
Reach, grasp, and manipulate objects with hands for entire shift, including reaching for objects overhead

Job Responsibility

Provides excellent guest service in a fast and friendly manner
Maintains a clean restaurant environment by cleaning and performing general housekeeping duties
Prepares and serves food items in accordance with all Brand, Company, and health department regulations
Ensures product quality, food safety, and operational standards are met
Keeps accurate cash, sales, and inventory control records
Follows all government laws and safety codes
Completes reports on all incidents following our 5-minute rule policy
Lives our Company values: One Team, Do the Right Thing, Takes Ownership, Play to Win

What we offer

Medical, Dental, Vision, Term Life and AD&D plans
Flexible spending and health savings accounts (FT)
Vacation paid time off
Company holidays paid at time and a half
Matching 401(k)
Tuition Reimbursement
Stock Purchase Plan
Employee Discount Program
Discount Meal Benefit
Wellness Plan

New

K Kitchen Representative

Location

United States , Decatur

Salary:

Not provided

Circle K

Expiration Date

Until further notice

Requirements

Excellent communication skills
Team player who can work well with others or independently
Acts with integrity
keeps commitments
Contagious positive attitude
Focuses on achieving results while having fun
Frequently bend, twist at waist, kneel, squat, stand, and walk
Occasionally climb and descend ladders
Tolerate extreme cold and hot temperatures and work in and around fryers, ovens, grills, coolers, freezers, sharp objects, and loud noises
Reach, grasp, and manipulate objects with hands for entire shift, including reaching for objects overhead

Job Responsibility

Provides excellent guest service in a fast and friendly manner
Maintains a clean restaurant environment by cleaning and performing general housekeeping duties
Prepares and serves food items in accordance with all Brand, Company, and health department regulations
Ensures product quality, food safety, and operational standards are met
Keeps accurate cash, sales, and inventory control records
Follows all government laws and safety codes
Completes reports on all incidents following our 5-minute rule policy
Lives our Company values: One Team, Do the Right Thing, Takes Ownership, Play to Win

What we offer

Medical, Dental, Vision, Term Life and AD&D plans
Flexible spending and health savings accounts (FT)
Vacation paid time off
Company holidays paid at time and a half
Matching 401(k)
Tuition Reimbursement
Stock Purchase Plan
Employee Discount Program
Discount Meal Benefit
Wellness Plan

New

Restaurant Assistant Manager

This position assists the Restaurant Manager (RM) with daily operations of the r...

Location

United States , Holly Springs

Salary:

Not provided

Circle K

Expiration Date

Until further notice

Requirements

Full time required
availability during all hours of operation and at least one hour pre-opening and post-closing required
Valid state Driver's License required
Excellent communication skills
Motivates, coaches, and leads team members
Acts with integrity
keeps commitments
Contagious positive attitude
Focuses on achieving results while having fun
Ability to gain control during stressful situations

Job Responsibility

Assists the Restaurant Manager with daily operations of the restaurant and supervises the team in their absence
Leads and coaches Restaurant Team Members and partners with the management team to maintain the Company and Brand operational standards
Provides excellent guest service in a fast and friendly manner
coaches and corrects team
Conducts second interviews for team members and shift leads
Maintains a clean restaurant environment by cleaning and performing general housekeeping duties
Assigns shift duties to team members and follows up to ensure completion
Directs team and ensures all food items are prepared and served in accordance with all Brand, Company, and health department regulations
Coaches team members to follow guidelines for food preparation and production management
Cascades relevant information to team members and assists with new product training

What we offer

Unlimited tip pooling
Medical, Dental, Vision, Term Life and AD&D plans
Flexible spending and health savings accounts
Short-Term Disability
Vacation paid time off
Company holidays paid at time and a half
Matching 401(k)
Tuition Reimbursement
Stock Purchase Plan
Employee Discount Program

Fulltime

New

Plant Operator - Crushing and Screen

Are you an experienced and ticketed Machine Operator looking for stable, high-ho...

Location

Australia , Petrie

Salary:

42.00 - 52.00 AUD / Hour

Randstad

Expiration Date

July 09, 2026

Requirements

Proven Experience working in a quarry, concrete recycling, or heavy industrial yard
Current tickets for Front-End Loader (LL) and Excavator (LE)
Truck License: Heavy Rigid (HR) or higher is highly regarded
Reliability with strong work ethic and punctuality
Own reliable vehicle and current driver's license

Job Responsibility

Safe and efficient operation of heavy machinery in a fast-paced recycling and quarry environment
Operating Front-End Loaders
Operating Excavators utilized as material handlers
Operating Moxy (Articulated Dump Trucks) and other yard machinery as required
Assisting with daily machinery pre-starts, basic maintenance, and ensuring the yard runs smoothly
Adhering strictly to site health and safety protocols

What we offer

Top Rates: $42.00 to $52.00 per hour + overtime penalties
Big Hours: Consistent 40 to 55-hour work weeks
Career Progression: Pathway from casual to permanent full-time employment within 3-6 months
Local Work: Convenient Brisbane Northside location (Petrie)
Immediate Start

Fulltime

Graduate Student Instructors

Location

United States , Ann Arbor

Salary:

Not provided

University of Michigan

Expiration Date

Until further notice

Requirements

Enrolled in good standing as a graduate student at the University of Michigan
Available to teach the scheduled section times
Have previously taken at least 1 philosophy course (or equivalent course) in this general area as an undergraduate or graduate student, and have demonstrated expertise and interest in subject area
Experience with Canvas
If the language of instruction at a student's undergraduate institution was not English, they must be evaluated by the English Language Institute (ELI) for English proficiency and either pass the GSI-OET or have this test waived by the ELI before they can be eligible for a GSI appointment in LS&A.

Job Responsibility

Attend all lectures and exams for your preferred course
Run discussion sections as scheduled
Hold at least 2 office hours each week
Grade assignments, per lead faculty instruction
Meet weekly with the lead instructor, and respond promptly to emails
Additional items listed in fraction calculation form

Parttime

Select Country

Ndt Level Iii - Site

Job Description

Job Responsibility

Requirements

Looking for more opportunities?