Motorized Equipment Technician Job at Alaska Commercial Company (Anchorage)

Biomedical Equipment Technician III

Biomedical Equipment Technician III - Atrium Health Navicent The Medical Center ...

Location

United States , Macon

Salary:

35.50 - 53.25 USD / Hour

Advocate Aurora Health

Expiration Date

Until further notice

Requirements

High School Diploma or GED
A valid driver's license issued by the Division of Motor Vehicles
Five years of experience in preventative maintenance and troubleshooting of biomedical equipment
Basic proficiency in the use of Microsoft Office or similar products (primarily Word and Excel)
Use of personal vehicle for travel to various sites is required/expected
Walks, stands, sits, lifts, bends, and reaches above shoulders throughout the shift
Ability to lift up to 25 lbs. from floor to waist and up to 30 lbs. overhead
and carry up to 40 lbs. at waist height for up to ten feet. Also push with 50 lbs. of force and pull with 40 lbs. of force
Environment can include exposure to dust/dirt, fumes, odors, blood and body fluids
as well as mechanical, electrical, and chemical hazards. As a result, protective clothing must be worn as necessary

Job Responsibility

Troubleshoots, maintains, and repairs (primarily) non-imaging diagnostic and therapeutic medical devices using standard electronic test equipment
Installs, calibrates, and tests new medical electronic devices and systems
Escalates situations or questions beyond their scope of knowledge or responsibility to appropriate staff/vendor resources
Completes assigned tasks on medical electronic devices as per manufacturers' guidelines, relevant codes, standards, and company policies. This includes planned and corrective maintenance, cyber-patching, incoming inspections, recalls, and work related to equipment disposition
Provides operational and technical advice on equipment to medical and clinical staff when needed. Interacts with clinical staff on a regular basis to ensure needs are being met
Acts as a technical resource and mentor for junior Biomedical technicians and Biomedical students (interns)
Documents and maintains accurate records of all inspections, repairs, adjustments, etc., performed on all equipment, for any work performed by self or a vendor. Interacts with manufacturers' representatives to obtain the necessary technical product service information
Assists with projects, as assigned, related to refurbishment, relocation or modification of medical equipment, devices, instruments, and systems
Requests and/or orders necessary repair services and spare parts according to established procedures and contract relationships
Reviews technical literature, service manuals, trade publications and other biomedical service-related documents to stay current with medical equipment related service and regulatory issues

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program
Premium pay such as shift, on call, and more based on a teammate's job
Incentive pay for select positions
Opportunity for annual increases based on performance

Fulltime

Imaging Equipment Technician II - Ultrasound Specialist Women's Care

Performs highly skilled technical and advisory work in the installation, mainten...

Location

United States , Charlotte

Salary:

38.20 - 57.30 USD / Hour

Advocate Health Care

Expiration Date

Until further notice

Requirements

A valid driver’s license issued by the Division of Motor Vehicles
High School Diploma or GED
Typically requires 2 years of experience in biomedical imaging, which includes digital imaging technology, and networking technology
Demonstrated proficiency in the use of Microsoft Office or similar products (primarily Word and Excel)
Demonstrated proficiency and knowledge of networking technology
Demonstrated ability to multi-task several projects
Excellent human relations and communications skills
Valid state driver’s license
Demonstrated leadership ability
Use of personal vehicle for travel to various sites is required/expected

Job Responsibility

Analyzes, troubleshoots and repairs highly complex diagnostic and therapeutic imaging equipment and systems utilizing established electronic test and measurement equipment and techniques
Installs, calibrates and tests highly complex new imaging equipment and/or systems
Performs any required general service on imaging equipment and systems, in accordance with corporate and department procedures, manufacturers recommendations, physicists’ specifications and/or other applicable codes, standards, accreditation requirements, and state and federal regulations as applicable regarding radiographic and diagnostic imaging equipment
Interacts with clinical staff on a regular basis to ensure needs are being met
Provides technical support and assistance to imaging staff in their use of highly complex diagnostic and therapeutic Imaging devices
Acts as a technical resource for Biomedical Technicians and Imaging Technicians to help them grow in ability, responsibility, and experience
Assists in grooming Biomedical Equipment Tech's to provide first call on imaging equipment
Documents and maintains accurate records of all inspections, repairs, adjustments, etc. performed on all equipment performed by self or a vendor
Installs or assists in the installation of new imaging equipment, modifications, tubes, transformers, etc
Assists in the training of imaging staff on the safe and proper use of equipment

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program
Premium pay such as shift, on call, and more based on a teammate's job
Incentive pay for select positions
Opportunity for annual increases based on performance

Fulltime

Fuels Handling Equipment (FHE) Technician

The Fuels Handling Equipment (FHE) Technician provides integrated logistics supp...

Location

United States of America (Guam) , Agana

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
Two (2) to five (5) years of job-related experience
Must be comfortable working in all weather conditions
Must have experience in the installation, operation, inspection, maintenance, and/or repair of fuel delivery systems
Must be physically able to operate a variety of machinery and equipment, trucks, forklifts, fuel pumps, hand tools, etc.
Must be physically able to operate motor vehicles
Ability to read, speak and write English
Must possess basic mathematical skills
Must be able to obtain and maintain a valid driver's license
Must be able to obtain and maintain a Public Trust U.S. Government Clearance

Job Responsibility

Services and functionally tests the following FHE after completion of repairs, prior to releasing for use, or upon return to storage: R-11 Refueling Units
R-18 Pumping Units
R-19 Filter Separators
R-20 Servicing Platforms
R21 Plumbing Assemblies
TASS
PMU-27 Pumping Cart
ABFDS and Non-ABFDS Fuel Bladders
Prepares FHE for storage IAW specific end-item technical data
Performs periodic visual and functional inspections on active storage equipment

Fulltime

Production Equipment Maintenance Technician

The Production Equipment Maintenance Technician supports the production facility...

Location

United States , Fort Lauderdale

Salary:

Not provided

Robert Bosch Sp. z o.o.

Expiration Date

Until further notice

Requirements

7+ years of experience performing equipment maintenance in a manufacturing environment
3+ years of experience with machine drive trains, precision spindles, pneumatic, hydraulic and fluid systems
3+ years of experience in performing troubleshooting and analyzing causes of failures
3+ years of experience in the troubleshooting and repair of production equipment with appropriate controls
3+ years of experience with safety procedures and working with hand tools
2+ years of MS Office experience (Outlook, Excel, etc.)
High School Diploma or GED

Job Responsibility

Troubleshoots machine tools, assembly lines and test stands
Troubleshoot, modify and repair and maintain machinery and mechanical equipment, such as motors, pumps, conveyors, belts, fans, etc
Examines mechanical equipment to diagnose trouble and predict failure
Dissembles machines and repairs or replaces broken parts, pieces and equipment
Adjusts functional parts of mechanical devices as necessary
Cleans and lubricates parts
Initiates request for replacement parts
Examines and repairs controls as required
Diagnosis of electrical problems within machine circuitry
Performs all work in accordance with established safety procedures

Fulltime

Equipment Repair Technician

To maintain the University fleet of vehicles and equipment, in good mechanical a...

Location

United States , Norfolk

Salary:

Not provided

Old Dominion University

Expiration Date

Until further notice

Requirements

Working knowledge of motor vehicle engine operation and repair principles
Considerable skill in the use of hand and power tools and diagnostic test equipment
Demonstrated ability to read and comprehend technical repair manuals
Demonstrated ability to perform simple arithmetic calculations and to read gauges and testing devices
Demonstrated analytical ability to diagnose problems and produce solutions
Demonstrated ability to perform routine repairs within industry standards
Valid driver’s license and insurable driving record
Currently possess or must obtain a State Inspection License
Currently possess or must obtain at least one (1) ASE certification within 90 days of hire
Some training in automotive repair

Job Responsibility

Maintain the University fleet of vehicles and equipment in good mechanical and safe operating condition
Perform preventive maintenance
Perform necessary mechanical repairs

Fulltime

Technician 3, Manufacturing Equipment Maintenance

Technician role responsible for automation equipment capability, maintenance, tr...

Location

Malaysia , Batu Kawan, Penang

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Candidate must possess at least Certificate with 7 years' experience as technician or Diploma in Mechanical/ Electronics/ Mechatronics with 5 years' experience
Familiar with automation equipment (robotics, conveyors, storage systems, sensors, motors, etc.)
Basic understanding of PLC operations (reading I/O status, simple fault isolation)
Knowledge of TPM, 5S, and basic Lean Manufacturing principles
Hands-on skills using tools, measuring instruments, and diagnostic equipment
Ability to handle system alarms, downtime recovery, and escalations
Able to work independently with minimal supervision
Good documentation accuracy (logs, maintenance reports, equipment history)
Ability to lead a shift with good teamwork and collaboration skills
Expertise in using power tools, hand tools, repairing and troubleshoot motor and sensor related errors

Job Responsibility

Responsible for improving and sustaining the automation equipment capability and meet the KPI (Availability, OEE and Yield)
Has capability to lead a shift and become a role model to shift technicians and maintenance assistants
Performing and line troubleshooting and supporting daily production operation
Analyze equipment failure root causes and propose corrective actions
Ability to identify root cause and provide corrective action through use of Effective problem solving tools and write technical incident report
Perform regular inspections to identify equipment root cause
Perform Preventive Maintenance and calibration the equipment to optimal condition
Maintain equipment maintenance documentation and checklist
Propose improvements to enhance equipment performance and reliability
Support equipment setup, relocation and retirement

Fulltime

Field Service Technician

In this position you will maintain and repair a variety of actuated valves and e...

Location

United States , Tulsa

Salary:

Not provided

VanZandt Controls

Expiration Date

Until further notice

Requirements

3-5 years of industrial controls experience
2 year Associates degree in Instrumentation/Electrical controls related field
Ability to install, calibrate and troubleshoot automated control valves
Basic knowledge and understanding in process controls and P&ID control loops
Basic knowledge of pneumatic and hydraulic driven systems
2 years of Industrial Electrical and/or Automation experience
Ability to read and translate electrical drawings and schematics
Electrical troubleshooting with Fluke 787/789 Process meter
Basic knowledge of electrical and control loop circuitry
Basic knowledge of valve design and function

Job Responsibility

maintain and repair a variety of actuated valves and equipment to ensure their safe operation
Check equipment and troubleshoot to identify problem areas
Repair and/or replace electrical equipment, motors and control panels
Make adjustments on all electrical equipment including setting voltage, feedback and checking for proper output
Repair and install control kits
Track time spent on equipment repair and prepare accurate paperwork timely
Check equipment for safe operating features
When necessary and without supervision, accurately order needed parts under Company Policy, including communication with all necessary vendors and suppliers
Responsible for maintaining a safe work environment at all times, understand and comply with all policies
Other duties as assigned

What we offer

health insurance
401(k) with Company match
life and disability insurance
Paid Time Off and Holiday pay

Fulltime

Innovation Technician

The primary purpose of this role is to perform the dynamic combined aspects of p...

Location

United States , Irving

Salary:

Not provided

Rentokil Initial

Expiration Date

Until further notice

Requirements

Clean shaven face- for safety reasons (rebreathers have to be able to seal your face)
High school diploma or GED
related experience and/or training
or equivalent combination of education and experience
Possess a valid driver's license from state of residence
Available to work Monday-Friday and Saturdays as needed
Solid reading, writing, and verbal communication skills and the ability to present information in both internal and external settings
Basic math skills — add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
Licenses/certificates as required by federal, state, and/or local regulations (covered by us)
Customer-facing experience preferred

Job Responsibility

Conduct inspections to identify pest activity, perform pest control services for residential and commercial clients, and install and maintain termite control systems
Efficiently install Thermal Acoustical Pest Control (TAP) insulation, ensuring quality service and customer satisfaction while managing job-site preparations and clean-up
Assist with light construction projects, including minor repairs and replacements related to pest damage
Communicate effectively with customers to explain services, ensure satisfaction, and provide guidance on pest control measures
Perform exclusion services and wildlife removal, setting up and building exclusion traps, and ensuring safety protocols are followed
Stay updated on industry trends, technologies, and regulations
Participate in training to enhance your skills in pest control and related services
Working around animals, insects and termites
Working in tight, confined spaces such as basements, attics, crawl spaces, narrow aisles, or passageways
Setting up and building exclusion traps, cuts flashing and forms hardware cloth to specifications

What we offer

Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more
401(k) retirement plan with company-matching contributions
Vacation days & sick days
Company-paid holidays & floating holidays
A company mindset that prioritizes health, safety, and flexibility
Training and development programs available
Tuition Reimbursement benefits (for FT Colleagues)

Fulltime

Select Country

Motorized Equipment Technician

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?