Mine Controller Job at PLS (Marble Bar)

Planning and Cost Control Manager

Planning and Cost Control Manager position responsible for project planning, sch...

Location

Salary:

Not provided

Mota Engil

Expiration Date

Until further notice

Requirements

Degree in Civil Engineering or a related field
Minimum 8 years of proven work experience with project planning and controls and cost control
Experience working on large international mining projects is a must, preferably open-pit gold mine and in adverse conditions - high altitude and negative temperatures (required)
Advanced knowledge and expertise in engineering, MS Project and Candy-CCS (added value)
Fluency in English, Armenian and/or Russian language (required)
Effective communication skills
Problem analysis and resolution
Client management
Rigor and reliability
Availability for mobility, to work on a rotation schedule in remote locations

Job Responsibility

Responsible for Planning and Scheduling and Controls, cost engineering and control, resources planning and control and management reporting
Coordinates with estimating unit and finance and accounting department in establishing a project chart of accounts of the awarded contract
Preparation of project schedule after contract award
Timely allocation, distribution, and assessment of resources to project in accordance with requirements
Monitors and evaluate project cost and resources performance on a weekly and monthly basis and prepare executive summary reports to top management
Prepares project operational budget based on work breakdown structures, showing each cost element (labour, material and equipment) and assigning cost, centres and codes covering indirect and direct cost distribution
Prompt monitoring and reporting project manpower census, movements, and utilization
Periodic analysis of project resources requirements project against available resources to be able to initiate the company sourcing arrangements with project management
Analysing cost and revenue, and organising cost control progress reports on the project
Monitoring, reporting, and forecasting project plans

Mine Controller

We are currently seeking a Mine Controller at our Coppabella Moorvale Joint Vent...

Location

Australia , Moranbah

Salary:

Not provided

Peabody Energy

Expiration Date

Until further notice

Requirements

Generic Coal (Surface) Induction (S11)
Experience with emergency response protocols and incident management
Minimum 2 years’ experience in open cut mining operations and safety procedures
Proven ability to work both autonomously and as part of a team
Strong multitasking skills with excellent communication
Familiarity with mine control systems (MineOPs, Modular, MineStar, Wenco)
Intermediate computer skills and a genuine interest in technology and innovation

Job Responsibility

Operate and monitor real-time systems (FMS Hexagon MineOPs, SCADA, GroundProbe)
Oversee production activities across excavators, trucks (load and haul cycles), and dozers
Monitor equipment health and respond swiftly to alerts or faults
Support incident response and follow emergency protocols
Collaborate with Production, Maintenance, Tech Services, and CHPP teams
Manage shift handovers, set priorities, and maintain clear communication
Build strong working relationships with Supervisors and Production Coordinators
Record and report production data, equipment usage, and downtime
Produce accurate shift and performance reports
Maintain and update mine control systems with critical data

What we offer

Modern camp facilities including meals, gym, and recreation

Fulltime

Ccms Coordinator

We are seeking an experienced CCMS Coordinator to join our team on the Hope Down...

Location

Australia , Newman

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum 5 years’ experience in the administration and coordination of CCMS systems in a FIFO capacity
Demonstrated competency with office computer software packages, computer systems, and databases
Proven experience supporting CCMS processes and completions teams
Strong understanding of procedural and governance requirements for CCMS systems
Ability to work in a high-paced site environment and manage multiple priorities

Job Responsibility

Administer and coordinate the CCMS system in line with project governance requirements
Oversee and facilitate on-site CCMS and handover activities
Support completions teams and CCMS processes
Create, assist, or validate plans and procedures
streamline and improve work processes
Provide coordination, support, and governance for punch listing processes
Validate work packs and test packs for shutdowns and tie-ins

Senior Mine Geologist

Reporting to the Geology Superintendent, the Senior Mine Geologist will be accou...

Location

Australia , Port Hedland

Salary:

Not provided

PLS

Expiration Date

Until further notice

Requirements

Degree in Geology
Current Competency - Providing First Aid
7-10 yrs. experience in a similar role managing and geology team
Experience in pegmatite deposits
Surpac and spatial data modeling software

Job Responsibility

Co-ordinate the design, scheduling and implementation of RC grade control drilling programs for the life of mine and short-term requirements
Set up and maintenance of the grade control, assay, quality control, and mineral resource reconciliation systems, and the daily, weekly and monthly reporting systems
Develop and initiate geological mapping systems in the mine areas
Continuously improving the grade control model through timely grade control drilling, geological inputs, interpretation and reconciliation
Manage resource model reconciliation and grade control model
Manage all information related to the resource, ensuring assays composites and densities related information is accurate and validated
Liaising with the drilling and blasting contractors and Mine Production Engineers
Participation in daily mine planning and meetings
Manage and validate the timely and accurate collection of geological information to contribute to mine planning and optimize the mining resource
Develop ore and waste mark out system

What we offer

18 weeks parental leave for primary carers and 4 weeks for secondary carers
Flexible working arrangements including an option to work from home
Health and wellbeing allowance
Annual / quarterly short-term incentive bonus that recognises individual and business performance
Novated leasing through salary sacrifice
Newly refurbished facilities at Pilgangoora including gym, tennis and squash courts, sports oval, and scenic walking tracks
Paid community leave
Monthly employee recognition awards
Access to PLS’ KidsCo School Holiday Program

Fulltime

Sr. Cost Controller

We are seeking an experienced Cost Control professional for a well established o...

Location

Canada , Vancouver; Cariboo region

Salary:

130000.00 - 160000.00 CAD / Year

Randstad

Expiration Date

April 19, 2026

Requirements

Bachelor’s degree in finance, engineering, business, project management or equivalent
Minimum 7 years of cost control experience in mining, construction, energy, or major infrastructure project
Proficient in Excel and Project Control software
Knowledge of estimation software is considered an asset
Be able to communicate in French and/or English (nice to have)
Certifications such as CCP (Certified Cost Professional), CMA, or PMP are considered assets
Able to drive alignment, resolve disagreements and improve team performance without direct authority over his collaborators
Strong communication skills and ability to manage sensitive conversations
Ability to work well in a team environment
Highly organized and self-directed, able to manage tasks independently and efficiently

Job Responsibility

Collaborate with project and functional leaders to develop accurate cost estimates that enable effective budget financial control
Prepare and deliver regular cost reports (weekly, monthly, quarterly), tailored to diverse audiences, and communicate key findings promptly with clarity and precision
Lead change control sessions, evaluate the financial impact of scope changes, and assess mitigation strategies to support effective decision-making
Build effective cross-functional relationships across departments (engineering, procurement, construction and management) and serve as a composed, assertive presence in high-pressure scenarios. Maintain close interaction with project and construction managers and act as a trusted advisor, by using diplomacy to challenge assumptions and supporting the resolution of cost-related changes
Perform continuous cost trend analysis and oversee the validation and approval of invoices, purchase orders, and cost allocations to ensure an accurate and real-time cost tracking system
Continuously monitor project execution by evaluating performance against the approved budget, identifying significant variances, and initiating corrective actions as needed
Perform detailed cost analyses to identify savings opportunities, optimize resource allocation, and support strategies that enhance project efficiency and reduce expenses
Review project performance and variables to anticipate risks, refine forecasts, and implement proactive measures that contribute to project stability
Guide junior team members and influence peers to foster a culture of cost discipline and accountability

What we offer

Paid time off
Extended Health, Dental, Vision Care
Disability Insurance
Life Insurance
Employee Share Purchase Plan

Fulltime

Senior Control Systems Engineer

Reporting to the Lead Design OT Technology as part of the Studies and Engineerin...

Location

Australia , Perth

Salary:

Not provided

PLS

Expiration Date

Until further notice

Requirements

Experienced Control Systems Engineer with a background in mining or heavy industry
Strong knowledge of PLCs (Allen‑Bradley, Schneider Modicon, SEL RTAC) and SCADA platforms (Ignition, AVEVA)
Skilled in developing and reviewing control philosophies, functional specs and FAT/SAT documentation
Solid understanding of industrial communication protocols such as OPC UA, Modbus TCP/IP, EtherNet/IP and IEC 61850
Strong communicator who can collaborate across engineering, operations and vendor teams
Able to manage multiple priorities with high attention to detail
Willing to travel to site for shutdowns, commissioning and technical support as required

Job Responsibility

Provide technical leadership across control systems and OT projects, from concept through to commissioning
Review and develop control philosophies, functional design specs, drawings, and FAT/SAT documentation to ensure high‑quality project delivery
Support onsite commissioning, troubleshooting and shutdown activities, ensuring systems meet performance and safety standards
Partner with engineering, operations and vendors to resolve technical issues and deliver integrated project outcomes
Contribute to OT governance by maintaining standards, specifications and reviewing system modifications through the Management of Change process
Drive continuous improvement by supporting plant optimisation, system upgrades and technology enhancements

What we offer

18 weeks parental leave for primary carers and 4 weeks for secondary carers
Flexible working arrangements including an option to work from home
Health and wellbeing allowance
Annual short-term incentive bonus that recognises individual and business performance
PLS employee share scheme
Novated leasing through salary sacrifice
Newly refurbished facilities at Pilgangoora including gym, tennis, pickleball and volleyball courts, sports oval, and scenic walking tracks
Paid community leave
Monthly employee recognition awards
Access to PLS’ KidsCo School Holiday Program

Fulltime

Technologist, Construction Quality Control

Our client, a major Oil and Gas client, is looking for a QA Technologist to work...

Location

Canada , Fort McMurray

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum 1 year of experience in construction quality control, preferably working on oil sand mine earth structures
A technical diploma in a field related to mining (Civil Engineering, Construction Engineering, Geological Engineering, Geomatics Engineering, etc.) and able to receive accreditation with ASET as a C.Tech. or C.E.T.
Must possess a valid class 5 Drivers' License with limited to no demerits
Must be able to carry 50 lbs 100 m over rough terrain continuously

Job Responsibility

Maintain effective communication with stakeholders including Mine Operations, Geotechnical Engineering, and Mine Engineering
Implement Issued for Construction (IFC) drawings, Quality Management System, and Safe Operating Procedures
Complete daily visual inspections of material borrow sources and mine earth structures to support construction activities. Perform in situ soil density testing with a nuclear densometer as per IFC drawings
Compile daily construction reports and upload at the end of each shift in construction database. Document construction activities, in situ test results, and non-conformances in construction database

What we offer

Company Sponsored Fly-In/Fly-Out and Accommodations Program with charter flights from Calgary or Edmonton, or need to relocate to Fort McMurray to take advantage of Company Sponsored bussing
Competitive salary and the opportunity to gain valuable, hands on experience in the Oil & Gas industry
Company culture that fosters a fun working environment, developing meaningful relationships, and continuous learning

Fulltime

Automation & Control Software Engineer

We are seeking a proactive Software Engineer to join our dynamic Software team. ...

Location

Australia , Kewdale, Western Australia

Salary:

Not provided

Remote Control Technologies Pty Ltd

Expiration Date

Until further notice

Requirements

Degree in Software Engineering, Mechatronics, Computer Science, or a related field
3+ years of experience in software development, preferably in automation or control systems
Proficiency in C++ and/or Python
Experience with real-time systems and embedded development
Familiarity with Linux environments and tools (e.g., bash, ssh)
Understanding of communication protocols (TCP/IP, CAN, Ethernet)
Exposure to sensing technologies (e.g., LIDAR, machine vision) and GNSS/GPS

Job Responsibility

Design, develop, and maintain automation and control software for mining equipment
Participate in the full software development lifecycle: requirements gathering, design, implementation, testing, deployment, and support
Integrate software with hardware systems including sensors, controllers, and communication modules
Collaborate with cross-functional teams including hardware, systems, and field service engineers
Conduct testing using simulated and physical environments (e.g. autonomous vehicles, LIDAR, GNSS)
Document software designs, test procedures, and user manuals
Support continuous improvement of existing systems and contribute to next-generation product development

What we offer

Work on cutting-edge mining automation technologies
Be part of a global leader in smart technology solutions
Flexible working arrangements and a supportive team environment
Opportunities for career growth and professional development

Mine Controller

PLS

Location:
Australia , Marble Bar

Category:
-

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Mine Controller

Planning and Cost Control Manager

Mine Controller

Ccms Coordinator

Senior Mine Geologist

Sr. Cost Controller

Senior Control Systems Engineer

Technologist, Construction Quality Control

Automation & Control Software Engineer

Mine Controller

PLS

Location:Australia , Marble Bar

Category:-

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Mine Controller

Planning and Cost Control Manager

Mine Controller

Ccms Coordinator

Senior Mine Geologist

Sr. Cost Controller

Senior Control Systems Engineer

Technologist, Construction Quality Control

Automation & Control Software Engineer

Location:
Australia , Marble Bar

Category:
-

Contract Type:
Not provided

Job Posted:
March 19, 2026