Metering Electrician Job at Green Energy Advice Bureau (Sunderland)

Control Systems Software Designer

As a member of a highly motivated, multidisciplinary team, you will design and d...

Location

Canada , Woodbridge

Salary:

36.54 - 54.81 USD / Hour

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

A post-secondary degree specializing in Mechatronics, Systems, Electrical or Computer Engineering
3 years of experience programming Programmable Logic Controllers (PLC), and Human/Machine Interfaces (HMI) using Allen Bradley (Rockwell Studio 5000 Logix Designer) or Siemens (TIA Portal) software
3 years of experience in a hands-on automation/controls environment working on Supervisory Control and Data Acquisition (SCADA) and Manufacturing Execution Systems (MES) systems
Proficiency in understanding programs written in structured test (i.e. Visual Basic, C#, Python, languages). Strong programming, mechanical and electrical problem-solving skills
Experience with configuration/troubleshooting of instrumentation (power supplies, meters, sensors, safety switches, etc.) using vendor software and interfaces
Experience working in Just-In-Time environments and on mission critical systems
Ability to communicate effectively, both orally and in writing
Understanding of robotics, control systems and machine operation with hands-on experience is required
A self-starter with the ability to work as part of a team in a fast-paced environment with minimal supervision

Job Responsibility

Design and develop software programs (PLC and/or PC based) specific to customer and project requirements based on standard ATS programming methods (ATS Global Code Standard)
In depth programming in environments mainly using PLC Ladder logic (Rockwell / Siemens platforms), and structured test (i.e. shell scripting, Visual Basic, C#, Python)
Ability to reverse-engineer and write PLC code from scratch
Select, test and integrate hardware and software components such as robots, I/O, analog devices, motion controllers, sensors, vision systems and lasers
Debug and commission control systems at our facility, during the system integration stage and then at the customer's site during installation. Travel to both domestic and international customer locations for SAT (up to 20% travel per year)
Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality and reduced cost
Work with customers, project managers, designers, toolmakers and electricians to solve problems to provide the customer with a complete, functional automation system
Provide thorough testing of machine functionality to verify software program completeness
Provide accurate documentation for each project and training specific to their current project (i.e. machine operation, programming principles and program structure)
Improve the knowledge and capability of other members of the department through mentoring. Responsible for meeting Team Member level KPIs as assigned. (Budget, Schedule, Quality, CI)

What we offer

Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly snack day, etc.)
Employee Development Programs
Overtime pay
RSP matching
Employee Referral Bonuses
Educational Reimbursement Program

Fulltime

New

Electrician

The Electrician executes projects and work orders by installing, maintaining, te...

Location

United States of America , Detroit

Salary:

43.11 USD / Hour

Aramark

Expiration Date

Until further notice

Requirements

1-3 years’ experience in a process driven electrical maintenance position required
Must have the ability to read drawings and blueprints and interpret specifications
Must have the ability to understand and apply industry standards for installation, repairs, and safety
Demonstrates interpersonal and communication skills, both written and verbal
Journeyman Card

Job Responsibility

The Electrician executes the timely and correct performance of scheduled assignments, work requests and projects
Maintains a friendly, efficient, and positive customer service attitude toward customers, clients, and co-workers
Anticipates and responds to customer needs
Reads and interprets drawings, blueprints, schematics, and electrical code specifications to determine correct layout and troubleshoot industrial electrical equipment installations
Installs, examines, replaces, or repairs electrical wiring, receptacles, switch boxes, conduits, feeders, Ethernet and coaxial cable assemblies, lighting fixtures and other electrical components
Tests electrical and electronic equipment and components for continuity, current, voltage and resistance
Maintains, repairs, installs and tests switchgear, transformers, switchboard meters, regulators, and reactors
Conducts preventive maintenance programs and keeps maintenance records
May install, maintain and calibrate industrial instrumentation and related devices
Researches and specifies repair parts from manuals and computer sources

What we offer

Eligible the first of the month following 60-days of employment
NO Premium cost for Medical |Dental |Vision
401(k)
Employee Assistance Program
Attendance & Holiday Bonus
Life Insurance
Short-Term | Long-Term Disability
Aramark & General Motors Discounts

Fulltime

Energy Systems Technician

Position Purpose: Under general supervision from the Metering Supervisor or othe...

Location

United States , Boston

Salary:

28.86 - 33.65 USD / Hour

Veolia

Expiration Date

Until further notice

Requirements

An associate's or Bachelor's Degree in electronics, computer technician, or instrumentation is strongly preferred
At least two years of related field work experience or any equivalent combination of education and work experience
Demonstrates knowledge of programming, testing, troubleshooting, and calibration of electronic and mechanical meters
Strong PC skills as well as demonstrated skills in reading sub-meter drawings, diagrams, and wiring layouts
Proven proficiency in Visio and AutoCAD
Ability to work collaboratively with customers and vendors, communicate effectively both verbally and in writing
Reliable team player
An organized self-starter, able to follow standard procedures, prioritize assignments, and address problems as they arise or seek appropriate help
The employee will need to lift and/or move up to 50 pounds
Valid state-issued driver's license

Job Responsibility

Respond to service orders concerning customers, including equipment change-outs, device commissioning, and system troubleshooting
Use specific software to commission/program electronic/thermal/water meters, and remote data collection hardware, and complete all relevant paperwork associated with the assignment
Coordinate electrician presence onsite and execute project micro-management upon completion-follow up on any new opportunities
Communicate with customers, contractors, and co-workers, and respond to inquiries in a timely fashion
Perform other duties as required including occasional drawing reviews/updates, tenant surveys, and occasional meter reading
Partake in department workflow, stay aware of ongoing projects, and assist when necessary
Other duties as assigned

What we offer

Paid time off policies
Health insurance
Dental insurance
Vision insurance
Life insurance
Savings accounts
Tuition reimbursement
Paid volunteering
Employer sponsored 401(k) plan

Fulltime

Event Power Distribution Technician

The Power Distribution Technician is responsible for safe and effective power di...

Location

Canada , Brampton

Salary:

19.00 - 24.00 USD / Hour

Encore Global

Expiration Date

Until further notice

Requirements

High School Diploma is required
2+ years of customer service or hospitality experience is preferred
2+ years of audio-visual experience is preferred
1+ years of working with Power Distribution Equipment
Preferred certification or ability to attain certification (ETCP PPDT, BC. LPEC, Ont. 269E, or equivalent)
A valid driver's license is required for team members in positions that may operate Company Vehicle

Job Responsibility

Review and plan Power Distribution execution based on event power orders, exhibitor order forms, floor plans and exhibitor booth diagrams/blueprints
Create and execute show load-in/ load-out plans for both Production events (Encore or 3rd Party) and exhibits/tradeshows
Collaborate with project manager and operations teams as a technical expert for power distribution
Safe, timely and accurate setup, operation, and breakdown of required power distribution for general sessions, breakouts, computer labs, meal functions, entertainment events, exhibitors, decorators, and productions
Build custom cables and assist in the fabrication of electrical components, as needed and as allowed based on local regulations and individual qualifications
Troubleshoot and solve power issues when they occur, working closely with Encore operations team and venue engineering
Assist in the cross training of AV Technicians and as a lead (small team of 2-3 technicians) in the area of power distribution
Provide excellent service and strive to exceed the expectations and needs of internal and external customers
Maintain a positive relationship with all clients through effective communication
Meet with guests on site to ensure that their needs are met and the electrical setup is working properly

Fulltime

Meter Service Electrician

Looking for an electrician role focused on electrical metering and supporting so...

Location

United States , Charlotte

Salary:

35.00 - 55.00 USD / Hour

Beacon Hill

Expiration Date

Until further notice

Requirements

4+ years of journeyman-level commercial or industrial electrical experience
Licensed or certified electrician (required)
Proficient with Microsoft Office tools (Excel, Word, Visio)
Strong written and verbal communication skills
Detail-oriented and able to work independently
Physically able to work in electrical rooms and lift light equipment
Willing to work occasional off-hours and travel (25-50%)
Demonstrates professionalism and strong ethical standards.

Job Responsibility

Use electrical test equipment to verify voltage, continuity, and power quality
Troubleshoot electrical power systems and device communications (Ethernet, RS‑485, Serial)
Support customer service contracts for Power Monitoring Expert (PME) systems
Perform on-site service visits, system checks, and customer support
Generate electrical power monitoring and power quality reports
Install, configure, and maintain power monitoring hardware and software (Level III & Senior)
Configure and manage EPMS diagrams, screens, and system layouts
Install and replace electrical meters, CTs, PTs, fuses, gateways, wiring, and conduit
Configure meters and gateways, including communication and device settings
Troubleshoot Modbus TCP, serial gateways, and device communications using Modscan

Fulltime

O&M Technician I

Position Purpose: Provides day-to-day monitoring and basic plant and pump/booste...

Location

United States , Spencer

Salary:

Not provided

Veolia

Expiration Date

Until further notice

Requirements

High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions
Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals
Experience using material handling equipment, pressure gauges and precision measuring instruments
Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred
Ability to perform basic mathematical calculations
Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment
Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action
Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC
Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals
Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily

Job Responsibility

Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures
Monitors and observes operating conditions, records observations and data in shift log
Diagnoses basic operational problems and takes corrective action per procedure
Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses
Reports and documents results of work performed and enters into appropriate database
Promptly reports any operational problems with machines or equipment to Lead or Supervisor
Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule
Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units
Prepares chemical solutions, monitors supplies and recommends reorder
Performs routine lab tests and prepares reports per procedure

What we offer

Paid time off policies
Health insurance
Dental insurance
Vision insurance
Life insurance
Savings accounts
Tuition reimbursement
Paid volunteering
Employer sponsored 401(k) plan

Fulltime

O&M Technician I

Position Purpose: Provides day-to-day monitoring and basic plant and pump/booste...

Location

United States , Burkburnett

Salary:

Not provided

Veolia

Expiration Date

Until further notice

Requirements

High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions
Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals
Experience using material handling equipment, pressure gauges and precision measuring instruments
Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred
Ability to perform basic mathematical calculations
Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment
Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action
Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC
Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals
Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily

Job Responsibility

Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures
Monitors and observes operating conditions, records observations and data in shift log
Diagnoses basic operational problems and takes corrective action per procedure
Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses
Reports and documents results of work performed and enters into appropriate database
Promptly reports any operational problems with machines or equipment to Lead or Supervisor
Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule
Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units
Prepares chemical solutions, monitors supplies and recommends reorder
Performs routine lab tests and prepares reports per procedure

What we offer

paid time off policies
health insurance
dental insurance
vision insurance
life insurance
savings accounts
tuition reimbursement
paid volunteering
employer sponsored 401(k) plan

Fulltime

Electrician

Canfor is a highly Automated Sawmill. The Technician is responsible for the day-...

Location

United States , Moultrie

Salary:

Not provided

Canfor

Expiration Date

Until further notice

Requirements

Minimum of 3 years of experience as an industrial electrician, preferably in a sawmill or similar setting
Strong knowledge of electrical systems, blueprints, and schematics
Excellent troubleshooting skills
Self-motivated/ Self Starter
Ability to work in a physically demanding environment, including standing for long periods, lifting heavy objects, and working in various weather conditions
Excellent communication and interpersonal skills
Experience working in a manufacturing and/or industrial environment would be considered a plus
Knowledge of the lumber manufacturing process would be an asset
A commitment to safety and the ability to follow strict safety protocols
Ability to work effectively in a team, collaborating with other electricians, operations, production staff, and supervisors

Job Responsibility

The ability to diagnose and troubleshoot electrical malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem. To include VOM, Amp Probe, Process control Meter, Theral Imaging, Basic hand/ Conduit tools
Troubleshoot PLCs, modify or create programs
Troubleshoot up to the IO Cards to determine proper field devices functioning
Conducts inspections and replaces or repairs non-operational equipment and/or components of equipment that are hindering the equipment from operating efficiently
Must have a comprehensive understanding and knowledge of electrical principles and adequate skills to understand various mill processes
Positive working attitude toward other employees
be a team player
Work with others constructively and abide by company policies and procedures
Must complete PMs on time and ensure proper documentation is filled out
Will assist line mechanics and Production as necessary when needed to support production including all the above-mentioned tasks and other means of support as needed

What we offer

competitive compensation
industry-leading benefits

Fulltime

Select Country

Metering Electrician

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?