CrawlJobs Logo

Metal inspector

https://www.randstad.com Logo

Randstad

Location Icon

Location:
Canada , Surrey

Category Icon
Category:

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

23.00 CAD / Hour

Job Description:

Great opportunity in Surrey BC, we are currently looking for a Ground Inspector/ Metal Inspector to work in a busy automotive yard. The Grounds Inspector plays a key role in daily yard operations by inspecting incoming customer loads, directing them to the appropriate unloading areas, and maintaining clear communication across the facility via radio. This position helps ensure safe, efficient, and organized material handling throughout the yard. This position is best suited if you enjoy a shipping and receiving area, understands metals, mechanics and takes pride in quality control than this is the perfect fit. The ideal candidate for this position is someone who enjoys hands-on, physical work in a fast-paced outdoor environment and takes pride in maintaining quality and operational efficiency.

Job Responsibility:

  • Report problems and communicate throughout the facility via radio
  • General yard clean up and repairs
  • Greet customers
  • Inspect customer loads and directing them to the proper location in the yard to unload
  • Basic sorting of scrap material and quality inspection
  • Grading of material and deductions
  • Doing basic quality assurance of materials
  • Accurately recording of production data
  • Climbing up truck ladders to inspect load
  • Participating in safety, quality and environmental inspections

Requirements:

  • A strong work ethic with the ability to focus and complete tasks independently
  • Comfortable performing physically demanding work in varying weather conditions
  • Excellent attention to detail with a commitment to safety and quality
  • Ability to communicate effectively with team members and customers
  • You can meet the schedule and shift time: Monday to Saturday
  • High School diploma, GED Certification, or equivalent experience in a similar role preferred
  • Min of 1+ years of experience working in a yard or automotive garage environment
  • Mechanically inclined/experience using hand/power tools
  • Attention to detail and ability to follow instructions
  • You are comfortable working in a covered outdoor environment in all types of weather
  • No physical limitations and ability to lift up to 55 lbs, and stand/walk for 8 hour shift
  • Good attitude and can work well with no supervision and with the team
  • You have High Ankle Steel Toe Boots with Toe Cover (metatarsal protector)
  • Located in Surrey, BC
  • Vehicle is preferred for this role
  • You are legally permitted to work full-time in British Columbia

Nice to have:

Previous experience in scrap metal, construction, or industrial yard work is an asset but not required

What we offer:
  • Pay Rate: $23/H
  • Located in Surrey (Close to Scott Road Station)
  • Weekly Pay (Direct Deposits)
  • Minimum 40 hours a week and opportunities for overtime
  • 4% Vacation Pay added to every pay
  • Extensive training
  • Opportunities for growth
  • Team working environment
  • Free Parking on site

Additional Information:

Job Posted:
March 11, 2026

Expiration:
May 01, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Metal inspector

Quality Inspector - Aerostructures

Location
Location
United States , Wichita
Salary
Salary:
Not provided
sqaservices.com Logo
SQA Services
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience with aerostructures / aircraft sheet metal
  • Experience in aerospace manufacturing
  • Fulltime
Read More
Arrow Right

Quality Control Inspector

Responsible for performing inspection, testing, and verification of raw material...
Location
Location
United States , Henderson
Salary
Salary:
Not provided
asc-es.com Logo
ASC Engineered Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or GED
  • Prior manufacturing experience (preferably in metal stamping or related field)
  • Ability to read and interpret blueprints and technical drawings
  • Proficient with measurement tools and inspection techniques
  • Strong written and verbal communication skills
  • Basic computer skills (Excel, data entry, QMS software, etc.)
Job Responsibility
Job Responsibility
  • Perform inspections using appropriate measuring tools (e.g., calipers, micrometers, gauges, templates, visual standards)
  • Conduct first piece, in-process, and final inspections per quality procedures and control plans
  • Read and interpret blueprints, technical drawings, and customer specifications
  • Document inspection results and maintain accurate records in quality systems, forms, or databases
  • Identify, report, and quarantine non-conforming material
  • assist with root-cause analysis and corrective actions
  • Verify compliance with customer and internal quality requirements
  • Communicate quality concerns to production, engineering, and leadership
  • Assist with calibration of inspection equipment and ensure proper use
  • Follow all safety requirements and promote a safe working environment
  • Fulltime
Read More
Arrow Right

Quality Inspector - Operations

Join our team as an Aircraft Inspector Level B, where you'll perform detailed in...
Location
Location
United States , Wichita
Salary
Salary:
23.66 - 39.32 USD / Hour
boeing.com Logo
Boeing
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must be able to work any shift
  • Minimum 2 years aircraft or mechanical experience
  • Must be able to read blueprints
  • Proficient in basic computer operations
  • All Candidates must pass the WorkKeys Assessment (workkeys.com) or provide verification that they have passed the WorkKeys Assessment
  • Must be able to present two (2) forms of identification for WorkKeys Assessment
  • Must meet export control compliance requirements
  • Must be a U.S. Person as defined by 22 C.F.R. §120.15 (U.S. Citizen, lawful permanent resident, refugee, or asylee)
Job Responsibility
Job Responsibility
  • Perform detailed inspections on aircraft components using precision tools and technical documentation
  • Ensure compliance with quality standards
  • Maintain required certifications
  • Collaborate across departments to support production and safety goals
  • Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment
  • Contact other company organizations or customer representatives, as required to coordinate and accomplish work assignments
  • Operate testing machines, calculate and record results
  • Plan own sequence of operations
  • Follow Inspection (shop) procedures to accept or reject processes/parts/assemblies
  • Verify that tools are qualified
What we offer
What we offer
  • Generous company match to your 401(k)
  • Industry-leading tuition assistance program pays your institution directly
  • Fertility, adoption, and surrogacy benefits
  • Up to $10,000 gift match when you support your favorite nonprofit organizations
  • Eligible for a $5,000 state of Kansas Aviation tax credit for up to five years
  • Fulltime
Read More
Arrow Right

Senior Quality Inspector

This is a hands-on role that would suit someone with a background in quality con...
Location
Location
United Kingdom , Staplehurst, Kent
Salary
Salary:
Not provided
magneticshields.co.uk Logo
Magnetic Shields Ltd
Expiration Date
March 31, 2026
Flip Icon
Requirements
Requirements
  • Minimum 5+ years relevant experience from a transferable ISO9001 environment
  • Experience of fine limit sheet metal inspection
  • Proven experience in a senior or lead quality inspection role within a manufacturing or precision engineering environment
  • Strong hands-on experience with CMM operation and programming
  • In-depth understanding of ISO 9001 quality management systems
  • Ability to read and interpret complex engineering drawings and GD&T
  • High level of attention to detail with a methodical, analytical approach
  • Confident communicator able to work cross-functionally
Job Responsibility
Job Responsibility
  • Carry out detailed inspection to customer specifications and drawings of precision sheet metal components and assemblies using a range of measurement equipment
  • Program, operate, and interpret results from Coordinate Measuring Machines (CMM) to verify dimensional compliance
  • Perform first article inspection (FAI)
  • Accurately interpret engineering drawings, GD&T, and technical specifications
  • Ensure inspection activities comply with ISO 9001 requirements and MSL quality procedures
  • Support internal and external audits by providing inspection records, evidence, and technical input
  • Identify non-conformances, raise NCRs, and support root cause analysis and corrective actions with quality engineers
  • Maintain accurate and traceable quality records and inspection reports
  • Provide technical guidance and mentoring to Quality Inspectors and production staff where required
  • Contribute to continuous improvement initiatives aimed at reducing defects, improving inspection efficiency, and strengthening quality controls
What we offer
What we offer
  • Competitive pay
  • Benenden health cover
  • Competitive holiday entitlement
  • Quarterly performance bonuses
  • Comprehensive company sick pay
  • Enhanced pension contributions
  • Cycle-to-work scheme
  • Exclusive discounts portal
  • Double death-in-service cover
  • On-site Mental Health First Aiders
  • Fulltime
Read More
Arrow Right

CWI NDT II Weld Inspector

We are looking for skilled and organized Process Pipe QARs (CWI or NDT Level II ...
Location
Location
Salary
Salary:
Not provided
amts.com Logo
AM Technical Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must have a thorough understanding of acceptable industry standards for quality relative to all plastic, metal and/or hybrid piping materials likely to be used in microelectronics/high-tech industrial construction
  • Must have be a CWI or NDT Level II Technician
  • ASME B31.3 compliant weld certificate in one or more of the following methods
  • SMAW, GTAW, GMAW
  • ASME B31.3 compliant weld certificate (automatic orbital welding for high-purity gas systems)
  • Certified by George Fischer on one or more of the following PVDF fusion processes
  • GF Model IR 63
  • GF Model IR225
  • Be certified by a PVC/CPVC manufacturer in the fabrication of solvent cemented joints, the installation of valves, the assembly of mechanical (threaded) connections, and other piping system components
Job Responsibility
Job Responsibility
  • Responsible for writing, interpreting, and maintaining installation guidelines and situational bulletins and memos with compliance to existing contract guidelines
  • Content expert in piping construction and be able to deliver a message of expectations such that interpretation is not left to chance
Read More
Arrow Right

Crew Chief

The Crew Chief (CC) position primarily functions as a mechanic on aircraft for a...
Location
Location
United States
Salary
Salary:
Not provided
aevex.com Logo
AEVEX Aerospace
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must possess an active DoD Secret Security Clearance, or higher
  • Must meet all DoD Contractor deployment requirements and pass Combat Readiness Course
  • Must have excellent verbal, written communication, and organizational skills
  • Must pass a pre-employment background check
  • Must have a High School Diploma/GED or equivalent
  • Must be a US citizen with a valid US passport
  • Must possess current FAA Class II Medical Certificate
  • Minimum 2-4 years of relative experience and knowledge of Aviation Maintenance
  • UAS Maintenance Experience (Group 2+) 2+ years
  • OCONUS deployment experience is a must
Job Responsibility
Job Responsibility
  • Execute all maintenance actions to support on-time delivery of service
  • Create flight schedules and track aircraft specific information
  • Interpret technical data from blueprints and engineering specifications
  • Conduct aircraft ground fueling and weight and balance
  • Manage and execute aircraft and engine maintenance
  • Ensure accurate documentation of aircraft maintenance records
  • Complete aircraft and engine maintenance as required
  • Follow established aviation safety procedures
  • Conduct scheduled inspections and complete follow-up
  • Inspect engines, landing gear, instruments, brakes, valves, and other aircraft systems
What we offer
What we offer
  • 401(k)-retirement plan
  • Comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of premiums paid by the company
  • Professional development funds
  • Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support
  • Fulltime
Read More
Arrow Right

Quality Inspector

This hands-on role is ideal for professionals with a background in quality contr...
Location
Location
United Kingdom , Staplehurst, Kent
Salary
Salary:
Not provided
magneticshields.co.uk Logo
Magnetic Shields Ltd
Expiration Date
March 31, 2026
Flip Icon
Requirements
Requirements
  • Minimum of 2 years of experience in a quality inspection role OR a relevant engineering/quality qualification
  • Experience using manual measuring techniques, including vernier, callipers & micrometers
  • Experience of CMM measurements
  • Experience of fine limit sheet metal inspection
  • Experience of raising non-conformance reports
  • Experience of FAI & report writing
  • A thorough understanding of reading engineering drawings, projections and tolerances
  • Experience of working within a quality management standard (minimum to ISO 9001)
  • Excellent communication skills, with the ability to collaborate effectively across teams
  • Strong organisational skills with an attention to detail and a focused approach to work
Job Responsibility
Job Responsibility
  • Carry out detailed inspection to customer specifications and drawings of precision sheet metal components and assemblies using a range of measurement equipment, including CMMs, height gauges, micrometers, verniers, and optical measurement systems
  • Raising internal and external non-conformance investigations
  • Co-ordinating with the Quality Technicians and Engineers on any quality issues or concerns
  • Inspection of incoming raw materials and manufactured goods and sub-contract operations
  • In-process inspection of parts
  • Creation of key dimensional reports, FAI reports, CofA etc.
  • Calibration of measuring equipment and ensuring the calibration system conforms to standards
  • Promoting a quality culture throughout the organisation
  • Liaising with colleagues and key stakeholders to maintain agreed standards both to internal and customer requirements
What we offer
What we offer
  • Competitive pay
  • Benenden health cover
  • Competitive holiday entitlement
  • Quarterly performance bonuses
  • Comprehensive company sick pay
  • Enhanced pension contributions
  • Cycle-to-work scheme
  • Exclusive discounts portal
  • Double death-in-service cover
  • On-site Mental Health First Aiders
  • Fulltime
Read More
Arrow Right

Aerostructure-Mechanical Inspector - 2nd Shift Lead

SQA Services is a leading Supply Chain and Quality Assurance consulting firm spe...
Location
Location
United States , Stuart
Salary
Salary:
32.00 - 36.00 USD / Hour
sqaservices.com Logo
SQA Services
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must be local
  • Must undergo background check
  • Must be authorized to work in the U.S.
  • Must be ITAR compliant
Job Responsibility
Job Responsibility
  • Responsible for ensuring that final products meet drawing requirements and specifications through thorough inspection processes
  • Lead for the shift that attends management meetings and helps the inspectors with Q&A
  • Report to the Inspection Supervisor and collaborate effectively as part of the inspection team
  • Identify and document any damage or nonconformance issues and conduct investigations into these discrepancies
  • In-process and final inspections of sheet metal final assembly installations on aircraft components such as fuselage, wings, flaps, landing gears, and tail assemblies
  • Maintain accurate inspection logs, write detailed inspection reports, and handle a variety of moderately complex tasks
  • Frequent collaboration with individuals from other departments to ensure quality standards are consistently met
  • Fulltime
Read More
Arrow Right