Metal Inspector Job at Randstad (Surrey)

Metal Inspector

Great opportunity in Surrey BC, we are currently looking for a Ground Inspector/...

Location

Canada , Surrey

Salary:

23.00 CAD / Hour

Randstad

Expiration Date

July 05, 2026

Requirements

You can meet the schedule and shift time: Monday to Saturday
High School diploma, GED Certification, or equivalent experience in a similar role preferred
Min of 1+ years of experience working in a yard or automotive garage environment
Mechanically inclined/experience using hand/power tools
Attention to detail and ability to follow instructions
You are comfortable working in a covered outdoor environment in all types of weather
No physical limitations and ability to lift up to 55 lbs, and stand/walk for 8 hour shift
Good attitude and can work well with no supervision and with the team
You have High Ankle Steel Toe Boots with Toe Cover (metatarsal protector)
Located in Surrey, BC

Job Responsibility

Report problems and communicate throughout the facility via radio
General yard clean up and repairs
Greet customers
Inspect customer loads and directing them to the proper location in the yard to unload
Basic sorting of scrap material and quality inspection
Grading of material and deductions
Doing basic quality assurance of materials
Accurately recording of production data
Climbing up truck ladders to inspect load
Participating in safety, quality and environmental inspections

What we offer

Pay Rate: $23/H
Located in Surrey (Close to Scott Road Station)
Weekly Pay (Direct Deposits)
Minimum 40 hours a week and opportunities for overtime
4% Vacation Pay added to every pay
Extensive training
Opportunities for growth
Team working environment
Free Parking on site

Fulltime

!

Metal Inspector

Great opportunity in Surrey BC, we are currently looking for a Ground Inspector/...

Location

Canada , Surrey

Salary:

23.00 CAD / Hour

Randstad

Expiration Date

July 05, 2026

Requirements

You can meet the schedule and shift time: Monday to Saturday
High School diploma, GED Certification, or equivalent experience in a similar role preferred
Min of 1+ years of experience working in a yard or automotive garage environment
Mechanically inclined/experience using hand/power tools
Attention to detail and ability to follow instructions
You are comfortable working in a covered outdoor environment in all types of weather
No physical limitations and ability to lift up to 55 lbs, and stand/walk for 8 hour shift
Good attitude and can work well with no supervision and with the team
You have High Ankle Steel Toe Boots with Toe Cover (metatarsal protector)
Located in Surrey, BC

Job Responsibility

Report problems and communicate throughout the facility via radio
General yard clean up and repairs
Greet customers
Inspect customer loads and directing them to the proper location in the yard to unload
Basic sorting of scrap material and quality inspection
Grading of material and deductions
Doing basic quality assurance of materials
Accurately recording of production data
Climbing up truck ladders to inspect load
Participating in safety, quality and environmental inspections

What we offer

Pay Rate: $23/H
Located in Surrey (Close to Scott Road Station)
Weekly Pay (Direct Deposits)
Minimum 40 hours a week and opportunities for overtime
4% Vacation Pay added to every pay
Extensive training
Opportunities for growth
Team working environment
Free Parking on site

Fulltime

!

New

Assembly Mechanic - Quality

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Berkeley; Hazelwood

Salary:

24.00 - 51.27 USD / Hour

Boeing

Expiration Date

July 12, 2026

Requirements

2+ years of Assembly Experience or relevant military assembly experience
1+ years of experience with sheet metal assemblies, drilling, countersinking, riveting, and fastener installation
1+ years of experience in manufacturing or manufacturing support environment
Quality Inspector experience
Currently hold or have held a security clearance in the past 24 months
High school graduate or GED
ability to obtain a U.S. Security Clearance
U.S. Citizenship
ability to work any shift

Job Responsibility

Assemble precision assemblies, set up and operate ream fixtures to drill, ream, countersink, spot face, hone and bore for mating major assemblies
Setup and operate shot peen equipment and accessories for stress relieving assemblies as required
Install press fit bushings and force fit bushings
File, fit, hone, ream, drill, tap, saw, burr and adjust
Assemble a variety of production aircraft and spacecraft parts and install aircraft equipment, support equipment or power plant equipment
Install, operationally check out, adjust, rig and pressure check systems
Perform bench and assembly line operational check out, troubleshooting, repair and adjustment of electrical and electronic systems, lighting circuits, power plant systems, wing fold circuits, missile launch racks, aircraft instrumentation, provide flight test instrumentation, fire wiring system, fuel system
Assemble, install, check out physical characteristics and modify wire bundles to aircraft of aircraft mock ups
Bench assemble electrical or electronic components and conductors into electrical units and systems before methods and procedures have been established
Cut, identify, strip, tin, solder, attach components, and pot to prepare wire for assembly

What we offer

competitive base pay and variable compensation opportunities
health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
paid and unpaid time away from work
generous company match to your 401(k)
industry-leading tuition assistance program pays your institution directly
fertility, adoption, and surrogacy benefits

Fulltime

New

Nde Inspector, Certified Welding Inspector (Cwi)

Are you ready to start "Building America"? At Lexicon, we're seeking a skilled N...

Location

United States , Little Rock

Salary:

Not provided

Lexicon, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalency certificate
Must be able to read and understand blueprints and shop drawings and pass an inspector test
Must be able to perform basic math such as addition, subtraction, multiplication, division, geometry and some trigonometry
Currently certified Level II in at least two NDE Methods (VT), (PT), (MT), (UT) to ASNT SNT-TC-1A or equivalent qualification

Job Responsibility

Perform internal and external inspections to determine if a weldment/structure meets the acceptance criteria of a specific code, standard, or document
Interpret codes and specifications in accordance with the drawing requirements
Use a computer to compile and submit data of acceptance or rejection of inspections, as well as for inter-office communications
Recommend and approve repairs as well as perform visual inspection of work in progress and completed work
Monitor welding processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux cored arc welding (FCAW), shielded metal arc welding (SMAW), submerged arc welding (SAW), and plasma arc welding (PAW) to ensure they are performed in accordance with qualified procedures
Verify and document welder qualifications
Verify the compliance of base metals with the applicable specifications
Appraise welding joint designs and joint preparations for compliance with drawing
Verify proper fit, cleanliness, and environmental conditions
Verify tack weld quality

What we offer

Health, Dental, Vision, and Life Insurance
HSA with employer contributions
Life Insurance
Paid Holidays and Vacation
401k with company match
Lexicon University provides free career development and training

Fulltime

Quality Inspector

In this role, you will be the gatekeeper of our production standards. You will f...

Location

Canada , Paris

Salary:

25.00 - 28.00 CAD / Hour

Randstad

Expiration Date

August 02, 2026

Requirements

2+ years of experience in a Quality Control / Inspection role within a manufacturing environment
Experience with retail fixtures, custom metal fabrication, millwork, display cabinetry, or POP displays is highly preferred
Strong ability to read and interpret engineered drawings, structural blueprints, and CAD data
Highly comfortable using manual and digital precision measurement tools (calipers, height gauges, micrometers)
Methodical mindset with an eye for finishing standards
Solid written and verbal communication skills
Basic computer proficiency (Excel, ERP/inventory software)
Ability to handle and move small-to-medium fabricated components
Ability to safely navigate a busy manufacturing floor and stand for extended periods

Job Responsibility

Inspect incoming parts, components, and raw materials against purchase orders, engineering drawings, and CAD specifications
Utilize precision measurement tools to verify that physical parts meet exact geometric tolerances
Identify, tag, and isolate any non-conforming materials or defective parts
Log inspection results, generate Non-Conformance Reports (NCRs), and document supplier defects
Partner closely with Receiving, Engineering, Project Managers, and shop floor production teams
Maintain safety standards and align with OHSA regulations

What we offer

Competitive compensation based on manufacturing experience
Opportunity to work in a large, vertically integrated, modern manufacturing environment
Long-term career growth and development opportunities

Fulltime

Defense - Quality Inspector

This role is at Spirit AeroSystems, Inc., a wholly owned subsidiary of The Boein...

Location

United States , Wichita

Salary:

24.81 - 41.27 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Ability to perform in one or more of the following classifications: Systems/Payload Structures Mechanic A, Assembly Mechanic A, Fuselage Assembly Mechanic A, Underwing Composites Mechanic A, Metals Mechanic A, Process Mechanic A
Ability to certify for Systems inspection function
Ability to investigate and document Root Cause analysis and Corrective action
Ability to determine and submit test and investigation statements
Ability to perform process and hardware audits and surveillances
Ability to perform all functions associated with Level B requirements
Candidates must be able to apply and obtain a security clearance
Must be able to secure Program Access approval
All applicants must be willing and able to work any shift, including alternative work weeks
All Candidates must pass the WorkKeys Assessment

Job Responsibility

Assist in training as applicable to job roles
Investigate and document Root Cause analysis and Corrective action (non-disciplinary)
Determine and submit test and investigation statements
Perform process and hardware audits and surveillances
Perform all functions associated with Level B requirements

What we offer

Competitive base pay and variable compensation opportunities
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program
Fertility, adoption, and surrogacy benefits

Fulltime

Technical Inspector Aircraft

The Aircraft (Rotary Wing) Technical Inspector is responsible for ensuring that ...

Location

United States , Fort Polk

Salary:

38.37 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Five (5) years of recent applicable aircraft maintenance experience
One (1) year experience performing Technical Inspections on rotary wing aircraft
A valid and up-to-date (FAA) Airframe and Powerplant (A&P) license
A Valid FAA Inspection Authorization (IA). If no IA, shall have a minimum of five (5) years as an inspector on helicopters
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location
Valid Driver's License
Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements
Efficient in record keeping and preparation of reports
capable of reviewing other people's work and determining accuracy and conformity to standards
Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records

Job Responsibility

Responsible for ensuring that assigned aircraft are maintained within required specifications and are airworthy before operation
Inspects repairs and modification of aircraft structures, structural components and engines of complex to extreme difficulty
Plans, conducts, and supervises aircraft technical inspections
Develops and implements quality control and ground safety programs to ensure compliance with contract specifications
Evaluates personnel, including verification of skills, training and experience
Performs audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities
Examines parts and components for conformance to design specification to determine serviceability
serviceable, unserviceable-reparable, unserviceable-non reparable, affixing completed appropriate form/tag for disposition
return to stock, route to appropriate shop for repair and/or turn-in. Form/tag will contain comment relative to evaluation and be stamped by the Inspector
Monitors timeliness and applicability of maintenance technical data and technical library

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Munitions Inspector

The Munitions Inspector receives, stores, inspects, tests, transports and mainta...

Location

Qatar , Doha

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Must have intermediate knowledge of the USAF Supply, TMO Munitions and Tech Order systems or US service equivalent
Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs
May be required to operate material handling equipment
Must possess a valid home country driver's license and ability to obtain host nation driver's license
High School diploma or equivalent required
Must have a minimum four years of experience with Military Munitions
Must have completed formal USAF Munitions Systems training or US Service equivalent
Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain Secret Clearance
Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed
Physically capable of performing all required duties

Job Responsibility

Consistently observes and enforces all USAF and host nation explosives safety, AFOSH and security standards during all explosives and non-explosives operations in assigned sites and temporary duty locations
Up-channels any issues impacting munitions operations to Munitions Control and Superintendent
Takes necessary control and ensures timely response actions during emergencies
Conducts all munitions work according to established quality processes, identifying potential problems and recommending solutions
May supervise Other Country National (OCN) Munitions Workforce while providing clear instructions about the work
Inspects munitions and containers in accordance with 11A-1-10, applicable technical directives
Accurately documents all serviceability and accountability actions in a timely manner
Works closely with operations personnel to resolve any serviceability and accountability issues noted during the inspection processes
Conducts warehouse inventories and corrects any discrepancies
Provides support to the assigned custody accounts of the deployed forces

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Select Country

Metal Inspector

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?

Metal Inspector

Metal Inspector

Metal Inspector

Assembly Mechanic - Quality

Nde Inspector, Certified Welding Inspector (Cwi)

Quality Inspector

Defense - Quality Inspector

Technical Inspector Aircraft

Munitions Inspector

Our AI answers in your language