CrawlJobs Logo

Mechatronic Technician 3

cencora.com Logo

Cencora

Location Icon

Location:
Netherlands , Veghel

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

The Mechatronic Technician 3, under the guidance of AMRE Leadership, is integral to the maintenance of our technical equipment. This role is pivotal in ensuring the efficient operation and reliability of Cencora’s assets. Responsibilities are diverse and include, but are not limited to, advanced mechanical and electrical/controls knowledge, demonstrating technical aptitude, utilizing strong analytical skills and the ability to work both independently and collaboratively within a team.

Job Responsibility:

  • Installation and setup of mechatronic systems
  • Perform routine maintenance tasks, inspections, procedures independently
  • Participate in training programs to develop advanced mechanical, electrical and control’s technical knowledge for self and team members
  • Perform preventive maintenance activities according to work instructions
  • Troubleshoot and repair mechanical systems
  • Oversee and troubleshoot mechanical issues and their relation to software and PLC related issues
  • Troubleshooting and repair electrical equipment and controls systems with minimal assistance
  • Repair and rebuilding of equipment
  • Maintain accurate and detailed records of work performed, parts usage, and inventory levels within EAMS (Enterprise Asset Management System) to comply with regulatory requirements and ensure the optimization of maintenance inventory
  • Follow the performance of the production site on a mechanical and software levels and be proactive in preventing minor and mayor issues
  • Train and instruct less experienced personnel on mechanical systems, electrical and controls, safe work practices, proper repair procedures and equipment operation
  • Supports and complies with all appropriate policies, procedures to promote a safe, accident-free and healthy work environment
  • Train and instruct less experienced personnel on mechanical systems, electrical and controls, safe work practices, proper repair procedures and equipment operation

Requirements:

  • 5-8 years of related experience with progressive responsibilities or a combination of education and experience
  • Completion of an associate degree program, trade program, or equivalent combination of experience and education is preferred, but not required
  • Advanced experience with pneumatics, hydraulics, and mechanical systems
  • Advanced English language - must have
  • Moderate experience in electrical and controls systems
  • Moderate experience in software and PLC related systems related to the mechanical steering of the machine
  • Ability to troubleshoot and repair effectively
  • Demonstrates basic knowledge and understanding while performing repair tasks in projects related to warehouse operations, warehouse design, warehouse and business systems, process improvement and standardization
  • Excellent communication and interpersonal skills, with the ability to collaborate effectively with colleagues and cross-functional teams
  • Meticulous attention to detail and commitment to quality and safety
  • Proficiency in EAMS systems and technical documentation practices
  • Ability to communicate effectively both orally and in writing
  • ability to communicate (and work) effectively with people from different technical and business backgrounds, acting as a liaison, understanding, and appreciating different perspectives and translating into terms necessary for any group or individual to understand
  • Strong in communication with collegues, both on site and off site, but also with collegues from the production team working on the site
  • Strong problem-solving skills
  • Strong organizational skills
  • Shows tactful discretion with difficult/sensitive information
  • Ability to understand and discuss information in a manner that establishes rapport, persuades others, and establishes basic understanding for technical and non-technical audiences
  • Ability to resolve issues effectively and efficiently
  • Ability to identify an appropriate level of detail and effort commensurate with assigned tasks
  • Proficiency with basic software such as Microsoft office Suite
  • Basic knowledge of architectural, mechanical / electrical / plumbing (MEP), construction or industrial engineering principals including industry regulations (e.g. ISO, CE, UL, OSHA, ANSI)
  • Capable of simultaneously balancing and accomplishing a variety of tasks
  • Ability to operate in a production-driven environment and perform at a level that is 95% or greater of engineered standards
  • Physical activity requiring reaching, bending, kneeling, stooping, lifting, finger dexterity, grasping, feeling, repetitive motions, talking and hearing
  • Visual requirement is for close vision, distance vision, peripheral vision, and ability to adjust focus
  • Ability to lift 50 lbs
  • Associate is required to stand, walk (or otherwise be mobile)
  • Ability to deal with stressful situations as they arise
  • Ability to operate equipment such as forklifts, pickers, etc, Ability to work in elevated environments, Ability to climb a ladder

Nice to have:

  • Dutch language - will be a plus
  • Existing previous experience to a Pack to Patient system, would be extremely preferable

Additional Information:

Job Posted:
February 20, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Cencora - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Mechatronic Technician 3

Technician 3, Manufacturing Equipment Maintenance

The Technician 3, Equipment Maintenance position is a critical role within our o...
Location
Location
Malaysia , Batu Kawan, Penang
Salary
Salary:
Not provided
sandisk.com Logo
Sandisk
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Certificate / Diploma in Mechanical/ Electronics/ Mechatronics
  • Proficient at troubleshooting electrical, mechanical, pneumatic, and PC software/hardware related issues
  • Ability to use schematics, hand tools, electrical gauges and common test equipment for calibration, diagnosis and repair of equipment
  • Ability to understand PLC system
  • High level attention to detail with methodical approach to troubleshooting and project management
  • Excellent verbal/written communication skills with the ability to effectively communicate with peers, engineering, and managers
  • Self-motivator
  • ability to work independently under general guidance and direction
  • Knowledge in Basic Troubleshooting Flow (Electrical & Mechanical)
  • Knowledge in Electric / Electronic Component
Job Responsibility
Job Responsibility
  • Conduct comprehensive electrical and mechanical troubleshooting to identify and resolve issues in non-functioning equipment crucial to backend processes
  • Provide expert manufacturing and equipment support in a dynamic, high-volume manufacturing environment characterized by rapid technological advancements
  • Meticulously dismantle, adjust, repair, and reassemble equipment in strict accordance with schematics, repair manuals, and precise specifications
  • Execute rigorous preventive maintenance protocols, perform complex repairs, and conduct in-depth troubleshooting diagnoses on production equipment to ensure maximum operational efficiency
  • Demonstrate advanced problem-solving skills to address non-standard issues, operate with minimal supervision, and adapt swiftly to shifting priorities in a fast-paced industrial setting
  • Exhibit a high degree of self-motivation and initiative, effectively managing individual responsibilities while actively contributing to team objectives
  • Collaborate closely with the Engineering department to facilitate new equipment installations and drive continuous improvement initiatives
  • Fulltime
Read More
Arrow Right

Technician 3, Manufacturing Equipment Maintenance

Sandisk understands how people and businesses consume data and we relentlessly i...
Location
Location
Malaysia , Batu Kawan, Penang
Salary
Salary:
Not provided
sandisk.com Logo
Sandisk
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Candidate must possess at least a Diploma in Mechanical, Electronics, or Mechatronics Engineering
  • Experience in troubleshooting automation equipment, such as autonomous robotic vehicles, is an advantage
  • Experience in PLC is also an advantage
Job Responsibility
Job Responsibility
  • Responsible for improving and sustaining the automation equipment capability and meet the KPI (Availability, OEE and Yield)
  • Performing and line troubleshooting and supporting daily production operation
  • Analyze equipment failure root causes and propose corrective actions
  • Ability to identify root cause and provide corrective action through use of Effective problem solving tools
  • Perform regular inspections to identify equipment root cause
  • Perform Preventive Maintenance and calibration the equipment to optimal condition
  • Maintain equipment maintenance documentation and checklist
  • Propose improvements to enhance equipment performance and reliability
  • Support equipment setup, relocation and retirement
  • Assist Engineer in continuous Equipment improvement projects and Automation projects
  • Fulltime
Read More
Arrow Right

Field Service Engineer- Robotics

Location
Location
Canada , Toronto
Salary
Salary:
Not provided
advancedtechsearch.com Logo
Advanced Technology Search Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3-5 of industry experience - robotics, mechatronic devices, medical devices, assembly and manufacturing - specifically in the medical equipment sector
  • Self-motivated with a strong work ethic and ability to operate independently in the field
  • Valid G-class driver's license and passport, with the ability to travel freely between Canada and the U.S.
  • Willing and able to travel frequently to clinical sites across North America, sometimes on short notice
  • Ability to read and interpret mechanical drawings, electrical schematics, or system wiring diagrams
  • Solid understanding of workplace safety standards, particularly when working with powered equipment and medical devices
  • Hands-on experience with mechatronic systems, including software updates, firmware flashing, serial interfaces and basic command-line tools
  • Strong analytical and troubleshooting skills with a demonstrated ability to diagnose complex, system-level issues
  • Comfortable communicating with healthcare staff, engineers, and internal stakeholders in both technical and non-technical contexts
  • Proficient with documentation and reporting using Microsoft Office, Google Docs, and Google Sheets
Job Responsibility
Job Responsibility
  • Travel to hospital and partner sites to perform advanced preventative and corrective maintenance on robotic systems
  • Assemble and iterate prototype units, providing feedback on design, function, and manufacturability
  • Operate robotic devices during clinical demos and trials, supporting customer training and evaluations
  • Troubleshoot and resolve complex mechanical, electrical, and software issues in the field
  • Determines parts, supplies or tools needed to complete service requests
  • Execute and track product validation plans, documenting field test results to support regulatory compliance
  • Submit detailed service reports and communicate field insights to engineering and product teams
  • Mentor junior technicians and contribute to service procedures, training materials, and process improvements
  • Fulltime
Read More
Arrow Right

Technician 3, Manufacturing Equipment

Sandisk understands how people and businesses consume data and we relentlessly i...
Location
Location
Malaysia , Batu Kawan, Penang
Salary
Salary:
Not provided
sandisk.com Logo
Sandisk
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Diploma in Electrical/Electronic or Mechatronics Engineering
  • Able to work independently
  • Have a good interpersonal skill
  • Able to Multitask
Job Responsibility
Job Responsibility
  • Ensure production machine performance is well maintain
  • Assist process/equipment engineers to carry out or setup new device evaluation / engineering run when needed
  • Practice 6’s every time after maintenance/repairing /conversion
  • Ensure all activities perform to the environment procedures
  • Ensure that all waste/ chemical are properly store/label and scrap
  • Maintain and perform troubleshooting on assigned operation
  • Highlight to superior any activities in the company that may be contrary to the environment policy
  • Hand shake Passover/communication book and daily machine status report
  • Follow all environmental procedures in carrying out daily activities
  • Highlight to supervisor of any activities in the company that may be contrary to environment policy
  • Fulltime
Read More
Arrow Right

Maintenance Controls Technician

As a Maintenance Controls Technician, you will be responsible for supporting the...
Location
Location
United States , Manchester
Salary
Salary:
Not provided
batesville.com Logo
Batesville Canada ULC
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Industrial maintenance, mechatronics, or equivalent certification
  • Three years related experience and/or training or equivalent combination of education and experience
  • Basic Microsoft Office skills
  • Programmable Logic Controllers (PLC’s): (Allen Bradley Preferred) Knowledge and ability to troubleshoot and modify/create programs
  • Pneumatic/Hydraulic: Ability to read schematics, understand fluid power concepts
  • Electrical Maintenance: ability to read schematics, understand/troubleshoot motor control circuits, from low voltage to 480V, 3-phase
  • Safety: Work in a safe manner and be aware of potential hazards in the area and safeguarding those hazards
Job Responsibility
Job Responsibility
  • Assists the maintenance associates within the plant during breakdown activities
  • Determine, develop, and execute technical projects (electronic and programming) to be complete, along with developing specifications required for completion
  • Schedule technical projects to avoid production interruptions and assign tasks for completion of projects
  • Review technical drawings and other reference materials to select and recommend new supplies and maintenance methods to improve plant operations
  • Confer and assist contractors to resolve problems with the installation of new equipment
  • Review inspection and repair reports and observe progress of work on unplanned downtime and planned major overhauls to evaluate efficiency and work quality
  • Resource planning including project/work order materials availability, PPE, and work permits
  • Policy deployment, root cause, countermeasure analysis
  • Interaction and coordination with quality, production, and engineering to plan preventive maintenance programs/work orders and to schedule inspections and major overhauls
  • Troubleshoots systemic issues within the plant and effects maintainable countermeasures
What we offer
What we offer
  • Competitive pay
  • Comprehensive medical, dental and vision insurance, as well as prescription coverage, short-term disability, Employee Assistance Program (EAP), and more
  • Generous 401K Matching Program
  • Paid time off
  • Opportunities for development and advancement
  • Fulltime
Read More
Arrow Right

Senior Engineer, Equipment Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...
Location
Location
Malaysia , Batu Kawan
Salary
Salary:
Not provided
sandisk.com Logo
Sandisk
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Engineering (Hons) in Electrical / Electronics/ Mechanical / Mechatronic
  • 3+ years of experience in test equipment engineering, specifically in SSD manufacturing or a related industry, with a strong emphasis on sustaining and maintenance
  • Proven track record of maintaining high slot-on availability and first pass yield in a high-volume production environment
  • Experience in utilizing data analytics for equipment monitoring, troubleshooting, and maintenance optimization
  • Expertise in maintaining and troubleshooting SSD test equipment, with a deep understanding of calibration, reliability, and maintenance protocols
  • Proficiency in data analysis tools (e.g., Python, R, SQL, MATLAB) for monitoring and optimizing equipment performance
  • Strong knowledge of predictive maintenance techniques, including AI-driven approaches to equipment reliability
  • Familiarity with SPC, DOE, and Six Sigma methodologies for continuous improvement
  • Strong leadership skills with the ability to mentor and guide junior engineers and technicians
  • Excellent problem-solving and decision-making abilities, with a focus on data-driven solutions
Job Responsibility
Job Responsibility
  • Ensure that test equipment is functioning optimally, achieving >99.3% slot-on availability and maintaining a high first pass yield
  • Perform routine maintenance, calibration, and troubleshooting of test systems to minimize downtime and ensure high reliability
  • Monitor real-time and historical data to detect issues, reduce failures, and maximize equipment uptime
  • Use data analytics to monitor test equipment performance, identify patterns, and anticipate potential issues before they impact production
  • Analyze test equipment data to improve test efficiency, reduce down times, and enhance tester performance
  • Implement real-time monitoring and diagnostic tools to ensure sustained optimal performance of test equipment
  • Analyze equipment performance data to optimize maintenance schedules and extend the life cycle of test equipment
  • Lead continuous improvement projects focused on sustaining and enhancing the efficiency and reliability of test equipment
  • Lead and mentor a team of engineers and technicians in sustaining tester, sharing best practices for maintenance and troubleshooting
  • Work closely with production, quality, and other cross-functional teams to ensure seamless operation and continuous improvement in testing
  • Fulltime
Read More
Arrow Right

Mechatronics and Robotics Apprentice

As a Mechatronics Junior Technician Apprentice, you will learn to perform the jo...
Location
Location
United States , Jacksonville
Salary
Salary:
Not provided
jll.com Logo
JLL
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 18 years old or older with a high school diploma or GED
  • Must meet the minimum qualifying score on a Mechanical Aptitude Test
  • Ability to travel to attend training at one of 3 training sites in Indiana, Pennsylvania, Georgia, North Carolina or Texas for 12 weeks
  • Basic computer skills, i.e. email, word processing, reading spreadsheets, internet browser basics
  • Basic troubleshooting skills
Job Responsibility
Job Responsibility
  • Learn to perform the job of Mechatronics Junior Technician
  • Install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control, and robotics/automation equipment, systems, and components in a complex Fulfilment/Distribution Center
  • Train in and adhere to all health and safety policies and procedures
  • Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor in OJL
  • Communicate and work well within a team environment both in school and in OJL
  • Work capably with technical documentation
  • Work capably with a computer both in school and on the shop floor
  • Learn to perform work with material transfer conveyors by following the lead of experienced technical advisors
  • Learn to understand, identify, locate malfunctions, remove, replace, adjust, and return to service following the lead of experienced technical advisors
  • Learn PLCs and work with Automation Engineers in a laboratory environment
What we offer
What we offer
  • 401(k) plan with matching company contributions
  • Comprehensive Medical, Dental & Vision Care
  • Paid parental leave at 100% of salary
  • Paid Time Off and Company Holidays
  • Early access to earned wages through Daily Pay
  • Fulltime
Read More
Arrow Right

Mechatronics and Robotics Apprentice

As a Mechatronics Junior Technician Apprentice, you will learn to perform the jo...
Location
Location
United States , Opa Locka
Salary
Salary:
Not provided
jll.com Logo
JLL
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 18 years old or older with a high school diploma or GED
  • Must meet the minimum qualifying score on a Mechanical Aptitude Test
  • Ability to travel to attend training at one of 3 training sites in Indiana, Pennsylvania, Georgia, North Carolina or Texas for 12 weeks
  • Basic computer skills, i.e. email, word processing, reading spreadsheets, internet browser basics
  • Basic troubleshooting skills
Job Responsibility
Job Responsibility
  • Learn to perform the job of Mechatronics Junior Technician
  • Install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control, and robotics/automation equipment, systems, and components in a complex Fulfilment/Distribution Center
  • Train in and adhere to all health and safety policies and procedures
  • Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor
  • Communicate and work well within a team environment both in school and in OJL
  • Work capably with technical documentation
  • Work capably with a computer both in school and on the shop floor
  • Learn to perform work with material transfer conveyors
  • Learn to understand, identify, locate malfunctions, remove, replace, adjust, and return to service
  • Learn PLCs and work with Automation Engineers in a laboratory environment
What we offer
What we offer
  • 401(k) plan with matching company contributions
  • Comprehensive Medical, Dental & Vision Care
  • Paid parental leave at 100% of salary
  • Paid Time Off and Company Holidays
  • Early access to earned wages through Daily Pay
  • Fulltime
Read More
Arrow Right
Remote jobs Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog Salaries About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy