Mechatronic Engineer Job at ASML (Linkou)

Control Systems Software Designer

As a member of a highly motivated, multidisciplinary team, you will design and d...

Location

Canada , Woodbridge

Salary:

36.54 - 54.81 USD / Hour

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

A post-secondary degree specializing in Mechatronics, Systems, Electrical or Computer Engineering
3 years of experience programming Programmable Logic Controllers (PLC), and Human/Machine Interfaces (HMI) using Allen Bradley (Rockwell Studio 5000 Logix Designer) or Siemens (TIA Portal) software
3 years of experience in a hands-on automation/controls environment working on Supervisory Control and Data Acquisition (SCADA) and Manufacturing Execution Systems (MES) systems
Proficiency in understanding programs written in structured test (i.e. Visual Basic, C#, Python, languages). Strong programming, mechanical and electrical problem-solving skills
Experience with configuration/troubleshooting of instrumentation (power supplies, meters, sensors, safety switches, etc.) using vendor software and interfaces
Experience working in Just-In-Time environments and on mission critical systems
Ability to communicate effectively, both orally and in writing
Understanding of robotics, control systems and machine operation with hands-on experience is required
A self-starter with the ability to work as part of a team in a fast-paced environment with minimal supervision

Job Responsibility

Design and develop software programs (PLC and/or PC based) specific to customer and project requirements based on standard ATS programming methods (ATS Global Code Standard)
In depth programming in environments mainly using PLC Ladder logic (Rockwell / Siemens platforms), and structured test (i.e. shell scripting, Visual Basic, C#, Python)
Ability to reverse-engineer and write PLC code from scratch
Select, test and integrate hardware and software components such as robots, I/O, analog devices, motion controllers, sensors, vision systems and lasers
Debug and commission control systems at our facility, during the system integration stage and then at the customer's site during installation. Travel to both domestic and international customer locations for SAT (up to 20% travel per year)
Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality and reduced cost
Work with customers, project managers, designers, toolmakers and electricians to solve problems to provide the customer with a complete, functional automation system
Provide thorough testing of machine functionality to verify software program completeness
Provide accurate documentation for each project and training specific to their current project (i.e. machine operation, programming principles and program structure)
Improve the knowledge and capability of other members of the department through mentoring. Responsible for meeting Team Member level KPIs as assigned. (Budget, Schedule, Quality, CI)

What we offer

Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly snack day, etc.)
Employee Development Programs
Overtime pay
RSP matching
Employee Referral Bonuses
Educational Reimbursement Program

Fulltime

New

Van Pnm Product Development

Mercedes-Benz Research and Development, India is seeking System responsible engi...

Location

India , Bangalore

Salary:

Not provided

Mercedes-Benz AG

Expiration Date

Until further notice

Requirements

Has strong automotive domain knowledge - especially in automotive electronics
Is self-motivated and able to mentor/guide a team of engineers
Has strong inter-personal skills with good communication
Has good experience working with global teams and has a good understanding of OEM/Tier-1 development models
Has proven ability of problem-solving and is able to motivate the team towards problem solving
Has good understanding of the development processes in the automotive OEMs/ Tier-1s
Good understanding of Automotive – Body electronics/Powertrain/Safety systems, ECU (Electronic Control units), SW architecture and ECU functional testing
Can appreciate and embody core values, integrity, and professionalism in day-to-day operations
Has worked in development of ECUs/Electronic components with medium complexity (like Cluster ECU, Seat control ECU, Immobilizer, keyless Entry)
B.E/M. Tech (full-time) from reputed institutions with specialization in Electrical & Electronics / Electronics & Communication / Mechatronics / Instrumentation

Job Responsibility

Development and series support for EE components for Mercedes Benz Vans which fulfil the legal regulations and production demands, the objectives from the project, Carline, and module strategy, regarding function, quality, weight, and costs
Coordination of change requests for changes in components
Monitoring the component-FMEA of the supplier
Provision and management of sample (including delivery of vehicle, board, S-HIL, C-HIL, …)
Plants logistics: Coordinating ordering for plants after blank-release
Assistance in the creation and release of a test and commissioning regulation (PIV) for the components
Organize and participate in test drive (winter/summer)
Participation in SW release and testing on vehicle and providing confirmation
Ensure certification for the vehicle coding data

What we offer

Mitarbeiterrabatte möglich
Gesundheitsmaßnahmen
Mitarbeiterhandy möglich
Essenszulagen
Betriebliche Altersversorgung
Hybrides Arbeiten möglich
Mobilitätsangebote
Mitarbeiter Events
Coaching
Flexible Arbeitszeit möglich

Fulltime

New

Nxe Factory Quality Engineer

The JG7 Factory Quality Engineer is an independent contributor who owns module-l...

Location

United States , Wilton

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

Bachelors or Masters of Science degree in technical domain (e.g. mechanical/electrical/optical/chemical/industrial engineering, mechatronics, physics, or related field) with 2+ years (BS) or a (MS) of relevant work experience in in a technical environment such as quality, manufacturing engineering, or related fields
Hands-on technical experience related to manufacturing quality preferred
Ability to independently lead RCA/CAPA activities
Strong statistical and analytical capabilities
Proficiency in SAP/QMS tools, SPC, FMEA, and structured problem solving
Six Sigma Green Belt preferred (or willingness to achieve)
Ability to influence cross functional teams and drive actions to closure
Legally authorized to access controlled technology as defined in United States Export Administration Regulations

Job Responsibility

Lead DRB / MRB sessions for assigned areas which are directly tied to Quality, ensure rigorous root cause validation, and drive structural implementation of corrective actions
Own SPC performance reviews, including control limit adjustments, capability analysis, and communication of required process improvements
Leads factory in discussions for assigning CTD/CTQ/CTC Definitions
Lead pFMEA updates in response to systemic issues, new learnings, or high-impact events
Own execution and analysis of MSA / Gage R&R studies, driving cross-functional improvements where measurement systems underperform
Actively represent assigned work centers during QMM / 6P Quality Assessments, ensuring evidence of readiness, process compliance, and gap closure
Analyze First Pass Yield Data to understand and drive process stability
Develops dashboards and tracking methodologies related to quality activities
Drive adoption and enforcement of Quality Gates across upstream/downstream partners, ensuring handshakes occur with complete, accurate inputs
Participates, facilitates, or co-lead 4-Eye reviews / Quality Circles to strengthen discipline in quality fundamentals and prevent recurrence of known issues

Fulltime

New

Field Service Engineer - 2L Yieldstar

The Customer Support (CS) organization is responsible for the installations, qua...

Location

United States , Hillsboro

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

Bachelor's degree in relevant Technical Field
Minimum 6 year's experience in a role that requires hands-on Mechanical aptitude, knowledge of pneumatics, hydraulics, electronics, and semiconductor processes
Minimum 2 year's experience using computer applications, including data analysis tools, spreadsheet, and presentation software

Job Responsibility

Gather all information relevant for the problem, analyze using available means, gather additional diagnostic info if needed, decide on initial approach to solve problem and execute, consult with others
Work with the 1st line support team on tool issues, document and package all data relevant for problem resolution (e.g. pass-downs, work orders, field service reports, system problem reports, technical reports) and resolve issues or escalate to GSC/DE
Handle escalations by sending summary emails to central support teams with data, PCCSIM, key help needed and planning and scheduling calls as required
Understand tool issues and errors thoroughly and explain to the team (1L, TL, PL. PM, customers, GSC/DE) as needed. Prepare problem summaries to present to internal teams and the customer during customer calls/passdown
Use tools, replace parts, improve settings, to execute repairs and standard service actions independently as required (during low manpower/absences/complex actions)
Collect data for technical projects, summarize, create PowerPoint summaries and present to stakeholders
Explain appropriate actions to users to correct malfunctions, train customers in use and routine maintenance of equipment, recommend changes in user procedures when needed
Signal gaps and improvement opportunities and report it to the relevant stakeholders
Maintain and broaden own knowledge, shares best known methods within the work group
Provide appropriate support and assistance to less experienced engineers on first tasks

Fulltime

New

Senior Chassis Diagnostic Engineer – Driveline & Trailering

This role is intended for a highly capable technical engineer who can define dia...

Location

Canada , Markham

Salary:

115000.00 - 164600.00 USD / Year

General Motors

Expiration Date

Until further notice

Requirements

Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, Software Engineering, Mechatronics Engineering, Systems Engineering, or equivalent technical degree / experience.
Strong experience in embedded controls software development, including requirements understanding, software design, implementation, unit testing, software integration testing, and production release support.
Demonstrated experience in automotive diagnostics specification and implementation, including UDS, diagnostic infrastructure, diagnostic software implementation, and related validation practices.
Strong working knowledge of safety-critical software development and engineering best practices consistent with ISO 26262.
Experience with automotive communication and software implementation concepts spanning CAN, LIN, and Ethernet.
Strong analytical and problem-solving ability with capability to resolve unusual and difficult technical problems and drive issues to closure.
Strong written and verbal communication skills, with ability to work effectively across internal GM teams and external supplier organizations.
Bachelor's degree in Software/Computer/Electrical/Embedded Systems/Electronics Engineering or equivalent field
8+ years of relevant experience.
Strong experience in developing and executing test scripts using Python

Job Responsibility

Own diagnostic specification development for Driveline and Trailering mechatronic systems, including DTC strategy, enable and inhibit conditions, set and recovery logic, customer notification strategy, remedial actions, and diagnostic data requirements such as freeze frame and Figure of Merit expectations.
Define, design, implement, and release embedded application software and diagnostics for chassis mechatronic control features, translating requirements into software design, implementation, and verification activities.
Lead or directly support software implementation across controller, subsystem, and vehicle levels, including software integration, anomaly resolution, and technical issue troubleshooting.
Use automated development and test environments including SIL, HIL, bench, and in-vehicle validation to verify software functionality and diagnostic behavior.
Drive robust diagnostic design reviews with internal GM stakeholders and suppliers, ensuring implementation meets GM requirements, passes software design review gates, and is approved for release.
Improve diagnostic robustness for edge cases such as environmental variation, part-to-part variation, startup and initialization behavior, hot starts, transient power behavior, and partial networking conditions.
Support common, standardized diagnostic architecture across Mechanical Driveline and Trailering controls, including creation and execution of diagnostic CGs, regression testing strategy, and diagnostic design governance.
Collaborate cross-functionally with systems, controls, calibration, software integration, validation, manufacturing, product, and supplier teams to deliver high-quality technical solutions in a SAFe / agile development environment.
Contribute technically to integrated chassis feature development where Driveline and Trailering capabilities intersect with braking, steering, suspension, propulsion torque management, and broader vehicle motion coordination.
Act as a senior technical contributor and domain leader, helping raise the organization’s capability in diagnostic specification, software implementation discipline, and mechatronic systems understanding.

What we offer

Paid time off including vacation days, holidays, and supplemental benefits for pregnancy, parental and adoption leave.
Healthcare, dental and vision benefits including health care spending account and wellness incentive.
Life insurance plans to cover you and your family.
Company and matching contributions to a Defined Contribution Pension plan to help you save for retirement.
GM Vehicle Purchase Plan for you, your family, and friends.

Fulltime

New

Industrial Engineer

We are a leading developer and manufacturer of mechanical and electronic locking...

Location

United States , Greeneville

Salary:

Not provided

Huf Hülsbeck & Fürst GmbH & Co. KG

Expiration Date

Until further notice

Requirements

Bachelor's degree in an Engineering or Mechatronics Manufacturing field (Industrial, Mechanical, Electronics, etc.)
2–5+ years of experience in automotive manufacturing or assembly operations
Strong knowledge of: Assembly processes and production systems Industrial engineering tools (time studies, line balancing) Lean manufacturing principles
Experience working with manufacturing equipment and automation technologies
Proficiency in Excel and data analysis tools
Experience with robotics, PLCs, or automated assembly systems
Familiarity with automotive standards (e.g., IATF 16949, ISO standards)
Knowledge of CAD software or plant layout tools
Six Sigma certification (Green Belt or higher)
Ability to work with all levels of the organization

Job Responsibility

Analyze and improve assembly line processes to maximize efficiency, productivity, and quality
Develop and maintain standard work instructions, process documentation, and time studies
Identify bottlenecks and implement solutions using lean manufacturing principles (Kaizen, 5S, value stream mapping)
Collaborate with production teams to ensure optimal line balancing and workflow design
Support implementation, validation, and optimization of automated and semi-automated assembly equipment
Work closely with maintenance and engineering teams on machine performance, uptime, and reliability improvements
Evaluate and recommend new manufacturing technologies, robotics, and automation solutions
Assist in troubleshooting equipment issues and implementing corrective actions
Lead or support continuous improvement initiatives to reduce cycle time, scrap, and costs
Conduct root cause analysis using tools such as 5 Whys, Fishbone diagrams, and Pareto analysis

What we offer

Competitive pay
Full comprehensive health insurance
dental
vision
flexible spending account
Disability insurance
401(k) with company match
Paid Time Off

Fulltime

New

Robotics Process Engineer II

The Opportunity: JR Automation, a Hitachi Group Company, is driven to deliver cu...

Location

United States , Lake Orion

Salary:

Not provided

JR Automation

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Engineering Technology, Mechatronics, or related field OR Associate's Degree with 2+ years of related experience
Minimum of 2 years of related experience with robot peripheral devices, tool center points, offline programming software, external axes, and user frames
Experience with one or more robot applications: Material Handling, Dispense (Urethane, Sealer, Adhesive, Paint), Welding (Spot, Arc, Laser)
Willingness to travel up to 35–50% to customer sites and other JR locations
Successfully complete a 10-panel drug screen, physical examination, and background check

Job Responsibility

Develop simulations using one or more platforms for internal and external process validation
Apply cycle time improvement strategies to optimize robotic applications
Confirm robot models and develop offline programs (OLPs)
Teach Tool Center Points (TCPs), Frames, and Loads
Configure robot I/O, including communication protocols
Set parameters for application-specific equipment
Train and mentor team members as directed

Fulltime

New

Product Development Engineering Co-op

ATS is focused on growing our market leading position to continue driving growth...

Location

Canada , Cambridge

Salary:

20.44 - 30.43 CAD / Hour

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Enrolled in a post-secondary program including Manufacturing, Industrial, Mechanical, Robotics or Mechatronics Engineering
Students MUST upload a transcript with previous work term ratings (if applicable) and portfolio
Knowledge of Solidworks, DraftSight, Microsoft Word and Microsoft Excel
Communication and coordination skills using Microsoft Outlook, Teams, and Project
An ability to work and communicate effectively in a team environment
Work in compliance with divisional health, safety and environmental procedures
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods
Report any unsafe conditions or unsafe acts
Report defect in any equipment or protective device
Ensure that the required protective equipment is used for the assigned tasks

Job Responsibility

Support automation product development projects in a multidisciplinary team including software, electrical design, electronics design, mechanical design, and mechanical assembly
Create and maintain multiple project plans on an ongoing basis, producing detailed and accurate weekly project status reports
Coordinate project timelines and deliverables with all project stakeholders
Participate in design reviews and facilitate design changes to improve quality, workability, and reduce cost
Assist in developing production processes to meet stated production volumes, including completion of time studies for various production processes
Conceptualize, evaluate, and maintain current and proposed plant layouts in DraftSight/AutoCAD
Develop equipment, jigs and fixtures list and support costing and procurement efforts
Assist in Jigs and Fixture design to support production processes using SolidWorks
Work with Engineering and Production Team Leads to build and test prototypes during the product qualification phase
Produce and update process documentation in the form of drawings or instructions, using Solidworks, DraftSight, Microsoft Word and Excel

What we offer

Subsidized breakfast and lunch daily
free gourmet beverages - coffee, tea and hot chocolate
treat day is every other week
Receive five vacation days
Half-Day Fridays
Ability to participate in a variety of charitable events
Social club that offers social events throughout the year
Fully equipped production facilities that are clean, quiet and climate controlled

Select Country

Mechatronic Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?