Mechanical Rolling Stock Maintainer Job at Airswift Sweden (Parramatta)

Rolling Stock Technician

This is a great opportunity to join a specialist team working to service rolling...

Location

United Kingdom , Scotland

Salary:

35.00 - 40.00 GBP / Hour

Ganymede

Expiration Date

Until further notice

Requirements

Previous rail experience
Experience hands on in mechanical and electrical fitting work on rolling stock
Ability to work efficiently to deadlines
Must have experience working to instructions for hands on assembly or maintenance tasks
Able to pass Personal Track Safety course or Depot Track Safety course
Ability to read and follow schematics and diagrams
Basic knowledge of IT skills
Ability to pass a Drugs & Alcohol test and Rail Standard Medical Assessment
Attention to detail
Previous experience on DMUs

Job Responsibility

Carry out basic engineering/fitting tasks as directed by the Team Leader
Follow all necessary depot/site health and safety requirements
Follow all engineering quality standards of work and maintain good reporting of asset assessment, work completed and materials used as requested
Maintain good communication with production team members to ensure all work is completed to the required standard and in the necessary time limits
Highlight any concerns relating to fleet condition or provided parts/materials or opportunities for improvement in reports where identified

What we offer

Overtime

Fulltime

Rolling Stock Technician

This is a great opportunity to join a specialist team working to service rolling...

Location

United Kingdom

Salary:

30.00 - 40.00 GBP / Hour

Ganymede

Expiration Date

Until further notice

Requirements

Experience hands on in mechanical and electrical fitting work on rolling stock
Ability to work efficiently to deadlines
Must have experience working to instructions for hands on assembly or maintenance tasks
Able to pass Personal Track Safety course or Depot Track Safety course
Ability to read and follow schematics and diagrams
Basic knowledge of IT skills
Ability to pass a Drugs & Alcohol test and Rail Standard Medical Assessment

Job Responsibility

Carry out basic engineering/fitting tasks as directed by the Team Leader
Follow all necessary depot/site health and safety requirements
Follow all engineering quality standards of work and maintain good reporting of asset assessment, work completed and materials used as requested
Maintain good communication with production team members to ensure all work is completed to the required standard and in the necessary time limits
Highlight any concerns relating to fleet condition or provided parts/materials or opportunities for improvement in reports where identified

Fulltime

Rolling Stock Technician

This is a great opportunity to join a specialist team working to service rolling...

Location

United Kingdom

Salary:

35.00 - 40.00 GBP / Hour

Ganymede

Expiration Date

Until further notice

Requirements

Experience hands on in mechanical and electrical fitting work on rolling stock
Ability to work efficiently to deadlines
Must have experience working to instructions for hands on assembly or maintenance tasks
Able to pass Personal Track Safety course or Depot Track Safety course
Ability to read and follow schematics and diagrams
Basic knowledge of IT skills
Ability to pass a Drugs & Alcohol test and Rail Standard Medical Assessment

Job Responsibility

Carry out basic engineering/fitting tasks as directed by the Team Leader
Follow all necessary depot/site health and safety requirements
Follow all engineering quality standards of work and maintain good reporting of asset assessment, work completed and materials used as requested
Maintain good communication with production team members to ensure all work is completed to the required standard and in the necessary time limits
Highlight any concerns relating to fleet condition or provided parts/materials or opportunities for improvement in reports where identified

Fulltime

Rolling Stock Technician

Are you looking to join a team that is striving for more? This is a great opport...

Location

United Kingdom

Salary:

35.00 - 40.00 GBP / Hour

Ganymede

Expiration Date

Until further notice

Requirements

Previous rail experience
Experience hands on in mechanical and electrical fitting work on rolling stock
Ability to work efficiently to deadlines
Must have experience working to instructions for hands on assembly or maintenance tasks
Able to pass Personal Track Safety course or Depot Track Safety course
Ability to read and follow schematics and diagrams
Basic knowledge of IT skills
Ability to pass a Drugs & Alcohol test and Rail Standard Medical Assessment

Job Responsibility

Carry out basic engineering/fitting tasks as directed by the Team Leader
Follow all necessary depot/site health and safety requirements
Follow all engineering quality standards of work and maintain good reporting of asset assessment, work completed and materials used as requested
Maintain good communication with production team members to ensure all work is completed to the required standard and in the necessary time limits
Highlight any concerns relating to fleet condition or provided parts/materials or opportunities for improvement in reports where identified

Fulltime

Rolling Stock Mobile Equipment Mechanic

At Armour Lumber Mill, uptime isn’t optional. Our rolling stock mobile equipment...

Location

United States , Riegelwood

Salary:

Not provided

West Fraser

Expiration Date

Until further notice

Requirements

3+ years of industrial or heavy equipment mechanical experience
Strong working knowledge of diesel engines, hydraulics, and electrical systems
Ability to read schematics and technical manuals
Welding and fabrication experience preferred
Ability to work independently and manage multiple repair priorities
Willingness to work shifts, overtime, and respond to breakdowns as needed
High School Diploma or GED
Ability to work weekends, holidays, and mandatory overtime to support 24/7 operations
Ability to follow all West Fraser safety policies and procedures
Ability to communicate clearly and respectfully with team members

Job Responsibility

Perform preventative maintenance and repairs on rolling stock and mobile equipment (e.g., forklifts, loaders, skid steers, utility vehicles, yard equipment)
Diagnose hydraulic, electrical, mechanical, and diesel engine systems
Conduct inspections to ensure compliance with safety standards
Troubleshoot breakdowns and minimize operational downtime
Complete work orders accurately and in a timely manner
Maintain a clean and safe work environment
Collaborate with operations and maintenance teams to prioritize repairs

What we offer

Benefits begin DAY 1
Competitive starting pay
A culture that strongly believes in promoting from within
Medical, Dental, and Vision
401k with company match AND additional retirement contribution
Employee Stock Purchase Plan
Life Insurance
Disability Insurance
Paid Vacations and Holidays
A team that supports you — not just a boss that manages you

Fulltime

Production Technician I - Kiefel

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Marion

Salary:

44400.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools
The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift
Normal visual acuity required
Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance

Job Responsibility

Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product and ensure that the quality standards have been met
Load and secure finished product in mobile closets
Execute a machine changeover when assigned (material changeovers only)
Document required information on manufacturing logs and/or POMS system
Identify, correct or escalate any inefficiency in the machine’s performance
Test, inspect and package Inter-Plant Shipping Orders (IPSO)
Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs

Fulltime

Production Technician I - Kiefel

The Kiefel Production Technician I is a Salaried Non-Exempt position which contr...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools
The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift
Normal visual acuity required
Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance

Job Responsibility

Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product and ensure that the quality standards have been met
Load and secure finished product in mobile closets
Execute a machine changeover when assigned (material changeovers only)
Document required information on manufacturing logs and/or POMS system
Identify, correct or escalate any inefficiency in the machine's performance
Test, inspect and package Inter-Plant Shipping Orders (IPSO)
Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs
commuting benefits

Fulltime

Production Technician I, Kiefel Weekend Shift

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools
The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift
Normal visual acuity required
Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance

Job Responsibility

Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product and ensure that the quality standards have been met
Load and secure finished product in mobile closets
Execute a machine changeover when assigned (material changeovers only)
Document required information on manufacturing logs and/or POMS system
Identify, correct or escalate any inefficiency in the machine's performance
Test, inspect and package Inter-Plant Shipping Orders (IPSO)
Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

Select Country

Mechanical Rolling Stock Maintainer

Job Description

Job Responsibility

Requirements

Looking for more opportunities?