CrawlJobs Logo

Mechanical QA/QC Technician

amts.com Logo

AM Technical Solutions

Location Icon

Location:

Category Icon
Category:
Construction

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

To ensure the project is completed in accordance with specifications and to the Project QA plan. Our ideal candidates will have minimum 5yrs experience working in the MEP construction industry. Europe & Asia opportunities.

Job Responsibility:

  • Responsible for working on mechanical inspections related to installations, testing, commissioning etc. for the involved project
  • Conduct inspections of all ongoing activities for mechanical installations
  • Conduct inspections for all mechanical material deliveries
  • Attend all mechanical inspections with client/contractor representatives
  • Submit inspection requests in coordination with concerned site/project engineers
  • Prepare daily QA/QC reports regarding inspections, material, non-conformances etc.
  • Prepare weekly surveillance reports, non-conformance reports and verification of corrective actions
  • Check the drawings and documents used at site for approvals and compliance with project requirements
  • Ensure that all works are carried out as per the approved method statements and drawings
  • Ensure that all equipment used are calibrated and with valid certificates
  • Assist / coordinate the preparation of the final handing over documents such as QCQA documents, testing and commissioning reports etc.
  • Prepare testing and commissioning method statements in coordination with vendors, General Contractor representatives and project owners representatives
  • Represent the Company at regular site meetings
  • Attend Factory Acceptance Tests as required
  • Other duties may be assigned or requested

Requirements:

  • Willingness to travel
  • Minimum 5 years experience working in a QA/QC role
  • A relevant Mechanical Engineering or Mechanical Trade qualification
  • IT Skills – Proficiency in Microsoft Office and report preparation
  • Ability to clearly communicate both orally and in writing to clients and other stakeholders
  • Ability to work effectively as part of a team
  • Valid Manual Handling and Safe Pass certificates
  • Candidates must be eligible to work in the EU
  • EU Work Permit essential

Nice to have:

  • Technicians with QA/QC experience are desirable
  • A QA/QC Qualification would be an advantage but not essential
  • Experience in areas such as: Data Centres, Life Sciences, Semi-conductors

Additional Information:

Job Posted:
December 06, 2025

Work Type:
On-site work
Icon
AM Technical Solutions - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Mechanical QA/QC Technician

Project Architect

As a Project Architect at Shea, you’ll create innovative architectural solutions...
Location
Location
United States , Minneapolis
Salary
Salary:
80000.00 - 100000.00 USD / Year
sheadesign.com Logo
Shea, Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Demonstrated Project Architect experience from project initiation through project completion, coordinating the internal project team, client, general contractors, consultants, engineers and city/health department officials
  • Preparation of schematic, design development and construction documents through thorough knowledge of construction practices and skills in Revit
  • Strong understanding of building, health and accessibility codes and the ability to determine compliance while aligning with design intent
  • Collaboration with other team members, including, but not limited to Designers, Design Directors, Project Managers, Technicians and Architects
  • In-depth knowledge of QA/QC processes
  • Advanced knowledge of architectural building system integration (structural, mechanical, electrical, plumbing, building envelope, fire protection, and accessibility)
  • Capacity to thrive independently and in a teamwork setting, able to shift between multiple projects in a fast-paced and deadline-driven environment
  • Excellent communication skills for conveying design ideas, project progress, and technical information to clients and contractors
  • Bachelor’s or master’s degree in architecture from an accredited school
  • 10+ years of experience
Job Responsibility
Job Responsibility
  • Manage deliverables within the project scope through coordination of internal team and external consultants and contractors, playing a lead role in the management of the drawing sets and the construction administration phase
  • Create and execute innovative architectural design solutions to support client goals, including conceptual sketches, detailed plans, and renderings
  • Conduct on-site visits and inspections to assess project progress, quality and adherence to design specifications. Identify potential issues and develop practical solutions to mitigate risks and ensure success
  • Develop, review, and modify project documentation, ensuring all are accurate, comprehensive, and compliant with relevant codes and regulations
What we offer
What we offer
  • Learning opportunities and mentorship
  • Chance to enjoy Shea’s culture from everyday office interactions to special events
  • Monthly Celebrate Shea gatherings to recognize our team and learn about exciting Shea happenings inside and outside of our office
  • Monthly rep presentations and CEU’s where you can learn about new products, network and create lasting relationships
  • Fulltime
Read More
Arrow Right
New

Qa/qc Inspector Ii - Civil

The QA/QC Inspector 2 is a senior, advanced inspector responsible for overseeing...
Location
Location
United States , Hackberry
Salary
Salary:
Not provided
mcdermott.com Logo
McDermott
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum 7 years of progressive industrial construction/maintenance industry experience is required, with 5+ years of advanced QA/QC inspection in the specified discipline
  • Hold a senior/advanced professional certification for the discipline (e.g., AWS Senior Certified Welding Inspector (SCWI), NICET Level III/IV, or equivalent advanced state/national Civil certifications)
  • Expert knowledge of relevant industry codes and standards, and the ability to interpret and apply them to construction practices
  • Proven ability to manage inspection records for inclusion in the final Mechanical Completion/Turnover Documentation
Job Responsibility
Job Responsibility
  • Act as the lead inspector for high-risk or critical path activities, managing all associated quality documentation and final turnover packages for the assigned discipline
  • Conduct internal and external quality audits of subcontractor processes and systems to ensure adherence to the QMS and contractual requirements
  • Provide technical disposition and approval for complex Non-Conformance Reports (NCRs) and coordinate with regulatory bodies for final approval and commissioning
  • Develop and review Inspection Test Plans (ITPs) and job-specific quality procedures, ensuring they meet the most stringent project specifications and industry codes (e.g., ASME, API, NEC)
  • Mentor and provide expert technical guidance to QA/QC Inspectors 1 and Technicians
  • Fulltime
Read More
Arrow Right

Waste Water Treatment Supervisor

The Wastewater Treatment Plant Supervisor position is responsible for advising t...
Location
Location
United States , Marion
Salary
Salary:
80000.00 - 110000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of 4 years of biological wastewater treatment experience or equivalent
  • Possess a North Carolina Grade 4 Biological Wastewater Treatment Certification or similar grade in another state eligible for reciprocity
  • Have experience and/or qualifications to be an approved Lab Supervisor by NCDEQ or similar regulatory standard
  • Proven strong communication, administrative, and technical leadership skills
  • Ability to manage multiple priorities
  • Good assessment and troubleshooting skills (mechanical, electrical, and process)
  • Good digital literacy with ability to understand and operate automated, SCADA controlled processes
  • Solid understanding of maintenance systems to include preventive maintenance and CMMS
  • Ability to understand regulatory and safety guidelines applicable to biological wastewater treatment, the medical / pharmaceutical industry, and industry in general
  • Interact with all levels of personnel to analyze and solve problems related to equipment, operations, quality control, engineering, and personnel issues
Job Responsibility
Job Responsibility
  • Function as the Operator in Responsible Charge (ORC) for a Grade 4 Biological Wastewater Treatment Facility with direct discharge to environmentally sensitive surface waters
  • Oversee and lead a team of Wastewater Plant Operators that include operators, mechanics, and technicians to support and maintain facility operations
  • Responsible for collecting and analyzing wastewater samples in field and laboratory conditions for all regulatory and process parameters (flow, TSS, BOD5, COD, FC, DO, MLSS, etc.)
  • Responsible for ensuring proper/timely PM’s are conducted, cleaning, and maintaining efficient operating equipment/processes
  • Maintain state laboratory certification and function as Chemical Hygiene Officer for the wastewater laboratory. Required to perform annual method certification and routine QA/QC testing
  • Identify, trouble shoot, and apply problem solving methods for any issues that arise concerning the correct operation of the wastewater treatment plant or any of its functions
  • Provide recommendations for maintaining and improving performance
  • Oversee regulatory compliance of a NPDES direct discharge permit with support from facility EHS manager
  • Prepare and submit required reporting to federal, state, and local agencies
  • Support EHS manager with preparation and negotiation of permit applications
What we offer
What we offer
  • Shift flexibility to trade shifts and leverage overtime opportunities
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Opportunities for training, conferences, certifications, and support for advanced degrees
  • Fulltime
Read More
Arrow Right
New

Rotating Supervisor

We are looking for a Rotating Supervisor for one of our clients with the followi...
Location
Location
Mozambique , Afungi - Cabo Delgado
Salary
Salary:
Not provided
lobelia.earth Logo
Lobellia
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum 10 years of experience in rotating machinery installation and supervision within Oil & Gas or LNG megaprojects
  • Strong experience with compressors, turbines, pumps, generators, and mechanical packages
  • Proven experience in field supervision, alignment, installation, preservation, and pre-commissioning activities
  • Experience working with EPC Contractors, vendors, QA/QC, and commissioning teams
  • Previous LNG project experience is highly preferred
  • Experience working in remote and multicultural environments
  • Strong expertise in rotating equipment installation, alignment, and commissioning activities
  • Good knowledge of Compressors, Gas Turbines, Pumps, Blowers, Generators, Mechanical Packages, Alignment and vibration analysis, Lubrication and preservation systems, Bolt torquing and tensioning, Mechanical Completion and turnover processes, QA/QC documentation and inspection processes, HSE procedures and safe work practices
  • Bachelor’s Degree or Engineering Degree in Mechanical Engineering, or Equivalent Engineering Discipline
  • Fluent in English
Job Responsibility
Job Responsibility
  • Supervise installation and construction activities related to rotating equipment across EPC work packages
  • Attend daily coordination meetings with EPC Contractors and internal project teams
  • Review look-ahead schedules, manpower allocation, tooling, and workfront readiness
  • Ensure readiness of scaffolding, lifting plans, grouting materials, alignment tools, and equipment access
  • Identify and resolve productivity constraints including preservation issues, vendor availability, and documentation gaps
  • Maintain strong field presence to supervise installation of pumps, compressors, turbines, blowers, and generators
  • Ensure correct application of vendor drawings, P&IDs, layouts, ITPs, and approved procedures
  • Supervise equipment positioning, leveling, grouting, soft-foot correction, and alignment activities
  • Ensure proper equipment preservation, lubrication, rotation schedules, and storage conditions
  • Provide technical support and clarification to EPC supervisors, foremen, and field technicians
  • Fulltime
Read More
Arrow Right

General Labourer

Our client, a recognized market leader providing complete automation solutions t...
Location
Location
Canada , Mississauga
Salary
Salary:
22.00 - 23.00 CAD / Hour
https://www.randstad.com Logo
Randstad
Expiration Date
June 11, 2026
Flip Icon
Requirements
Requirements
  • Mechanical Aptitude: Must be mechanically inclined and comfortable working with tools or machinery
  • Experience: Prior experience in Shipping & Receiving is preferred
  • High School Diploma
  • 1+ year of shipping and/or warehouse experience
  • Forklift certification (required or obtained upon hire)
  • Knowledge of health & safety regulations
  • Inventory control and Quality Assurance fundamentals
  • Basic computer literacy
  • Competence with basic shop tools
  • Ability to meet heavy physical demands (lifting up to 100 lbs occasionally)
Job Responsibility
Job Responsibility
  • Print labels and IFC drawings
  • Perform weekly inventory counts and organize consumables
  • Prepare and organize cabinet build materials
  • Complete basic tool maintenance and shelf organization
  • Clean fabrication areas and equipment
  • Sort and restack wire, DIN rail, ground bars, and scrap
  • Support QA/QC activities for shipping prep
  • Assist technicians and complete ad‑hoc fabrication tasks
  • Maintain warehouse cleanliness and organization
  • Prepare and assemble shipments with correct documentation
What we offer
What we offer
  • Flexible working schedules
  • A competitive compensation package, with RRSP-matching
  • Comprehensive benefits coverage (medical, dental, vision, EAP & on-demand virtual health care)
  • A culture that promotes healthy work-life balance with above-market paid time off
  • Challenging work and direct exposure to key industries in the Canadian market
  • A structured training and development program and opportunities for continuous learning
  • Access to Mentorship Program
  • Opportunity to participate in an award-winning wellness program
  • Fulltime
Read More
Arrow Right

Qcs Engineer

Location
Location
Brunei
Salary
Salary:
Not provided
bureauveritas.cz Logo
Bureau Veritas Certification CZ, s.r.o.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Diploma or Degree in Mechanical, Materials, Metallurgy, or related engineering field
  • 5+ years’ experience in inspection, QA/QC, or quality surveillance roles within Oil & Gas
  • Certification such as CSWIP 3.1 or equivalent welding inspection qualification (preferred)
  • ASNT Level II in UT/MT/PT/VT (minimum one method
  • more preferred)
  • Good understanding of NDT methods, inspection workflows, welding processes, materials, coatings, and fabrication quality
  • Strong knowledge of quality assurance/quality control processes, NCR handling, traceability, and quality documentation requirements
  • Working knowledge of ISO 9001 and ISO 17020 requirements related to inspection bodies
  • Skilled in interpreting technical drawings, ITPs, procedures, and inspection reports
  • Proficient in MS Office and familiar with digital inspection/reporting systems (e.g., CIRRAS, SAP)
Job Responsibility
Job Responsibility
  • Conduct quality surveillance on related inspection activities to ensure full compliance with COMPANY procedures, specifications, and approved inspection methods
  • Review inspection reports, NDT results, anomaly classifications, and technical documents to verify accuracy, completeness, and alignment with contract requirements
  • Perform field checks on inspection execution to ensure adherence to approved procedures, safety requirements, and ISO 17020 inspection body obligations
  • Verify calibration status, validity, and compliance of inspection tools, NDT equipment, EX-rated devices, and gauges used in field operations
  • Support the QA team in NCR issuance, root cause analysis, corrective actions, and tracking of close-out activities
  • Assist in maintaining quality records, traceability documentation, inspection registers, and data control systems for audit readiness
  • Monitor vendor, third-party, and contractor quality deliverables, including welding, coating, fabrication, and material inspections
  • Participate in internal audits, surveillance visits, quality meetings, and technical reviews with COMPANY representatives
  • Provide quality feedback to operations, inspection teams, and engineers to ensure continuous improvement in inspection execution and reporting quality
  • Support quality input during planning, reporting, verification, and close-out of inspection activities
  • Fulltime
Read More
Arrow Right

Robotic Welding Technician

The Robotic Welding Technician is responsible for ensuring parts are processed i...
Location
Location
United States , Blytheville
Salary
Salary:
Not provided
lexicon-inc.com Logo
Lexicon, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of five years Robotic Welding experience and/or college degree in Engineering or related field
  • Must have experience running an ABB 6-axis, MIG-welding robot
  • Must be proficient in reading and understanding blueprints
  • Must have at least three years welding experience
  • Must have strong math skills
  • Must have excellent verbal and written communication skills
  • Must be able to work independently and prioritize tasks
  • Must be able to handle multi-tasks with keen attention to detail and accuracy
Job Responsibility
Job Responsibility
  • Operate manual and/or robotic welding equipment
  • Safely apply welds per specifications to produce completed product
  • Produce assemblies of metal work pieces to quality and efficiency standards, including repetitive lifting and placing metal work pieces and sheets into fixtures
  • Measure dimensions of work pieces to ensure conformance using calipers, micrometers, height gages, templates, rulers, etc
  • Read check sheets and prints to determine specifications and accurately complete all required functions
  • Accurately document and maintain information in written or electronic form
  • Perform operator maintenance per established schedules
  • Safely complete finishing functions such as grinding, sanding, etc
  • Perform quality checks as prescribed and report issues to lead and/or supervisor
  • Modify computer-controlled robot movements
What we offer
What we offer
  • Health Insurance
  • HSA with Employer contributions
  • Dental Insurance
  • Vision Insurance
  • Life Insurance
  • Disability Income Benefits
  • Paid Holidays
  • Paid Vacation
  • 401 (k)
  • Fulltime
Read More
Arrow Right
New

Mechanical Engineer

We are seeking a Mechanical Engineer to join our growing team. This role is idea...
Location
Location
United States , Indianapolis
Salary
Salary:
Not provided
kedbluestone.com Logo
KEDbluestone
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or equivalent experience
  • Successfully passed FE (Fundamentals of Engineering) examination
  • 3-6 years of relevant mechanical design experience in the AEC industry
  • Proficiency in REVIT, Design Master, and Microsoft Office Suite
  • Strong communication and organizational skills
  • Familiarity with ComCheck and applicable building codes and standards
Job Responsibility
Job Responsibility
  • Lead standard and complex mechanical design tasks and calculations with minimal supervision
  • Develop and review project drawings, specifications, and cost estimates
  • Attend and contribute to client meetings, construction site visits, and coordination sessions
  • Mentor and provide oversight to Engineer I staff and Design Technicians
  • Serve as Lead Engineer on small to mid-sized projects
  • Participate in QA/QC reviews and edit technical specifications
  • Utilize REVIT, CAD, Design Master, and Bluebeam for design and documentation of HVAC, plumbing, and fire protection systems
  • Perform design calculations and assist in feasibility studies
  • Coordinate with other disciplines to ensure integrated project delivery
  • Track project progress using Ajera and internal projection tools
What we offer
What we offer
  • Competitive salary and benefits
  • Career advancement opportunities
  • Supportive and collaborative work environment
  • Fulltime
Read More
Arrow Right