Mechanical Inspector Job at SYNTECH RECRUITMENT LTD (Uxbridge)

Building mechanical inspector

A Building Mechanical Inspector inspects residential construction of two dwellin...

Location

United States , Los Angeles

Salary:

114150.00 - 127242.00 USD / Year

City of Los Angeles

Expiration Date

Until further notice

Requirements

Four years of full-time paid experience as a building, construction, plumbing, mechanical, electrical, housing, or combined inspector for or on behalf of a governmental agency engaged in general residential construction
Four years of full-time paid experience as a licensed general, masonry, plumbing, mechanical, electrical contractor engaged in general residential construction
Two years of full-time paid experience in carpentry, masonry, electrical, plumbing, or mechanical work, in general residential construction following the completion of a recognized apprenticeship program
Eight years of full-time paid experience in carpentry, masonry, plumbing, mechanical, electrical, or other construction related craft work in general residential construction
One year full-time paid experience, as an Assistant Inspector III or an Inspector Trainee III with the City of Los Angeles
A valid certification from the International Code Council (ICC) per Article 5.13 of MOU #5 and Assembly Bill AB717 is required within two years from the date of appointment
A valid Class C driver’s license issued by the California Department of Motor Vehicles (DMV) is required at the time of filing
Upon appointment, a Building Mechanical Inspector will be required to furnish an automobile, properly insured, for use in City service

Job Responsibility

Inspects residential construction of two dwelling units or less, accessory buildings, signs and swimming pools to secure conformance to zoning ordinances, building, plumbing, mechanical and electrical codes and approved plans, specifications and standards
investigates all complaints and alleged code violations on all buildings
conducts surveys to identify blight, deterioration, and substandard conditions
issues appropriate orders to comply and citations
assists in training other inspection employees as required

What we offer

Mileage will be paid according to established rates

Fulltime

Qa/qc inspector

This role monitors and maintains Harder’s quality standards while complying with...

Location

United States , Phoenix

Salary:

Not provided

Harder Mechanical Contractors

Expiration Date

Until further notice

Requirements

Ability to communicate and work professionally with a broad spectrum of people including employees, craft, and clients
Knowledge of quality control legal standards and procedures
Organized and productive
Strong time management skills and ability to prioritize tasks on an ongoing basis
2+ years of experience with strong 3D piping knowledge
Previous experience with high purity examination
A current or previous AWS CWI or LEV II certification
Previous experience with structural and piping scopes, as well as process piping detailing experience
Demonstrated experience in high-tech tool install process piping systems
Must be able to pass a background check and drug screen to work on the client site

Job Responsibility

Work with the field team on-site to ensure all quality standards are met
Oversee operations and procedures to make sure there are no deviations from the quality requirements and standards
Track quality control statistics, and complete necessary documentation for the Project Management team, and the client
Inspect field work, and work with the Quality Control team to perform necessary tests and quality control assessments on-site
Understand the quality requirements of the client, Harder Mechanical Contractors, and specific local and state regulations

What we offer

Comprehensive medical, dental, and vision benefits – 100% of employee premiums are paid by the company
Generous retirement package includes: 10% retirement contribution made by the company and a company match up to 2% of your annual salary
Profit sharing
Discretionary annual bonus
Paid vacation and holidays
Harder University training and development, as well as other paid professional development opportunities
Team environment that promotes individual growth

Fulltime

Storage Tank Inspector / NDT Technician

As part of the TÜV family, TÜV Rheinland Industrial Services (TRIS) are looking ...

Location

United Kingdom , Warrington

Salary:

Not provided

Risktec Solutions

Expiration Date

Until further notice

Requirements

Engineering technical qualification e.g. ONC, HNC, NVQ level 4, BTech, Degree
Desired – Certified EEMUA 159 Tank Assessor or Inspector (API 653 may be considered)
NDT certified for UT and surface flaw detection (PT, MT) preferred e.g. PCN
Mechanical Engineering background
Understanding of engineering principals
Excellent written and verbal communication
Eye for detail
Ability to accurately follow procedures
Courage to make (and defend) difficult decisions
Good interpersonal skills, and the capability to work independently

Job Responsibility

Examination of storage tanks as per inspection plan / schemes
Undertake and/or oversee necessary Non-Destructive Testing (NDT) for inspections
Coordination of third-party NDT providers for extensive requirements or specialist techniques
Assessment and grading of defects found from inspection and helping to determine remedial actions / recommendations
Assistance in the specification and coordination of repairs
Preparation and issue of inspection reports and certificates including all necessary supporting documents e.g. photographs, NDT reports, assessment calculations etc
Liaison with client contacts re. inspection planning and execution
Working strictly to recognised safe systems of work e.g. PTW, RAMS, CSE etc

What we offer

Bonus Scheme based on Company Profits and Personal Targets
Excellent Health and life insurance, Group Income Protection, Pension, 25 days holiday
Employee Discount scheme
Accredited training to internationally recognised engineering appointment
Career progression opportunities with structured development
Opportunities to work in many sectors of UK industry

Fulltime

Field Observer

LSW Engineers Arizona, Inc. is seeking electrical systems designers for our elec...

Location

United States , Phoenix

Salary:

Not provided

LSW Engineers Arizona, Inc.

Expiration Date

Until further notice

Requirements

Certification as a Commercial Electrical Inspector and/or Commercial Mechanical Inspector
Working knowledge of acceptable construction standards for mechanical, plumbing and/or electrical systems
Experience in working with Building Automation Systems (BAS)
Working knowledge of Microsoft Word and Excel
Professional oral communication
Excellent written communication skills
Ability to work well within a team structure
Ability to learn and grow professionally
Demonstrate a strong work ethic
Ability to work with little or no supervision

Job Responsibility

Perform as a critical construction administration team member to oversee installation and functionality of fire suppression, fire alarm, plumbing, mechanical, electrical and technology systems
Interact with project team members, architects, consultants, clients, and contractors
Prepare written reports listing installation deficiencies and assisting in responding to field questions
Apply strong interpersonal skills and knowledge of multiple fields of construction to ensure project requirements are met
Construction administration for overseeing contractor installations for plan and specification compliance and code compliance
Preparing detailed reports for construction progress and identifying installation deficiencies
Coordinating and administering pre-construction and construction meetings and preparation of minutes
Acting as the Authority Having Jurisdiction (AHJ) for electrical and mechanical projects when contracted
Conducting assessments of existing building conditions and preparing detailed reports
Conducting special electrical and mechanical inspections and providing oversight/supervision of contractor performance

What we offer

Competitive wages
Employer funded profit sharing plan
401k plan with employer safe-harbor contributions
Excellent work environment
Opportunity to expand and improve professional skills

Fulltime

Quality Inspector - Mechanical - Level 2

We're actively seeking a Quality Mechanical Inspector for an immediate opening i...

Location

United States , Hialeah, FL

Salary:

30.00 - 32.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

Previous mechanical inspection experience
Knowledge of GD&T and inspection methodologies
Strong attention to detail and ability to follow inspection plans and protocols
Experience with the use of precision measurement tools and equipment
Ability to read and interpret blueprints and/or engineering drawings
Ability to work effectively within a quality management system
Must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with ITAR

Job Responsibility

Verify that inspection equipment is capable of detecting defects and ensure inspection methodology is in line with drawing intent
Work within the Quality Management system and undergo basic training on policies and procedures
Ability to read and understand drawings to pull the dimensions to create Inspection Test Plans (ITPs)
Understanding of what inspection equipment and methodology would be needed to effectively measure/inspect different mechanical parts
Ability to work in SAP to upload the ITPs for each part where one is created

What we offer

Mileage reimbursement at the US gov't rate ($0.70 per mile driven). Untaxed

Fulltime

Qc inspector – material receiving

Location

United Arab Emirates , Abu Dhabi

Salary:

Not provided

Lobellia

Expiration Date

Until further notice

Requirements

Minimum Qualification: Undergraduate – Major: Mechanical Engineering
Relevant Experience: +7 years
Material receiving inspection in EPC projects experience

Job Responsibility

Report to Site QC Manager regarding all quality matters
Attend joint inspection with Implementation Contractor team to verify material is accepted prior to offer for COMPANY inspection
Visual inspection of materials against packing list i.e. material type, size, grade, class, quantity, heat number, part number etc.
Review of documentation for the materials received for completeness prior to offering inspection to COMPANY
Co-ordination with COMPANY to perform receiving inspections
Any deficiency/damage noted shall be reported to Procurement team for addressing the issue with Vendor
NCR shall be raised for cases not meeting the requirements
Monitor the warehouse periodically to ensure equipment is preserved in accordance with Vendor recommendation and COMPANY specification
Other duties assigned by Project Quality Management

What we offer

All-inclusive salary package
Single status sponsorship
Condition applies for food, accommodation (shared room of 2 persons) & transport – will be provided only on site
Overtime is included in your monthly salary
Other terms and benefits will be discussed to shortlisted candidates

Fulltime

Multi-discipline Inspector/plans Examiner

CAP Government, Inc. is seeking the immediate hire of a licensed Multi-Disciplin...

Location

United States , Fort Pierce

Salary:

Not provided

Bureau Veritas Certification CZ, s.r.o.

Expiration Date

Until further notice

Requirements

State of Florida Professional Engineer (PE)
or State of Florida Plan Review License (PX) in building, electrical, mechanical, and/or plumbing
or State of Florida Inspector License (BN) in building, electrical, mechanical, and/or plumbing
or ICC Residential & Commercial Plans Examiner and/ or Inspection certification in building, electrical, mechanical, and/or plumbing
or Possession of the Journeyman M/E/P Certificate and four years of experience as a Journeyman electrician
Must have knowledge of the Florida Building Code and other regulations pertaining to construction and development
Ability to understand and interpret codes and evaluate project proposals and projects under construction to verify conformance with code requirements

Job Responsibility

Demonstrates excellent communication and customer service skills
Relays technical information and direction to owners, applicants, contractors and municipal clients and staff as necessary
Responds to inquiries regarding compliance with electrical codes
Implements enforcement procedures to correct violations under the direction of the client’s jurisdiction
Is an effective team player and utilizes a collaborative decision-making style to resolve issues or conflicts in a timely manner
May be involved in various interactions with client jurisdictions, developers, architects, engineers, and contractors regarding code compliance
Works with a number of client jurisdictions and their inspection staff to coordinate processes, and procedures, identify issues, and resolve conflicts
Uses effective oral and written communication skills
Prepares written work products, such as correction notices or other correspondence to property owners and contractors outlining necessary corrections
Occasionally performs technical inspections and / or review of plans for commercial and residential structures and systems to assure compliance with the electrical codes

What we offer

medical, dental, and vision coverage
life insurance
short- and long-term disability insurance
401(k)
employee referral
educational reimbursement

New

Welding Inspector

Reporting in to the Construction Superintendent, working as a Field Engineer / W...

Location

United Kingdom , Bridgwater

Salary:

Not provided

ASSYSTEM

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in Mechanical Engineering
Welding Inspector qualification (CSWIP 3.1 or equivalent)
NDT Appreciation qualification
Good working knowledge of Quality Management practices, methods and processes
Experience in punchlist checks and QA/QC activities
Knowledge of documentation used in safety‑critical construction and fabrication environments (e.g., Inspection and Test Plans, End of Erection Status Reports)
Knowledge of the fabrication and installation of pressure systems
Good knowledge of pipework, tanks/vessels, steelwork and heat exchangers
Broad knowledge and understanding of the engineering / construction industry including materials, trades, methods and legal requirements
Excellent organisation, delegation and communication skills

Job Responsibility

Verify that works are delivered in accordance with contractual requirements and notify the Construction Superintendent of any non‑conformance request needs
Provide details to support the issuing of non‑conformance reports
Maintain strong communication with all site teams and ensure surveillance activities are promptly reported
Contribute surveillance data to support KPI measurements
Identify potential quality issues early and support mitigation actions
Assist the team in implementing temporary measures to maintain safety and quality, and take proportionate follow‑up actions (e.g. issuing communications, arranging meetings)
Ensure design decisions are not made informally on site and are escalated through the proper approval process
Maintain awareness of current and upcoming site activities
Ensure tasks are delivered to required health, safety and environmental standards
Develop and maintain an understanding of construction drawings, activities, Quality Control Plans and Quality Inspection Records

What we offer

25 Days Annual Leave + Bank Holidays
Buy & Sell Holiday
8% Company Pension Contributions
Income Protection & 3x Salary Death-in-Service Cover
Competitive Sick Pay
Healthcare Cash Plan – Claim back on dental, optical & more
Free Digital Gym Access – Expert-led fitness classes
Exclusive Discounts – Restaurants, days out & top brands
24/7 Employee Support Line – Mental health, financial & legal help
Cycle to Work Scheme

Fulltime

Mechanical Inspector

SYNTECH RECRUITMENT LTD

Location:
United Kingdom , Uxbridge

Category:
Manufacturing

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
December 12, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Mechanical Inspector

Building mechanical inspector

Qa/qc inspector

Storage Tank Inspector / NDT Technician

Field Observer

Quality Inspector - Mechanical - Level 2

Qc inspector – material receiving

Multi-discipline Inspector/plans Examiner

Welding Inspector

Mechanical Inspector

SYNTECH RECRUITMENT LTD

Location:United Kingdom , Uxbridge

Category:Manufacturing

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:December 12, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Mechanical Inspector

Building mechanical inspector

Qa/qc inspector

Storage Tank Inspector / NDT Technician

Field Observer

Quality Inspector - Mechanical - Level 2

Qc inspector – material receiving

Multi-discipline Inspector/plans Examiner

Welding Inspector

Location:
United Kingdom , Uxbridge

Category:
Manufacturing

Contract Type:
Employment contract

Job Posted:
December 12, 2025