Mechanical Engineer (Mechanisms) - Hands Job at 1X Technologies (Palo Alto, California)

Mechanical Engineer - Hands

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , San Jose

Salary:

120000.00 - 250000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

3+ years of experience in mechanical engineering
Bachelor’s or Master’s Degree in Mechanical, Biomechanical, Robotics, Mechatronics, or similar field
Expert in using 3D CAD software to design parts with complex geometry
Experience owning and designing complex mechanical systems/modules end-to-end, including requirements definition, design tradeoffs, build, and validation
Experience working across multiple disciplines with competing and strict technical requirements
Experience with engineering analysis and simulation tools (e.g., FEA, MATLAB, or equivalent)
Strong understanding of statistical analysis methods (e.g., Cp/Cpk, Design of Experiments (DOE), variance and sensitivity studies) for component- and system-level characterization, validation, and manufacturing readiness
Experience shipping hardware at scale, working with contract manufacturers, supporting NPI builds, and driving complex Failure Analysis & Corrective Actions
Familiarity with electromechanical integration, including sensors, motors, motor drivers, wire harnesses, and communication interfaces

Job Responsibility

Design mechanical parts and assemblies in 3D CAD that meet structural, durability, manufacturability, and industrial design requirements
Generate accurate 2D drawings using GD&T in accordance with ASME Y14.5
Perform tolerance stack-ups and review quality and inspection reports to ensure design intent is met
Prototype, build, and test components / systems to validate performance, reliability, and lifetime requirements
Lead and support testing / validation efforts at the component, module, and system level
Collaborate closely with electrical engineers and systems/integration teams on electromechanical designs
Partner with supply chain, contract manufacturers, manufacturing engineers, and quality teams to drive designs through NPI and into production
Own and drive Failure Analysis & Corrective Actions (FA/CA) for complex issues discovered during manufacturing, testing, or field use
Inspect first articles, support build readiness, and continuously support hardware on development platforms

Fulltime

Mechanical Engineer (Motors and Actuators) - Hands

Since its founding in 2015, 1X has been at the forefront of developing advanced ...

Location

United States , Palo Alto, California

Salary:

107700.00 - 179600.00 USD / Year

1X Technologies

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical or Aerospace Engineering, or equivalent experience
Experience with CAD (Onshape preferred)
Experience with structural FEA
Hands-on experience designing electric actuators and/or motor-transmission assemblies
Strong knowledge of manufacturing processes and techniques to ensure manufacturability for mid- and high-volume manufacturing
Experience bringing complex products from concept to production
Strong prototyping skills and intuition for efficient concept validation

Job Responsibility

Design, prototype, and validate robotics (electro)mechanical designs for electric actuators
Integrate electronics, sensors and cabling into robotic joints with large range of motion and tight packaging constraints
Optimize parts and assemblies for weight, cost, and performance
Create high-quality drawings with GD&T (ASME Y14.5) for manufacturing and production
Perform tolerance stack-up analysis
Author concise documentation of design details, requirements, and test plans

What we offer

Health, dental, and vision insurance
401(k) with company match
Paid time off and holidays

Fulltime

Advanced Research Engineer - Mechanical Engineer (Process Systems)

We are now looking for an Advanced Research Engineer to join our Engineering Des...

Location

United Kingdom , Coventry or Liverpool

Salary:

43000.00 - 50000.00 GBP / Year

Manufacturing Technology Centre

Expiration Date

Until further notice

Requirements

Degree in Engineering (or equivalent)
Experience delivering hydrogen or alternative energy projects
Strong capability in CAD modelling, simulation and engineering drawings
Experience designing pressurised pipework systems and complex engineering systems
Understanding of system integration and safety studies (e.g. HAZOP, ATEX, DSEAR)
Knowledge of P&IDs, PFDs and multidisciplinary engineering documentation
Ability to manage projects across the full product life-cycle (TRL/MRL awareness)
Problem-solving mindset with a hands-on, practical approach

Job Responsibility

Delivering high-quality technical outputs to meet customer requirements, budgets and timelines
Designing and developing systems using CAD, 2D schematics and 3D modelling
Supporting and leading elements of projects, including acting as Technical Lead on smaller work packages
Working on front-end engineering design, including calculations and system specification
Designing pressurised systems and balance of plant solutions
Collaborating with cross-disciplinary teams (mechanical, electrical, process engineers)
Supporting innovation by developing new technical capabilities and research initiatives
Contributing to continuous improvement and safety documentation

What we offer

Competitive Salary
Excellent Pension Scheme
Flexible Working
Vitality healthcare
Opportunities for career growth and multidisciplinary development
Access to world-class facilities and equipment

Fulltime

Mechanical Development Engineer - Mechanical Integration

The Mechanical Development Engineer (MDE) - Mechanical Integration (MI) is respo...

Location

Mexico , San Luis Potosí

Salary:

Not provided

BorgWarner

Expiration Date

Until further notice

Requirements

Minimum of a bachelor’s degree in Mechanical Engineering or related field
Over 5 years of engineering experience in the automotive sector and or a global manufacturing environment with High proficiency in English
Hands-on experience with EV (Electrical Vehicles) and ICE (Internal Combustion Engine) Powertrain systems, including powertrain, transmission, and electric drive module components
Background in powertrain systems, with specific expertise in housing, castings, stampings, bearings, fasteners, seals, plugs, harness, cooling and lubrication with demonstrated experience in development, or integration
Demonstrated success in the design, development, and launch of advanced powertrain systems, with a strong track record of delivering high-performance solutions from concept to production
Teamcenter knowledge
Proficient with Microsoft office products - Outlook, Word, Excel, PowerPoint

Job Responsibility

Design, develop, and release mechanical integration components including housing, castings, stampings, bearings, fasteners, seals, plugs, harnesses, cooling, and lubrication systems to meet defined performance, durability, and cost targets
Select appropriate materials
Create design work orders and provide direction to CAD resources
Perform engineering analysis and calculations
Issue CAE requests and provide technical direction
Create and maintain component and sub-system Design Failure Mode and Effects Analyses (DFMEAs)
Assess structural integrity
Evaluate thermal management performance
Confirm sealing capability
Ensure manufacturability

Fulltime

Construction Mechanical Completion Engineer (Punch List Engineer)

Construction Mechanical Completion Engineer (Punch List Engineer) ensures the ex...

Location

Chile

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Mechanical Engineering
Minimum of 10 years of experience preferably within the construction or oil and gas industry
Relevant experience in 3 major EPC projects
oil & gas, petrochemical sector
Excellent communications and interpersonal skills
Attention to detail, management skills
Team-oriented skills, self-motivation and direction, with strong bias toward timely performance and problem resolution

Job Responsibility

To set up the construction / pre-commissioning / commissioning master ITP models
Cooperate with mechanical completion coordinator, engineering and commissioning team to ensure that all the deliverables required to build the completion database are in line with the contractual requirements (TAG list / family TAG list / system and subsystem list / check sheet and ITP)
To upload in MILEMATE the information prepared by the engineering functions like NPS / NPD / PD system definition, construction, pre-commissioning and commissioning ITP project models, discipline tag extraction
To generate all models necessary for reporting of site inspection for each TAG (construction / pre-commissioning / commissioning)
Participate to the development of MM training program for various project roles
To ensure the set-up the user account of nominated person of construction quality, in agreement with ICT
To perform the gap analysis between company master ITP models and the project approved ITP models limited to construction
To verify the models applicability / family TAG gap analysis for construction phase
To validate the data collection uploaded in MILEMATE
To receive (by discipline supervisors or quality construction inspectors) original punch list, recording them on the punch list record logbook and assuring their insertion in MM

Fulltime

Mechanical Engineer - Production First Line Support Production Engineer

The FLS PE is responsible for providing first-line troubleshooting support to en...

Location

United States , Wilton

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

Bachelor of science in a technical field, Mechanical, Electrical Engineering, or Mechatronics preferred with 2+ years of experience in a technical production or manufacturing environment
Masters Degree in a technical field Mechanical, Electrical or Mechatronics preferred engineering with 2 internships in a technical production environment
Working knowledge with epoxy application in opto-mechanical designs
Working knowledge with mechanical assembly and alignment
Working knowledge with mechanical tooling and test equipment
Working knowledge with epoxy dispensing equipment
Working knowledge with epoxy processing and curing
Working Knowledge in detectors, electro-optical devices and opto-mechanical constructions
Experience in a production environment with high tech products and complex production processes
Capability to interface with multidisciplinary groups (including senior leadership), and be willing to take on responsibility and follow through

Job Responsibility

Provide first-line troubleshooting support to ensure uninterrupted production output for EXE RS work center
Use hands-on troubleshooting with structured problem-solving methodologies to address complex technical challenges
Escalate issues when necessary
Drive continuous improvement through documentation, analysis, and collaboration
Support tooling and product SPC (Statistical Process Control)
Manage disturbance notifications
Work closely with quality teams to maintain and improve material review processes
Provide efficient response to troubleshoot mechanical assembly issues
Provide efficient response to troubleshoot glass to metal bonding issues
Provide efficient response to troubleshoot electrical cable routing issues

Fulltime

New

Senior Mechanical Engineer

Do you want to change how the world creates? At Formlabs, we’re building the too...

Location

United States , Boston

Salary:

117000.00 - 158000.00 USD / Year

Formlabs GmbH

Expiration Date

Until further notice

Requirements

Can share a strong portfolio of previous work with a background in electro-mechanical systems
5+ years industry experience
Want to build a precision tool that is beautiful inside and out
Familiar with thermal systems, optical systems, sensor design, controllers, structures and algorithms
Enjoy the gritty details of part design, material selection and manufacturing techniques
Craft elegant systems that function with efficiency and simplicity
Can communicate effectively with vendors and suppliers across the globe
Are familiar with a variety of manufacturing methods for creating high-volume and high performance products
Are hands on and can work across disciplines to prototype your own designs and solve problems
Have experience with the full product development cycle

Job Responsibility

Push the capabilities of 3D printing by creating innovative solutions to challenging problems
Be a technical leader within a group of mechanical, systems and electrical engineers, designing, reviewing and guiding junior colleagues’ work
Prototype new systems, mechanisms, test materials, and research 3D printing challenges
Architect the numerous subsystems of a 3D printer for performance, manufacturability and reliability
Engineer the most amazing 3D printers on the market

What we offer

Robust equity program to build future wealth through RSUs
Comprehensive healthcare coverage (Medical, Dental, Vision)
401K matching and access to financial advisors
Generous paid Parental Leave (up to 16 weeks)
Tenure-based paid Sabbatical Leave (up to 6 weeks)
Flexible Out of Office Plan – Take time when you need it
Ample on-site parking & pre-tax commuter benefits
Healthy on-site lunches, snacks, beverages, & treats
Regular sponsored professional development opportunities
Many opt-in culture events across our diverse community

Fulltime

New