CrawlJobs Logo

Mechanical Engineer Lead

https://www.randstad.com Logo

Randstad

Location Icon

Location:
India , Coimbatore

Category Icon
Category:
-

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

The Engineer will support the goals and programs established by the management team.

Job Responsibility:

  • Monitor and assess engineering performance, quality and provide feedback for improvement
  • Assess team skills/competencies and create individual development plans
  • Monitor resource loading and develop action plans for staffing as required
  • Review and update practices, procedures and forms required for engineering execution
  • Rollout out new engineering processes and software. Review and improve the existing process and system
  • Check, approve and validate engineering deliverables for proposals and projects
  • Participate in 3D model, HAZOP review and other design review meetings as required
  • Participate in client meetings as required to provide technical input and execution guidance
  • Undertake root cause analysis and provide reports to non-conformances identified on projects
  • Assist with recruitment and undertake interviews as required
  • Review of third-party engineering company competencies
  • Review and approve manhours estimation and review of scope matrix / technical clarifications prepared by discipline engineers
  • Advise and assist project and discipline engineers with the interpretation and clarification of applicable industry codes and client specification requirements
  • Guide the team on the "Lessons learned" process and utilize findings from the process to update tools and processes
  • Provide advice to the team in Identifying the right engineering design vendor and executing the project in line with the schedule & budget
  • Establish training programs to enhance & develop the capability of team individuals

Requirements:

  • Bachelor Degree in Mechanical Engineering
  • 7 to 12 years of industry experience
  • Prior design work experience as lead for a minimum of 5 years on mechanical / structural
  • Sound knowledge of all international codes and standards
  • Thorough knowledge on international codes/ standards
  • All project phases execution from engineering to start up, including pre-commissioning, commissioning and troubleshooting experience

Nice to have:

Past experience as Engineering Manager is preferred

Additional Information:

Job Posted:
May 20, 2026

Expiration:
July 06, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Randstad - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon
PREMIUM
More languages and countries
+ Unlock 30984 hidden job offers
Languages
English Čeština Deutsch Ελληνικά Español Français +15
Countries
United States United Kingdom India Canada Australia +
See plans
Plans from $2.99 / month

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Mechanical Engineer Lead

Lead Mechanical Engineer

Lead Mechanical Engineer role at Climeworks, a leading carbon removal provider. ...
Location
Location
Switzerland , Opfikon, Zurich
Salary
Salary:
Not provided
climeworks.com Logo
Climeworks
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in Mechanical Engineering
  • At least 10 years of experience in process plants as a mechanical static equipment engineer
  • Proven expertise in API and ASME equipment such as heat exchangers, columns, pressure vessels, storage tanks, and packaged auxiliary equipment
  • Hands-on involvement in at least one full-cycle project in the chemical, petrochemical, or renewables industry, covering all phases from FEED and detailed design to construction, commissioning, and start-up
  • Precise, adaptable, and reliable, with a proactive and solution-oriented approach
  • Confident in presenting to executive audiences and EPC contractors, translating technical content into clear, actionable information
  • Fluent in English
  • Ready to travel up to 60% of the time
Job Responsibility
Job Responsibility
  • Lead the development of fit-for-purpose mechanical specifications, design philosophies, and basis of design
  • Ensure owner requirements are clearly defined, documented, and communicated to contractors, and validate that design assumptions meet operational, safety, and regulatory expectations
  • Review contractor submissions, enforce owner requirements, provide technical clarifications, and ensure adherence to schedule, quality, safety, and operability
  • Develop innovative engineering solutions to identify cost-saving opportunities without compromising quality or safety
  • Assure strong integration with process, civil, electrical, and O&M disciplines to achieve seamless and optimized designs
  • Maintain thorough records of technical decisions, design bases, vendor information, and lessons learned for future operational use
What we offer
What we offer
  • 25 paid vacation days every year, plus public holidays
  • Hybrid work setup
  • Up to 4 weeks of remote work annually within any EU country
  • Fair base pay paired with an equity package
  • Inclusive parental leave
  • Dedicated budget to invest in your professional growth
  • Referral Rewards
  • Fulltime
Read More
Arrow Right

Lead Mechanical Engineer

Lead Mechanical Engineer – Pumped Storage Hydro Project (Client Side). The busin...
Location
Location
United Kingdom
Salary
Salary:
Not provided
mintselection.com Logo
Mint Selection
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Ideally 10+ years Mechanical Engineering experience including within a hydropower design and build role in the energy or major utilities sector
  • Hydropower or similar engineering experience (dams / tunnels / reservoirs / powerhouses / major hydraulic control equipment)
  • Demonstrable experience through the full lifecycle of design and build schemes
  • Oversight and assurance roles through delivery
  • Experience in mechanical-civils interfaces
  • Project management experience beneficial
  • Chartered Mechanical Engineer, preferably with a MEng in Mechanical Engineering or equivalent
  • Project Management or Contract qualifications beneficial
Job Responsibility
Job Responsibility
  • Provide technical leadership on hydropower (mechanical) engineering issues to the project team
  • Providing review of: Consultant & contractor designs and calculations
  • Mechanical (turbines) generating equipment designs
  • Electrical generating equipment designs (supported by in-house electrical engineers)
  • Instrumentation control and SCADA system
  • Prepare tender packages and work through tender negotiation for key equipment packages
  • Represent the company and project team with key internal and external stakeholders
  • Provide oversight of hydro/electromechanical engineering through pre-delivery and delivery
Read More
Arrow Right

Senior Mechanical Engineer: Test Development Engineering

As a Senior Mechanical Engineer in Test Development Engineering, you will play a...
Location
Location
United States , South Jordan, Utah
Salary
Salary:
Not provided
cricut.com Logo
Cricut
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering, Mechatronics, or a related field
  • 10+ years of experience in mechanical design, test and calibration equipment development, or precision metrology systems
  • Proficiency in CAD software (Creo, SolidWorks) and related engineering analysis tools (FEA, tolerance analysis)
  • Strong understanding of mechanical systems, pneumatic and electromechanical integration, and manufacturing processes
  • Deep knowledge of measurement science, tolerance analysis, and statistical methods for calibration and product qualification
  • Experience in test system design, metrology instrumentation, and mechanical calibration processes
  • Hands-on experience with mechanical test setups, data acquisition, and troubleshooting of measurement systems
  • Excellent analytical, problem-solving, and documentation skills
  • Strong communication skills and ability to lead cross-functional technical efforts
Job Responsibility
Job Responsibility
  • Conceptualize, design, and document assembly jigs, test fixtures, and precision metrology systems to support both production and validation testing
  • Develop custom calibration and test instruments, including mechanical, pneumatic, and electro-mechanical assemblies for high-accuracy measurements
  • Integrate sensors, load cells, displacement transducers, pressure gauges, and other instrumentation into test systems to support product calibration and verification
  • Collaborate with cross-functional teams (Design, Manufacturing, Quality, Calibration Labs, and Contract Manufacturers) to define test requirements and system capabilities
  • Utilize CAD software (Creo, SolidWorks) to create detailed 3D models and drawings of mechanical systems, with GD&T applied for precision alignment and repeatability
  • Generate and maintain Requirement Documents, Calibration Procedures, and Test System Specifications to ensure alignment between product and test design intent
  • Participate in supplier design reviews and qualification of external test and calibration equipment
  • Develop and validate test procedures, calibration methods, and verification plans for measurement systems and mechanical fixtures
  • Ensure measurement system analysis (MSA), gage R&R, and traceability to NIST or equivalent standards in all calibration processes
  • Conduct statistical evaluations of test data to assess system reliability, repeatability, and reproducibility
What we offer
What we offer
  • competitive Medical, Dental, and Vision coverage
  • 401(k) match
  • generous PTO
  • tuition reimbursement
  • yearly lifestyle stipend
  • exclusive employee discounts
  • Fulltime
Read More
Arrow Right

Mechanical Lead

We are seeking a highly motivated and experienced Data Center Mechanical Lead to...
Location
Location
Marcoussis, Milan, Madrid
Salary
Salary:
Not provided
data4group.com Logo
DATA4 Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or equivalent experience
  • Minimum of 7+ years of experience in data center design and construction or equivalent experience in critical infrastructure
  • Proven track record of success in leading and executing complex mechanical engineering projects
  • English: fluent
  • Experience on Mechanical Systems and discipline (HVAC, CFDs, Boilers, Chillers, Pumps, CRAC / CRAH Units, Air Handling Units, etc.)
  • Strong understanding of data center thermal management, power distribution, and fire suppression systems
  • Experience with commissioning and startup of data center mechanical systems
  • Professional Engineer (PE) license or equivalent
  • LEED AP certification or equivalent in Electrical Engineering
  • Experience with data center infrastructure management software (DCIM) focusing on electrical systems
Job Responsibility
Job Responsibility
  • Lead the design and development of conceptual and detailed mechanical systems for new and existing data centers
  • Analyze cooling and air handling requirements to optimize efficiency, reliability, and energy consumption
  • Select and specify mechanical equipment based on industry best practices, project requirements, and sustainability considerations
  • Ensure mechanical system design seamlessly integrates with other systems (electrical, IT, etc.) through close collaboration with relevant teams
  • Oversee the commissioning process for new and upgraded mechanical systems, ensuring adherence to project timelines and budgets
  • Develop and execute comprehensive commissioning plans in accordance with industry standards and best practices
  • Identify and resolve mechanical commissioning issues efficiently to maintain project progress
  • Collaborate with contractors and internal teams to ensure smooth construction and installation of mechanical components
  • Stay at the forefront of the latest trends and technologies in data center mechanical design and operation
  • Serve as the company’s internal expert on all mechanical aspects of data centers
Read More
Arrow Right

Manager, Mechanical Engineering

The Manager of Mechanical Engineering position is based in Horsham, PA, and will...
Location
Location
United States , Horsham
Salary
Salary:
125000.00 - 160000.00 USD / Year
veeco.com Logo
Veeco Instruments
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS degree in Mechanical Engineering with at least 8 years of experience or an MS degree in Mechanical Engineering with at least 6 years of related experience
  • At least 5 years of people management experience
  • Project management experience
  • Must be proficient using SolidWorks, AutoCAD, SAP or a similar MRP system
  • Experience developing capital equipment
  • Ability to work effectively in a fast-paced, dynamic environment as part of a multi-disciplinary team
  • Ability to take initiative, own full projects, and lead team of mechanical engineers
  • Ability to manage multiple ongoing projects within specified time and budgetary restrictions
  • Ability to read and understand Plumbing and Instrumentation Diagrams (P&ID)
  • Familiarity with plumbing system design using standard and custom components used in high purity gas and wet chemical processing equipment
Job Responsibility
Job Responsibility
  • Manage and lead Mechanical Engineering activities within the PSP/Horsham location
  • Supervise and mentor team members, including outsourced vendors & consultants
  • Define design specifications based on customer requirements and industry standards
  • Verify design intent and ensure compliance with regulatory/safety requirements
  • Lead team through all phases of the design process for new product and continuous product improvement programs
  • Ensure that programs are executed on time, within budget, and meet design specifications and cost targets
  • Prepare and present mechanical designs at peer reviews and cross function design reviews
  • Interface with electrical, process and software engineering, marketing, and operations teams
  • Continually look for opportunities to increase efficiency of the design and build processes
  • Support supply chain with mechanical material procurement efforts within project deadlines
What we offer
What we offer
  • Medical, Dental, and Vision
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) with Company Match
  • Holiday, Vacation, and Sick Time
  • Flexible Spending Accounts (FSA)
  • Commuter Benefits
  • Life and Accident Insurance
  • Disability Insurance
  • Tuition Reimbursement
  • Employee Assistance Program (EAP)
  • Fulltime
Read More
Arrow Right

Principal Mechanical Engineer

Are you a licensed Mechanical Engineer with a passion for designing complex, hig...
Location
Location
United States , Salt Lake City
Salary
Salary:
Not provided
spectrum-engineers.com Logo
Spectrum Engineers
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering
  • Professional Engineer (PE) license
  • 10+ years of mechanical engineering experience, with at least 2 to 5 years focused on healthcare projects
  • Proficiency in Revit, AutoCAD, and mechanical system modeling tools (e.g., Trane Trace, EnergyPlus, or similar)
  • In-depth understanding of ASHRAE, NFPA 99, FGI Guidelines, and healthcare HVAC and plumbing system requirements
  • Strong communication and problem-solving skills
Job Responsibility
Job Responsibility
  • Lead mechanical engineering team efforts for mid-to-large healthcare projects, including hospitals, outpatient clinics, and specialty medical facilities
  • Be a ‘seller-doer’ by leading business development activities to find and build client relationships and win projects
  • Collaborate with architects, project managers, and consultants to design mechanical systems that meet project requirements, codes, and healthcare-specific standards
  • Develop HVAC and plumbing systems designs using Revit and other industry-standard tools
  • Perform load calculations, energy modeling, equipment selection, and system sizing specific to healthcare facilities
  • Prepare and oversee construction documents, including drawings, specifications, and schedules
  • Participate in client meetings and site visits to review progress, resolve issues, and provide construction phase support
  • Ensure mechanical system designs meet ASHRAE, NFPA, FGI, and state/local healthcare codes
  • Guide and mentor junior engineers and designers within the mechanical team
  • Support project budgeting, scheduling, and coordination with internal teams and external stakeholders
What we offer
What we offer
  • High compensation with a profit/bonus accountability system
  • Complete financial transparency on your projects
  • Employee ownership opportunities of company stock
  • Full medical, dental, and life insurance
  • 401k matching with 200% of your contributions up to 6%
  • Fulltime
Read More
Arrow Right

Contract Senior Mechanical Engineer

We are seeking a Contract Senior Mechanical Engineer to lead the development of ...
Location
Location
United States
Salary
Salary:
Not provided
speckdesign.com Logo
Speck Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s or Master’s degree in Mechanical Engineering or a related field
  • At least 7 years of mechanical engineering experience with a proven ability to lead projects from conception to production
  • Expertise in Creo ProE CAD software, with extensive experience in mechanical design, particularly using sheet metal
  • Strong project management skills with the ability to oversee multiple projects simultaneously
  • Excellent communication skills with experience working in a team environment, capable of leading and mentoring junior engineers
  • In-depth knowledge of mechanical design processes and familiarity with industry standard CAD tools
  • 7+ years in mechanical engineering with substantial experience in design and production
  • Exceptional problem-solving skills and the ability to adapt to new challenges and technologies
Job Responsibility
Job Responsibility
  • Utilize Creo ProE CAD software to develop complex mechanical designs and models
  • Design and prototype mechanical components with a particular focus on sheet metal projects
  • Collaborate across multidisciplinary teams to ensure designs meet all specifications and are optimized for manufacturing
  • Oversee the mechanical aspect of projects from conceptualization through to production, handling material selection and the manufacturing processes
  • Engage in the continuous improvement of design practices and methodologies
Read More
Arrow Right

Director, Mechanical Engineering

The Director of Mechanical Engineering at Axon has full responsibility over the ...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or equivalent experience (Master’s degree preferred)
  • Minimum 15+ years of product design experience in high-end consumer or professional electronic products
  • Minimum 6+ years of leading mechanical engineering teams
  • Skilled with hiring and developing high performing teams
  • Proven record of launching high volume electronic product concepts through production
  • Experience with high volume manufacturing and assembly processes
  • Extensive experience collaborating with, and managing, overseas development and manufacturing partners
  • Knowledge working with PDM/PLM systems
  • Experience with change management systems and processes
  • Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
Job Responsibility
Job Responsibility
  • Lead and inspire a talented team of mechanical engineers to innovate, create, and achieve their full potential in a fast-paced and dynamic environment
  • Review and guide the detailed design, development, and testing of cutting-edge mechanical products, systems, and components
  • Enforce engineering rigor and due diligence throughout development lifecycle
  • Ensure projects are executed with precision and meet the highest quality standards
  • Shape and execute the mechanical engineering strategy that drives our company's mission and vision
  • Forge connections with other departments, from marketing to manufacturing, to create a cohesive business strategy
  • Build and maintain relationships with external partners and vendors
  • Regularly communicate project progress, key milestones, and any challenges that arise to senior management
  • Utilize creative problem solving skills to lead ideation of new product architectural concepts for subsystem and system level designs
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Snacks in our offices
  • Fulltime
Read More
Arrow Right