Mechanical BIM Designer Job at Cullum Mechanical (North Charleston)

Senior Mechanical Designer

Bath Engineering is seeking a Designer with 10 – 20 years of Mechanical and/or E...

Location

United States , Corpus Christi, Texas; Tulsa, Oklahoma; El Paso, Texas

Salary:

Not provided

Bath Group

Expiration Date

Until further notice

Requirements

Minimum of 5 years of experience
Working Knowledge of Revit / AutoCad / BIM
Clear understanding of scaling
Able to read plans
Capable of creating plans from mark-ups
Familiar with Excel
Familiar with Adobe Acrobat
Familiar with Microsoft Word
Strong verbal and written communication skills
Able to follow instruction and perform task given with minimal supervision

Job Responsibility

Translate and convert hand drawings and sketches into AutoCad/BIM
Read, evaluate, and interpret designs and drawings
Provide accurate, detailed, and to scale drawings
Conduct site visits and surveys, when required
Maintain accurate records
Not all work is individual, as you could be working with a team of other technicians or design engineers
Work is project-based and can involve working to tight deadlines and providing updates or changes to plans last minute
You may also be required to work on multiple projects at once
All other duties as assigned

Mechanical Designer or Engineer

Are you a Mechanical Designer or Engineer looking for a new challenge? Look no f...

Location

United States , Green Bay, Allouez

Salary:

Not provided

Somerville Architects and Engineers

Expiration Date

Until further notice

Requirements

Four or more years of mechanical design experience for buildings in the healthcare, education, community, or commercial markets
A strong portfolio of work
Experience with Revit, BIM software, and Bluebeam preferred
Experience with Carrier Hourly Analysis preferred but not required
Associate degree or Bachelor’s degree in Mechanical Engineering
Designer of Engineering Systems (DES) credential or Professional Engineer (PE) license
LEED accreditation preferred
Excellent communication skills
Strong attention to detail with critical thinking and problem-solving abilities
Creative approach to developing solutions for building system challenges

Job Responsibility

Collaborating with other engineers while mentoring designers and drafters
Performing building system assessments, documenting existing conditions, and writing reports that provide recommendations for refurbishment or replacement
Writing scope of work documents for mechanical designs
Clearly and effectively presenting complex mechanical engineering concerns and solutions to the owner and design team
Conducting calculations for heating and cooling load, ventilation quantities, and mechanical equipment selection
Utilizing BIM software and visualization methods to design heating, cooling, and ventilation systems and providing layouts
Incorporating best practices and sustainability strategies into designs
Ensuring projects meet client expectations and code requirements
Providing estimates of probable construction costs for mechanical designs
Coordinating with consultants and contractors

What we offer

Generous salary
Health, vision, dental, and life insurance
Employee Stock Ownership Plan (ESOP)
401K & Profit Sharing
Industry-leading annual discretionary bonuses
Paid time off & eight paid holidays

Fulltime

Plumbing Designer or Engineer

Are you a Plumbing Designer or Engineer looking for a new challenge? Look no fur...

Location

United States , Green Bay, Allouez

Salary:

Not provided

Somerville Architects and Engineers

Expiration Date

Until further notice

Requirements

Four or more years of plumbing design experience for buildings in the healthcare, education, community, or commercial markets
A strong portfolio of work
Experience with Revit, BIM software, and Bluebeam preferred
Understanding of Wisconsin Administrative Plumbing code
Associate degree or Bachelor’s degree in Mechanical Engineering
Certified Plumbing Designer (CPD), Designer of Engineering Systems (DES) credential, or Professional Engineer (PE) license
LEED accreditation preferred
Excellent communication skills
Strong attention to detail with critical thinking and problem-solving abilities
Creative approach to developing solutions for building system challenges

Job Responsibility

Collaborating with other engineers while mentoring designers and drafters
Performing building system assessments, documenting existing conditions, and writing reports that provide recommendations for refurbishment or replacement
Writing scope of work documents for plumbing designs
Clearly and effectively presenting complex plumbing engineering concerns and solutions to the owner and design team
Conducting calculations for appropriate plumbing and/or fire protection systems and plumbing equipment selection
Utilizing BIM software and visualization methods to design plumbing systems and provide layouts
Incorporating best practices and sustainability strategies into designs
Ensuring projects meet client expectations and code requirements
Providing estimates of probable construction costs for plumbing designs
Coordinating with consultants and contractors

What we offer

Generous salary
Health, vision, dental, and life insurance
Employee Stock Ownership Plan (ESOP)
401K & Profit Sharing
Industry-leading annual discretionary bonuses
Paid time off & eight paid holidays

Fulltime

Mechanical Engineer

Talented Mechanical Engineer Wanted to Join Our Team. Are you a talented enginee...

Location

Italy , Rome

Salary:

Not provided

Team Group

Expiration Date

Until further notice

Requirements

Degree in Mechanical Engineering or a related field
Minimum of 3-4 years of relevant experience, preferably within a multidisciplinary environment
Proficiency in AutoCAD and mechanical-specific design software
Advanced knowledge of BIM software such as Revit, Allplan, or similar
certification as a BIM Specialist will be considered a plus
Strong analytical and problem-solving skills with great attention to detail
Ability to work both independently and as part of a team
Fluent in English, both written and spoken

Job Responsibility

Design of mechanical systems for civil and building applications: Design of HVAC systems
Design of Fire Protection Systems (sprinklers, hydrants, smoke control)
Design of Plumbing Systems (domestic hot/cold water, drainage, ventilation)
Development of Water Treatment solutions (filtration, softening, disinfection)
Support to building acoustic design
Development and review of preliminary and/or feasibility studies related to mechanical systems
Preparation and validation of mechanical design documents up to the executive design stage
Collaboration with architects, structural engineers, and other professionals to ensure effective integration of mechanical systems within multidisciplinary projects
Ensure compliance of designs with local and international standards for energy efficiency, sustainability, and safety
Preparation of bills of quantities, technical specifications, and tender documents related to mechanical systems

What we offer

The opportunity to be part of the best-performing consultancy group of companies internationally acknowledged as an efficient and sustainable technological partner in providing engineering support for strategic projects
The possibility to participate in all technical design activities and to be actively involved in the detailed design of railway and road routes
A dynamic and international environment where you can learn and improve your professional competencies
A multicultural team to be a part of
A place where innovation guides us
A company committed to behaving responsibly, fairly, and ethically
Competitive salaries
We are a meritocratic team, recognizing talent and hard work and rewarding them appropriately without discrimination based on sex, gender, or religion

Fulltime

Structural Mechanical/Professional Engineer

The Structural Mechanical/Professional Engineer role utilizes expertise in Mecha...

Location

United States , Orlando

Salary:

55.00 - 70.00 USD / Hour

Apex Systems

Expiration Date

Until further notice

Requirements

5-7 years experience minimum relevant experience
BS degree in Powerplant, Civil, Industrial, or Mechanical Engineering or related field
Licensed Professional Engineer
Experienced in development of processes, procedures, and designs adhering to relevant industry standards (e.g., ISO 19650, relevant national BIM standards, ASME codes) and best practices within mechanical system design
Ability to interpret and work with mechanical system designs, BIM execution plans, 3D BIM models (e.g., AutoDesk REVIT), fabrication drawings, interface control documents, performance requirements specifications, and technical calculations
Experienced in mechanical system and BIM model creation and management (preferably with REVIT)
Experienced with performing and reporting structural analysis using FEA software and hand calculations
Awareness of risk management processes related to mechanical design, system integration, constructability, and operational efficiency
CANDIDATES MUST HOLD AN ACTIVE TOP SECRET SECURITY CLEARANCE OR HIGHER AND BE ABLE TO TRAVEL DOMESTICALLY AND INTERNATIONALLY

Job Responsibility

Conducts requirements analysis to elicit, document, and manage the functional, performance, and non-functional requirements of mechanical systems and their integration within the overall project, ensuring compatibility with BIM standards (ISO 19650, ISO16739-1, ISO 12006-2, ISO 23386, ISO 23387)
Develops and maintains detailed mechanical system designs and comprehensive BIM models
Applies mechanical system modeling to visualize, analyze, simulate (e.g., performance, clash detection), and optimize integration of mechanical designs, frames, and support structures
Identifies and assesses potential risks associated with the system design, fabrication, installation, integration, and performance, and proposes mitigation strategies
Contributes to the integration aspects of mechanical systems, including defining and managing interfaces with structural, electrical, plumbing, process, and control systems, utilizing BIM models for coordination and data exchange
Participates in verification and validation planning, defining the strategy and scope to ensure the integration of mechanical systems and structures meet all specified requirements, potentially using model-based checks and supporting physical test planning
Acts as a key liaison across disciplines (architectural, structural, mechanical, electrical), BIM managers, customers, vendors, and construction teams to resolve questions and ensure accurate interpretation and execution of the structure and BIM models

What we offer

medical
dental
vision
life
disability
and other insurance plans
ESPP (employee stock purchase program)
401K program with company match after 12 months
HSA (Health Savings Account on the HDHP plan)
SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions

Autocad/revit designer

We are looking for an energized and driven AutoCAD and REVIT (BIM) Designer to j...

Location

Salary:

Not provided

AM Technical Solutions

Expiration Date

Until further notice

Requirements

Excellent verbal and written communication skills
Strong collaborative and interpersonal skills
Time-management skills and the ability to meet deadlines
Keen attention to detail
Excellent artistic, technical, and computer skills
Semiconductor tool hookup design experience
Electrical design and modeling/software
Navisworks verification of design models
Associates Degree in Computer Aided Drafting or minimum of 5 years of experience
BIM, AutoCAD, REVIT, Microsoft Office Applications, REVIT tools, Bluebeam

Job Responsibility

Generation of drawings and designs in accordance with direction by Architects and Engineers
Preparation of working drawings in 2 or more of the following disciplines: Architectural, Mechanical, Electrical, Plumbing and Life Safety
Development of other aspects of design, such as equipment layouts, elevations, sections, renderings, and architectural, electrical or mechanical details
Create and improve BIM templates, families and libraries
Create/manipulate REVIT, Renderings, REVIT Tools, AutoCAD
BIM Design Coordination between disciplines
Preparation of drawings and 3D models for cleanrooms, laboratories, chemical or gas storage rooms and support facilities
Integrate submittals, manufacturers data and as built information into the BIM Model

Bim Coordinator

As part of the development of its MENA business, and overall global growth, our ...

Location

India , Bengaluru

Salary:

Not provided

Cundall

Expiration Date

Until further notice

Requirements

Bachelor's degree in a relevant Mechanical or equivalent Building services Engineering with proven track record of successfully undertaken BIM responsibilities within MEPF design delivery team with a background in modeling, data management and knowledge of best practices in BIM
Proven ability and leadership skills to lead, monitor and support a team of BIM Technicians and BIM Modelers as well as supporting MEPF design team members already in use of the BIM authoring solutions
Minimum of 7 years broad experience in design and BIM management on large scale projects. (inclusive but not limited to BIM modeling, Coordination, collaboration, data management, Quality Assurance and Control) on large scale multi-disciplinary projects within the Middle East region
Mandatory proficiency on Autodesk Revit and AutoCAD Civil 3D BIM authoring tools
Mandatory proficiency on Autodesk Navisworks Manage
Mandatory proficiency on BIM360 Environment
Excellent English communication and presentation skills
Ability to effectively prioritize tasks and solve problems
High level of creativity and forward thinking with analytical mindset
High Sense of Quality driven deliverables

Job Responsibility

Coordinating the overall BIM Implementation within the Mechanical/Electrical/Public Health /ELV (MEPF) Discipline team and support the multidisciplinary projects delivery
Coordinating the assigned project BIM Engineers / CAD technicians including input to Quality Assurance and Quality Control of models and drawings
Assisting in the Implementation of Building Information Management (BIM) systems
Assisting in the creation of BIM deliverables, Model Federation, Clash Detection Reports, BIM Quality Control Plans, BIM Design Review Procedures, Construction Sequencing (4D) and Cost Estimating (5D), Asset Management BIM Implementation (COBie), e-Specs implementation
Attending meetings with client and third parties and assisting the BIM Leads in presentation and navigation throughout the BIM Models
Assisting and supporting in analysis/implementation of BIM execution plans for BIM deliverables production
Configuring and maintaining the project common data environment to enable the effective management of engineering design deliverables
Assist in planning project BIM deliverables and managing their effective delivery in accordance with the project plan and BIM execution plan
Coordinating BIM issues with design teams to develop and reinforce standards with the goal of refining the models and BIM deliverables
Assist in leading in BIM implementation, standards, modelling workflow & methodologies during project design lifecycle

Structural Designer for waste water treatment plants

You will be joining our team located in Zürich belonging to Water & Environment ...

Location

Poland , Poznań; Kraków; Łódź

Salary:

Not provided

AFRY

Expiration Date

Until further notice

Requirements

Knowledge of structural engineering with 3 to 5 years of experience
Team player and interest in multidisciplinary work, willingness to acquire basic knowledge in other technical fields (mechanical and electrical engineering)
Good English skills at B2-C1 level
Good skills in Microsoft Suite
Solid knowledge in BIM Methodology (openBIM) and collaboration platforms (BIMCollab, etc.)
Solid software skills for structural engineering calculations (for ex. SOFiSTiK, TEKLA
ALLPLAN)

Job Responsibility

Design of civil work structures such as tanks, basins, pumping stations, service buildings for domestic wastewater treatment plants (predominantly designed with reinforced concrete)
Basic sizing given by process engineers
afterwards responsible design work and information collection from machinery and electromechanical equipment as well as from HVAC and EMCR to design a facility that fits to the process and to common rules of design in wastewater treatment (for example German DWA)
The design process follows several stages according to Swiss SIA and or German HOAI (Project basis, feasibility study, pre-design, basic engineering design, authority approval design, submission and proposal phase, detailed design
Design of civil works structures according to BIM methodology together with BIM modelers
Participation in internal / external meetings and video conferences
Regular reporting to Project Managers

What we offer

Private medical insurance
life assurance
sport card (Multisport)
a social found
Exciting and challenging projects
Personal development opportunities
Friendly working atmosphere in a multidisciplinary and international team
Helping to shape a sustainable future

Fulltime

Mechanical BIM Designer

Cullum Mechanical

Location:
United States , North Charleston

Category:
Construction

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 29, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Mechanical BIM Designer

Senior Mechanical Designer

Mechanical Designer or Engineer

Plumbing Designer or Engineer

Mechanical Engineer

Structural Mechanical/Professional Engineer

Autocad/revit designer

Bim Coordinator

Structural Designer for waste water treatment plants

Mechanical BIM Designer

Cullum Mechanical

Location:United States , North Charleston

Category:Construction

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 29, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Mechanical BIM Designer

Senior Mechanical Designer

Mechanical Designer or Engineer

Plumbing Designer or Engineer

Mechanical Engineer

Structural Mechanical/Professional Engineer

Autocad/revit designer

Bim Coordinator

Structural Designer for waste water treatment plants

Location:
United States , North Charleston

Category:
Construction

Contract Type:
Not provided

Job Posted:
January 29, 2026