CrawlJobs Logo
Meta Logo Meta · Manufacturing

Manufacturing Quality Engineer

United States, Rayville, LA +3 locations 150000.00 - 209000.00 USD / Year · Job Posted March 18, 2026
Apply Position
Job Link Share

Job Description

This role is responsible for the generation, implementation, and management of a Manufacturing focused Meta Quality Program, by establishing a Quality Program that is focused on people, processes and accountability through influential vendor management and effective partnerships with site-based stakeholders (General Contractor Teams, Vendor Teams, Trade Partners, and Infra-Data Center Teams). Through leadership and partnerships, the Manufacturing Quality Engineers will utilize our program core competencies to drive vendor improvement objectives and issue mitigation strategies to ensure day one readiness, predictable on-time delivery, and operational reliability of our global campuses.

Job Responsibility

  • Conduct vendor audits, evaluate on site trend data reflective of vendor performance (set in place inspections, construction, start-up, and commissioning execution) and establish strategic vendor improvement objectives to refine vendor processes, training and phase gating that result in reduced risk of shipping issues to sites and impacting start-up and commissioning
  • Develop/monitor quality program metrics to evaluate vendor manufacturing & project performance. Analyze said metrics to understand the root cause of any concerning trends and then work with the relevant parties to correct those items
  • Contribute to building teams by mentoring and developing off-site Vendor teams by providing feedback to meet and exceed manufacturing expectations by defining performance objectives while influencing on-site teammates and partners such as Regional Quality Managers, Building Management System, Quality Managers, General contractor teams, Vendor support teams, Trade Partners, and other Meta Infrastructure Data Center teams
  • Remain informed of operational equipment deficiencies, evaluate systemic potential and program manage systemic vendor RCA and site escalation mitigation strategies
  • In conjunction with the Regional Quality Manager, Building Management System (BMS) Quality Manager, Data Center Engineering & Construction, Infrastructure and Supply Chain Engineering and Facility Operations matrixed teams establish effective processes and standards to enable efficient scope execution and effective cross-functional communications
  • Provide leadership to offsite vendor and on-site Meta Operations Facilities Engineering (MOFE) management & quality teams while interfacing at the highest level between sourcing, design, construction, facility operations leadership and the general contractor
  • Provide direction and feedback to vendor staff, general contractor staff and trade partners on the Owner Furnished Contractor Installed (OFCI) Management and Quality program
  • Provide onboarding & continuous training of Vendor personnel to ensure awareness of quality procedures and specific responsibilities vital to the Meta Quality program
  • Through the establishment of partnerships, coordinate quality issues & schedule dynamics between the Meta design, ISCE, construction, and facility operations teams to ensure operational readiness
  • Audit Quality activities of vendor and project team staff as often and as necessary to assess conformance with the manufacturing expectations
  • Recommend and verify effective implementation of corrective and preventive actions for Vendor Audit & Execution non-conformances and quality issues, in coordination with sourcing partners, vendor management, design, engineering, construction and other functional disciplines
  • Partner with Vendor teams and Project Teams in review of Level 3, 4, and 5 Energization, Start-up, and Commissioning schedules to help ensure issue counts are trending downward, gating issues mitigated, adequate field service representatives are mobilized, and vendor risks are proactively avoided
  • Help drive the closure of open issues and escalate any open items not getting closed out in a timely manner
  • Assist in confirming that Level 2 and Level 3 testing documentation is properly completed and retained in a timely manner that aligns with microschedule milestones
  • Attend required Construction Meetings such as the weekly project and monthly global Mechanical Electrical Plumbing / Operations and Maintenance Quality meeting, weekly meetings, and daily start-up and commissioning meetings
  • Travel domestically & internationally as needed (anticipated 10 to 20%)

Requirements

  • 10+ years experience of Quality Management, Manufacturing Engineering, Supplier Improvement, Process Management or Mission Critical Engineering/Construction/Operations
  • Bachelors in engineering or construction management or equivalent work experience
  • Experience in utilizing analysis, problem-solving, communications skills, and associated quality tools
  • Demonstrated experience in directly and indirectly managing output of complex projects, programs, suppliers, or internal teams
  • A proven communicator with experience energizing short-term and maintaining long-term relationships
  • Experience with sharing information and influencing others (communication skills, experience to liaise cross functionally, internally, and externally. This includes executive communications and presentations

Nice to have

  • Demonstrated experience in supplier performance management
  • Experience utilizing Autodesk BIM360 Field and/or ACC Build software
  • Project Management Professional (PMP) or Equivalent Certifications
  • Technical knowledge of data centers and critical electrical and mechanical systems
  • Certified ASQ quality manager or quality engineer or auditor
  • Industrial and/or manufacturing engineering experience

What we offer

  • bonus
  • equity
  • benefits
Meta - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Manufacturing Quality Engineer

8 matching positions

Manufacturing Quality Engineer

This role is responsible for the generation, implementation, and management of a...
Location
Location
United States , Menlo Park
Salary
Salary:
150000.00 - 209000.00 USD / Year
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 10+ years experience of Quality Management, Manufacturing Engineering, Supplier Improvement, Process Management or Mission Critical Engineering/Construction/Operations
  • Bachelor's in engineering or construction management or equivalent work experience
  • Experience applying root cause analysis, statistical process control, and quality tools (e.g., 8D, FMEA, fishbone diagrams) to resolve manufacturing or construction quality issues
  • Demonstrated experience in directly and indirectly managing output of complex projects, programs, suppliers, or internal teams
  • A proven communicator with experience energizing short-term and maintaining long-term relationships
  • Experience with sharing information and influencing others (communication skills, experience to liaise cross functionally, internally, and externally. This includes executive communications and presentations)
Job Responsibility
Job Responsibility
  • Conduct vendor audits, evaluate on site trend data reflective of vendor performance (set in place inspections, construction, start-up, and commissioning execution) and establish strategic vendor improvement objectives to refine vendor processes, training and phase gating that result in reduced risk of shipping issues to sites and impacting start-up and commissioning
  • Develop and monitor quality program metrics to evaluate vendor manufacturing and project performance. Analyze these metrics to identify root causes of concerning trends and work with the relevant parties to implement corrections
  • Contribute to building teams by mentoring and developing off-site Vendor teams by providing feedback to meet and exceed manufacturing expectations by defining performance objectives while influencing on-site teammates and partners such as Regional Quality Managers, Building Management System, Quality Managers, General contractor teams, Vendor support teams, Trade Partners, and other Meta Infrastructure Data Center teams
  • Remain informed of operational equipment deficiencies, evaluate systemic potential and program manage systemic vendor RCA and site escalation mitigation strategies
  • In conjunction with the Regional Quality Manager, Building Management System (BMS) Quality Manager, Data Center Engineering & Construction, Infrastructure and Supply Chain Engineering and Facility Operations matrixed teams establish effective processes and standards to enable efficient scope execution and effective cross-functional communications
  • Provide leadership to offsite vendor and on-site Meta Operations Facilities Engineering (MOFE) management & quality teams while interfacing at the highest level between sourcing, design, construction, facility operations leadership and the general contractor
  • Provide direction and feedback to vendor staff, general contractor staff and trade partners on the Owner Furnished Contractor Installed (OFCI) Management and Quality program
  • Provide onboarding & continuous training of Vendor personnel to ensure awareness of quality procedures and specific responsibilities vital to the Meta Quality program
  • Through the establishment of partnerships, coordinate quality issues & schedule dynamics between the Meta design, Infrastructure and Supply Chain Engineering, construction, and facility operations teams to ensure operational readiness
  • Audit Quality activities of vendor and project team staff on a regular cadence and as triggered by quality events to assess conformance with the manufacturing expectations
What we offer
What we offer
  • bonus
  • equity
  • benefits
  • Fulltime
Read More
Arrow Right

Manufacturing Quality Engineer

Meta Platforms, Inc. (Meta), formerly known as Facebook Inc., builds technologie...
Location
Location
United States , Fremont
Salary
Salary:
286293.00 - 297745.00 USD / Year
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Requires a Master’s degree in Mechanical Engineering, Computer Science, Applied Sciences, Mathematics, Physics, or related field. Foreign degree equivalent accepted. Requires 36 months of work experience in job offered or in an Engineering-related occupation
  • Requires 36 months of experience in each of the following: Work on optical based networking hardware in a design or engineering role
  • Detailed knowledge in developing manufacturing test solutions for optical based network hardware
  • Demonstrate use of quality tools, methodologies in a manufacturing or engineering environment
  • Conduct Design of Experiments ( DOE ), root cause analysis and troubleshooting of network related hardware issues
  • Perform regular audits of Supplier manufacturing facilities
  • Develop reliability test plans and use reliability prediction tools and techniques to evaluate product reliability performance on new products
  • Ensure product and process quality targets are met by working continuous improvement projects with manufacturers and equipment providers
  • Create policy with a systemic approach to continuous improvements and leveraging the ability to scale
  • Drive root cause and corrective action for failures during manufacturing and operations within the data center
Job Responsibility
Job Responsibility
  • Develop the manufacturing and quality plans for cabling products (as well as Robotics and advanced technologies) for Meta's data centers, which includes copper, single mode fibre, and multimode fibre cabling, patch panels, cable runways, cable enclosures, and connectors
  • Evaluate manufacturing processes by applying knowledge of design, fabrication, assembly, tooling, and materials
  • Participate in design reviews and provide feedback for DFM (design for manufacturability), DFT (design for testability), yield improvements and quality control, and audit manufacturing sites to assess supplier’s capabilities and implement manufacturing and quality best practices
  • Lead a select contractor workforce in delivering high-value quality support across multiple technology domains
  • Drive lean projects to improve manufacturing and data center processes to eliminate waste, reduce cost, and improve yield
  • Provide technical leadership and expertise within the supply chain teams throughout the entire hardware product lifecycle
  • Ensure product and process quality targets are met by working with engineering to design test methods, establishing standards, and driving continuous improvement with manufacturers and suppliers
  • Assure product and process quality by designing test methods and establishing manufacturing process standards
  • Improve manufacturing efficiency by analyzing and planning workflows, space requirements, and equipment layout
  • Prepare product and process reports by collecting, analyzing, and summarizing information and trends in manufacturing, field, and RMA data
What we offer
What we offer
  • bonus
  • equity
  • benefits
  • Fulltime
Read More
Arrow Right

Staff Manufacturing Quality Engineer

As a Staff Manufacturing Quality Engineer for the Atlas program, you will lead t...
Location
Location
United States , Waltham
Salary
Salary:
101545.00 - 139625.00 USD / Year
bostondynamics.com Logo
Boston Dynamics
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Manufacturing, Mechanical, Industrial, Electrical Engineering, or a related field
  • Master’s degree a plus
  • 6+ years of experience in manufacturing quality engineering, process validation, metrology, or advanced manufacturing of electromechanical systems
  • Strong capability with ASME GD&T, dimensional inspection, and measurement methods
  • Experience developing or implementing quality systems in prototype, R&D, or low-volume production environments
  • Demonstrated ability to write detailed, accurate inspection instructions, quality procedures, and verification documents
  • Hands-on experience with metrology tools, inspection equipment, incoming material verification, or measurement system development
  • Strong experience with root cause analysis, corrective actions, PFMEA, control plans, and structured problem-solving
  • Familiarity with torque control, precision fits, alignment features, shimming, and other high-accuracy assembly concepts
  • Ability to collaborate across design, manufacturing, and supply chain to resolve quality issues and improve build consistency
Job Responsibility
Job Responsibility
  • Lead the development of quality systems for Prototype operations, including nonconformance management, traceability, documentation standards, and in-process quality gates
  • Define metrology practices and measurement requirements based on ASME standards, tailored for complex, precision components used in R&D and low-volume builds
  • Conduct capability studies, gauge R&R, and measurement system evaluations to establish long-term quality infrastructure. Support selection, calibration, and validation of inspection equipment and metrology tools
  • Write inspection protocols, acceptance criteria, control plans, and verification methods for critical mechanical, electrical, and electromechanical components
  • Partner with Hardware Engineering to identify CTQs, refine tolerances, and integrate manufacturability and quality considerations into evolving designs
  • Work with Manufacturing Engineering to implement process controls, error proofing, and quality checkpoints throughout the assembly workflow
  • Support prototype builds hands-on, diagnosing assembly issues via root causing methodologies, verifying quality criteria, and implement corrective actions for internal and supplier quality issues
  • Define quality metrics for low-volume production, including defect trends, supplier performance, dimensional conformance, and first-pass yield
  • Contribute to training materials, visual standards, SOPs, and quality documentation for assembly and inspection teams
  • Collaborate with Hyundai Motor Group teams as needed, leveraging their expertise in high-precision, high-volume quality systems
What we offer
What we offer
  • medical
  • dental
  • vision
  • 401(k)
  • paid time off
  • annual bonus structure
  • Fulltime
Read More
Arrow Right

Quality Manufacturing Engineer

Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting...
Location
Location
Argentina , Buenos Aires
Salary
Salary:
Not provided
cherry.vc Logo
Cherry Ventures
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of 5 years’ experience in quality engineering
  • Strong analytical & mechanical technical experience
  • Effective verbal and written English communicator
  • Effective facilitator of cross functional team meetings
  • Good time management / project management capabilities
  • Ability to read and interpret 2D drawings/specifications
  • Strong experience in Advanced Product Quality Planning (APQP)
  • Minimum of 2 years of experience working with Customers and Suppliers
  • Full understanding of IATF 16949 Automotive standard (or equivalent)
Job Responsibility
Job Responsibility
  • Lead engineering centric activities for internal and external customers
  • Utilize strengths as an advanced product quality planning engineer to improve our Quality Management System and related processes
  • Work cross-functionally with internal and external customers teams to improve customer experience by preventing customer complaints and rejections
  • Work closely with engineering and lead a world class organization effectively managing a proactive system following AS9145/ IATF 16949 (ISO TS 16949) requirements through internal and external resources to ensure quick completion
Read More
Arrow Right

Staff Manufacturing Quality Engineer

As a Staff Manufacturing Quality Engineer for the Atlas program, you will lead t...
Location
Location
United States , Waltham
Salary
Salary:
101545.00 - 139625.00 USD / Year
bostondynamics.com Logo
Boston Dynamics
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Manufacturing, Mechanical, Industrial, Electrical Engineering, or a related field
  • Master’s degree a plus
  • 6+ years of experience in manufacturing quality engineering, process validation, metrology, or advanced manufacturing of electromechanical systems
  • Strong capability with ASME GD&T, dimensional inspection, and measurement methods
  • Experience developing or implementing quality systems in prototype, R&D, or low-volume production environments
  • Demonstrated ability to write detailed, accurate inspection instructions, quality procedures, and verification documents
  • Hands-on experience with metrology tools, inspection equipment, incoming material verification, or measurement system development
  • Strong experience with root cause analysis, corrective actions, PFMEA, control plans, and structured problem-solving
  • Familiarity with torque control, precision fits, alignment features, shimming, and other high-accuracy assembly concepts
  • Ability to collaborate across design, manufacturing, and supply chain to resolve quality issues and improve build consistency
Job Responsibility
Job Responsibility
  • Lead the development of quality systems for Prototype operations, including nonconformance management, traceability, documentation standards, and in-process quality gates
  • Define metrology practices and measurement requirements based on ASME standards, tailored for complex, precision components used in R&D and low-volume builds
  • Conduct capability studies, gauge R&R, and measurement system evaluations to establish long-term quality infrastructure. Support selection, calibration, and validation of inspection equipment and metrology tools
  • Write inspection protocols, acceptance criteria, control plans, and verification methods for critical mechanical, electrical, and electromechanical components
  • Partner with Hardware Engineering to identify CTQs, refine tolerances, and integrate manufacturability and quality considerations into evolving designs
  • Work with Manufacturing Engineering to implement process controls, error proofing, and quality checkpoints throughout the assembly workflow
  • Support prototype builds hands-on, diagnosing assembly issues via root causing methodologies, verifying quality criteria, and implement corrective actions for internal and supplier quality issues
  • Define quality metrics for low-volume production, including defect trends, supplier performance, dimensional conformance, and first-pass yield
  • Contribute to training materials, visual standards, SOPs, and quality documentation for assembly and inspection teams
  • Collaborate with Hyundai Motor Group teams as needed, leveraging their expertise in high-precision, high-volume quality systems
What we offer
What we offer
  • medical, dental vision, 401(k), paid time off, annual bonus structure
  • Fulltime
Read More
Arrow Right

Quality Engineer - Manufacturing

Drive Excellence as a Quality Engineer! At Kingspan Insulation we’re seeking a p...
Location
Location
Ireland , Castleblayney
Salary
Salary:
Not provided
jobs.360resourcing.co.uk Logo
360 Resourcing Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree / Diploma level qualification in Engineering, Science or Quality
  • Experience within a similar role
  • Application of problem-solving tools
  • Excellent numeracy skills and ability to analyse data for trends
  • Excellent oral and written communication skills
  • Excellent organisational and strong workload prioritisation skills
  • Experience of working with various IT programs i.e. MS Word, Excel
Job Responsibility
Job Responsibility
  • Develop a full understanding of product quality critical characteristics, standards, and third-party certification requirements
  • Apply in-process and final product specifications effectively to ensure consistent conformity
  • Maintain accurate inspection and test plans within SAP, ensuring they are fully understood and followed
  • Support production team leaders in applying quality standards to all manufactured products
  • Carry out product quality inspections and conduct measurement system analyses (including gauge R&R)
  • Identify opportunities to improve production methods or equipment to enhance product quality and customer satisfaction
  • Cooperate with management on site-wide continual improvement programmes
  • Lead reporting, investigation, and corrective action implementation following accidents, incidents, or events
  • Work with internal and external stakeholders to resolve quality issues, including customer complaints
  • Conduct internal process, product, and supplier audits to ensure ongoing compliance with internal, customer, and third-party requirements
What we offer
What we offer
  • 25-days annual leave plus bank holidays
  • Competitive salary range
  • Contributory pension scheme
  • Life assurance
  • Employee Assistance Programme
  • Cycle to work scheme
  • Discounted health care
  • Fulltime
Read More
Arrow Right

Quality Assurance Engineer, Manufacturing

Xometry powers the industries of today and tomorrow by connecting the people wit...
Location
Location
United States , Detroit
Salary
Salary:
Not provided
cherry.vc Logo
Cherry Ventures
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Science Degree in Manufacturing Engineering or a Technical related field is preferred
  • Minimum of 4-6 years of experience in engineering, quality role, or equivalent
  • Minimum of 4-6 years of experience in supplier-facing role or equivalent
  • Working knowledge of and/or education, skills, and experience associated with manufacturing processes, engineering drawing requirements
  • Capable of performing root cause analysis and identifying solutions to complex problems
  • A self-starter who can drive actions to completion
  • Strong organizational skills and the ability to work in a dynamic environment
  • Able to multitask, meet deadlines and support all supplier quality field activities
  • Experience with DFMEA/PFMEA and DFM/DFQ
  • Strong manufacturing knowledge
Job Responsibility
Job Responsibility
  • Enhance Supplier Quality Culture by leading or participating in process improvement projects to further develop the quality programs and procedures - Setting our Global Partner Network up for success
  • Utilizes appropriate quality tools (lean and Sigma) to help resolve issues related to non-conformances and Customer RMA’s
  • Manages supplier related NCR/SCAR/CAR activities to ensure timely administration of activities and records
  • Ensure compliance with company policies, practices, procedures and work rules to support and maintain an AS9100-compliant Quality Management
  • Analyze non-conformance trends to evaluate effectiveness of corrective actions
  • Problem solve and follow up on troubled orders to improve supplier quality
  • Apply engineering knowledge on supplier manufacturing to ensure quality hardware meets customer requirements
  • Assess the impact of manufactured part rejections
  • communicate with suppliers to work through problems and resolve case
  • Participate in QA and RMA Meetings (Live Reviews)
Read More
Arrow Right

Quality Assurance Engineer, Manufacturing

Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting...
Location
Location
United States , Waltham
Salary
Salary:
84000.00 - 109000.00 USD / Year
cherry.vc Logo
Cherry Ventures
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Science Degree in Manufacturing Engineering or a Technical related field is preferred
  • Minimum of 4-6 years of experience in engineering, quality role, or equivalent
  • Minimum of 4-6 years of experience in supplier-facing role or equivalent
  • Working knowledge of and/or education, skills, and experience associated with manufacturing processes, engineering drawing requirements
  • Capable of performing root cause analysis and identifying solutions to complex problems
  • A self-starter who can drive actions to completion
  • Strong organizational skills and the ability to work in a dynamic environment
  • Able to multitask, meet deadlines and support all supplier quality field activities
  • Experience with DFMEA/PFMEA and DFM/DFQ
  • Strong manufacturing knowledge
Job Responsibility
Job Responsibility
  • Enhance Supplier Quality Culture by leading or participating in process improvement projects to further develop the quality programs and procedures - Setting our Global Partner Network up for success
  • Utilizes appropriate quality tools (lean and Sigma) to help resolve issues related to non-conformances and Customer RMA’s
  • Manages supplier related NCR/SCAR/CAR activities to ensure timely administration of activities and records
  • Ensure compliance with company policies, practices, procedures and work rules to support and maintain an AS9100-compliant Quality Management
  • Analyze non-conformance trends to evaluate effectiveness of corrective actions
  • Problem solve and follow up on troubled orders to improve supplier quality.
  • Apply engineering knowledge on supplier manufacturing to ensure quality hardware meets customer requirements
  • Assess the impact of manufactured part rejections
  • communicate with suppliers to work through problems and resolve case
  • Participate in QA and RMA Meetings (Live Reviews)
What we offer
What we offer
  • 401(k) match
  • medical, dental and vision insurance
  • life and disability insurance
  • generous paid time off including vacation, sick leave, floating and fixed holidays, maternity and bonding leave
  • EAP, other wellbeing resources
  • Fulltime
Read More
Arrow Right