Manufacturing Paint Engineer Job at CNH Industrial (Benson)

Staff Manufacturing Engineer, Paint

Archer is an aerospace company building an all-electric vertical takeoff and lan...

Location

United States , Santa Clara

Salary:

150120.00 - 166800.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor’s or advanced degree in Aerospace, Mechanical, Manufacturing, Materials Engineering or equivalent experience
5+ years hands-on experience developing and running industrial paint/coating processes in aerospace or automotive manufacturing (or combination)
Experience with both manual and automated application systems required
Demonstrated experience specifying and commissioning paint booths, pretreatment lines, ovens, robotics and paint application equipment, and managing supplier FAT/SAT
Experience with process control tools (SPC, FMEA, control plans), root-cause problem solving, and NPI-to-production ramp methodologies
Working knowledge of coating chemistries, VOC and environmental controls, and air filtration/airflow design for paint booths
Proficiency using 2D & 3D CAD to generate manufacturing layouts, assembly models, and detailed part drawings for fabrication
Strong project management, cross-functional communication, and supplier management skills
Ability to write technical specs and run technical acceptance tests
Able to maintain organization and focus in a highly dynamic environment

Job Responsibility

Lead end-to-end development of paint and coating processes (pretreatment, primer, base, clear, specialty coatings) suited to composite and metallic aircraft structures
Define paint line concepts (booths, pretreatment, ovens/cure, conveyors/handling, robotics/automation, filtration and airflow topology) and produce equipment procurement specs
Partner with Industrial Design and Design Engineering to translate aesthetic and tolerancing requirements into processable paint solutions
Work with the Materials & Processes Team to qualify coatings, surface prep requirements, chemistries, corrosion protection, and ensure compatibility with bonding/assembly processes
Manage supplier selection, technical integration, FAT/SAT, installation oversight, and handover to production
Develop control plans, work instructions, process parameters (temperature, humidity, air balance, film thickness, bake cycles), SPC charts, and poka-yoke for critical steps
Design and deploy automation where it increases throughput and consistency (robotic application, automated masking/demasking, part tracking). Balance capital vs. part-rate tradeoffs
Lead NPI-to-production qualification: pilot runs, capability studies, first-article acceptance, lessons-learned, and ramp risk management
Ensure environmental, health & safety, and permitting compliance (VOC control, filtration/waste handling, hazardous materials management) and work with EH&S and local permitting teams
Troubleshoot quality escapes, run RCAs and implement corrective/preventive actions

Fulltime

Manufacturing Engineer - Weld

As a Manufacturing Engineer – Weld, you will support the development, optimizati...

Location

United States , Batesville

Salary:

96000.00 - 132000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Welding or Industrial Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing subject areas
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
A strong mechanical and metallurgical background with a thorough knowledge of welding is preferred (GMAW, GMAW-P, RSW, GTAW)
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and implement multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency
Update/create documentation for job instructions, work instructions, and standard operating procedures
Ensure safety procedures are followed, work areas are clean and maintained, and the department is following regulatory compliance requirements

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs
commuting benefits

Fulltime

Senior Manufacturing Engineer

We are seeking a Senior Manufacturing Engineer to join a world-class heavy manuf...

Location

United Kingdom , Peterlee

Salary:

24.00 - 29.00 GBP / Hour

Randstad

Expiration Date

August 17, 2026

Requirements

A strong background in heavy manufacturing or the automotive industry
A University or technical degree in a manufacturing engineering-related discipline (or equivalent experience)
Thorough, practical knowledge of manufacturing concepts, workflows, and fabrication/assembly processes
Excellent written and verbal communication skills with the ability to mentor and coach team members
Candidates must be eligible to live and work in the UK

Job Responsibility

Develop, analyze, and manage complex Manufacturing, Fabrication, Paint, and Assembly projects
Administer the NPI process to ensure engineering drawings are released and processed on time for production builds
Lead Design for Manufacture (DFM) best practices, Lean operations, and process validation
Assist in developing department capital/expense budgets and maintaining capital forecasts
Address critical operational issues, including safety/ergonomics, process bottlenecks, and quality concerns
Coordinate the procurement, installation, and integration of new machinery, machine tools, factory control software, and complex fixtures
Provide the technical expertise necessary to design, develop, and implement complex manufacturing systems, operations, and sophisticated machinery

Fulltime

Manufacturing Engineer - Weld

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Batesville

Salary:

96000.00 - 132000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Welding or Industrial Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing subject areas
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
A strong mechanical and metallurgical background with a thorough knowledge of welding is preferred (GMAW, GMAW-P, RSW, GTAW)
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and implement multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency
Update/create documentation for job instructions, work instructions, and standard operating procedures
Ensure safety procedures are followed, work areas are clean and maintained, and the department is following regulatory compliance requirements

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Additional benefits: Flexible Spending Accounts, educational assistance programs, commuting benefits, Employee Discount Program, Employee Assistance Program (EAP), childcare benefits
Insurance coverage for basic life, accident, short-term and long-term disability, business travel accident insurance

Fulltime

Manufacturing Engineer - Weld

As a Manufacturing Engineer – Weld, you will support the development, optimizati...

Location

United States , Batesville

Salary:

96000.00 - 132000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Welding or Industrial Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing subject areas
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and implement multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Determining how a system should work and how changes in conditions, operations, and the environment will affect outcomes

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency
Update/create documentation for job instructions, work instructions, and standard operating procedures
Ensure safety procedures are followed, work areas are clean and maintained, and the department is following regulatory compliance requirements

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
Commuting benefits
Employee Discount Program

Fulltime

Sme - Mechanical, Manufacturing Design Engineer

The RL (Reality Labs) Team at Meta is helping more people around the world come ...

Location

China , Shanghai

Salary:

Not provided

Manufacturing Design Engineer

The RL (Reality Labs) Team at Meta is helping more people around the world come ...

Location

United States , Sunnyvale

Salary:

173000.00 - 245000.00 USD / Year

Manufacturing Technician - Paint / Burn-off

As a Manufacturing Technician – Paint/Burn‑Off, you will support manufacturing o...

Location

United States , Batesville

Salary:

54400.00 - 74800.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Associates degree in Engineering, Technology, Automotive, Electronics, or related technical subject area preferred and or 3 or more years of experience
Electrical and mechanical competence with a minimum of 2 years of hands-on experience repairing electromechanical systems
Medical Device or Pharma Manufacturing experience is preferred
Software proficiency (MES, ERP, Excel VBAs, LabView, etc.) desired
Familiarity with PFMEAs
Technical writing skills
Experience using precision measuring equipment
Knowledge of Calibration/Metrology process and requirements with an ability to deal with moderately complex processes and procedures
Ability to interpret technical documents including drawings, specifications, diagrams, PFMEA's
Collaboration, attention to detail and strong organizational skills

Job Responsibility

Responsible for maintaining production equipment and performing any general maintenance in order to increase production uptime
Provide a high level of problem-solving, diagnostic, and repair of plant equipment and equipment components which include: pressure gauges, flow meters, pneumatic circuits, valves, label printers, and other production equipment
Using hand tools, reassemble instruments and replace components as needed Communicate status of open issues
Serve as a technical resource on metrology issues and assist with development and implementation of technically defensible calibration procedures
Coordinate calibration and preventative maintenance activities and maintain records to ensure proper documentation
interpret calibration results and troubleshoot any issues related to calibration
Work with calibration vendors for on-site and off-site calibrations, equipment repairs, and purchasing
Test equipment set-up and validations (IQs, OQs, PQs)
Participate in new product introduction, setting up new production areas
Collaborate with Engineering as needed. Assist in writing new or revised Standard Operating Procedures and Work Instructions

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs

Fulltime

Select Country

Manufacturing Paint Engineer

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?