Manufacturing engineering technician Jobs

Manufacturing Engineering Technician

As a member of the Manufacturing Engineering team, the Engineering Technician wi...

Location

United States , Manchester

Salary:

24.00 - 25.00 USD / Hour

Connexion Systems & Engineering, Inc

Expiration Date

Until further notice

Requirements

Associates Degree in Engineering, Mechatronics or other technical field
1+ years’ experience in technical, hands-on problem solving role in a highly regulated environment, medical preferred
Demonstrated, hands-on skills with electrical, mechanical, pneumatic or hardware troubleshooting
Knowledge and ability to read blueprints, drawings
Experience with Lean and/or structured problem solving tools
Demonstrated skills to provide basic data analysis and reporting
Demonstrated skills with MS Office applications
Superior verbal and written communication skills
Excellent interpersonal skills
Ability to manage multiple priorities daily

Job Responsibility

Act as accountable technical team member for process yield performance for a limited production area
Provide hands-on technical support to operations for manufacturing issues directly within a clean-room environment
Support and facilitate productivity and throughput improvement projects to achieve target process run rates
Perform hands-on failure analysis and investigation to process nonconformities
Report-out to production line team on details of technical investigation through clear, thorough and specific documented feedback
Work with engineering team resources to develop and implement process improvement projects
Design, develop and fabricate simple manufacturing tools, fixtures and devices
Collaborate with vendors, suppliers and other company team members for engineering projects
Support the execution of change-management process elements including validation documentation, process work instructions, engineering studies and other technical writing

Fulltime

Manufacturing Engineering Technician

As a member of the Manufacturing Engineering team, the Engineering Technician wi...

Location

United States , Manchester

Salary:

24.00 - 25.00 USD / Hour

Connexion Systems & Engineering, Inc

Expiration Date

Until further notice

Requirements

Associates Degree in Engineering, Mechatronics or other technical field
1+ years’ experience in technical, hands-on problem solving role in a highly regulated environment, medical preferred
Demonstrated, hands-on skills with electrical, mechanical, pneumatic or hardware troubleshooting
Knowledge and ability to read blueprints, drawings
Experience with Lean and/or structured problem solving tools
Demonstrated skills to provide basic data analysis and reporting
Demonstrated skills with MS Office applications
Superior verbal and written communication skills
Excellent interpersonal skills
Ability to manage multiple priorities daily

Job Responsibility

Provide direct technical support to the Production Operations and Manufacturing Engineering teams within daily business operations
Act as accountable technical team member for process yield performance for a limited production area
Provide hands-on technical support to operations for manufacturing issues directly within a clean-room environment
Support and facilitate productivity and throughput improvement projects to achieve target process run rates
Perform hands-on failure analysis and investigation to process nonconformities
Report-out to production line team on details of technical investigation through clear, thorough and specific documented feedback
Work with engineering team resources to develop and implement process improvement projects
Design, develop and fabricate simple manufacturing tools, fixtures and devices
Collaborate with vendors, suppliers and other company team members for engineering projects
Support the execution of change-management process elements including validation documentation, process work instructions, engineering studies and other technical writing

Fulltime

Electric Engine Manufacturing Technician

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

35.54 - 50.00 USD / Hour

Archer Aviation

Expiration Date

Until further notice

Requirements

Associate's Degree, or 5+ years in manufacturing industry
Experience in an R&D or early production environment
Direct hands-on build experience with mechanical and electronic assemblies using technical documentation
High workmanship standards
Ability to follow formal build instructions and document deviations
Excellent documentation and written communication
proficient using Microsoft Office
Basic knowledge of drafting standards (read and interpret mechanical and electrical drawings) to produce parts and assemblies
Experience using measurement and inspection (caliper, micrometer, height gauges, CMM…)
Familiarity with 5S or similar workplace organization methods

Job Responsibility

Work closely with the engineering teams to support equipment bring-up and process validation
Use manual, semi-automated, and automated equipment to build electric engines which includes inverters, stators, gearboxes, and motors
Troubleshoot equipment and processes
Debug electric engines
Build basic lab fixtures and tools
Perform routine maintenance on equipment
Perform inspections and measurements of product dimensions using basic metrology tools, (calipers, micrometer, depth gauges, measurement microscope, etc…)

Fulltime

New

Engineering Technician

Seeking an Engineering Technician with Electrical or Mechanical background for a...

Location

United States , Troy, Michigan

Salary:

Not provided

GlobalEdge Technologies

Expiration Date

Until further notice

Requirements

Electrical or Mechanical skills, Some electronics knowledge
PLC, Windows based systems
PC literate Windows, Excel, Word , PPT etc
Ability to work on plant machines, diagnose, repair, maintenance, document etc
Eager and willing to learn and ability to adapt to new challenges
Good typing, word processing and communication skills
Knowledge of plant manufacturing operations
Ability to work well with others with minimum supervision
Effective problem solving ability and hands on
High School Diploma

Job Responsibility

Assist engineers with a focus on post-development activities like processes, application implementation or operation
Assisting engineers with process improvements, testing studies, capability studies, documentation, machine trials, First Time Pass Rate (FTPR) improvements etc
Identify & capture all machine issues (mechanical or software failures, faults, etc)
Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol
Maintain the inventory records for equipment and supplies
Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level
anticipating needed equipment, parts, and supplies
placing and expediting orders
verifying receipt
Ensures that all work performed meets required codes (OSHA, City and Federal) and is in accordance with plant policies and procedures

Fulltime

Manufacturing Engineer

As a Manufacturing Engineer at 1X, you will be a hands‑on technical leader respo...

Location

United States , Hayward

Salary:

90000.00 - 165000.00 USD / Year

1X Technologies

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Mechatronics, Manufacturing Engineering, or related field
Minimum of 2 years of experience in manufacturing engineering, especially involving precision mechanical or electromechanical assemblies
Experience with CAM programming, fixture/tooling design, precision machining of metals or composites
Strong understanding of design for manufacturability (DFM) and experience integrating electromechanical systems
Familiarity with measurement techniques and standards such as GD&T, tolerance stack analysis, CMM or other high‑precision inspection methods
Solid collaboration skills across engineering disciplines, supply chain, QA, and production teams
Experience producing robotic actuators, joints, or other motion control systems
Exposure to high‑mix, low‑volume environments with frequent design iteration
Knowledge or experience with lean manufacturing, Six Sigma, continuous improvement strategies
Proficiency with CAD tools, PLM/ERP systems, and manufacturing documentation

Job Responsibility

Develop and refine manufacturing processes for robotic mobility and control components such as actuators, drive units, precision components, motor housings, and skeletal structures
Oversee full manufacturing workflows including fixture design, CAM programming, selection of cutting tools, and inspection/validation methods
Deploy automation and lights‑out machining strategies to enable continuous production with minimal human intervention
Drive process improvements to reduce cycle time, increase first‑pass yield, and improve reliability of robot hardware
Collaborate with design engineering on part geometry, materials, and design changes to ensure manufacturability at every stage
Manage change releases and product design revisions into production, focusing on scalability and consistency
Act as technical liaison between design, machining, assembly, and quality teams for owned components
Support build technicians and operators, maintain work instructions and operating procedures in up‑to‑date state
Implement statistical process control (SPC) and quality monitoring practices, take ownership of part or part family quality metrics
Troubleshoot production issues such as tolerance stack‑ups, tool wear, misalignment, and assembly variability

What we offer

Health, dental, and vision insurance
401(k) with company match
Paid time off and holidays

Fulltime

Manufacturing Technician

Works independently and with engineers in the development and improvement of the...

Location

United States , Aguadilla

Salary:

Not provided

Hewlett Packard Enterprise

Expiration Date

Until further notice

Requirements

Associate's degree or equivalent experience and/or 1-2 years related experience
Basic knowledge in the field of electro mechanical technology
Accountability
Active Learning
Active Listening
Bias
Business
Circuit Boards
Coaching
Creativity

Job Responsibility

Works independently and with engineers in the development and improvement of the manufacturing process
Collects and analyzes data relating to the manufacturing process and/or manufacturing equipment
Reads and interprets plans and schematics relating to the manufacturing process
Operates machines as needed to complete direct assembly
Supports factory equipment and its related processes
Maintains related documentation and incorporates changes throughout the manufacturing systems
Operates assembly equipment in the factory
Programs/debugs manufacturing equipment as needed
May conduct training classes relating to manufacturing equipment and procedures/processes
Covers critical responsibilities such as hardware test development, systems management, and providing technical support

What we offer

Comprehensive suite of benefits that supports physical, financial and emotional wellbeing
Programs catered to helping you reach any career goals
Flexibility to manage work and personal needs
Celebrates individual uniqueness and inclusion
Equal opportunity employer

Fulltime

Senior Engineer, Weld Manufacturing

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United States , Batesville

Salary:

88000.00 - 121000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing disciplines
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Provide technical expertise or support related to manufacturing
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Work with Quality Control on reducing the NCMRs
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP)
Flexible Spending Accounts

Fulltime

Senior Engineer, Weld Manufacturing

The Senior Engineer, Weld Manufacturing at Baxter plays a critical role in impro...

Location

United States , Batesville, Indiana

Salary:

88000.00 - 121000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing disciplines
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Provide technical expertise or support related to manufacturing
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Work with Quality Control on reducing the NCMRs
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Manufacturing engineering technician

Randstad

Location:
India , Sriperumbudur

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
December 26, 2025

Expiration:
January 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Manufacturing engineering technician

Manufacturing Engineering Technician

Manufacturing Engineering Technician

Electric Engine Manufacturing Technician

Engineering Technician

Manufacturing Engineer

Manufacturing Technician

Senior Engineer, Weld Manufacturing

Senior Engineer, Weld Manufacturing

Manufacturing engineering technician

Randstad

Location:India , Sriperumbudur

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:December 26, 2025

Expiration:January 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Manufacturing engineering technician

Manufacturing Engineering Technician

Manufacturing Engineering Technician

Electric Engine Manufacturing Technician

Engineering Technician

Manufacturing Engineer

Manufacturing Technician

Senior Engineer, Weld Manufacturing

Senior Engineer, Weld Manufacturing

Location:
India , Sriperumbudur

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
December 26, 2025

Expiration:
January 19, 2026