Manufacturing Engineering Technician - 1st Shift Job at Trane Technologies (Grand Rapids)

Maintenance Technician - 1st Shift

This position is responsible for maintaining plant’s food manufacturing equipmen...

Location

United States , Toluca

Salary:

Not provided

Ajinomoto Foods North America, Inc.

Expiration Date

Until further notice

Requirements

Associate Degree or other technical degree in Electrical Engineering, Mechanical Engineering or Technology or the equivalent combination of education and experience
1-3 years of proven work experience on electrical/electronic systems, mechanical systems, hydraulic and pneumatic systems is required with the ability to demonstrate high proficiency in these areas
Functional knowledge of standard manufacturing practices including, but not limited to: general safety, lock-out tag-out, forklift safety, ARC Flash and electrostatic discharge awareness
Electrical skills in troubleshooting and repairing 480/230 v 3ph.120 v and 24v systems with the ability to read and understand schematics, blue prints and PLC ladder logic
Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators in order to assist with repairs and troubleshooting
Must possess a high level of written and verbal communication skills, critical thinking and problem solving skills
Must have working knowledge of testing equipment and devices including the use of Multi-meter, Thermal imaging camera, and basic hand and power tools
Experience and ability to work in a fast-paced manufacturing environment
Basic computer skills is required (Microsoft windows, MS Office Suite and outlook email)
Welding and fabrication experience is a plus

Job Responsibility

Maintains, troubleshoots and repairs various production equipment systems and devices and performs regular preventive maintenance as planned
Performs regular equipment checks and completes the required predictive checklists to identify early signs of potential equipment failures and minimize unplanned downtime and identify opportunities for improvement
Collaborate within the immediate supervisor and maintenance planner to schedule and develop inspection routines and preventative maintenance schedules
Performs new installations and relocations of new/existing equipment, regular and emergency startups and shutdowns of equipment in accordance with company standard operating procedures and safety requirements
Assist Team Leaders and line Operators in efficient line start up and equipment adjustments
Assist other maintenance department staff with technical troubleshooting
Keeps supervisor and/or manager up to date on all on-going work assignments, provides consistent updates in regards to project status, completion time projections, and any problems that may have arisen during the course of the project
Performs high quality work that meets industry accepted maintenance practices to maintain compliance with external regulatory agencies
Continues to develop maintenance technical skills within mechanical, electrical, controls, hydraulic, pneumatic, welding and fabrication skillset
Increases equipment specific knowledge for maintenance activities on factory equipment such as cook kettles, pumps, mixers, food formers, ovens, fillers, food assembly equipment, fryers, primary packaging equipment such as wrappers, secondary packaging equipment such as formers and closers, metal detectors and palletizing equipment

Fulltime

Equipment Repair/Maintenance Technician - 1st Shift

Location

United States , Andover

Salary:

54000.00 - 65000.00 USD / Year

Vicor Corp.

Expiration Date

Until further notice

Requirements

Associate's degree in electro-mechanical / electronic engineering or equivalent required
Self-motivated, hands on technician who can work well within a team environment
Possess a high sense of urgency and the ability to work with limited supervision
Minimum of 5 years of experience directly supporting production line equipment and systems
Must have proven success in identifying, troubleshooting and performing repairs of equipment with problems of a mechanical or electrical nature
Demonstrated understanding of manufacturing processes and principles
Ability to train and mentor manufacturing personnel, and other engineering aide/maintenance technician
Experience developing work instructions
Must have strong mechanical system understanding aptitude and a working knowledge of pneumatics elements
Demonstrated electrical trouble shooting skills and ability to read electrical schematic

Job Responsibility

Perform scheduled maintenance and unscheduled repairs on BBU production and test equipment
Provide continuous technical support to production operators
Train and evaluate operators on process and equipment knowledge
Responsible for maintaining and purchasing spare parts, and supplies inventories
determining inventory levels, anticipating needed equipment, parts, and supplies
verifies receipt of such
Prepares maintenance reports by collecting, analyzing, and summarizing information and trends
Works to improve
debug and optimize setups & change over
Will work to ensure that the area of responsibility fully utilizes the equipment’s capacity

Fulltime

Sr Lead Controls Engineer - 1st Shift

We are seeking a Senior Lead Controls Engineer to support a high-volume transmis...

Location

United States , Huntsville

Salary:

Not provided

Lorien

Expiration Date

Until further notice

Requirements

Bachelor's degree with 5+ years manufacturing experience and 1+ year in a lead role, or Master's degree with 3+ years manufacturing experience and 1+ year in a lead role, or 8+ years manufacturing experience with 1+ year in a lead role
Must be authorized to work in the U.S. (no sponsorship available)

Job Responsibility

Improve equipment uptime and resolve manufacturing process issues
Provide cross-functional controls troubleshooting support
Design, program, and implement industrial automation systems
Develop and modify Siemens PLC logic, HMI, and SCADA systems
Diagnose control system issues to reduce downtime
Create and maintain technical documentation
Specify and support manufacturing equipment installation, upgrades, and maintenance
Analyze equipment performance and reliability
Provide technical guidance to maintenance and engineering teams
Mentor and support less-experienced engineers and technicians

Fulltime

Operator V - 1st Shift (7:00am - 3:00pm)

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Cleveland

Salary:

Not provided

Baxter

Expiration Date

Until further notice

Requirements

High school diploma required
Additional technical experience, training, or education a plus
Ability to read, write, count, use calculator and maintenance tools
Prior machine operating experience preferred
Minor troubleshooting ability preferred
Basic computer skills required
Must be able to operate a forklift and/or be trained to do so
Ability to lift, push, pull up to 50 pounds
Ability to stand for long periods of time
Audiometric testing and hearing protection required

Job Responsibility

Must perform functions for the production of Plastic Pour Bottle Blow Molding (Sidel)
Must operate Haumiller Gasket Machine and inspect bottle and gasket assembly
Responsible for start-up and readiness of machine and support equipment prior to production
Responsible for monitoring equipment and performing minor adjustments during production
Must be able to troubleshoot minor mechanical and electrical problems on equipment
Must be able to perform all duties associated with the operation
Understand and ensure all SOPs, GMPs and safety regulations are followed
Perform and document line clearances
Must verify correctness of material
Must perform general housekeeping duties

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

Final Inspection Technician

This is where you make a difference in our patients’ safety. As a member of the ...

Location

United States , Batesville

Salary:

43200.00 - 54000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma/GED minimum educational requirement
Associate Degree in a Technical subject area preferred
2 years technical experience or equivalent combination of education/work experience in a specific technical field
Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
Good organizational skills and basic math skills
Knowledge of basic wiring metrology methods, and ability to read blueprints
Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
Must be flexible to support team and be able to work 1st or 2nd shift
Applicants must be authorized to work for an employer in the U.S.

Job Responsibility

Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
Conduct final inspection of completed product
Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
Give presentations to visitors as the need arises
Maintain production inspection reports in a timely manner
Analyze returned products for cause of failure and assist in repair of defective products
Work with line support workers to address material non conformances
Participate in lean manufacturing projects for improvement in quality, cost, and delivery
Monitor inventory levels of DVM parts to prevent shut down of production
Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
2 Days a Year to Volunteer

Fulltime

Final Inspection Technician

This is where you make a difference in our patients’ safety. As a member of the ...

Location

United States , Batesville

Salary:

43200.00 - 54000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma/GED minimum educational requirement
Associate Degree in a Technical subject area preferred
2 years technical experience or equivalent combination of education/work experience in a specific technical field
Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
Good organizational skills and basic math skills
Knowledge of basic wiring metrology methods, and ability to read blueprints
Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
Must be flexible to support team and be able to work 1st or 2nd shift
Applicants must be authorized to work for an employer in the U.S.
We are unable to sponsor or take over sponsorship of an employment visa at this time.

Job Responsibility

Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
Conduct final inspection of completed product
Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
Give presentations to visitors as the need arises
Maintain production inspection reports in a timely manner
Analyze returned products for cause of failure and assist in repair of defective products
Work with line support workers to address material non conformances
Participate in lean manufacturing projects for improvement in quality, cost, and delivery
Monitor inventory levels of DVM parts to prevent shut down of production
Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off

Fulltime

Final Inspection Technician

As a Final Inspection Technician you will perform visual inspections and conduct...

Location

United States , Batesville

Salary:

43200.00 - 54000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma/GED minimum educational requirement
Associate Degree in a Technical subject area preferred
2 years technical experience or equivalent combination of education/work experience in a specific technical field
Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
Good organizational skills and basic math skills
Knowledge of basic wiring metrology methods, and ability to read blueprints
Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
Must be flexible to support team and be able to work 1st or 2nd shift
Applicants must be authorized to work for an employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time

Job Responsibility

Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
Conduct final inspection of completed product
Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
Give presentations to visitors as the need arises
Maintain production inspection reports in a timely manner
Analyze returned products for cause of failure and assist in repair of defective products
Work with line support workers to address material non conformances
Participate in lean manufacturing projects for improvement in quality, cost, and delivery
Monitor inventory levels of DVM parts to prevent shut down of production
Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
2 Days a Year to Volunteer

Final Inspection Technician

As a Final Inspection Technician you will perform visual inspections and conduct...

Location

United States , Batesville

Salary:

43200.00 - 54000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma/GED minimum educational requirement
Associate Degree in a Technical subject area preferred
2 years technical experience or equivalent combination of education/work experience in a specific technical field
Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
Good organizational skills and basic math skills
Knowledge of basic wiring metrology methods, and ability to read blueprints
Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
Must be flexible to support team and be able to work 1st or 2nd shift
Applicants must be authorized to work for an employer in the U.S.

Job Responsibility

Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
Conduct final inspection of completed product
Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
Give presentations to visitors as the need arises
Maintain production inspection reports in a timely manner
Analyze returned products for cause of failure and assist in repair of defective products
Work with line support workers to address material non conformances
Participate in lean manufacturing projects for improvement in quality, cost, and delivery
Monitor inventory levels of DVM parts to prevent shut down of production
Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Select Country

Manufacturing Engineering Technician - 1st Shift

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?