Manufacturing Engineer Job at Morson Talent (Belfast)

Director of Engineering (Manufacturing)

We are seeking a skilled Director of Engineering (Manufacturing) to join our gro...

Location

United States , Gunnison

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering (Mechanical, Industrial, or Manufacturing preferred
Master’s preferred)
Over 10 years of experience building and leading engineering teams in a manufacturing environment
Strong Program Management skills in handling complex multi-stakeholder projects
Able to balance leadership with hands-on engineering problem-solving
Expertise in process optimization, lean manufacturing, and advanced manufacturing systems
Proven innovation and efficiency achievements within manufacturing
Exceptional interpersonal and communication skills, with the ability to collaborate effectively
Willingness to relocate to Gunnison, Utah and work onsite

Job Responsibility

Lead, mentor, and manage a Manufacturing Engineering team to foster collaboration and continuous improvement
Develop and implement engineering strategies aligned with business goals for manufacturing process efficiency
Recruit engineering talent and promote professional development to grow the team
Manage cross-functional programs, ensuring they meet timelines and budgets while minimizing risks
Provide hands-on engineering support for critical projects and process optimizations
Implement best practices to enhance production workflows and improve product quality
Integrate cutting-edge manufacturing technologies to boost operational effectiveness
Collaborate with design, operations, supply chain, and quality teams for seamless development
Manage department budgets, resource planning, and capital projects
Ensure engineering compliance with company policies, regulations, and safety standards

What we offer

medical
vision
dental
life and disability insurance
401(k) plan

Fulltime

Engineer / Sr Engineer, Manufacturing Sciences & Technology (mRNA/LNP)

Beam is looking for a highly motivated Engineer/Senior Engineer to join our grow...

Location

United States , Cambridge, MA

Salary:

100000.00 - 135000.00 USD / Year

Beam Therapeutics

Expiration Date

Until further notice

Requirements

Ph.D. in Chemical Engineering, Bioengineering, Biochemistry, or equivalent with minimum 6 years of relevant work experience
M.S. degree with a minimum of 8 years of relevant work experience
B.S. degree with a minimum 10 years of relevant work experience
Demonstrated experience in technology transfer, scale-up, and implementation of downstream unit operations, such as tangential flow filtration, normal flow filtration, and chromatography
Experience in executing Process Validation lifecycle approach
i.e. process design, PPQ, and CPV
Experience in leading cross-functional teams for non-conformance event investigations, Root Cause Analyses (RCAs), and CAPAs
Outstanding written, verbal, and presentation skills
ability to communicate strategies, plans, and results to a diverse audience
Ability to simultaneously manage multiple projects and priorities and adjust quickly to dynamic situations

Job Responsibility

Supports MS&T activities related to mRNA and LNP programs
Supports the technology transfer and implementation of mRNA and LNP GMP manufacturing processes, collaborates with sending and receiving site cross-functional team members
Supports bulk drug substance and bulk drug product manufacturing across the full product lifecycle, including process design, process performance qualification (PPQ), commercial production, and continued process verification (CPV)
Authors technical documentation, including technology transfer plans, facility fit and gap analysis reports, manufacturing study protocols and reports, and risk assessments
Supports equipment design to meet process needs and compliance/regulatory expectations
supports Engineering and Validation departments with subsequent procurement, qualification, and GMP readiness
Supports regulatory submissions, responses, on-site audits, and inspections
Represents MS&T in cross-functional teams related to mRNA/LNP programs and manufacturing operations
Provides person-in-plant (PIP) support in manufacturing at Beam Durham
Supports MS&T lab and non-GMP analytical testing of in-process intermediates, as needed

Fulltime

Manufacturing Engineer

The successful candidate will play a crucial role in improving manufacturing pro...

Location

United States , Riverside

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Minimum of 3 years of experience as a Manufacturing Engineer or in a similar role
Proficiency in Mechanical Assembly, Mechanical Design, and Mechanical Components
Experience with Mechanical Drawings and Mechanical Engineering
Familiarity with Mechanical Equipment and Mechanical Systems
Skilled in Welding and Welding Inspection
Knowledge of Semiconductor Fabrication and Lean Manufacturing
Experience in Manufacturing, Manufacturing Assembly, and Manufacturing Engineering
Understanding of Manufacturing Equipment and Manufacturing Practices
Familiarity with ASME Y14.5 and ISO Standards
Proven experience in Quality Control, Equipment Calibration, and Equipment Maintenance

Job Responsibility

Develop, implement and manage a comprehensive facility weld program in line with company standards
Optimize welding operations and drive manufacturing improvements to enhance productivity and safety
Oversee the site weld program, including WPS/PQR, Welder Certifications, and equipment automation programs
Provide technical support and troubleshooting for various welding processes such as MIG, TIG, and others
Collaborate with Quality Control to ensure welding processes adhere to industry standards and customer specifications
Lead the design, implementation, and improvement of manufacturing projects related to welding and fabrication
Train production staff on proper welding techniques, equipment operation, and best practices
Work closely with Sales Administration to understand and meet customer welding requirements
Create and maintain technical documentation, including work instructions, process sheets, and project reports
Recommend, procure, and oversee the maintenance of welding equipment and tools

What we offer

medical, vision, dental, and life and disability insurance
eligibility to enroll in company 401(k) plan

Fulltime

Lead Manufacturing Engineer

A Manufacturing Engineer V will drive the development of world-class manufacturi...

Location

United States , Aurora

Salary:

130.00 - 155.00 USD / Year

RK Mechanical, Inc.

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Manufacturing, Mechanical, or Industrial Engineering (or related technical discipline)
15+ years of experience in manufacturing or process engineering, ideally within modular, prefabricated, or complex electromechanical assembly environments
Proven expertise in lean manufacturing, continuous improvement, and workstation optimization
Deep knowledge of workstation design principles, line layout and ergonomics
Strong knowledge and experience with ERP systems for production tracking, routing and process control
Strong skills in process development, documentation and standardization
Strong command of DFM/DFMA methodologies, GD&T, and engineering drawing standards
Expert experience reviewing and refining shop drawing content to ensure alignment with production layouts and build sequencing
Proficiency in CAD tools for concept development, equipment & tooling design
Exceptional collaboration and communication skills for cross-functional project execution

Job Responsibility

Partner with Design Engineering to identify and eliminate Design for Manufacturability and Assembly (DFM/DFMA) risks during the product development phase, ensuring smooth hand-off to production
Design, optimize, and document robust assembly, integration, and testing processes for modular electrical and power infrastructure products
Provide expert-level feedback on shop drawing structure and content, ensuring alignment with physical workstation design, build sequencing, and production orders
Develop and implement tooling, fixtures, jigs, and material-handling systems to improve safety, reduce waste, and support standardized operations
Own the manufacturing bill of materials (BOM), routings, and workstation sequencing in the ERP system to enable repeatable, high-quality production
Champion lean manufacturing initiatives, including value stream mapping, standard work documentation, and continuous flow principles
Develop and maintain detailed manufacturing process documentation, including clear, visual work instructions, process control plans, and process validation records
Collaborate with Quality, Operations, and Supply Chain teams to improve First Pass Yield (FPY), reduce non-conformance cost, shorten cycle times, and lower overall production cost
Drive root cause analysis using DMAIC, 8D, or equivalent structured methodologies for complex production issues

What we offer

Competitive benefits to support your growth and well-being
Hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, as well as an accredited apprentice program

Fulltime

Manufacturing Engineer

As a Manufacturing Engineer at 1X, you will be a hands‑on technical leader respo...

Location

United States , Hayward

Salary:

90000.00 - 165000.00 USD / Year

1X Technologies

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Mechatronics, Manufacturing Engineering, or related field
Minimum of 2 years of experience in manufacturing engineering, especially involving precision mechanical or electromechanical assemblies
Experience with CAM programming, fixture/tooling design, precision machining of metals or composites
Strong understanding of design for manufacturability (DFM) and experience integrating electromechanical systems
Familiarity with measurement techniques and standards such as GD&T, tolerance stack analysis, CMM or other high‑precision inspection methods
Solid collaboration skills across engineering disciplines, supply chain, QA, and production teams
Experience producing robotic actuators, joints, or other motion control systems
Exposure to high‑mix, low‑volume environments with frequent design iteration
Knowledge or experience with lean manufacturing, Six Sigma, continuous improvement strategies
Proficiency with CAD tools, PLM/ERP systems, and manufacturing documentation

Job Responsibility

Develop and refine manufacturing processes for robotic mobility and control components such as actuators, drive units, precision components, motor housings, and skeletal structures
Oversee full manufacturing workflows including fixture design, CAM programming, selection of cutting tools, and inspection/validation methods
Deploy automation and lights‑out machining strategies to enable continuous production with minimal human intervention
Drive process improvements to reduce cycle time, increase first‑pass yield, and improve reliability of robot hardware
Collaborate with design engineering on part geometry, materials, and design changes to ensure manufacturability at every stage
Manage change releases and product design revisions into production, focusing on scalability and consistency
Act as technical liaison between design, machining, assembly, and quality teams for owned components
Support build technicians and operators, maintain work instructions and operating procedures in up‑to‑date state
Implement statistical process control (SPC) and quality monitoring practices, take ownership of part or part family quality metrics
Troubleshoot production issues such as tolerance stack‑ups, tool wear, misalignment, and assembly variability

What we offer

Health, dental, and vision insurance
401(k) with company match
Paid time off and holidays

Fulltime

Senior Engineer, Weld Manufacturing

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United States , Batesville

Salary:

88000.00 - 121000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing disciplines
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Provide technical expertise or support related to manufacturing
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Work with Quality Control on reducing the NCMRs
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP)
Flexible Spending Accounts

Fulltime

Senior Engineer, Weld Manufacturing

The Senior Engineer, Weld Manufacturing at Baxter plays a critical role in impro...

Location

United States , Batesville, Indiana

Salary:

88000.00 - 121000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing disciplines
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Provide technical expertise or support related to manufacturing
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Work with Quality Control on reducing the NCMRs
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Manufacturing Engineer

The Manufacturing Engineer will support the development, optimisation, and execu...

Location

United Kingdom , Farnborough

Salary:

32.24 - 43.13 GBP / Hour

Morson Talent

Expiration Date

June 30, 2026

Requirements

Manufacturing or process engineering experience within assembly, automotive, or aerospace environments
Ability to read, interpret, and critique manufacturing processes and instructions
Strong attention to detail and structured approach to process review
Experience creating or editing Process Instructions, ERPs setups, and routings
Practical background in manufacturing assembly environments
Experience with ERP/PLM systems and data setup
Competent in identifying and implementing process improvements
Experience using RCCA methodology
Ability to work independently and collaboratively with cross-functional teams

Job Responsibility

Create, review, and update Process Instructions (PIs) and shop-floor documentation
Review end-to-end manufacturing processes and identify opportunities for improvement
Set up and manage ERP/PLM routings, BoMs, and system data
Provide hands-on support to assembly activities and ensure design intent is translated into efficient production processes
Identify and specify tooling to support process optimisation
Apply RCCA and problem-solving methodologies to production issues
Contribute to continuous improvement, right-first-time culture, and manufacturing efficiency targets
Support procurement, supply chain activities, and Make vs Buy assessments
Liaise with tooling, facilities, and production engineering teams to enable robust manufacturing capability

What we offer

holiday pay

Fulltime

Manufacturing Engineer

Morson Talent

Location:
United Kingdom , Belfast

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Manufacturing Engineer

Director of Engineering (Manufacturing)

Engineer / Sr Engineer, Manufacturing Sciences & Technology (mRNA/LNP)

Manufacturing Engineer

Lead Manufacturing Engineer

Manufacturing Engineer

Senior Engineer, Weld Manufacturing

Senior Engineer, Weld Manufacturing

Manufacturing Engineer

Manufacturing Engineer

Morson Talent

Location:United Kingdom , Belfast

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Manufacturing Engineer

Director of Engineering (Manufacturing)

Engineer / Sr Engineer, Manufacturing Sciences & Technology (mRNA/LNP)

Manufacturing Engineer

Lead Manufacturing Engineer

Manufacturing Engineer

Senior Engineer, Weld Manufacturing

Senior Engineer, Weld Manufacturing

Manufacturing Engineer

Location:
United Kingdom , Belfast

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 05, 2026