CrawlJobs Logo

Manufacturing Engineer

amd.com Logo

AMD

Location Icon

Location:
United States , Austin

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Employment contract

Salary Icon

Salary:

116880.00 - 175320.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

This Manufacturing Engineering position focuses on PCBA and Server System Assembly, supporting both the introduction of new products and the ongoing production of existing ones at our Contract Manufacturer (CM) sites. The role is critical to advancing AMD’s assembly capabilities, particularly for our expanding portfolio of Machine Learning and Artificial Intelligence products. Success in this position requires applying innovative approaches and industry best practices to establish robust manufacturing processes, drive continuous yield improvements, and ensure timely product launches. The engineer will serve as a key technical liaison between internal teams and external manufacturing partners.

Job Responsibility:

  • Lead the implementation of PCBA and automated assembly processes for both new product introduction (NPI) and high-volume production
  • Drive ODM/CEM partners to meet quality and yield targets
  • Develop, document, and maintain operational procedures for AMD and manufacturing partners
  • Design and optimize efficient assembly workflows, including methods, materials, and detailed work instructions
  • Lead engineering meetings and manage cross-functional technical projects
  • Own product lifecycle management from NPI through end-of-life (EOL), addressing manufacturability, cost, and efficiency improvements
  • Provide Design for Manufacturing (DFM) input to engineering teams to enhance product design and reduce costs
  • Support failure analysis for production components, assemblies, and field returns
  • Lead and contribute to continuous improvement initiatives focused on cost reduction, capacity expansion, and supply chain optimization
  • Participate in audits at ODM/CEM sites to ensure process compliance and drive yield improvements
  • Act as the primary liaison between AMD teams and manufacturing partners to resolve yield and process issues
  • Foster strong working relationships across internal teams and external partners
  • Adapt to evolving products, suppliers, and responsibilities in a dynamic environment
  • Travel to support external sites and partners as needed

Requirements:

  • Strong verbal and written communication skills in English
  • DFX experience
  • Certifications or training in Control Plans, PFMEA, APQP, IPC standards, and environmental compliance
  • Familiarity with SMT PCBA assembly processes
  • Experience presenting technical content to senior management
  • Proficiency in process management techniques such as Gage R&R, Six Sigma, and Lean Manufacturing
  • Skilled in Microsoft Office applications (Word, Excel, PowerPoint, etc.)
  • Experience preparing and maintaining ISO documentation
  • Background in automation and robotics is a plus
  • Proven ability to manage suppliers and cross-functional teams under tight deadlines
  • Experience working with geographically distributed engineering and manufacturing teams
  • BS Degree or higher preferred

Nice to have:

Background in automation and robotics is a plus

What we offer:

AMD benefits at a glance

Additional Information:

Job Posted:
May 05, 2026

Employment Type:
Fulltime
Work Type:
Hybrid work
Icon
AMD - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Manufacturing Engineer

Director of Engineering (Manufacturing)

We are seeking a skilled Director of Engineering (Manufacturing) to join our gro...
Location
Location
United States , Gunnison
Salary
Salary:
Not provided
https://www.roberthalf.com Logo
Robert Half
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering (Mechanical, Industrial, or Manufacturing preferred
  • Master’s preferred)
  • Over 10 years of experience building and leading engineering teams in a manufacturing environment
  • Strong Program Management skills in handling complex multi-stakeholder projects
  • Able to balance leadership with hands-on engineering problem-solving
  • Expertise in process optimization, lean manufacturing, and advanced manufacturing systems
  • Proven innovation and efficiency achievements within manufacturing
  • Exceptional interpersonal and communication skills, with the ability to collaborate effectively
  • Willingness to relocate to Gunnison, Utah and work onsite
Job Responsibility
Job Responsibility
  • Lead, mentor, and manage a Manufacturing Engineering team to foster collaboration and continuous improvement
  • Develop and implement engineering strategies aligned with business goals for manufacturing process efficiency
  • Recruit engineering talent and promote professional development to grow the team
  • Manage cross-functional programs, ensuring they meet timelines and budgets while minimizing risks
  • Provide hands-on engineering support for critical projects and process optimizations
  • Implement best practices to enhance production workflows and improve product quality
  • Integrate cutting-edge manufacturing technologies to boost operational effectiveness
  • Collaborate with design, operations, supply chain, and quality teams for seamless development
  • Manage department budgets, resource planning, and capital projects
  • Ensure engineering compliance with company policies, regulations, and safety standards
What we offer
What we offer
  • medical
  • vision
  • dental
  • life and disability insurance
  • 401(k) plan
  • Fulltime
Read More
Arrow Right

Engineer / Sr Engineer, Manufacturing Sciences & Technology (mRNA/LNP)

Beam is looking for a highly motivated Engineer/Senior Engineer to join our grow...
Location
Location
United States , Cambridge, MA
Salary
Salary:
100000.00 - 135000.00 USD / Year
beamtx.com Logo
Beam Therapeutics
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Ph.D. in Chemical Engineering, Bioengineering, Biochemistry, or equivalent with minimum 6 years of relevant work experience
  • M.S. degree with a minimum of 8 years of relevant work experience
  • B.S. degree with a minimum 10 years of relevant work experience
  • Demonstrated experience in technology transfer, scale-up, and implementation of downstream unit operations, such as tangential flow filtration, normal flow filtration, and chromatography
  • Experience in executing Process Validation lifecycle approach
  • i.e. process design, PPQ, and CPV
  • Experience in leading cross-functional teams for non-conformance event investigations, Root Cause Analyses (RCAs), and CAPAs
  • Outstanding written, verbal, and presentation skills
  • ability to communicate strategies, plans, and results to a diverse audience
  • Ability to simultaneously manage multiple projects and priorities and adjust quickly to dynamic situations
Job Responsibility
Job Responsibility
  • Supports MS&T activities related to mRNA and LNP programs
  • Supports the technology transfer and implementation of mRNA and LNP GMP manufacturing processes, collaborates with sending and receiving site cross-functional team members
  • Supports bulk drug substance and bulk drug product manufacturing across the full product lifecycle, including process design, process performance qualification (PPQ), commercial production, and continued process verification (CPV)
  • Authors technical documentation, including technology transfer plans, facility fit and gap analysis reports, manufacturing study protocols and reports, and risk assessments
  • Supports equipment design to meet process needs and compliance/regulatory expectations
  • supports Engineering and Validation departments with subsequent procurement, qualification, and GMP readiness
  • Supports regulatory submissions, responses, on-site audits, and inspections
  • Represents MS&T in cross-functional teams related to mRNA/LNP programs and manufacturing operations
  • Provides person-in-plant (PIP) support in manufacturing at Beam Durham
  • Supports MS&T lab and non-GMP analytical testing of in-process intermediates, as needed
  • Fulltime
Read More
Arrow Right

Manufacturing Engineer

The successful candidate will play a crucial role in improving manufacturing pro...
Location
Location
United States , Riverside
Salary
Salary:
Not provided
https://www.roberthalf.com Logo
Robert Half
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of 3 years of experience as a Manufacturing Engineer or in a similar role
  • Proficiency in Mechanical Assembly, Mechanical Design, and Mechanical Components
  • Experience with Mechanical Drawings and Mechanical Engineering
  • Familiarity with Mechanical Equipment and Mechanical Systems
  • Skilled in Welding and Welding Inspection
  • Knowledge of Semiconductor Fabrication and Lean Manufacturing
  • Experience in Manufacturing, Manufacturing Assembly, and Manufacturing Engineering
  • Understanding of Manufacturing Equipment and Manufacturing Practices
  • Familiarity with ASME Y14.5 and ISO Standards
  • Proven experience in Quality Control, Equipment Calibration, and Equipment Maintenance
Job Responsibility
Job Responsibility
  • Develop, implement and manage a comprehensive facility weld program in line with company standards
  • Optimize welding operations and drive manufacturing improvements to enhance productivity and safety
  • Oversee the site weld program, including WPS/PQR, Welder Certifications, and equipment automation programs
  • Provide technical support and troubleshooting for various welding processes such as MIG, TIG, and others
  • Collaborate with Quality Control to ensure welding processes adhere to industry standards and customer specifications
  • Lead the design, implementation, and improvement of manufacturing projects related to welding and fabrication
  • Train production staff on proper welding techniques, equipment operation, and best practices
  • Work closely with Sales Administration to understand and meet customer welding requirements
  • Create and maintain technical documentation, including work instructions, process sheets, and project reports
  • Recommend, procure, and oversee the maintenance of welding equipment and tools
What we offer
What we offer
  • medical, vision, dental, and life and disability insurance
  • eligibility to enroll in company 401(k) plan
  • Fulltime
Read More
Arrow Right

Manufacturing Engineer

As a Manufacturing Engineer at 1X, you will be a hands‑on technical leader respo...
Location
Location
United States , Hayward
Salary
Salary:
90000.00 - 165000.00 USD / Year
1x.tech Logo
1X Technologies
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering, Mechatronics, Manufacturing Engineering, or related field
  • Minimum of 2 years of experience in manufacturing engineering, especially involving precision mechanical or electromechanical assemblies
  • Experience with CAM programming, fixture/tooling design, precision machining of metals or composites
  • Strong understanding of design for manufacturability (DFM) and experience integrating electromechanical systems
  • Familiarity with measurement techniques and standards such as GD&T, tolerance stack analysis, CMM or other high‑precision inspection methods
  • Solid collaboration skills across engineering disciplines, supply chain, QA, and production teams
  • Experience producing robotic actuators, joints, or other motion control systems
  • Exposure to high‑mix, low‑volume environments with frequent design iteration
  • Knowledge or experience with lean manufacturing, Six Sigma, continuous improvement strategies
  • Proficiency with CAD tools, PLM/ERP systems, and manufacturing documentation
Job Responsibility
Job Responsibility
  • Develop and refine manufacturing processes for robotic mobility and control components such as actuators, drive units, precision components, motor housings, and skeletal structures
  • Oversee full manufacturing workflows including fixture design, CAM programming, selection of cutting tools, and inspection/validation methods
  • Deploy automation and lights‑out machining strategies to enable continuous production with minimal human intervention
  • Drive process improvements to reduce cycle time, increase first‑pass yield, and improve reliability of robot hardware
  • Collaborate with design engineering on part geometry, materials, and design changes to ensure manufacturability at every stage
  • Manage change releases and product design revisions into production, focusing on scalability and consistency
  • Act as technical liaison between design, machining, assembly, and quality teams for owned components
  • Support build technicians and operators, maintain work instructions and operating procedures in up‑to‑date state
  • Implement statistical process control (SPC) and quality monitoring practices, take ownership of part or part family quality metrics
  • Troubleshoot production issues such as tolerance stack‑ups, tool wear, misalignment, and assembly variability
What we offer
What we offer
  • Health, dental, and vision insurance
  • 401(k) with company match
  • Paid time off and holidays
  • Fulltime
Read More
Arrow Right

Senior Engineer, Weld Manufacturing

Being an Engineer at Baxter means you play a critical role in helping us achieve...
Location
Location
United States , Batesville
Salary
Salary:
88000.00 - 121000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing disciplines
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Provide technical expertise or support related to manufacturing
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Work with Quality Control on reducing the NCMRs
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • medical and dental coverage
  • insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan (RSP)
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right

Senior Engineer, Weld Manufacturing

The Senior Engineer, Weld Manufacturing at Baxter plays a critical role in impro...
Location
Location
United States , Batesville, Indiana
Salary
Salary:
88000.00 - 121000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing disciplines
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Provide technical expertise or support related to manufacturing
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Work with Quality Control on reducing the NCMRs
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Medical and dental coverage that start on day one
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan with options for employee contributions and company matching
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right

Manufacturing Engineer

The Manufacturing Engineer will support the development, optimisation, and execu...
Location
Location
United Kingdom , Farnborough
Salary
Salary:
32.24 - 43.13 GBP / Hour
morson.com Logo
Morson Talent
Expiration Date
June 30, 2026
Flip Icon
Requirements
Requirements
  • Manufacturing or process engineering experience within assembly, automotive, or aerospace environments
  • Ability to read, interpret, and critique manufacturing processes and instructions
  • Strong attention to detail and structured approach to process review
  • Experience creating or editing Process Instructions, ERPs setups, and routings
  • Practical background in manufacturing assembly environments
  • Experience with ERP/PLM systems and data setup
  • Competent in identifying and implementing process improvements
  • Experience using RCCA methodology
  • Ability to work independently and collaboratively with cross-functional teams
Job Responsibility
Job Responsibility
  • Create, review, and update Process Instructions (PIs) and shop-floor documentation
  • Review end-to-end manufacturing processes and identify opportunities for improvement
  • Set up and manage ERP/PLM routings, BoMs, and system data
  • Provide hands-on support to assembly activities and ensure design intent is translated into efficient production processes
  • Identify and specify tooling to support process optimisation
  • Apply RCCA and problem-solving methodologies to production issues
  • Contribute to continuous improvement, right-first-time culture, and manufacturing efficiency targets
  • Support procurement, supply chain activities, and Make vs Buy assessments
  • Liaise with tooling, facilities, and production engineering teams to enable robust manufacturing capability
What we offer
What we offer
  • holiday pay
  • Fulltime
Read More
Arrow Right

Manufacturing Engineer

Sovereign Technologies, LLC has multiple openings in St. Louis, MO) Manufacturi...
Location
Location
United States , St. Louis
Salary
Salary:
Not provided
sovereigntec.com Logo
Sovereign Technologies
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelors in Mechanical Engineering, Industrial Engineering, or related
  • 1 year experience
  • Utilize Six Sigma methodology, MS Excel, CAPP+, and Teamcenter Vis mockup
Job Responsibility
Job Responsibility
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Create process flow map to understand assembly operations and components involved
  • Study the different possible failures for each operation to update PFMEA regularly
  • Work on CI cards and BIQ issues to resolve the issues without affecting the existing process line flow
  • Troubleshoot the critical defects using 2D drawings and cross functional meetings
  • Incorporate new manufacturing methods or processes to improve existing operations
  • Manage manufacturing related NPI tasks
  • Lead engineering change management team implement changes, approving the change notice, tool design and coordinated group of products to change and expertise in BOM management
  • Manage various assembly CapEx projects to acquire new assets required to build an NPI
  • Manage various Rapid Improvement Workshops (RIW) to improve the current assembly layout and material flow
  • Fulltime
Read More
Arrow Right