CrawlJobs Logo

Manufacturing Engineer, Senior

hyliion.com Logo

Hyliion

Location Icon

Location:
United States , Austin

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

The Senior Manufacturing Engineer collaborates with industrialization leadership and design engineering teams to develop prototype build processes and then adapt and scale these processes for full production. This position plays a critical part in defining and optimizing manufacturing processes, leading cross-functional teams, and contributing to the successful delivery of high-quality products.

Job Responsibility:

  • Collaborate with design engineering teams to develop prototype build processes and transition them to efficient, repeatable production-scale operations
  • Design, develop, and implement efficient manufacturing processes for engine and generator assembly operations
  • Identify and lead initiatives to improve productivity, reduce waste, and increase operational efficiency
  • Serve as the subject matter expert for assembly processes, providing technical guidance and support to production teams
  • Integrate additive manufacturing (3D printing) technologies into production processes, where applicable, to enhance design flexibility and reduce costs
  • Manage cross-functional projects, ensuring timelines, budgets, and objectives are met
  • Support root cause analysis and corrective action initiatives to address production issues and improve product quality
  • Design and specify tooling, jigs, and fixtures to support production activities

Requirements:

  • Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering (or related field) required
  • 7+ years of experience in a manufacturing engineering role, with significant exposure to engine, genset and/or electric motor assembly operations
  • Expertise in manufacturing process design and improvement (lean, Kaizen, error-proofing, fixture design)
  • Experience with DOE, gage R&R, and process qualifications
  • Ability to design tooling for mid/high-volume manufacturing
  • Demonstrated experience implementing automation into production processes
  • Experience with prototype development and transitioning processes to production-scale operations
  • Experience with custom fabrication, engine and generator assembly, electric motor assembly processes
  • Proficiency in design software (e.g NX, CAD, stackup and GD&T) and manufacturing execution systems (MES)
  • Knowledge of Lean, Six Sigma, and other continuous improvement methodologies
  • Familiarity with automotive or aerospace industry standards and regulatory requirements (e.g., QS9000, ISO9001, AS9100, NADCAP)

Nice to have:

  • Advanced Technical or Business degree beneficial
  • Aerospace or other precision manufacturing industry experience is highly preferred
  • Experience with additive manufacturing (3D printing) beneficial
What we offer:
  • Medical Plans, with PPO or HDHP options
  • Dental Plans, with buy-up option
  • Vision Plan
  • Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options
  • Short Term Disability, paid for by the company
  • Long Term Disability, paid for by the company
  • Flexible Spending Accounts (FSA)
  • Health Savings Account (HSA)
  • 401k/Roth 401k
  • Voluntary Accident Plans
  • Voluntary Critical Illness Plans
  • Hospital Indemnity Plan

Additional Information:

Job Posted:
January 03, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Hyliion - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Manufacturing Engineer, Senior

Senior Manufacturing Engineer I

You will be part of a critical team that ensures life-saving technology can be m...
Location
Location
United States , Phoenix
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent experience)
  • 5+ years of experience in manufacturing engineering for high-volume or high-reliability products
  • Strong foundation in mechanical design and CAD modeling (SolidWorks preferred)
  • Practical, hands-on prototyping skills—familiarity with machining, 3D printing, assembly, and basic electronics integration
  • Deep understanding of materials and processes, especially polymers, metals, and joining methods
  • Applied knowledge of manufacturing principles (DFM, DFA, PFMEA, SPC, lean, six sigma)
  • Experience implementing or integrating MES, traceability, or digital manufacturing systems
  • Analytical mindset with experience using statistical tools or AI-assisted data analysis for problem-solving
  • Excellent communication skills with the ability to collaborate & influence across cross functional teams
  • Self-starter who thrives in a fast-paced, hands-on engineering environment
Job Responsibility
Job Responsibility
  • Develop and sustain manufacturing processes that meet cost, ergonomic, quality, and cycle time requirements for high-volume production
  • Collaborate closely with Product Design/R&D teams to influence manufacturability early in the product lifecycle
  • provide feedback on design-for-manufacturing (DFM), materials selection, and assembly tolerances
  • Design and implement production tooling, fixtures, and assembly methods using SolidWorks
  • Lead process characterization and optimization using DOE, SPC, and other data-driven methodologies
  • Evaluate and integrate manufacturing technologies including machining, molding, additive manufacturing, and joining methods (e.g., soldering, ultrasonic welding, mechanical fastening)
  • Drive implementation of traceability systems and MES integration to enhance process visibility and compliance
  • Partner cross-functionally with Quality, Product, and Automation Engineering to ensure robust and repeatable manufacturing outcomes
  • Identify and implement opportunities for cost reduction, quality improvement, and process efficiency, leveraging AI/data tools where appropriate
  • Provide hands-on technical support on the manufacturing floor, troubleshooting issues with equipment, materials, and processes
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • snacks in our offices
Read More
Arrow Right

Senior Manufacturing Process Engineer

Ready to join a team of visionaries who is dedicated to solving one of humankind...
Location
Location
Germany , Munich
Salary
Salary:
Not provided
climeworks.com Logo
Climeworks
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in process engineering, manufacturing engineering, mechanical engineering, materials science, or similar
  • 5-10 years of experience in a manufacturing environment including significant experience with start-up phases and successful delivery of commercial products
  • Experience with continuous manufacturing lines including powder handling processes (HSE regulations and ATEX requirements)
  • Logic-driven, experienced with both process modeling approaches (heat and mass transfer, etc.) as well as structured risk-identification and problem-solving tools (e.g., process FMEA, 5 Whys, Fishbone)
  • Take initiative, are results-driven without missing important details, and are hands-on throughout the full development cycle—from lab to high-level evaluations
  • Collaborate easily across teams, communicate clearly, and enjoy leading both in-house and external projects
  • Fluent in English
  • At least B1-level proficiency in German
  • Knowledge of French is an advantage
  • Open to frequent travel (up to 60%, primarily between the Munich and Zurich areas)
Job Responsibility
Job Responsibility
  • Manufacturing process expert: Climeworks’ core expert in the process operation of novel manufacturing lines for sorbent filter production, during development, startup, and operation
  • Own all aspects of manufacturing process engineering to produce new sorbent filter material (working with manufacturing engineers and product owners): Understand process parameters & product impact
  • Evaluate and tune parameter ranges used in equipment purchases and in startup
  • Lead manufacturing process ramp-up, troubleshooting, and root cause analysis
  • Lead and own process FMEAs before, during, and after the startup phase
  • Ensure good documentation, training, and knowledge transfer
  • Cross-Functional Collaboration: Collaborate closely with internal experts in R&D, characterization/quality, product design, and sorbent/process development to ensure manufacturing process parameters lead to a guaranteed high-quality sorbent module product, and support the development of new testing methods
  • External partnerships & technical leadership: Act as a key technical expert in collaborations with external partners, ensuring DAC-specific requirements for sorbent filters manufacturing are met, including by being on-site to monitor operations when needed
  • Team player: Where needed, support lab-scale manufacturing in R&D, and new concept evaluation, for future-oriented DAC solutions
Read More
Arrow Right

Senior Manufacturing Engineer, Wing

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
122880.00 - 153600.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s or advanced degree in Aerospace, Mechanical, or Manufacturing Engineering (or equivalent experience)
  • 8+ years in aerospace manufacturing, with a focus on airframe assembly and composite structures
  • prototype or experimental aircraft experience strongly preferred
  • Proven track record of driving DFM principles for complex composite parts (layup, bonding, cure)
  • Expertise in advanced manufacturing tools (CAD, PLM, MES)
  • Strong leadership, communication, and cross-functional coordination skills to set direction and mentor a diverse engineering team
  • Ability to thrive in a dynamic, high-iteration environment, balancing big-picture program goals with hands-on, real-time build solutions
Job Responsibility
Job Responsibility
  • Provide overarching leadership and technical direction for airframe manufacturing processes, including composite layup, bonding, trimming, metallic integration, and assembly sequencing
  • Own the end-to-end lifecycle of airframe builds, collaborating with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation from concept to flight test readiness
  • Drive tooling strategies and fixture development for prototype builds, balancing the need for high precision with practical solutions suited to low-volume, rapidly evolving programs
  • Serve as the primary subject matter expert on the shop floor, leading root-cause analysis and implementing timely corrective actions to maintain schedule, quality, and structural integrity
  • Act as a key liaison with supply chain and regulatory bodies (FAA), ensuring materials, documentation, and processes align with certification objectives
  • Mentor and guide manufacturing engineers and technicians at all levels, setting best practices, championing innovative problem-solving, and fostering a hands-on culture of ownership and accountability
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Engineer, Harnessing & Wiring

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , Santa Clara
Salary
Salary:
122880.00 - 166800.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering (or equivalent experience)
  • Minimum of 6+ years of experience in Harnessing & Wiring design, installation, and manufacturing within the aerospace industry
  • Experience in an environment tied to FAA-certified aircraft
  • Experience with production systems design and optimization, particularly in relation to wire harness installation in aircraft
  • Experience with thermoset carbon fiber prepreg materials and the integration of electrical components into composite structures
  • Proven experience working with external suppliers and contract manufacturers to support low-rate initial production and high-rate scaling
  • Excellent problem-solving skills with a strong ability to anticipate potential issues and develop effective solutions
  • Strong communication skills to collaborate with internal teams, external suppliers, and regulatory bodies
  • Detail-oriented with a focus on process documentation and compliance
Job Responsibility
Job Responsibility
  • Design Production Systems: Develop a comprehensive production system concept for the installation of wire harnesses in our aircraft assembly line, considering the use of supplier-fabricated structural assemblies
  • Collaborate with Suppliers: Coordinate with external suppliers to identify opportunities for pre-installing harness standoffs and supports and determine which harnesses, if any, should be pre-installed during the fabrication of structural assemblies
  • Process Optimization: Establish and document processes, guidelines, and standards to streamline the installation of wire harnesses, making the process faster, easier, and safer. Identify preferred installation components and methods
  • Damage Mitigation and Repair: Anticipate potential types of damage to wiring harnesses during production and develop mitigation strategies and repair procedures to ensure the integrity and safety of the installation
  • Adapt to High-Rate Production: Plan for production rate increases, analyzing how the production system will need to change to accommodate higher volumes over time
  • Support Certification Efforts: Create process documents, guidelines, and standards required to support the FAA certification efforts and maintain compliance with all regulatory requirements
  • Continuous Improvement: Identify and implement opportunities for continuous improvement within the EWIS production process to enhance quality, reduce costs, and increase efficiency
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Engineer

The NPI PCBA Manufacturing Engineer will perform DFM reviews and related NPI man...
Location
Location
United States , San Jose
Salary
Salary:
78700.00 - 181200.00 USD / Year
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BSEE/BSME or higher degree with at least 6-10 years of electronics manufacturing experience
  • Track record in supporting new product development teams as an NPI mfg. engineer with responsibility for complex PCBA and/or PCB manufacturability
  • Knowledge of interconnect and electronic assembly applications and technologies including soldering, press fit, and rework with knowledge of IPC-A-610
  • Demonstrated ability to work independently in a dynamic growth environment
  • Excellent English communications skills, both verbal and written
  • Excellent problem-solving/analytical skills with strong aptitude for teamwork
  • Practical skills including experience improving business processes
Job Responsibility
Job Responsibility
  • Supports NPI products as key DFM engineer responsible for PCBA manufacturability including meeting DFM guidelines in areas including SMT, BGA repair processes, wave solder, press fit, component package and new part qualification
  • Works with signal integrity teams and PCB suppliers to develop PC board stack-ups
  • Performs DFM reviews of new designs with responsibility for resolving PCBA and PCB manufacturability issues
  • Attends program teams, factory partner reviews, or other meetings related to PCBA/PCB DFM issues
  • Improve yields and cycle times to reduce cost and short leadtimes
  • In coordination with factory teams, monitors or develops DOE’s to identify and confirm process parameters related to PCBA
  • Provide guidance/support to quality and sustaining mfg. engineering teams for critical quality or manufacturing problems
What we offer
What we offer
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
  • Fulltime
Read More
Arrow Right

Senior Engineer, Weld Manufacturing

The Senior Engineer, Weld Manufacturing at Baxter plays a critical role in impro...
Location
Location
United States , Batesville, Indiana
Salary
Salary:
88000.00 - 121000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing disciplines
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Provide technical expertise or support related to manufacturing
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Work with Quality Control on reducing the NCMRs
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Medical and dental coverage that start on day one
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan with options for employee contributions and company matching
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right

Senior Engineer, Weld Manufacturing

Being an Engineer at Baxter means you play a critical role in helping us achieve...
Location
Location
United States , Batesville
Salary
Salary:
88000.00 - 121000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing disciplines
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Provide technical expertise or support related to manufacturing
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Work with Quality Control on reducing the NCMRs
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • medical and dental coverage
  • insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan (RSP)
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right

Senior Mechanical Manufacturing Engineer

We are seeking a Mechanical Manufacturing Engineer to join our team in Mountain ...
Location
Location
United States , Mountain View
Salary
Salary:
150000.00 - 190000.00 USD / Year
kodiak.ai Logo
Kodiak Robotics
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS or equivalent experience in Mechanical Engineering
  • 5+ years of experience developing assemblies for production and facilitating their construction at scale with contract manufacturers
  • Relevant processes include: mechanical assembly, CNC milling, sheet metal bending, welding, and wire harnesses fabrication
  • Experience with 3D mechanical CAD (SolidWorks preferred, CATIA, NX, etc)
  • Experience with PDM and PLM (Arena and ePDM preferred, Teamcenter, etc)
  • Strong problem-solving skills and comfort being hands-on at the manufacturing line
Job Responsibility
Job Responsibility
  • Advise team on design-for-assembly (DFA) and design-for-manufacturing (DFM) considerations
  • Assist in development of manufacturing bill of materials (MBOM)
  • Release design documents to manufacturing through PLM software (Arena)
  • Design mechanical systems in CAD software (SolidWorks)
  • Create content for work instructions, such as CAD graphics
  • Participate in first article inspections (FAI) and new product introduction builds (NPI) on assembly lines
  • Collect and document feedback from contract manufacturers and facilitate cross functional design improvements accordingly
  • Troubleshoot production and field quality issues, driving root cause and corrective actions
  • Collaborate with supply chain and manufacturing teams to revise designs with a focus on cost optimization
What we offer
What we offer
  • Competitive compensation package including equity and biannual bonuses
  • Excellent Medical, Dental, and Vision plans through Kaiser Permanente, Anthem, and Guardian (including a medical plan with infertility benefits)
  • Flexible PTO and generous parental leave policies
  • Office perks: dog-friendly, free catered lunch, a fully stocked kitchen, and free EV charging
  • Long Term Disability, Short Term Disability, Life Insurance
  • Wellbeing Benefits - Headspace, One Medical, Gympass, Spring Health
  • Fidelity 401(k)
  • Commuter, FSA, Dependent Care FSA, HSA
  • Various incentive programs (referral bonuses, patent bonuses, etc.)
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy