CrawlJobs Logo

Manufacturing Engineer II

commscope.com Logo

CommScope

Location Icon

Location:
Mexico , Juárez, Bermúdez

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

CommScope is looking to add an Engineer II, Manufacturing to join our Manufacturing Operations Team in Cd. Juarez, Chihuahua. Under indirect supervision, it develops and maintains processes passionate about optimizing the use of manufacturing resources. Analyzes the conditions and capabilities of their areas and the equipment used in the manufacturing areas. Performs studies of times and movements. Participates in the introduction of new products and transfers from one location to another, as well as in the accurate implementation of engineering changes.

Job Responsibility:

  • Documentation management and analysis
  • Verifies the machinability of products
  • Proposes design changes for manufacturability
  • Analyze capabilities based on volumes
  • Identifies needs and provides area, supplies, facilities, equipment and machinery
  • Design the flow and assembly method
  • Lay Out Design and Maintenance
  • Production Line Balancing
  • Implement Engineering Changes
  • Establish manufacturing processes that impact Quality, Cost and Production Volumes
  • Continuously Works on Productivity Projects to reduce costs
  • Ensure that facilities, equipment and tools are optimal
  • Provide the assembly method
  • Staff Training
  • Timely implementation of engineering changes
  • Continuous improvement
  • Ongoing support in SAP (Engineering Functions)
  • SAP System (Manufacturing)
  • Manufacturing Process System
  • Information and Documentation System
  • Manufacturing Methods
  • Continuous Improvement System
  • Create routes in the SAP system
  • Develops and maintains assembly processes and visual aids
  • Proposes and or validates material deviations (TDA)
  • Proposes, validates, and approves process changes
  • Proposes, validates and approves design changes (CMR & CMO)
  • Transfer of products
  • Productivity Projects for Cost Reduction

Requirements:

  • Bachelor's degree in Industrial Engineering preferably or similar Engineering (Mechatronics, Mechanics, Electronics, Electromechanics, Systems)
  • English 80% (written and spoken)
  • 3-5 years of experience in similar position within a manufacturing environment
  • Process and resource management
  • ISO 9000 Procedures
  • Strategic planning
  • Study of Tempos and Movements, Line Swinging
  • Technical drawing
  • Assembly processes
  • Microsoft Office Packages
  • SAP
  • Communication
  • Teamwork
  • Just in time
  • Poka Yoke
  • Continuous Improvement Techniques
  • 8 G-d, 5 Whys
  • Proactive, Paradigm Breaker, Communicative, Creative, Team Player, Tenacious, Responsible, Analytical

Additional Information:

Job Posted:
January 01, 2026

Icon
CommScope - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Manufacturing Engineer II

Manufacturing Process Engineer II

At Batesville, you will be a part of a dynamic team committed to excellence and ...
Location
Location
United States , Vicksburg
Salary
Salary:
Not provided
batesville.com Logo
Batesville Canada ULC
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree (B.S./B.A.) or equivalent from a college or university in Engineering or related field
  • Minimum of 2 years related engineering experience and/or training
  • with an emphasis on manufacturing environment
  • Experience in AutoCAD and Info View
  • Business acumen with experience relating projects to growth and profitability
  • Ability to compile, display and analyze data in a logical format and to use the data to develop solutions
  • Solid organizational skills and ability to operate in a fast-paced environment with multiple priorities
Job Responsibility
Job Responsibility
  • Build relationships across all levels to understand ongoing operational issues and lead improvement and sustainability efforts
  • Design, develop, and implement process improvements and to control usage and reduce scrap
  • Ensure product flow is optimized by reducing WIP and improving productivity
  • Applies statistical process control (SPC) methods and quality design and control tools (PFMEA, Control Plan, DOE, etc.) for analyzing data to evaluate the current process and process changes
  • Support implementation of corrective actions to solve production/quality issues
  • Cash Forecasting and Analysis: Prepare accurate and reliable cash flow forecasts, analyze variances, and provide insights to support strategic decision-making
  • Other duties may be assigned
What we offer
What we offer
  • Comprehensive medical, dental and vision insurance, as well as prescription coverage, short-term disability, Employee Assistance Program (EAP), and more offered after 90 calendar days
  • Generous 401K Matching Program
  • Opportunities for development and advancement
  • Fulltime
Read More
Arrow Right

Manufacturing Engineer II, Extrusion

The Manufacturing Engineer II will be responsible for the manufacture, developme...
Location
Location
United States , Valley View, OH
Salary
Salary:
Not provided
peaknano.com Logo
Peak Nano
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in mechanical, industrial, or chemical engineering, or a related field
  • 2+ years of hands-on experience, preferably in the plastics industry or academia, with extrusion of thermoplastic polymer films or compounds
  • Knowledge of polymer materials and their properties
  • Familiarity with extrusion equipment and tooling
  • Strong problem-solving and analytical skills
  • US Citizenship
Job Responsibility
Job Responsibility
  • Optimize process parameters to achieve desired product quality and production rates
  • Troubleshoot existing process and equipment to identify and resolve issues
  • Conduct experiments and trials to evaluate new materials and processes
  • Selecting and specifying extrusion equipment and tooling
  • Overseeing the installation and maintenance of extrusion equipment
  • Designing and modifying extrusion dies and tooling
  • Collaborating with vendors to source and procure equipment and tooling
  • Develop and implement quality control procedures
  • Monitor product quality and identify areas for improvement
  • Analyze data to identify trends and implement corrective actions
  • Fulltime
Read More
Arrow Right
New

Mechanical Engineer II

Mechanical Design Engineers at Axon have design ownership over next generation l...
Location
Location
United States , San Francisco
Salary
Salary:
120000.00 - 138000.00 USD / Year
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or equivalent experience
  • Minimum 2+ years of product design experience in high-end consumer electronic products
  • Proficiency with Creo or similar 3D CAD software
  • Knowledge and experience designing for typical production processes, including plastic injection molding, stamped sheetmetal, die-casting, and CNC machining
  • Familiarity with adhesives and bonded joint design
  • Experience designing for a high level of dust/water ingress protection
  • Experience with PCB/PCBA flex circuit and other electro-mechanical integration
  • Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
  • Ability to interpret product requirements and translate into quantifiable engineering deliverables
  • Experience preserving Industrial Design intent
Job Responsibility
Job Responsibility
  • Drive innovative product development from conceptualization through manufacturing
  • Utilize creative problem solving skills to develop, prototype and prove concepts for subsystem and system level designs
  • Build and test high-fidelity subsystem and full system prototypes
  • Perform detailed mechanical analysis to ensure proper function through FEA, tolerance analysis, testing, and other exploratory means
  • Collaborate regularly with both domestic and international stakeholders
  • Work autonomously and collaboratively in an empowering and fast-paced environment
  • Hone your engineering expertise in a dynamic learning environment focused on personal and professional development
What we offer
What we offer
  • Competitive salary, bonus, RSUs, and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Snacks in our offices
  • Fulltime
Read More
Arrow Right

Mechanical Engineer II

Mechanical Design Engineers at Axon have design ownership over next generation l...
Location
Location
United States , San Francisco
Salary
Salary:
120000.00 - 138000.00 USD / Year
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or equivalent experience
  • Minimum 2+ years of product design experience in high-end consumer electronic products
  • Proficiency with Creo or similar 3D CAD software
  • Knowledge and experience designing for typical production processes, including plastic injection molding, stamped sheetmetal, die-casting, and CNC machining
  • Familiarity with adhesives and bonded joint design
  • Experience designing for a high level of dust/water ingress protection
  • Experience with PCB/PCBA flex circuit and other electro-mechanical integration
  • Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
  • Ability to interpret product requirements and translate into quantifiable engineering deliverables
  • Experience preserving Industrial Design intent
Job Responsibility
Job Responsibility
  • Drive innovative product development from conceptualization through manufacturing
  • Utilize creative problem solving skills to develop, prototype and prove concepts for subsystem and system level designs
  • Build and test high-fidelity subsystem and full system prototypes
  • Perform detailed mechanical analysis to ensure proper function through FEA, tolerance analysis, testing, and other exploratory means
  • Collaborate regularly with both domestic and international stakeholders
  • Work autonomously and collaboratively in an empowering and fast-paced environment
  • Hone your engineering expertise in a dynamic learning environment focused on personal and professional development
What we offer
What we offer
  • Competitive salary, bonus, RSUs, and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Snacks in our offices
  • Fulltime
Read More
Arrow Right

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
  • Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
  • Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
  • Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
  • Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
  • Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
  • Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
  • Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
  • Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired
Job Responsibility
Job Responsibility
  • Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
  • Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
  • Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
  • Perform debug, failure analysis, and rework of electronics systems, circuits, and components
  • Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
  • Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
  • Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
  • Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
  • Assess and document design change outcomes, test results, and related information and present information to design teams and management
  • Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Fulltime
Read More
Arrow Right

Hardware Test Engineer II

The Test Engineer II is responsible for creating test specifications, implementi...
Location
Location
United States , Redmond
Salary
Salary:
90000.00 - 120000.00 USD / Year
sigmadzn.com Logo
Sigma Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's Degree in Mechanical Engineering, Electrical Engineering or related field
  • 2-4 years of relevant test engineering experience
  • 1+ years providing test support for opto, mechanical, and electrical consumer devices
  • Working knowledge of soldering techniques and electrical test equipment
  • Proficiency in Python programming
  • Ability to read and interpret wire diagrams and PCB schematics
  • Strong technical communication and documentation skills
Job Responsibility
Job Responsibility
  • Use product specifications to create basic test plans and document test results independently
  • Create and execute automated test plans to verify products meet requirements
  • Physical setup and deployment of test systems and equipment with minimal guidance
  • Work proficiently in both Windows and Linux systems
  • Develop basic script packages for test and data collection
  • Use and configure JTAG and similar test devices
  • Create and maintain test work instructions and flow diagrams
  • Actively participate in failure review processes including basic root cause analysis
  • Maintain and deploy software configurations in test environment
  • Communicate test requirements and results to teammates and stakeholders
What we offer
What we offer
  • 401(k) with up to 4% company match
  • quarterly bonus program
  • 15-days of accrued PTO
  • 9 company paid holidays
  • multiple options for medical insurance
  • dental insurance
  • voluntary benefits: vision, long-term disability, and life insurance
  • Fulltime
Read More
Arrow Right
New

Senior Security Operations Engineer II

As a Senior Security Operations Engineer, you’ll play a key role in ensuring the...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 7+ years of experience in operations, site reliability, or infrastructure engineering roles
  • Strong experience securing and managing cloud environments (e.g., AWS, Azure) and containerized workloads
  • Deep understanding of Linux systems, networking, distributed systems, and their associated security controls
  • Proficiency in automation, scripting, and security tooling integration to streamline operations and enforcement
  • Experience with security monitoring, alerting, SIEM platforms, and observability tools
  • Solid grasp of CI/CD practices with integrated security testing and compliance checks
  • Experience managing Kubernetes clusters and running containerized workloads in production
  • Experience with deploying and administrating any of the following: scalable cloud native secrets solutions such as AWS KMS, Azure KeyVault
  • PKI solutions such as EJBCA, Smallstep, Venafi
  • or vaulting solutions such as Hashicorp Vault
Job Responsibility
Job Responsibility
  • Implementing and improving automated security checks in CI/CD pipelines to prevent vulnerabilities from reaching production
  • Writing, reviewing, and maintaining security-focused infrastructure-as-code for scalable and compliant deployments
  • Investigating security incidents, performing root cause analysis, and implementing long-term mitigation strategies
  • Collaborating with developers to develop new features, services, and infrastructure requirements
  • Enhancing security observability through improved log collection, metrics, and alerting configurations
  • Maintaining and improving security runbooks, incident response playbooks, and internal security tooling for operational efficiency
  • Resolve security/infrastructure incidents by participating in high impact/high visibility incidents as a participant and ideally as an incident commander
  • Maintain and secure critical infrastructure components such as PKI (Public Key Infrastructure) and IAM ( Identity & Access Management) systems, ensuring reliability, scalability, and compliance with organizational and industry security standards
  • Build and maintain secure, reliable, and scalable infrastructure that protects core services and sensitive data
  • Troubleshoot and resolve complex operational and system-level issues across environments
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Snacks in our offices
  • Fulltime
Read More
Arrow Right

Senior Security Operations Engineer II

As a Senior Security Operations Engineer, you’ll play a key role in ensuring the...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 7+ years of experience in operations, site reliability, or infrastructure engineering roles
  • Strong experience securing and managing cloud environments (e.g., AWS, Azure) and containerized workloads
  • Deep understanding of Linux systems, networking, distributed systems, and their associated security controls
  • Proficiency in automation, scripting, and security tooling integration to streamline operations and enforcement
  • Experience with security monitoring, alerting, SIEM platforms, and observability tools
  • Solid grasp of CI/CD practices with integrated security testing and compliance checks
  • Experience managing Kubernetes clusters and running containerized workloads in production
  • Experience with deploying and administrating any of the following: scalable cloud native secrets solutions such as AWS KMS, Azure KeyVault
  • PKI solutions such as EJBCA, Smallstep, Venafi
  • or vaulting solutions such as Hashicorp Vault
Job Responsibility
Job Responsibility
  • Implementing and improving automated security checks in CI/CD pipelines to prevent vulnerabilities from reaching production
  • Writing, reviewing, and maintaining security-focused infrastructure-as-code for scalable and compliant deployments
  • Investigating security incidents, performing root cause analysis, and implementing long-term mitigation strategies
  • Collaborating with developers to develop new features, services, and infrastructure requirements
  • Enhancing security observability through improved log collection, metrics, and alerting configurations
  • Maintaining and improving security runbooks, incident response playbooks, and internal security tooling for operational efficiency
  • Resolve security/infrastructure incidents by participating in high impact/high visibility incidents as a participant and ideally as an incident commander
  • Maintain and secure critical infrastructure components such as PKI (Public Key Infrastructure) and IAM ( Identity & Access Management) systems, ensuring reliability, scalability, and compliance with organizational and industry security standards
  • Build and maintain secure, reliable, and scalable infrastructure that protects core services and sensitive data
  • Troubleshoot and resolve complex operational and system-level issues across environments
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Snacks in our offices
  • Fulltime
Read More
Arrow Right
Welcome to CrawlJobs.com –
Your Global Job Discovery Platform
At CrawlJobs.com, we simplify finding your next career opportunity by bringing job listings directly to you from all corners of the web. Using cutting-edge AI and web-crawling technologies, we gather and curate job offers from various sources across the globe, ensuring you have access to the most up-to-date job listings in one place.
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Poland Jobs Ireland Jobs Germany Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy