CrawlJobs Logo
Etched Logo Etched · Manufacturing

Manufacturing Engineer - Electrical Engineering

United States, San Jose 150000.00 - 210000.00 USD / Year · Job Posted February 18, 2026
Apply Position
Job Link Share

Job Description

As a NPI Electrical Engineer at Etched, you will own the electrical manufacturing side of our AI systems, ensuring seamless product introduction from NPI through high-volume ramp. You will collaborate with hardware, ASIC, mechanical, and reliability engineering to drive manufacturability, yield, and cost efficiency at scale. This role focuses on board-level bring-up, design-for-manufacturing (DFM), BOM risk management, and sustaining improvements to ensure our AI hardware meets the highest standards of quality and reliability.

Job Responsibility

  • Lead new product introduction (NPI) and sustaining engineering activities at board and system level
  • Drive Design for Manufacturing (DFM) reviews to ensure robust, scalable, and cost-effective production
  • Partner with Component Engineering, Supply Chain, and Hardware teams to influence component selection and mitigate manufacturing risk early in the design cycle
  • Own BOM structuring and risk management, ensuring supply resilience and cost control
  • Perform board bring-up and debug, applying DOE/EFA and hands-on lab work
  • Review and influence Process FMEA and Design FMEA, providing diagnostics input
  • Work directly with Contract Manufacturers (CMs) and ODMs to close capability gaps, improve yield, and qualify new components
  • Develop, release, and maintain product documentation across the lifecycle
  • Provide leadership in complex issue resolution and drive defect/yield improvement initiatives
  • Use industry-standard debug tools (oscilloscopes, logic analyzers, TDR, etc.) to troubleshoot issues down to board and component level

Requirements

  • Bachelor’s or Master’s degree in Electrical Engineering or a related field
  • 8+ years of experience in manufacturing, product, or electrical engineering
  • Strong knowledge of system hardware architectures and PCB fabrication/assembly processes
  • Experience with DFX/DFM, yield assessment, and board-level debug
  • Hands-on experience with PCB CAD/CAE tools (e.g., Allegro, Valor) and understanding of design-to-build flows
  • Proven ability to work across NPI and sustaining environments, from proto bring-up to ramp
  • Strong problem-solving skills with focus on yield, manufacturability, and cost optimization
  • Collaborative mindset to work effectively with cross-functional teams and suppliers

What we offer

  • Medical, dental, and vision packages with generous premium coverage
  • $500 per month credit for waiving medical benefits
  • Housing subsidy of $2k per month for those living within walking distance of the office
  • Relocation support for those moving to San Jose (Santana Row)
  • Various wellness benefits covering fitness, mental health, and more
  • Daily lunch + dinner in our office
Etched - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Manufacturing Engineer - Electrical Engineering

8 matching positions

Sr. Engineer, Manufacturing Engineering

At Baxter, we believe every person—regardless of who they are or where they are ...
Location
Location
Malta , Marsa
Salary
Salary:
32000.00 EUR / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering (Mechanical, Electrical, Manufacturing, or related field)
  • Minimum 3+ years of experience in a manufacturing environment
  • Strong ability to analyze statistical and process data and translate insights into actionable improvements
  • Experience with process improvement methodologies and tools (e.g., FMEA, SPC, Lean principles)
  • Ability to manage multiple priorities in a fast-paced manufacturing environment
  • Ability to work in a regulated environment and ensure compliance with quality and safety standards
  • Strong problem-solving skills with a proactive and resourceful mindset
  • Effective communication and collaboration skills to work with cross-functional teams and external partners
Job Responsibility
Job Responsibility
  • Perform routine and non-routine calibration and maintenance activities for analytical laboratory instruments in accordance with approved procedures and schedules
  • Plan, schedule, and manage calibration and maintenance activities performed by external service providers or equipment manufacturers, including supplier-calibrated instruments
  • Review service reports and calibration certificates to ensure completeness, accuracy, and compliance with internal procedures and regulatory expectations
  • Provide technical support in the event of instrument malfunctions or failures, including troubleshooting, root cause identification, and coordination with equipment manufacturers or service providers to resolve issues
  • Collaborate closely with Quality team members to ensure calibration and maintenance activities are aligned with quality system requirements, including data integrity, documentation standards, and change management processes
  • Ensure adherence to applicable Quality Systems, GLP principles, and regulatory requirements
  • actively participate in audit preparation, inspections, and responses to audit findings related to calibration and maintenance activities
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Fulltime
Read More
Arrow Right

Sr. Engineer, Manufacturing Engineering

Being an Engineer at Baxter means you play a critical role in helping us achieve...
Location
Location
Malta , Marsa
Salary
Salary:
32000.00 EUR / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in Manufacturing industry 3+ years is required for Senior Bachelors Degree in Engineering field (Mechanical, Electrical or Manufacturing)
  • Ability to interpret and analyze statistical data and information and financial reports, understand, and resolve technical difficulties, interface with internal engineering/technical experts and external technical representatives, manage multiple priorities in a manufacturing plant setting, and be resourceful to a large manufacturing department.
Job Responsibility
Job Responsibility
  • Ensure products are provided to customers on time so that product quality, yield, operating costs and process efficiencies are met
  • Responsible for assuring compliances to all regulatory requirements – FDA, OSHA, OFCCP, EPA, etc
  • Adheres to all environmental, health and safety SOPs, equipment, policies and procedures, including any process specific requirements
  • Perform analytical review, recommend, and implement corrective action for any exception condition
  • Identify/Execute/Implement process specific improvements within all production areas arising from both quality and performance issues
  • Areas of focus include: DPM, Conversion loss, SPC, CIPM, FMEA, EPC, Digitization and iCare
  • Support Maintenance Activities and upkeep of respective documentation
  • Maintain and update departmental Standard Local Operating Procedures
  • Support plant-wide strategic plan programs and activities
  • Reporting directly to the Maintenance Area Principal Engineer
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Fulltime
Read More
Arrow Right

Engine Dynamometer & Test Engineer – Manufacturing Engineering

This is a dual-focus role combining manufacturing engineering ownership of engin...
Location
Location
India , Chennai
Salary
Salary:
Not provided
ford.com Logo
Ford Motor Company
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3–15 years of hands-on experience in engine dynamometer testing and test cell operations
  • Bachelor’s degree in Mechanical, Electrical, or Automotive Engineering
  • Strong understanding of ICE systems including air path, fuel, combustion, cooling, lubrication, and exhaust
  • Proven ability to independently troubleshoot test hardware, instrumentation, and automation software
  • Strong English communication skills (written and verbal) for cross‑functional collaboration
  • Ability to manage multiple priorities in a high‑pressure test environment
Job Responsibility
Job Responsibility
  • Manage engine dynamometers, instrumentation, and Data Acquisition (DAQ) systems
  • Troubleshoot and resolve Dyno hardware, instrumentation, and automation software issues
  • Ensure test cells are correctly configured for performance, emissions, durability, or calibration testing
  • Define material handling requirements for test facilities (rail systems, lift assists, fixtures)
  • Develop and maintain Bill of Process (BOP) standards for test methods and equipment specifications
  • Create and maintain Bill of Material (BOM) for test systems and standardise components globally
  • Use virtual manufacturing and virtual commissioning to simulate and validate test systems
  • Develop test process sequences and provide inputs to the Global Study Process Allocation System (GSPAS)
  • Define Scope of Work (SOW) and support procurement of engine test systems aligned with Powertrain strategy
  • Provide manufacturing feasibility assessments and cost estimates to programme management
  • Fulltime
Read More
Arrow Right

Sr. Engineer, Manufacturing Engineering

Being an Engineer at Baxter means you play a critical role in helping us achieve...
Location
Location
Malta , Marsa
Salary
Salary:
32000.00 EUR / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering (Mechanical, Electrical, Manufacturing, or related field)
  • Minimum 3+ years of experience in a manufacturing environment
  • Strong ability to analyze statistical and process data and translate insights into actionable improvements
  • Experience with process improvement methodologies and tools (e.g., FMEA, SPC, Lean principles)
  • Ability to manage multiple priorities in a fast-paced manufacturing environment
  • Ability to work in a regulated environment and ensure compliance with quality and safety standards
  • Strong problem-solving skills with a proactive and resourceful mindset
  • Effective communication and collaboration skills to work with cross-functional teams and external partners.
Job Responsibility
Job Responsibility
  • Perform routine and non-routine calibration and maintenance activities for analytical laboratory instruments in accordance with approved procedures and schedules
  • Plan, schedule, and manage calibration and maintenance activities performed by external service providers or equipment manufacturers, including supplier-calibrated instruments
  • Review service reports and calibration certificates to ensure completeness, accuracy, and compliance with internal procedures and regulatory expectations
  • Provide technical support in the event of instrument malfunctions or failures, including troubleshooting, root cause identification, and coordination with equipment manufacturers or service providers to resolve issues
  • Collaborate closely with Quality team members to ensure calibration and maintenance activities are aligned with quality system requirements, including data integrity, documentation standards, and change management processes
  • Ensure adherence to applicable Quality Systems, GLP principles, and regulatory requirements
  • actively participate in audit preparation, inspections, and responses to audit findings related to calibration and maintenance activities.
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • competitive benefits
  • discretionary bonuses
  • long-term incentive
  • Fulltime
Read More
Arrow Right

Sr. Engineer, Manufacturing Engineering

Being an Engineer at Baxter means you play a critical role in helping us achieve...
Location
Location
Malta , Marsa
Salary
Salary:
32000.00 EUR / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering (Mechanical, Electrical, Manufacturing, or related field)
  • Minimum 3+ years of experience in a manufacturing environment
  • Strong ability to analyze statistical and process data and translate insights into actionable improvements
  • Experience with process improvement methodologies and tools (e.g., FMEA, SPC, Lean principles)
  • Ability to manage multiple priorities in a fast-paced manufacturing environment
  • Ability to work in a regulated environment and ensure compliance with quality and safety standards
  • Strong problem-solving skills with a proactive and resourceful mindset
  • Effective communication and collaboration skills to work with cross-functional teams and external partners.
Job Responsibility
Job Responsibility
  • Perform routine and non-routine calibration and maintenance activities for analytical laboratory instruments in accordance with approved procedures and schedules
  • Plan, schedule, and manage calibration and maintenance activities performed by external service providers or equipment manufacturers, including supplier-calibrated instruments
  • Review service reports and calibration certificates to ensure completeness, accuracy, and compliance with internal procedures and regulatory expectations
  • Provide technical support in the event of instrument malfunctions or failures, including troubleshooting, root cause identification, and coordination with equipment manufacturers or service providers to resolve issues
  • Collaborate closely with Quality team members to ensure calibration and maintenance activities are aligned with quality system requirements, including data integrity, documentation standards, and change management processes
  • Ensure adherence to applicable Quality Systems, GLP principles, and regulatory requirements
  • actively participate in audit preparation, inspections, and responses to audit findings related to calibration and maintenance activities.
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Fulltime
Read More
Arrow Right

Manufacturing Engineer, Electrical

The Manufacturing Engineer, Electrical provides daily support of the manufacturi...
Location
Location
United States , Burnsville
Salary
Salary:
65000.00 - 90000.00 USD / Year
imricor.com Logo
Imricor Medical Systems
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Science in Electrical Engineering
  • 0-3 years' experience in medical device or equipment manufacturing
  • Must enjoy hands-on product exposure
  • Ability to interpret engineering drawings and schematics
  • Multi-tasking, problem solving and strong communication skills a must
  • Familiarity with regulated environments
  • Ability to effectively communicate verbally or in writing.
Job Responsibility
Job Responsibility
  • Authors clear and easy-to-follow manufacturing and test procedures
  • Drives continuous improvement projects to ensure all manufacturing and test processes are robust and optimized
  • Sources and implements equipment needed to support scale of manufacturing
  • Serves on cross-functional project teams for certain hardware products
  • Troubleshoots problems, identifies root cause, and drives corrective actions day to day
  • Develops and supports manufacturing and tests processes and equipment validations
  • Maintains positive and cooperative communication and collaboration cross functional
  • Keeps management informed of key developments and potential issues, ensuring timely communication and coordination of plans and activities to promote a collaborative and efficient team environment
  • Performs related work as apparent or assigned.
What we offer
What we offer
  • Medical
  • Dental
  • Vision
  • Health Savings Accounts
  • Health Care & Dependent Care Flexible Spending Accounts
  • Disability Benefits
  • Life Insurance
  • Retirement Benefits
  • Fulltime
Read More
Arrow Right

Loose Piece Reflash Solutions Engineer – Global Manufacturing Electrical & SDV

Global Manufacturing Electrical & SDV is looking for innovators who thrive in to...
Location
Location
United States , Warren
Salary
Salary:
Not provided
gm.com Logo
General Motors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Hands-on experience with ECUs, embedded systems, or in-vehicle software programming/flashing
  • Experience designing or working with hardware/software tools used for ECU communication, diagnostics, or reprogramming
  • Strong understanding of automotive communication protocols (e.g., CAN, CAN FD, Ethernet)
  • Experience using vehicle diagnostic and calibration tools (e.g., NeoVI, vSPY, DPS, or equivalent)
  • Experience developing or supporting ECU reflash or software deployment workflows (bench or vehicle-level)
  • Working knowledge of manufacturing and end-of-line (EOL) processes, including software flashing, validation, and issue resolution
  • Proven ability to troubleshoot software, hardware, and network interaction issues in vehicle or production environments
  • Experience collaborating across software, electrical engineering, and manufacturing teams to deliver integrated solutions
  • Willingness to travel (up to 50%) to support deployment across GM manufacturing sites
Job Responsibility
Job Responsibility
  • Design and build hardware and software tooling to support programming of multiple ECUs
  • Execute ECU flashing activities across GM manufacturing sites
  • Collaborate with manufacturing, engineering, and suppliers to understand and improve current reflash processes
  • Develop and deliver training for new team members and contractors, and create clear, standardized documentation
  • Promote a safe work environment and ensure compliance with all company policies, procedures, and regulatory requirements
  • Foster a forward‑thinking work culture that embraces change and proactively addresses future organizational and industry challenges
  • Build and maintain strategic relationships across software, manufacturing, and program management teams to align efforts and drive future innovation
What we offer
What we offer
  • Relocation benefits
  • Total Rewards
  • Fulltime
Read More
Arrow Right

Electrical Hardware Manufacturing Engineer

At General Motors, our product teams are redefining mobility. Through a human-ce...
Location
Location
United States , Warren
Salary
Salary:
Not provided
gm.com Logo
General Motors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3+ years of experience in electrical hardware development, manufacturing engineering, or automotive systems engineering
  • Strong understanding of electrical schematics, wiring diagrams, and hardware integration
  • Experience coordinating installation, validation, and support of electrical test equipment or manufacturing electrical systems
  • Excellent problem‑solving skills and attention to detail
  • Strong communication skills and the ability to lead cross‑functional teams
  • Familiarity with electrical testing, diagnostic equipment, and integration into manufacturing environments
Job Responsibility
Job Responsibility
  • Lead end‑to‑end project management for electrical hardware systems, ensuring on‑time delivery, cost alignment, and performance to requirements
  • Coordinate design, development, and integration of electrical hardware—working closely with mechanical, electrical, quality, software, and manufacturing teams
  • Oversee the introduction, commissioning, and validation of new electrical test equipment and system upgrades
  • Drive issue resolution by partnering with engineering and production teams to remove roadblocks and maintain program timing
  • Ensure electrical hardware systems meet manufacturing readiness, reliability expectations, and plant integration requirements
  • Maintain clear communication with stakeholders, providing regular status updates, risk assessments, and mitigation plans
  • Foster a forward‑thinking work culture that embraces change and adapts to evolving organizational and industry needs
  • Build and maintain strategic relationships across software, manufacturing, and program management to strengthen cross‑functional alignment
What we offer
What we offer
  • Relocation benefits may be eligible
  • Fulltime
Read More
Arrow Right