CrawlJobs Logo
Figure Logo Figure · IT - Software Development

Manufacturing End of Line Lead

United States, San Jose 150000.00 - 300000.00 USD / Year · Job Posted December 08, 2025
Apply Position
Job Link Share

Job Description

We are looking for a Lead Manufacturing Test Software Engineer to take ownership of our test architecture and strategy. In this role, you will drive design decisions, prioritize features, and mentor others as you lead the development of scalable, maintainable software for programming, calibrating, and validating modules at end-of-line. This is a highly technical role with a direct impact on build quality and throughput. You will work closely with manufacturing, hardware, and systems teams to ensure test coverage is robust, extensible, and able to evolve with rapid hardware iteration.

Job Responsibility

  • Architect and implement robust manufacturing test software for validating sensors, actuators, and subassemblies
  • Lead technical strategy and prioritization for EOL test automation, balancing speed, coverage, and maintainability
  • Coordinate test system design with EE, FW, Systems Integration and ME teams
  • Develop and maintain operator-facing GUIs for configuration, calibration, and data logging
  • Drive diagnostic visibility and failure analysis through software tools and system telemetry
  • Support builds on-site and at CMs, helping bring up and debug systems at the line
  • Ensure seamless integration with MES

Requirements

  • 10+ years of experience in test automation, hardware interfacing, or robotics software development
  • Strong coding skills in Python and C++, including hardware I/O and protocol integration
  • Familiarity with Linux, USB, UART, SPI, Ethernet, and embedded interfaces
  • Working knowledge of electronics and schematics
  • able to support light debug and fixture reviews
  • Strong communicator capable of aligning software and electrical efforts across EOL test projects
  • Experience building, scaling, or refactoring test systems across multiple product cycles
  • Understanding of MES/PLM integration or test traceability frameworks

Nice to have

  • Bachelor’s or higher in Software, Electrical, Controls, or Mechatronics Engineering
  • Experience leading multidisciplinary teams or mentoring across software/hardware boundaries
  • Previous work on mobile robots or electromechanical systems
  • Experience with fixture development workflows or CM deployment support
  • Strong background in electrical tester design
Figure - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Manufacturing End of Line Lead

8 matching positions

Principal Manufacturing Systems Engineer - Amgen Dun Laoghaire Project Delivery Lead

Join Amgen’s Mission of Serving Patients. At Amgen, if you feel like you’re part...
Location
Location
Ireland , Dun Laoghaire
Salary
Salary:
Not provided
amgen.com Logo
Amgen
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Doctorate degree in Engineering and 2 years of combined Information Systems and Manufacturing Process Automation experience
  • Master’s degree in Engineering and 4 years of combined Information Systems and Manufacturing Process Automation experience
  • Bachelor’s degree in Engineering and 6 years of combined Information Systems and Manufacturing Process Automation experience
  • Engineering, Information Systems, Computer and/or Software GMP-regulated industry background with experience leading projects and resources
  • 8+ years of experience in manufacturing, including 5+ in Pharma/Biotech industry
  • 5+ years of combined experience with Automation/ Process Control Systems (PCS), Manufacturing Execution System (MES) and/or laboratory systems or IS platforms
  • 5+ years of experience with packaging and/or filling line systems
  • Strong communication, leadership, and teamwork skills
  • Innovative, technically minded, and problem-solving abilities
  • Effective verbal, and written communication, and facilitation skills in the English language
Job Responsibility
Job Responsibility
  • Lead the execution and successful delivery of varied portfolio of IS/Automation projects with appropriate portfolio planning, resource and risk management and financial management for the portfolio
  • Accountable for end-to-end Technology projects delivery from the business case creation up to qualification and go live into manufacturing production
  • Ability to anticipate, evaluate and resolve multiple, simultaneous project issues, delays, and problems by utilizing technical, project management, and business expertise
  • Performs cross system analysis, feasibility analysis, scope projects, prioritize deliverables, and recommend optimal solution
  • Manage multiple initiatives and priorities
  • Ability to translate strategic opportunities and emerging technology solutions into tangible pragmatic executable plans allied to the ability to apply corporate blueprint and standards using business drivers to local business needs and project requirements
  • Effectively manage relationships with Peers, IS service owners, business partners, enterprise IS service partners, and vendors
  • Communicates with multiple levels within the organization, highlighting issues and proposing solutions
  • Accountable to elicit and analyze needs identified by business stakeholders and convert them into functional design
What we offer
What we offer
  • A comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts
  • A discretionary annual bonus program, or for field sales representatives, a sales-based incentive plan
  • Stock-based long-term incentives
  • Award-winning time-off plans
  • Flexible work models, including remote and hybrid work arrangements, where possible
  • Fulltime
Read More
Arrow Right

Operations Program Manager

The Operations Program Manager is the Single Threaded Leader (STL) for their cor...
Location
Location
United States , Sunnyvale
Salary
Salary:
168000.00 - 234000.00 USD / Year
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 7+ years experience managing supplier technical operations
  • Broad understanding of optical & mechanical technologies, and demonstrated experience with deployment of manufacturing processes to support complex technologies
  • Experience working on New Technology Introduction (NTI)
  • Data-driven problem solving skills to address multi-dimensional problems with high levels of uncertainty across multiple functional teams
  • Demonstrated technical, strategic and commercial skills required to deliver new technologies
  • Experience in communicating effectively with a broad range of stakeholders, collaborators and clients, at different levels
  • Experience with defining and implementing systems/tools and mechanisms to bridge integration mechanics between internal and external partners
  • Ability to travel at least 25% on-site to suppliers during critical bring-up and build activities
Job Responsibility
Job Responsibility
  • Accountable for end to end manufacturing operations at suppliers to execute development builds per schedule, leading up to ramp and into mass production
  • Establish the appropriate engagement model and define roles and responsibilities between supplier and internal cross functional teams
  • Drive supplier readiness activities to execute development builds leading up to ramp, including design & layout of manufacturing lines, development of process qualifications plans, and defining capacity & capex requirements, while clearly identifying deliverables and dependencies
  • Drive Operations teams to ensure materials, equipment, fixtures, systems, staffing, security, training and documentation plans are in place at our manufacturing partners
  • Establish and lead on-site bring-up and integration activities, coordinating with both internal and external resources
  • Lead ramp availability with GSM, Manufacturing & Test, Quality, and other internal and external teams
  • Ensure the successful launch of products towards meeting its stated cost, quality, schedule, and availability goals
  • Assess, analyze, consolidate, and communicate risk and status clearly and succinctly to management, calling out key issues and presenting options for resolution to the cross-functional executive team through the new product reviews and other executive forums
  • Actively participate in Engineering design and technology development discussions, providing focus and direction to deliver scalable manufacturing solutions. Be the Operations owner for the partner’s decisions around equipment, tooling and fixture sub suppliers
  • Provide links from the US based Operations & Engineering teams to the manufacturing partners from various development builds through new product introduction
What we offer
What we offer
  • bonus
  • equity
  • benefits
  • Fulltime
Read More
Arrow Right

Production Supervisor

Reporting to the Unit or Operations Manager, The Production Supervisor will be r...
Location
Location
United Kingdom , Oxford
Salary
Salary:
Not provided
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Proven experience in direct line-management
  • Proven experience in end-to-end manufacturing process organisation
  • Proven experience in lean, investigational, and optimising projects
  • Pharmaceutical, process, industrial, chemical manufacturing, or related industry experience
  • English minimum equivalent to RQF Grade 2, EQF Grade 3 or SCQF Grade 5
  • Degree in life science, engineering (pharmaceutical, process, industrial, chemical), or equivalent
  • Cleanroom experience
Job Responsibility
Job Responsibility
  • Leading, driving and managing multiple manufacturing teams responsible for compounding any aseptically compounded product
  • Working within any grade A to D cleanroom and be fully conversant with the quality and working requirements of these areas and the equipment used within them
  • Ensuring compliance with the manufacturing license and quality systems
  • Driving manufacturing activities to ensure that they are aligned to the commercial business requirements
  • Reporting on daily production plan adherence and loss analysis, and other required Unit metrics
  • Developing and leading a collaborative, diverse and inclusive environment for all staff
  • Supporting Training completion, EHS activities and a culture of equipment optimisation and process Continuous Improvement
  • Being a continuous visible presence in the manufacturing areas leading by example and setting high standards of compliance to GMP and Company policies
  • Providing cover for the Unit / Operations manager when required including Leadership Team meetings
  • Monitoring, controlling, and adjusting manufacturing process as required to meet output requirements
What we offer
What we offer
  • Competitive total compensation package
  • Professional development opportunities
  • High importance placed on work life balance
  • Fulltime
Read More
Arrow Right

Operations Program Manager

The Operations Program Manager is the Single Threaded Leader (STL) for their cor...
Location
Location
China , Shanghai
Salary
Salary:
Not provided
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 7+ years experience managing supplier technical operations
  • Broad understanding of optical and mechanical technologies, and demonstrated experience with deployment of manufacturing processes to support complex technologies
  • Experience working on New Technology Introduction (NTIs)
  • Data-driven problem solving skills to address multi-dimensional problems with high levels of uncertainty across multiple functional teams
  • Good technical, strategic and commercial skills required to deliver new technologies
  • Interpersonal skills with the ability to communicate and influence leadership
  • Experience with defining and implementing systems/tools and mechanisms to bridge integration mechanics between internal and external partners
  • Ability to travel at least 35% on-site to suppliers during critical bring-up and build activities
Job Responsibility
Job Responsibility
  • Accountable for end to end manufacturing operations at suppliers to execute development builds per schedule, leading up to ramp and into mass production
  • Establish the appropriate engagement model and define roles and responsibilities between supplier and internal cross functional teams
  • Drive supplier readiness activities to execute development builds leading up to ramp, including design and layout of manufacturing lines, development of process qualifications plans, and defining capacity and capex requirements, clearly identifying deliverables and dependencies
  • Drive Operations teams to ensure materials, equipment, fixtures, systems, staffing, security, training and documentation plans are in place at our manufacturing partners
  • Establish and lead on-site bring-up and integration activities, coordinating with both internal and external resources
  • Lead ramp availability with GSM, Manufacturing and Test, Quality, and other internal and external teams
  • Ensure the successful launch of products towards meeting its stated cost, quality, schedule, and availability goals
  • Assesses, analyzes, consolidates, and communicates risk and status clearly and succinctly to management, calling out key issues and presenting options for resolution to the cross-functional executive team through the new product reviews and other executive forums
  • Actively participate in Engineering design and technology development discussions, providing focus and direction to deliver scalable manufacturing solutions. Be the Operations owner for the partner’s decisions around equipment, tooling and fixture sub suppliers
  • Liaison across multiple cross-functional teams to ensure product cost, manufacturability, reliability, product quality, safety and compliance, and delivery commitments are met
Read More
Arrow Right

Production Supervisor

Reporting to the Unit or Operations Manager, The Production Supervisor will be r...
Location
Location
United Kingdom , Oxford
Salary
Salary:
Not provided
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Proven experience in direct line-management
  • Proven experience in end-to-end manufacturing process organisation
  • Proven experience in lean, investigational, and optimising projects
  • Pharmaceutical, process, industrial, chemical manufacturing, or related industry experience
  • English minimum equivalent to RQF Grade 2, EQF Grade 3 or SCQF Grade 5
  • Degree in life science, engineering (pharmaceutical, process, industrial, chemical), or equivalent
  • Cleanroom experience
Job Responsibility
Job Responsibility
  • Leading, driving and managing multiple manufacturing teams responsible for compounding any aseptically compounded product
  • Working within any grade A to D cleanroom and be fully conversant with the quality and working requirements of these areas
  • Ensuring compliance with the manufacturing license and quality systems
  • Driving manufacturing activities to ensure alignment to commercial business requirements
  • Reporting on daily production plan adherence and loss analysis, and other required Unit metrics
  • Developing and leading a collaborative, diverse and inclusive environment for all staff
  • Supporting Training completion, EHS activities and a culture of equipment optimisation and process Continuous Improvement
  • Being a continuous visible presence in the manufacturing areas leading by example
  • Providing cover for the Unit / Operations manager when required
  • Monitoring, controlling, and adjusting manufacturing process as required to meet output requirements
What we offer
What we offer
  • Competitive total compensation package
  • Professional development opportunities
  • High importance placed on work life balance
  • Fulltime
Read More
Arrow Right

Manufacturing Test Lead

Microsoft Silicon, Cloud Hardware, and Infrastructure Engineering (SCHIE) is the...
Location
Location
United States , Mountain View
Salary
Salary:
139900.00 - 274800.00 USD / Year
https://www.microsoft.com/ Logo
Microsoft Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Doctorate in Electrical Engineering, Computer Science, Mechanical Engineering (Hardware) or related field AND 3+ years of enterprise computer, consumer electronics design or hyperscale supply chain systems experience OR Master's Degree in Electrical Engineering, Computer Science, Mechanical Engineering (Hardware) or related field AND 4+ years of enterprise computer, consumer electronics design or hyperscale supply chain systems experience OR Bachelor's Degree in Electrical Engineering, Computer Science, Mechanical Engineering (Hardware) or related field AND 8+ years enterprise computer, consumer electronics design or hyperscale supply chain systems experience OR equivalent experience
  • Ability to meet Microsoft, customer and/or government security screening requirements are required for this role. These requirements include but are not limited to the following specialized security screenings: Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud Background Check upon hire/transfer and every two years thereafter.
Job Responsibility
Job Responsibility
  • Define and lead end-to-end manufacturing test strategies for PCBAs, storage enclosures, and rack-level systems
  • Leads the development of test hardware, software, and firmware to validate the functionality of complex systems including GPUs, CPUs, and liquid-cooled platforms, ensuring alignment with product design and performance goals
  • Develop test plans and validation metrics for GPU-based platforms (e.g., NVIDIA HGX, GB200), covering bring-up, functional, performance, and stress diagnostics
  • Integrate AI/ML models to dynamically adjust test coverage based on historical data, product complexity, and risk profiles
  • Implement AI-driven anomaly detection systems to flag test escapes and reduce false positives in real time
  • Designs and delivers end-to-end test solutions, particularly for advanced liquid cooling technologies, addressing both macro and micro-level thermal transfer challenges (e.g., fluids, pumps, manifolds, connectors)
  • Collaborates across multidisciplinary teams—mechanical, electrical, process, and production engineering—to integrate test strategies early in the product lifecycle and ensure seamless execution during manufacturing
  • Defines and maintains test architecture and core test content, including reusable scripts and test cases, for both blade-level and rack-level systems, ensuring scalability and consistency across product lines
  • Monitors production yield and test data, identifies systemic issues, and drives root cause analysis and corrective actions to improve test coverage, product quality, and manufacturing efficiency
  • Assesses manufacturing test readiness before each NPI (New Product Introduction) build, conducting risk assessments and coordinating mitigation plans with internal and external stakeholders
  • Fulltime
Read More
Arrow Right

Head of APAC Supply Chain and Manufacturing

To reinvent an industry, you have to build the best team. Join Formlabs if you w...
Location
Location
China , Shenzhen
Salary
Salary:
Not provided
formlabs.com Logo
Formlabs GmbH
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience building and leading an organization
  • Have extensive hands-on manufacturing experience of consumer products
  • Can work with contract manufacturers and suppliers to ensure the highest quality product
  • Drive inefficiencies out of a manufacturing line without compromising quality
  • Are an expert in contracts, price negotiation, performance metrics, and oversight of contract manufacturers
  • Implement cutting-edge manufacturing processes to identify problems and rapidly adapt to evolving designs
  • Love data and perform sophisticated analytics to improve operations
  • Can travel to key manufacturing and supplier sites around the world
  • Are process oriented but ready to be agile and innovative
  • Are excited to join a fast-paced, bureaucracy averse startup with a flat organizational structure
Job Responsibility
Job Responsibility
  • Partner with US based leadership to define short term priorities between regions and long term roles and responsibilities between US and Asia based teams
  • Manage organization of 20+ employees responsible for end to end supply chain Functions
  • Develop strategic initiatives and sourcing roadmap to improve cost, quality, and performance of Formlabs supply chain
  • Own NPI timelines, factory readiness, and hold regular in-region ramp reviews
  • Build audit procedures and cadences to ensure high quality production
  • Work with your team to develop measurement technologies, control strategies, and manufacturing methods required to build high quality products
  • Manage all manufacturing equipment sourcing, evaluation, and bring-up
  • Build partnerships with critical suppliers and build resilience in the supply chain
  • Work with US based global supply managers to support supplier identification, development, negotiation and management
Read More
Arrow Right

Industrial Engineer-Maintenance

As a successful family-owned company on a path to global growth, the Brose Group...
Location
Location
United States , New Boston
Salary
Salary:
Not provided
brose.com Logo
Brose Fahrzeugteile
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Thirty-six months’ experience as Engineer, Maintenance Coordinator, or related, diagnosing and resolving failures of production equipment including track lines or end of line (EOL) testers, and defining or executing production line containment and corrective actions during high volume production of seat systems, or related.
Job Responsibility
Job Responsibility
  • Read, diagnose, and troubleshoot failures in production equipment electrical, mechanical, and control drawings and systems supporting production of automotive mechatronic seat systems including 2/4/6/8-way seats and cushion extensions
  • Diagnose, lead technical problem solving, and resolve failures of production equipment and cells including track lines, final assembly lines, and end of line (EOL) testers
  • Prepare and improve SolidWorks drawings of equipment and production equipment safety requirements
  • mechanical/electrical/electronic equipment installation
  • station and maintenance personnel human machine interfaces (HMIs)
  • workstation sensors, cameras and vision systems
  • PLCs
  • air pressure regulators
  • and CPU systems
  • Define and execute production line containment and corrective actions during high volume production of automotive mechatronic seat systems in manufacturing plant environment
What we offer
What we offer
  • Modern working environment
  • Competitive performance-based compensation
  • Health insurance
  • Attractive social and family-oriented programs
  • Comprehensive medical and insurance
  • Educational assistance
  • Variety of community outreach, family, and sporting events
  • Flexible working hours
  • Collaborative work environment
  • Wide range of development programs
Read More
Arrow Right