Maintenance Test Pilot (LUH-72) Job at Amentum (Daggett)

Job Description

The Maintenance Test Pilot (UH-72 A/B) utilizes flight test techniques to perform test flights of aircraft to measure performance and handling to determine airworthiness following maintenance or modifications.

Job Responsibility

Perform test flights and demonstrate aircraft proficiency upon completion of aircraft maintenance or modifications on aircraft
Determine in accordance with publications and procedures the airworthiness of aircraft prior to release for flight
Perform recovery flights and ferries aircraft to additional sites, such as depots
Perform troubleshooting procedures of aircraft on the ground and during flight and make appropriate write-ups or give verbal instructions to correct deficiencies
Verify forms and records used in the performance of maintenance to ensure they comply with work performed prior to ground or flight checks
Run-up aircraft for alert status to perform test on modifications
Deploy when required to support contract requirements when maintenance test flights are anticipated
Interpret meteorological data as it pertains to filing a flight plan for the navigational course of flight needed for a sortie and files a flight plan for all flights using authorized processes
Ensure proper documentation is chronicled
File flight plans for all flights using authorized navigational processes
Compute weight and balance logs for the aircraft being flown
Initiate and complete all military flight or maintenance forms to document maintenance test flight completion and discrepancies
Communicate, troubleshoot, advise, and work side by side with military pilots and technicians
Ferry flights as assigned
If qualified, may perform as site safety specialist and/or additional duties safety officer functions
May be designated as a Foreign Object Elimination/Foreign Object Debris (FOE/FOD) Program Administrator
May support AS9100-AS9110 internal audits, corrective action requests, assist section, department, and/or program in developing plans to correct identified shortfalls
May assist with continual improvement initiatives
Must be capable of Aircraft Technical Inspection (TI) as additional duty
Plan and conduct aircraft technical inspections
Inspect power plant hot section, cold section, and accessory modules
Operate and inspect pneudraulic systems including landing gear
Understand the fundamentals and inspection techniques of helicopter structural repairs
Perform troubleshooting and analyze electrical/electronic systems
Lectures, demonstrates, and conducts practical exercises in inspection techniques, procedures, performance evaluation, and operational checks on the power plant, structure, and systems of helicopters powertrains
Provides technical guidance to repairs performing aircraft and subsystem maintenance techniques and safety procedures
Maintains technical library, inspect systems, subsystems, and components according to applicable technical publications and checklists before, during and after airplane maintenance and modifications
Check and troubleshoot systems
Annotate records of required maintenance
Evaluate operational readiness of aircraft and recommend corrective action
Inspect crash-damaged aircraft and estimates time, parts, and costs to repair
Ensure compliance with aircraft configuration control, Army oil analysis program and test measuring and diagnostic calibration
Evaluate maintenance operations and facilities for compliance with directives, technical manuals, work standards, safety procedures, and operational policies
Performs maintenance trend analysis and applies production control, quality control and other maintenance management principles and procedures to aircraft maintenance operations
Maintains the supplies and perform preventive maintenance
Perform other qualified duties as requested
Adheres to company policies and safety programs (Safety-first mentality)

Requirements

Completed military flight and applicable training courses as required IAW 95-20
Must meet the qualification requirements of AR 95-20
Minimum of Ten (10) years of aviation maintenance experience required
Prefer a minimum of 1000 Hours of Pilot in Command time
Be proficient in flying operations of the aircraft they are assigned (UH-72)
Satisfactorily completed a proficiency check within the previous 12 months
Successfully complete initially and annually thereafter an FAA Class II flight physical
Possess an instrument rating on their FAA Commercial Certificates
Possess a current valid FAA Class II Medical Certificate
Successfully completed Army Maintenance Test Pilots Course (MTPC) or complete an equivalency evaluation IAW AR 95-1 and 95-20
Successfully completed the US Army Aircraft Maintenance Officers Course (AMOC) Phase II or complete an equivalency evaluation IAW AR 95-1 and 95-20
Must meet the experience requirements of AFR55-22, NOTAMS, AR95-10, AR95-20 and DCMA-8210 pertaining to each aircraft prior to acting in the capacity of pilot-in-command on maintenance test flights
1,000 or more hours of total flight time and have at least 300 hours in the same aircraft type and design and 100 hours in the assigned aircraft
Must be able to work, day shift, swing shift, night shift, and/or weekend shift (if applicable)
Must be eligible to obtain a Passport and be able to travel internationally (applicable to OCONUS work sites)
Must be able to obtain and maintain a (Secret Clearance) US Government Clearance
US Citizenship is required to obtain Secret Clearance
Must be able to obtain and maintain facility credentials/authorization
US Citizenship is required for facility credentials/authorization at this work location
Demonstrated proven and verifiable aviation experience including ethics, ability and professionalism of the highest standards are required for this position
Must have demonstrated communication skills, both oral and written
Must be fluent in the English language
Working knowledge for operating navigational and communication equipment installed on the aircraft
Capable of computing and annotating weight and balance logs for the aircraft

What we offer

Competitive benefits package
11 paid Holidays
Sick Leave
401K
Short Term / Long Term Disability
Flex Spending Programs- FSA/HSA
Employee Stock Option Purchasing Program
Medical /Dental/Eye Insurance
Life Insurance and AD&D
Well-being programs
Employee assistance programs
Tuition assistance
Voluntary Benefits-identity protection, Pet insurance, legal services, commuter benefits (where applicable), student loan programs

Amentum - All Job Offers

Select Country

Maintenance Test Pilot (LUH-72)

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Maintenance Test Pilot (LUH-72)

Branch Manager

Guest Environment Expert

Project Engineer

Sales Assistant

Sales / Project Estimator

Human Resources Coordinator

Showroom Sales Assistant - Flexible Hours

Human Resources Coordinator

Our AI answers in your language