Maintenance Technician Level II Job at Dot Foods (Burley)

Electronics Technician II (Radar Technician II)

The Electronics Maintenance Technician II (Tech II) supports maintenance, repair...

Location

United States , Fairbanks

Salary:

41.57 USD / Hour

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
technical training in electronics required
2-4 years of experience in electronics maintenance, repair, or operations
Familiarity with Radar and High-Power transmitters or similar systems preferred
Ability to interpret manufacturers' manuals, schematics, and technical documentation to solve routine problems
Proficiency with electronic test equipment, including spectrum analyzers, multi-meters, oscilloscopes, and signal generators
Strong understanding of AC/DC circuit interrelationships and judgment in planning work sequences
Ability to follow Air Force TOs and OEM standards
Strong communication and teamwork skills
Eligible for DoD security clearance. (Must be US Citizen)

Job Responsibility

Perform maintenance activities including periodic, scheduled, unscheduled, and preventative maintenance following TOs and OEM documentation
Troubleshoot and resolve routine electronic issues using manufacturers' manuals and advanced technical knowledge
Replace components, wire circuits, and repair more complex electronic systems with limited supervision
Operate and prepare threat systems, including radars and supporting equipment, for training events, ensuring threat-faithful operations during JPARC missions
Use testing instruments such as spectrum analyzers, digital multi-meters, oscilloscopes, and signal generators to diagnose and verify system functionality
Plan work sequences, select appropriate tools, and ensure maintenance tasks are compliant with accepted practices
Maintain job completion logs and system reports
Track, manage, and maintain sufficient spares inventory to ensure operational readiness
Interface with Air Force depot systems to report on supported threat systems and ensure accurate status updates
Submit reports including Proposed Spare Parts Lists and Inventory/Utilization Data

What we offer

$6000 Annual Cold Weather Bonus

Fulltime

Technician II, Maintenance

Due to continuous growth, CommScope is looking to hire a <Technician I, Maintena...

Location

India , Verna, Goa

Salary:

Not provided

CommScope

Expiration Date

Until further notice

Requirements

BE in Electronics/ Electrical / Mechanical/ Industrial Engineering with 1-3 years of work experience
Diploma in Electronics/ Electrical / Mechanical/ Industrial Engineering with 3-5 years of work experience
Experience in Installation, Commissioning, PM & breakdown of Equipment’s, Fiber optic/cable machinery and related auxiliary equipment
Should have undergone courses in electrical control systems & industrial automation
Should have sound understanding of hydraulic & pneumatic systems
Capability to independently handle the shift for the above activities
Programming of PLCs, drives
Basics of Fiber Optics
High level of skill and knowledge in manufacturing/production environment with demonstrated ability to function in a leadership role
Very good interpersonal and communication skills

Job Responsibility

Executing PMs as per schedule
Attending and closing break down calls & keeping the breakdown time under control
Controlling MTBF & MTTR
Escalating any pending jobs to higher ups
Following all the safety norms and ensuring no norms are violated in any process
Maintaining 5S standards of the highest level
Keeping track of spare consumption and highlighting any deviations
Adherence to all compliances
Maintain maximum uptime of the machinery
Quick troubleshooting on equipment

Fulltime

Aircraft Maintenance Technician II - C130

Definition: This is the journey and second working level for certificated Airfra...

Location

United States , McClellan

Salary:

59.03 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

FAA Airframe & Powerplant Technician’s Certificates
valid Class-C Driver’s License
three years of aerospace industry work experience as a certificated A&P Technician
two years’ experience working on type specific aircraft
Military experience may qualify if the level of work and responsibility was equal to that of a certificated A&P Technician
Prior OEM or other outside training and experience on C-130 variant aircraft may satisfy the one-year of CAL FIRE specific aircraft requirement
Current CAL FIRE Aviation Program Aircraft Maintenance Technician II who obtain one year of experience and current CAL FIRE Aviation Program Aircraft Maintenance Technician I who obtain two years of experience working on C-130 aircraft and successfully complete Original Equipment Manufacturer or other certified outside vendor for line and intermediate level training specific to the aircraft may be eligible for promotion to this position

Job Responsibility

Inspect and repair aircraft, engines, components and systems and assess for damage, condition and method of repair, and work off site at outlying field locations, which may include assignment as a base mechanic
May perform Confined Space Entry maintenance to include aircraft fuel tank repairs
May be required to become engine/taxi-run qualified and demonstrate proficiency in their respective program(s) aircraft ground operations
Work independently in a central aviation maintenance facility or work unsupervised off site at outlying field locations
Perform depot level and field maintenance to aircraft, engines, propellers, rotors, components and systems in accordance with approved procedures
Have a thorough working knowledge of all fleet aircraft, engines, and airframe systems
Ability to inspect and determine problems and correct deficiencies, inspect aircraft and systems for continued airworthiness, and return aircraft to service after major and minor maintenance and repair

What we offer

Competitive benefits package

Fulltime

Industrial Maintenance Technician II

Amentum is seeking an Industrial Maintenance Technician to join our team of mult...

Location

United States , Waukesha

Salary:

25.00 - 33.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

1-3 Years Industrial experience and knowledge
Requires the ability to regularly lift up to 50 lbs
Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift
Requires the flexibility to bend/stoop, squat repetitive during shift
Requires the ability to regularly kneel repetitive for shift
Requires the ability to move in a 90-degree fashion on a repetitive basis for shift
Requires the ability to stretch/reach on a repetitive basis for shift
Requires the ability to walk extensively throughout the plant during shift
Requires the use of a Company/Client approved utility knife
Requires the ability to differentiate colors pertaining to wire color-coding

Job Responsibility

Performing inspections
checking sprockets, chains, motors, gearboxes, bearings and related mechanisms in an industrial production setting
lubrication
cleaning
filter changes
minor repairs to equipment
Data gathering for predictive maintenance technologies including oil analysis, vibration analysis, ultrasound analysis and infrared thermography analysis
Lubricates moving parts with specified lubricants
Work in conjunction with the Reliability Engineer to ensure all Predictive Maintenance work orders are completed on time and correctly
Perform corrective actions from findings generated from Predictive Maintenance technologies

What we offer

Health insurance
Dental insurance
Vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance

Fulltime

General Maintenance Technician Ii (2nd Shift)

Amentum is seeking a motivated General Maintenance Technician II to join our 2nd...

Location

United States , Lafayette

Salary:

20.00 - 23.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
1+ year of experience in maintaining buildings, facilities, or equipment in an industrial/commercial environment OR an equivalent combination of education and experience
Ability to safely work on and around 480V 3-phase electrical systems
Ability to work from aerial or scissor lifts at heights of up to 30 feet
Successfully pass a pre-employment substance abuse test
Valid Driver's License (if required by the client)
U.S. work authorization (sponsorship not available)
Ability to obtain a security access badge for worksite entry

Job Responsibility

Perform troubleshooting, repairs, and preventive maintenance on facility equipment and systems, including: Lighting systems, conveyor systems, overhead cranes, R.O. systems, dock locks, and levelers
Pumps, piping, seals, and valves
Forklifts, industrial batteries, and HVAC systems (VAVs, AHUs)
Maintain and repair facility structures, including walls, flooring, windows, doors, hardware, and roofing systems
Assemble and install shelving, cabinets, and office furniture
Conduct preventive maintenance activities as scheduled in the Computerized Maintenance Management System (CMMS)
Troubleshoot and repair mechanical systems, including motors, compressors, plumbing, and water systems
Respond to customer service requests while ensuring compliance with regulations, codes, and standards
Safely operate various equipment (e.g., forklifts, hoists, aerial lifts, and diagnostic tools) to perform maintenance tasks
Adhere to proper safety procedures, such as job hazard analysis, lockout/tag-out, and PPE use

What we offer

Benefits beginning Day 1
Growth opportunities
Safe work environment
Team focused environment
Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan

Electronics Maintenance Technician II

The Electronics Maintenance Technician II (Tech II) supports maintenance, repair...

Location

USA , Fairbanks

Salary:

41.57 USD / Hour

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
technical training in electronics required
2-4 years of experience in electronics maintenance, repair, or operations
Familiarity with Radar and High-Power transmitters or similar systems preferred
Ability to interpret manufacturers' manuals, schematics, and technical documentation to solve routine problems
Proficiency with electronic test equipment, including spectrum analyzers, multi-meters, oscilloscopes, and signal generators
Strong understanding of AC/DC circuit interrelationships and judgment in planning work sequences
Ability to follow Air Force TOs and OEM standards
Strong communication and teamwork skills
Eligible for DoD security clearance

Job Responsibility

Perform maintenance activities including periodic, scheduled, unscheduled, and preventative maintenance following TOs and OEM documentation
Troubleshoot and resolve routine electronic issues using manufacturers' manuals and advanced technical knowledge
Replace components, wire circuits, and repair more complex electronic systems with limited supervision
Operate and prepare threat systems, including radars and supporting equipment, for training events, ensuring threat-faithful operations during JPARC missions
Use testing instruments such as spectrum analyzers, digital multi-meters, oscilloscopes, and signal generators to diagnose and verify system functionality
Plan work sequences, select appropriate tools, and ensure maintenance tasks are compliant with accepted practices
Maintain job completion logs and system reports
Track, manage, and maintain sufficient spares inventory to ensure operational readiness
Interface with Air Force depot systems to report on supported threat systems and ensure accurate status updates
Submit reports including Proposed Spare Parts Lists and Inventory/Utilization Data

What we offer

$6000 Annual Cold Weather Bonus

Fulltime

General Maintenance Technician II

Summit Skilled Solutions is seeking a skilled and dependable General Maintenance...

Location

United States , Jenks

Salary:

23.00 - 27.00 USD / Hour

Summit Skilled Solutions

Expiration Date

Until further notice

Requirements

High school diploma or equivalent required
Minimum of 4 years of maintenance experience in a commercial or industrial setting
Valid driver's license required
Forklift and aerial lift certifications preferred or required
Proficient in using hand tools and power tools
Ability to disassemble and reassemble mechanical systems such as pumps, fans, and HVAC equipment
Working knowledge of plumbing, electrical, and carpentry systems
Understanding of building systems including HVAC, electrical, plumbing, and life safety systems
Experience operating forklifts and aerial lifts
Basic computer proficiency, including email and maintenance management systems (CMMS/BAS)

Job Responsibility

Adhere to all safety standards, including OSHA regulations and lockout/tagout procedures
Perform routine shift rounds to inspect systems, identify issues, and document performance
Troubleshoot, maintain, and repair facility systems and equipment independently and as part of a team
Conduct inspections of operating systems, including monitoring pressure, speed, vibration, and wear
Perform preventative maintenance and replace consumable components (belts, filters, fluids, etc.)
Maintain and repair HVAC systems, plumbing, electrical systems, and fire/life safety equipment
Maintain and repair motors, transformers, MCC panels, circuits, and variable frequency drives
Maintain and repair dock equipment (overhead doors, dock levelers, seals, and locks)
Maintain and repair interior and exterior lighting systems, including emergency and exit lighting
Execute repairs such as rebuilding pumps, valves, steam traps, and solenoid devices

Fulltime

HVAC Maintenance Technician II

Your Mission: To provide a safe and attractive living environment for campus res...

Location

United States , Sun City West

Salary:

40.00 - 44.23 USD / Hour

Sun Health

Expiration Date

Until further notice

Requirements

A minimum one year of experience as an HVAC technician, maintenance, and repair experience required
Experience with fully automated central plants and four pipe systems is required
EPA 608 Certification - minimum requirement of a Type I and Type II required. Universal preferred
Possess current or have the ability to obtain a Level 1 Fingerprint Clearance Card is required
Ability to work from sketches, plans, drawings, blueprints and specifications
ability to effectively present information and convey knowledge and understanding
Ability to work with high voltage (460volts) electricity and equipment to troubleshoot and complete repairs
An understanding of chemical balancing for cooling towers and closed looped systems

Job Responsibility

Installs, operates, and maintains heating, air conditioning, refrigeration systems, commercial kitchen equipment, energy management systems, chillers, water cooling towers, and boilers
conducts regular preventive maintenance inspections and makes necessary adjustments or repairs
Repairs or replaces defective parts in units and equipment including a variety of controls and systems. Work with high and low voltage electric and communication systems including nurse call, fence detection, CO2 exhaust fan systems, door entry panels, and fire alarm systems
Installs, repairs, and maintains plumbing with various water systems as necessary
plumbing of refrigeration and air conditioning systems
flushes boilers, de-scales equipment
rebuilds water pumps assembles. Understands and monitors correct cooling tower and fluid cooler chemical levels
Perform rounds and inspections on mechanical equipment including but not limited to chillers, boilers, pumps, electric motors, cooling towers, generators, water meters, etc. to identify and correct potential problems before they arise
Receives and completes work orders
prepares and researches cost estimates for projects

What we offer

Comprehensive health benefits (Medical, Dental & Vision)
401k with immediate vesting and up to 4% employer match
Tuition Reimbursement
Exclusive discounts through The Employee Network
Access to the Employee Association, supporting team members in need

Fulltime

Select Country

Maintenance Technician Level II

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?