Maintenance Technician - Engineering Job at Flannels (Shirebrook)

Maintenance Engineering Technician II

As Maintenance Engineering Technician II, you will provide maintenance required ...

Location

United States , Zebulon

Salary:

Not provided

GSK

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
Minimum 6 years of industrial maintenance or automation experience
Hands-on experience with hydraulic, pneumatic, electrical, electronic or mechanical systems
Experience troubleshooting industrial automation, instrumentation and controls
Experience working under Good Manufacturing Practices (GMP) or similar regulated environment
Experience using an enterprise maintenance system such as SAP for work orders and history

Job Responsibility

Respond to daily production equipment failures by efficient trouble shooting and initiation of repairs
Encourage consistent safety behavior by starting all shift handovers with EHS updates/concerns
Support maintenance coordinator by performing maintenance activities as instructed
Coordinate with the maintenance planner to execute area PM’s on time with focus on zero Y3’s
Maintain high level of 5S standards and work practices of all production and shop areas
Support equipment efficiencies through participation in weekly maintenance data review and continuous improvement projects
Participate in RCA’s required for area performance management
Performs all duties in accordance with Zebulon Safety Procedures, cGMPs and is subject to the scrutiny of regulatory agencies
Support zero accidents, zero defects, and zero waste by supporting the maintenance supervisor in key equipment process evaluations and initiatives
Offer support to the equipment engineering staff in execution of equipment installation, commissioning, FAT’s, and validation IQ/OQ testing

What we offer

Competitive base salary
Annual bonus based on company performance
Flexible working options available for most roles
Learning and career development
Access to healthcare & wellbeing programmes
Employee recognition programmes
Onsite cafeteria
Onsite gym
Temperature-controlled climate
Licensed, onsite Health & Wellness clinic

Fulltime

Engineering Maintenance Technician Apprentice

Build Your Engineering Career in Lubrication Manufacturing. Are you interested i...

Location

United Kingdom , Gravesend

Salary:

18000.00 - 19000.00 GBP / Year

360 Resourcing Solutions

Expiration Date

Until further notice

Requirements

Interest in engineering or manufacturing
Practical mindset and problem-solving ability
Positive attitude and willingness to learn
Strong teamwork and communication skills
Commitment to working safely and following procedures

Job Responsibility

Supporting maintenance and repair activities across the manufacturing site
Assisting with electrical and mechanical fault finding
Helping maintain pumps, motors, valves, conveyors, and production equipment
Supporting planned preventative maintenance programmes
Learning engineering safety procedures and industry standards
Using engineering tools, equipment, and digital maintenance systems

What we offer

Level 3 Engineering Maintenance Technician qualification
Hands-on engineering experience in manufacturing
Structured development and mentoring
Exposure to electrical and mechanical maintenance
Long-term career opportunities within engineering and maintenance
Competitive salary and benefits package
Excellent progression opportunities within engineering and manufacturing

Fulltime

Flight Simulator Maintenance Technician / Senior Technician

Airbus Asia Training Centre (AATC) is currently looking for a Flight Simulator M...

Location

Singapore

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Higher Educational Qualification in Electronic or Aeronautical Engineering discipline
Innovative, resourceful, logical and compliant
Excellent command of IT and keeps abreast of technological advancements
Team fit and effective communicator
Customer oriented focus
Able to perform shift work
Workshop practices basics e.g. soldering, drilling, fastening

Job Responsibility

Personally accountable for high quality and timely actions when performing trouble-shooting interventions following FSTD failures or reports of discrepancies
Accountable for performing ad-hoc technical trouble-shooting, sometimes without immediate supervision, to minimize the time lost and disruption to FSTD users
Prepares training devices for daily operation and follows maintenance activities or between user sessions
Promptly communicates to line management on all matters for their attention
Ensures clear and effective communication when completing DR comments & Work Orders
Ability to interact effectively with users to help determine root causes of failures and discrepancies
Ensure training devices operate at the correct level required by customers through timely configuration changes and software updates when applicable
Complies with the Compliance Monitoring System at all times
Conducts tests, checks and other preventive maintenance activities in accordance with the preventive maintenance schedules and notify line management of discoveries and trends that may lead to future failures
Identify competency deficiencies and request assistance through line management

Fulltime

Flight Simulator Maintenance Technician / Senior Technician

Airbus Asia Training Centre (AATC) is currently looking for a Flight Simulator M...

Location

Singapore

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Higher Educational Qualification in Electronic or Aeronautical Engineering discipline
Innovative, resourceful, logical and compliant
Excellent command of IT and keeps abreast of technological advancements
Team fit and effective communicator
Customer oriented focus
Able to perform shift work
Workshop practices basics e.g. soldering, drilling, fastening

Job Responsibility

Personally accountable for high quality and timely actions when performing trouble-shooting interventions following FSTD failures or reports of discrepancies
Accountable for performing ad-hoc technical trouble-shooting, sometimes without immediate supervision, to minimize the time lost and disruption to FSTD users
Prepares training devices for daily operation and follows maintenance activities or between user sessions
Promptly communicates to line management on all matters for their attention
Ensures clear and effective communication when completing DR comments & Work Orders
Ability to interact effectively with users to help determine root causes of failures and discrepancies
Ensure training devices operate at the correct level required by customers through timely configuration changes and software updates when applicable
Complies with the Compliance Monitoring System at all times
Conducts tests, checks and other preventive maintenance activities in accordance with the preventive maintenance schedules and notify line management of discoveries and trends that may lead to future failures
Identify competency deficiencies and request assistance through line management

Fulltime

Electrical Maintenance Technician

SRG are currently looking for a skilled Electrical Engineering Technician to joi...

Location

United Kingdom , Harlow

Salary:

Not provided

SRG

Expiration Date

Until further notice

Requirements

Apprenticeship or Level 3 NVQ in Electrical Engineering (or equivalent)
Qualified to 18th Edition Wiring Regulations
CompEx certification (minimum ExF) - ideally Ex01-Ex06
Experience with Control & Instrumentation (C&I) is highly desirable
Strong experience in fault finding and problem solving on industrial equipment
Good working knowledge of process machinery and plant systems.

Job Responsibility

Perform planned and breakdown maintenance on a range of process and plant equipment
Diagnose faults and carry out effective and timely repairs to minimise downtime
Ensure all maintenance activities comply with safety, environmental, and operational standards
Accurately complete maintenance logs, job cards, and CMMS records (e.g. SAP)
Support equipment reliability and plant availability targets
Assist with maintenance planning, parts identification, and stock control
Liaise with engineering, maintenance, and production teams to ensure smooth operations
Provide clear shift handovers and communicate ongoing work effectively
Support and oversee external contractors when required

Fulltime

New

Maintenance Technician (Weekends Shift)

This position is responsible for maintaining plant’s food manufacturing equipmen...

Location

United States , Toluca

Salary:

Not provided

Ajinomoto Foods North America, Inc.

Expiration Date

Until further notice

Requirements

Associate Degree or other technical degree in Electrical Engineering, Mechanical Engineering or Technology or the equivalent combination of education and experience
1-3 years of proven work experience on electrical/electronic systems, mechanical systems, hydraulic and pneumatic systems is required with the ability to demonstrate high proficiency in these areas
Functional knowledge of standard manufacturing practices including, but not limited to: general safety, lock-out tag-out, forklift safety, ARC Flash and electrostatic discharge awareness
Electrical skills in troubleshooting and repairing 480/230 v 3ph.120 v and 24v systems with the ability to read and understand schematics, blue prints and PLC ladder logic
Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators in order to assist with repairs and troubleshooting
Must possess a high level of written and verbal communication skills, critical thinking and problem solving skills
Must have working knowledge of testing equipment and devices including the use of Multi-meter, Thermal imaging camera, and basic hand and power tools
Experience and ability to work in a fast-paced manufacturing environment
Basic computer skills is required (Microsoft windows, MS Office Suite and outlook email)
Welding and fabrication experience is a plus

Job Responsibility

Maintains, troubleshoots and repairs various production equipment systems and devices and performs regular preventive maintenance as planned
Performs regular equipment checks and completes the required predictive checklists to identify early signs of potential equipment failures and minimize unplanned downtime and identify opportunities for improvement
Collaborate within the immediate supervisor and maintenance planner to schedule and develop inspection routines and preventative maintenance schedules
Performs new installations and relocations of new/existing equipment, regular and emergency startups and shutdowns of equipment in accordance with company standard operating procedures and safety requirements
Assist Team Leaders and line Operators in efficient line start up and equipment adjustments
Assist other maintenance department staff with technical troubleshooting
Keeps supervisor and/or manager up to date on all on-going work assignments, provides consistent updates in regards to project status, completion time projections, and any problems that may have arisen during the course of the project
Performs high quality work that meets industry accepted maintenance practices to maintain compliance with external regulatory agencies
Continues to develop maintenance technical skills within mechanical, electrical, controls, hydraulic, pneumatic, welding and fabrication skillset
Increases equipment specific knowledge for maintenance activities on factory equipment such as cook kettles, pumps, mixers, food formers, ovens, fillers, food assembly equipment, fryers, primary packaging equipment such as wrappers, secondary packaging equipment such as formers and closers, metal detectors and palletizing equipment

Fulltime

Maintenance Technician 2 – Weekend Position

Husco Offers $1,000 New Hire Bonus, Weekly Pay, $2.00 shift premium, Raise after...

Location

United States , Whitewater

Salary:

Not provided

Husco

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
Demonstrated competency in mechanical and electrical repairs
Valid driver's license and forklift certification
Strong troubleshooting, communication, and problem-solving skills
Adaptability and teamwork
Intermediate PC knowledge
Ability to lift up to 50 lbs and perform work on ladders and elevated platforms

Job Responsibility

Perform and Document Repairs: Conduct preventative maintenance, routine, and emergency repairs to support production and facility equipment, ensuring safety and effective communication with management and peers
Troubleshoot and Repair Systems: Work on mechanical, electrical, pneumatic, and hydraulic systems, including CNC machines (Okuma MA600HB/Makino a61nx-a81nx), assembly line equipment, automated assembly/test equipment, and general facility infrastructure
Operate Fabrication Tools: Utilize tools such as lathes, mills, and drill presses for part repair and modification
Industrial Waste Management: Ensure proper handling and disposal of hazardous and universal waste in compliance with regulations
Technical Documentation: Read and interpret technical documents, including schematics and equipment manuals
Independent Work: Maintain high standards of quality and efficiency while working independently
Suggest Improvements: Propose enhancements to equipment and manufacturing processes to improve uptime, reliability, and safety
Assist Engineering Team: Collaborate on special projects with the engineering team

What we offer

$1,000 New Hire Bonus
Weekly Pay
$2.00 shift premium
Raise after 90 days
10 days of paid vacation & 12 days of paid holidays
Health, Dental, & Life Insurance offered for full-time Employees
Gym/Wellness Reimbursement
Parental leave
401K retirement contribution and company match up to 4%
100% tuition reimbursement

Fulltime

Maintenance Technician 2

Join us and be part of a team that values quality, efficiency, and continuous im...

Location

United States , Whitewater

Salary:

Not provided

Husco

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
Demonstrated competency in mechanical and electrical repairs
Valid driver’s license and forklift certification
Strong troubleshooting, communication, and problem-solving skills
Adaptability and teamwork
Intermediate PC knowledge
Ability to lift up to 50 lbs and perform work on ladders and elevated platforms

Job Responsibility

Perform and Document Repairs: Conduct preventative maintenance, routine, and emergency repairs to support production and facility equipment, ensuring safety and effective communication with management and peers
Troubleshoot and Repair Systems: Work on mechanical, electrical, pneumatic, and hydraulic systems, including CNC machines (Okuma MA600HB/Makino a61nx-a81nx), assembly line equipment, automated assembly/test equipment, and general facility infrastructure
Operate Fabrication Tools: Utilize tools such as lathes, mills, and drill presses for part repair and modification
Industrial Waste Management: Ensure proper handling and disposal of hazardous and universal waste in compliance with regulations
Technical Documentation: Read and interpret technical documents, including schematics and equipment manuals
Independent Work: Maintain high standards of quality and efficiency while working independently
Additional Responsibilities: Suggest Improvements: Propose enhancements to equipment and manufacturing processes to improve uptime, reliability, and safety
Assist Engineering Team: Collaborate on special projects with the engineering team

What we offer

$1,000 New Hire Bonus
Weekly Pay
$2.00 shift premium
Raise after 90 days
10 days of paid vacation & 12 days of paid holidays
Health, Dental, & Life Insurance offered for full-time Employees
Gym/Wellness Reimbursement
Parental leave
401K retirement contribution and company match up to 4%
100% tuition reimbursement

Fulltime

Select Country

Maintenance Technician - Engineering

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?