Maintenance Technician (CRS) Job at Evonik Industries (Tuas)

Quality Engineer, Airworthiness Compliance

WE’RE LOOKING FOR A QUALITY ENGINEER, AIRWORTHINESS COMPLIANCE. Ensure complianc...

Location

Canada , Fort Erie

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Aerospace, Aviation, Engineering or equivalent related field experience
TCCA Aircraft Maintenance Engineer License (AME)
10 years related Quality inspection on Aircraft components and systems
In lieu of degree, 15 years combined experience in a Quality Assurance capacity and/or as a certificated aviation maintenance technician (AMT) and/or (AME)
Airbus H125, H130, H135 Type Rated Training
Ability to interpret technical and regulatory documentation
Ability to effectively communicate verbally and in writing with all levels of personnel
Familiar with inspection tools, aids and devices used in determining tolerances and specification limits
Have the experience and flexibility to work in multiple areas
Must have the ability to interface with the external customer in regards to aircraft and aircraft records presentation at delivery

Job Responsibility

Ensure compliance with Transport Canada Civil Aviation (TCCA) CAR 571 and 573 regulations for Aircraft airworthiness, return to service after maintenance, repair or alterations
Support quality inspectors in the daily activities related to maintenance, coordination of Aircraft & Engine Calendar and/or hourly inspections, repairs, alterations and conformity inspections of aircraft parts, paint and related Backshop, Maintenance Repair and Overhaul (MRO) activities
Act as a quality interface between internal and external customers for nonconformance resolutions and customer aircraft delivery activities
Airworthiness Compliance: Responsible for representing the Certified Repair Station (CRS) or Transport Canada Civil Aviation Approved Maintenance Organization (AMO) for U.S aeronautical products maintained under Bilateral agreement between Canada and United States for the approval of Aircraft, Airframe, Aircraft engine(s), propellers/rotors, appliances or component parts for return to service (RTS) after undergoing inspection, maintenance, preventive maintenance, rebuilding or alterations and for making an entry in the applicable maintenance records with content, form and disposition acceptable to TCCA administrator and Airbus company RTS procedures
Compile comprehensive list of airworthiness directives, alert service bulletins and optional service bulletins, document preservation, maintenance or inspections of Aircraft, Engine(s), Dynamic components, Main or Tail rotor blades, component changes as applicable in respective component log cards for final conformity of Aircraft
Issue TCCA Form Ones, conformity inspection records, airworthiness approvals of new products and articles, return to service of inspected products and articles, that conform to the approved type design requirements and are in a condition for safe operation using procedures
Validation of inspection and/or compliance of life limited, cycle limited components, airworthiness directives, Emergency alert and alert service bulletins for applicable airframe, engine(s) and component calendar and/or hourly technical inspections per applicable manufactures recommended, TCCA/ AMM/ICA approved continuous airworthiness inspection programs
Ensure the state of preservation for Airframe and Engine(s) are reviewed for proper application and current with applicable intervals and carry on calendar maintenance intervals
Validation of testing of emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators, Air Data Computers, aircraft static pressure systems and automatic pressure altitude reporting systems in accordance with applicable TCCA regulations
Witness functional/operational tests, check-outs, and adjustments of aircraft radios and navigational instruments

Fulltime

Critical Services Technician

The Critical Services Technician (CST) is responsible for all aspects of data ce...

Location

Denmark , Viborg

Salary:

Not provided

T5 Data Centers

Expiration Date

Until further notice

Requirements

Prior technical school training, preferred
1-3+ years’ experience in Mission Critical Environments, preferred
Electrical or mechanical licensure, preferred
Strong verbal and written communication skills
Good written technical proficiency to support the creation and revision of process documentation
Above average problem-solving and analysis skills
Able to function effectively and maintain focus in high-pressure situations
Has a “can-do” customer service attitude
Has high degree of attention to detail
Able to follow instructions and respond to management direction

Job Responsibility

Operate and maintain critical and non-critical data center infrastructure, equipment, and systems
Work with a team to deliver total availability (100% uptime)
Monitor power, cooling capacity, and environmental conditions within the data halls
Basic BMS & Scada Knowledge to navigate and monitor
Support the CRS by monitoring all system while the CSR are absent
Utilize a Computerized Maintenance Management System (CMMS)
Perform preventive maintenance on data center electrical and mechanical equipment
Participate in the development, review, audit, and execution of operating procedures
Resolve all electrical and mechanical issues within the Data Center
Respond to emergencies and critical issues

Fulltime

Distribution Technician Lead

Maintains a periodic inventory of supplies for Procedural Inventory Areas. Perfo...

Location

United States , Tucson

Salary:

Not provided

Tucson Medical Center

Expiration Date

Until further notice

Requirements

High school diploma or General Education Degree (GED)
or an equivalent combination of relevant education and experience
Four (4) years of warehouse stocking experience, preferably in an acute care setting
Knowledge of warehousing and inventory control best practices
Knowledge of storage and stock rotation of all supplies stored in the department
Skill in preparing orders and delivering supplies
Skill in organizing supplies for quick viewing and access
Skill in organizing work for efficiency while pulling and delivering supplies and collecting returns
Skill in basic computer applications and keyboarding, which will include maintaining EXCEL spreadsheets
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals

Job Responsibility

Maintains a periodic inventory of supplies for Procedural Inventory Areas
Performs advanced inventory management tasks including managing dated products to minimize cost to the department, communicates with Procedural Inventory Areas daily and adjusts ordering patterns to meet the needs of the area, and manages a constantly changing group of products caused by new technology, product back orders, and changes in clinical practice
Communicates daily with Procedural Inventory Area personnel on all supply related issues regarding availability of supplies to include back orders and acquire alternate items as directed, reports long lead time items and potential expiration of dated supplies
Recommends inventory levels that include considerations such as product usage, space allocation, lead time, reorder frequency and financial stewardship
Provides information and makes recommendation to designated Procedural Inventory Area staff regarding slow moving and nonmoving items
Partners with Supply Chain and Procedural Area leaders to identify and review consignment opportunities
Communicates consignment issues and concerns to the Customer Resource Specialist (CRS)
Serves as liaison for quarterly consignment audits
Assists vendors to ensure products to be exchanged are properly marked, staged and returned
Follows up with purchasing when expired consignment replacements are not replaced timely

Fulltime

New

Project Controls Coordinator III

Under the direction of the Supervisor Project Controls, the Analyst will perform...

Location

Canada , North York

Salary:

55.00 - 58.00 CAD / Hour

Randstad

Expiration Date

June 03, 2026

Requirements

Four Year Degree or combination of education and related experience
Minimum of 5 years of Project Controls or Project Management experience
Project Management professional designation is preferred
Experienced analytical skills including Earned Value Management
An independent worker within a team setting
Demonstrated professional engagement at a high level with work group, stakeholders, and contractors in a team setting
Proficient in the use of SAP, Oracle and MS office suite, intermediate+ Excel skills
Excellent communication, interpersonal, and organizational skills
Ability to effectively manage and prioritize workload, bring issues forward and develop working relationships at all levels of the organization
Detail oriented and understands the importance of data reconciliation

Job Responsibility

Analyze and maintain the project costs at the WBS level including control budget, incurred costs, commitments, and forecast
Provide the project team with accurate and timely cost information and reporting
Perform earned value measurements to anticipate forecast impacts
Perform monthly project close processes and prepare monthly project reports and comparative capital cost estimates for the project in Excel and EcoSys
Prepare and document project change orders timely in accordance with Project Management Office standards
Engage the Project Managers in meetings and discussions to review and reforecast project costs
Review cost transactions to ensure accurate project costs
Communicate with larger Controls team for the project
Liaise with Project Managers and Field Cost Analysts to ensure engagement with the project progress, changes, highlights and issues
Maintain the project Work Breakdown Structure such that it facilitates project execution and cost control during project execution and meets accounting requirements for asset creation and project closeout

Fulltime

New

Mechanical Engineer - Energy Solutions

Join a Team of engineers dedicated to working hand-in-hand with large manufactur...

Location

Canada , North York

Salary:

65.00 - 68.00 CAD / Hour

Randstad

Expiration Date

May 09, 2026

Requirements

Engineering Degree preferred, Chemical or Mechanical Engineering preferred
Membership in Professional Engineers of Ontario or similar professional organization is preferred
Proven skills in: leading and influencing without explicit authority
time management
Ability to work independently but work within team of like-minded professionals
Valid driver’s license with a responsible driving record is needed

Job Responsibility

Identify new contacts and conduct at large manufacturing facilities to for the purpose to arrange site visits
Attend joint-site visits with team members to support in the identification and quantification of potential energy savings projects
Balance multiple priorities: Able to effectively manage time and priorities, consistently delivering in firm annual savings targets
Quantify impact and secure buy-in: Build technical savings calculations, sometimes from scratch, to support project justification and persuade key stakeholders on execution of work
Provide solutions to complex problems: expertly analyze complex operations across various industries and synthesize available information to create solutions equally appealing to business and technical people
Forge long-term customer relationships: build and nurture professional relationships founded on unwavering trust and mutual respect, being a first-choice energy efficiency partner for your customers
Continuous growth and curious mindset: Proactively identify new savings opportunities to drive both short and long-term work and build a sales funnel for sustained growth
Drive results autonomously while thriving in a collaborative environment: Play a supporting role in managing a small group customer base and integrate into, and support broader Team to achieve personal and collective objectives

What we offer

Hybrid Work Model: in-Office (Monday, Tuesday & Thursday) Remote (Wednesday & Friday)

New

Senior Hardware Compliance Designer

Are you an experienced Electrical Engineer with a deep understanding of Electrom...

Location

Canada , North York, Ontario

Salary:

50.00 - 58.00 CAD / Hour

Randstad

Expiration Date

May 09, 2026

Requirements

Bachelor’s degree in Electrical Engineering or an equivalent combination of diplomas and work experience
6 to 10+ years of professional experience in hardware qualification or testing
Excellent knowledge of core EMC concepts, including Cabling, Grounding techniques, and Surge Protection
Demonstrated familiarity with railway (or similar industry) EMC and environmental standards
Proficiency in operating hardware test equipment and simulators used in the qualification process
Professional verbal and effective writing skills to ensure clear, concise, and unambiguous technical documentation and presentations
High degree of professionalism, strong ability to follow directions, use sound judgment, and keep meticulous track of all assigned tasks

Job Responsibility

Leading the hardware qualification, certification, and verification activities for new and revised products from planning through to customer acceptance
Conducting in-depth Electromagnetic Compatibility (EMC) tests on electronic devices according to industry standards (e.g., EN 61000 series, EN 50121 series, FCC, AREMA, MIL standards)
Performing environmental qualification tests (e.g., temperature, humidity, shock & vibration) on signaling electronic devices as per standards like EN 50125 and EN 50155
Participating in troubleshooting EMC-related issues and providing technical data and measurements to the design team
Preparing and driving comprehensive project documentation to customer acceptance, including the EMC Control Plan, EMC Compatibility Study, EMC Hazard Analysis, and EMC Test Report
Preparing hardware environmental qualification plans and reports, understanding the impact of requirements, and providing feedback on different technical approaches
Leading and managing subcontractors for specific on-site EMC measurements
Participating in ISA committee audits related to EMC and environmental requirements
Mentoring and developing junior team members within the department

What we offer

Impactful Work: Lead the qualification process for cutting-edge electronic devices used in safety-critical railway signaling systems
Technical Leadership: Be the in-house expert on EMC and environmental standards, influencing design and compliance strategies
Professional Development: Opportunities to develop junior team members and participate in high-level ISA committee audits
Global Exposure: Work with international standards and lead engagements with external subcontractors and customers for acceptance

Fulltime

New

Customs Compliance Specialist

Are you a trade compliance expert with a specialized background in the aviation ...

Location

Canada , Woodbridge, Ontario

Salary:

30.00 - 45.00 CAD / Hour

Randstad

Expiration Date

May 15, 2026

Requirements

Bachelor’s degree in Supply Chain, International Business, Aviation Management, or a related field (equivalent experience considered)
5+ years of dedicated customs/trade compliance experience, specifically within aerospace, aviation repair, or a high-tech regulated industry
Deep proficiency in EAR, HTS coding, and aviation-specific documentation (8130-3, EASA Form 1, teardown documentation)
Experience with NAV (Microsoft Dynamics) or similar ERP systems for tariff code management is preferred
A U.S. Customs Broker License, CCS, or specialized aviation compliance certification is a significant asset
Strong analytical ability, meticulous attention to detail, and the communication skills necessary to influence cross-functional teams in multiple countries

Job Responsibility

Ensure all aviation parts comply with U.S. Customs (CBP), EAR, FAA, and DOT regulations, as well as Canadian and UK (HMRC) requirements
Maintain expert-level accuracy for HTS codes, ECCN, country-of-origin, and valuation, specifically regarding airworthiness tags (8130-3/EASA Form 1)
Manage inbound consolidations and broker relationships (Expeditors/Freight Boy)
resolve PARs issues, and audit FedEx/broker invoices to minimize duty spend
Manage Item Card tariff codes in NAV
file and track duty recovery disputes
and perform gap analyses to identify process improvements
Serve as the primary point of contact for USCBP, BIS, and Census Bureau
lead internal and external compliance audits and maintain rigorous record-keeping

What we offer

6 month contract with the opportunity to become permanent
Hybrid work environment
Play a pivotal role in a highly regulated international supply chain, acting as a bridge between North American operations and UK-based parent company compliance
Opportunity to spearhead high-value projects, including the exploration of bonded warehouse setups and process automation within your first 120 days
Work within the Aerospace industry that values technical expertise and regulatory mastery

Fulltime

New

CNC Programmer - Laser Cutting and Forming

We are hiring for an experienced CNC Programmer – Laser Cutting & Forming. The s...

Location

Canada , St. Thomas

Salary:

26.55 - 39.83 CAD / Hour

Randstad

Expiration Date

May 25, 2026

Requirements

Post-secondary education in a relevant field of engineering
5 years of experience in CAD CAM programming
Experience with Laser machines, Press Brake machines, and CNC machining
Proficient in Fusion 360, Autocad, Solidworks, and Bisoft CAD software
Strong understanding of manufacturing processes and equipment
Excellent problem-solving and analytical skills
Ability to work in a fast-paced environment and meet deadlines
Strong communication and teamwork skills

Job Responsibility

Develop and optimize CNC laser cutting and forming programs for a range of materials including steel, aluminum and stainless steel
Utilize CAD/CAM software (AutoCAD, SolidWorks, Bysoft) to create and modify cutting plans for Bystronic laser cutting machines as well as bending plans for Bystronic forming equipment, and ensure efficient material usage
Analyze drawings and 3D models to create accurate and detailed programs for CNC cutting and forming operations
Set up and operate CNC laser cutting and forming machines, including loading material, adjusting settings, test runs and production runs (when necessary)
Monitor laser cutting and forming process to ensure parts meet specifications and quality standards
Maintain up-to-date knowledge of CNC laser cutting and forming technologies, machine capabilities and industry best practices
Responsible for preventative maintenance activities and troubleshooting/resolution of issues with lasers and forming equipment
Collaborate with planning, engineering and production teams to review project requirements and provide feedback on continuous improvement to increase productivity, material waste reduction and overall efficiency

What we offer

Competitive compensation $30-$40/hour
Opportunity to work with a dynamic team
Contract position to start with opportunity to extend or become permanent

Fulltime

Maintenance Technician (CRS)

Evonik Industries

Location:
Singapore , Tuas

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
February 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Maintenance Technician (CRS)