CrawlJobs Logo
Airswift Sweden Logo Airswift Sweden · Energy

Maintenance Engineering Specialist Instrumentation

Italy, Milan · Job Posted February 14, 2026
Apply Position
Job Link Share

Job Description

Perform all necessary Engineering Maintenance Instrumentation activities in MZLNG for conducting Maintenance efficiently and ensuring the technical integrity & required availability of equipment’s.

Job Responsibility

  • Ensure safety of personnel, environment protection, and the technical integrity of equipment’s in his domain of activities, implement HSE rules and follow procedures
  • Occasionally participate in the near misses analyses, HAZOPs, technical reviews, risk assessment, safety audits, RCA, incidents and accidents analyses
  • Review periodically the preventive Instrumentation maintenance plans and adjust frequencies and tasks
  • Supervise and ensure the coherence of the scheduling of all Instrumentation work requests
  • Prepare and update monthly reports on key performance indicators (preventive, corrective, performance, cost, budget follow up)
  • Provide necessary guidance and technical expertise to all Instrumentation maintenance operations to achieve maintenance of facilities at minimum cost
  • Review documentation, procedures, safety manual and other related documents
  • Produce new procedures as necessary, in line with Company Maintenance Policy
  • Validate and approve maintenance procedures, ensure procedures are implemented
  • Ensure quality control of execution during maintenance activities
  • Provide Plant Maintenance and Reliability teams with advice & guidance in solving technical problems
  • Ensure root cause analysis of failure is done where necessary, improve reliability and reduce the number of technical failures
  • Ensure that adequate provision is made for the availability of spare parts and materials for all maintenance works. This includes the periodic review of stock, the identification and ordering of direct materials and the preparation of financial justification
  • Coordinate contract site Instrumentation activities, ensure compliance with contract deliverables, quality, safety and performance
  • Coordinate development of technical work scope of contracts, review documents, and give recommendations for contractors pre-qualification
  • Supervise vendors for provision of specialist Instrumentation services, including participating in development of technical work scope of contracts
  • Initiate and implement Instrumentation modification proposals through Management of Change system

Requirements

  • Bachelor of higher education in Instrumentation or Electronic Engineering or equivalent with international standard and solid experience
  • Minimum 15 years specific maintenance experience in oil, gas or petrochemical industry
  • Minimum 7 years in LNG producing plants, not LNG terminals
  • Experience of working with equipment such as Centrifugal compressors control and anti-surge systems, Turbines control and protection, Natural gas processing control and instrumentation, Analytical instruments, DCS, PLC utilization requirements, Loading arms instruments, FGS maintenance practice
  • Excellent knowledge of Instrumentation equipment, systems integration and methods
  • Excellent knowledge of International Instrumentation safety systems standards (including ATEX / IECEx)
  • Excellent knowledge of international applicable codes & standards (IEC, IEEE, ANSI, API, EN, NEMA MG1 &2, ISO related to Instrumentation machinery and environment)
  • Good knowledge of maintenance SAP (like CMMS)
  • Good Knowledge of computer applications and methods
  • Excellent command of written and spoken English
Airswift Sweden - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Maintenance Engineering Specialist Instrumentation

8 matching positions

Sr Engineering Specialist

The Automations and Electrical Controls Engineer has responsibility for overall ...
Location
Location
United States , Aiken
Salary
Salary:
Not provided
owenscorning.com Logo
Owens Corning
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's Degree in Engineering
  • Five years of automation and control engineering experience in a manufacturing environment
  • Strong safety awareness, commitment and safety leadership
  • Experience working with 480 V
  • Experience leading projects (Capital, Focused Improvement)
  • Strong knowledge of PLC based controls, HMI applications, and programming (Siemens)
  • Availability to work nights, weekends, and holidays as required by operational support needs
Job Responsibility
Job Responsibility
  • Lead Safety for an injury free work environment
  • Educates team members on safe maintenance work processes and procedures
  • Adheres to, and continuously improves, all Plant and position-specific safety policies, procedures, and standards
  • Ensures a safe, clean and environmentally compliant work environment and builds a culture where safety is a first priority
  • Effectively communicates Owens Corning’s stand of safety with external parties and ensures that they work according to our safety standards
  • Good knowledge of NEC NFPA 70 and 70E, including Arc Flash
  • Developing Talent
  • Develops and executes training plans for maintenance personnel and creates a continuous learning environment for employees
  • Co-leads and coaches’ primary maintenance workforce and drives their engagement
  • Promotes a work environment characterized by mutual trust and respect, open and honest communications, teamwork and a passion for winning
  • Fulltime
Read More
Arrow Right

Electrical & Instrumentation Specialist

This is an exceptional opportunity to join our dynamic Maintenance team where yo...
Location
Location
United Kingdom , Billingham
Salary
Salary:
Not provided
cfindustries.com Logo
CF Industries
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Support the supervisor in setting the styles and standards for technicians to ensure all maintenance tasks are carried out in accordance with statutory, environmental, health and safety standards
  • Develop and revise isolation certificates for the electrical and HV isolations
  • Carry out job audits on technicians to ensure continued safe task execution by the technicians across the Billingham Complex
  • Deputises for the Maintenance Supervisor as and when required
  • Provides technical support to IE technicians for troubleshooting, advice and task quality control
  • Responsible for training of other IE Technicians to develop site specific standards/equipment competence
  • Responsible for the management & Mentoring of trade specific apprentices
  • Supports and advises supervisors during instrumentation and electrical fault-finding, maintenance, overhaul and commissioning of IE systems and components
  • Manage the safety of the high voltage (HV) distribution system and undertake routine maintenance and perform fault finding and repairs on all aspects of HV system equipment
  • Responds to, field plans and executes IE ‘P1’s’
What we offer
What we offer
  • bonus scheme
  • exceptional pension scheme contribution
  • life assurance
  • employee assistance programme
  • multiple high quality health care schemes
  • Fulltime
Read More
Arrow Right

Instrument Engineering Specialist

Advise and support Instrumentation/Fire & Gas (F&G) Engineering activities durin...
Location
Location
Qatar , Doha
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in engineering or equivalent
  • 8 years' experience in an oil and gas environment
  • Demonstrate good working knowledge of DCS, PLCs, ESD/F&G Systems, Anti Surge Control Systems, Metering Systems, and Turbine/Compressor Control Systems and full knowledge of SIL requirement
Job Responsibility
Job Responsibility
  • Provide a variety of Instrument/F&G engineering supports to contribute to the division strategy and goals which includes design reviews (eg, SIL workshops, assessment and verification, HAZOP, etc), commissioning, startup, failure analysis and advanced troubleshooting
  • Develop and implement surveillance and administration programs for critical Instrument and F&G Systems of new projects to achieve high standards of Reliability, Availability and Cyber Security
  • Define and document best practices within the area of expertise and recommend performance improvement initiatives
  • Develop plans and work schedules to ensure effective completion of tasks and activities, meeting the section and division KPIs
  • Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives
  • Control and supervise the activities undertaken by contractors, consultants and service providers
  • Guide less experienced engineers in implementing the company integrity and reliability systems
  • Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility
  • Maintain Issue Register identifying and resolving critical issues including new technology risks (under area of responsibility) which could impact new project Reliability, Availability and Cyber Security
  • Support high risk commissioning activities for high complexities & large-scale projects by undertaking stringent system surveillance, tuning and optimizing instruments and F&G systems, and providing advisory support to Operations and Maintenance
Read More
Arrow Right

Control Systems Specialist

Position Purpose: Functions as a subject matter expert for controls systems supp...
Location
Location
United States , West Nyack
Salary
Salary:
70000.00 - 85000.00 USD / Year
veolianorthamerica.com Logo
Veolia
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • B.S. degree in Engineering or related technical field or 5+ years of experience (as described below)
  • Experience with PLC/HMI systems required
  • Knowledge of widely used control system packages such as Rockwell, GE Proficy, GeoSCADA or similar required
  • Be available to support operations whenever needed (occasional nights and weekends)
  • Must be able to read and write
  • Ability to learn new water industry technology and teach
  • Must be able to walk on uneven terrain
  • climb ladders, hills and stairs
  • enter confined spaces to where SCADA equipment is located, moderate lifting up to 25 pounds
  • sit, stand and walk for long periods at a time
Job Responsibility
Job Responsibility
  • Responsible for ensuring the Utility SCADA standards are maintained and the control systems are in compliance with Veolia, Industry, State, and Federal cyber security rules, guidelines, policies, and best practices
  • Proactively evaluate, enhance, and develop preventative maintenance activities for instrumentation and control devices in the systems
  • Responsible for management of data acquisition originated from SCADA, or similar data source to ensure data quality and availability for the operation / business needs
  • Execute preventative maintenance and corrective maintenance activities
  • Key member of the Veolia New York Smart SCADA upgrade project team
  • Responsible for the operation and maintenance of the control systems hardware/software, communication networks, and historical database systems
  • Responsible to maintain control system Emergency coverage
  • Participate in the Veolia NY OPS Emergency Response Team
  • Troubleshoot systems
  • perform root cause analysis, identify resolution options, implement best alternatives
What we offer
What we offer
  • Paid time off policies
  • Health insurance
  • Dental insurance
  • Vision insurance
  • Life insurance
  • Savings accounts
  • Tuition reimbursement
  • Paid volunteering
  • Employer sponsored 401(k) plan
  • Fulltime
Read More
Arrow Right

Senior Specialist Metering

We are strengthening our metering capability in Stavanger and are looking for Se...
Location
Location
Norway , Stavanger
Salary
Salary:
Not provided
akersolutions.com Logo
Aker Solutions
Expiration Date
August 17, 2026
Flip Icon
Requirements
Requirements
  • Extensive experience within metering systems and instrument engineering
  • Strong understanding of relevant standards, regulations and industry best practices
  • Experience from offshore modification and maintenance projects
  • Ability to work independently and provide technical leadership
  • Strong collaboration and communication skills
  • Interest in digitalization, data utilization and continuous improvement
  • Ability to contribute across projects and disciplines in line with our cluster strategy
Job Responsibility
Job Responsibility
  • Serve as a key technical resource within fiscal, allocation and process metering
  • Support modification and maintenance projects for major energy clients
  • Contribute to maintaining and developing critical metering competence within the organization
  • Work closely with operations, projects, vendors and clients to ensure compliant and reliable metering solutions
  • Act as a mentor and expert within metering while contributing broadly across instrument engineering disciplines
  • Support digitalization, simplification and continuous improvement initiatives
  • Metering system design and modifications
  • Flow measurement and metering calculations
  • Metering philosophies and technical documentation
  • Metering system assessments and performance evaluations
What we offer
What we offer
  • Solid pension and insurance coverage
  • Well-being: access to free fitness facilities, sport groups and equipment rental, and a variety of cabins for rent
  • Remote work flexibility: work from home up to two days per week
  • Vibrant Young Professional network
  • Fulltime
Read More
Arrow Right
New

Reliability Specialist

HF Sinclair is seeking for a Reliablity Specialist to conduct assignments and du...
Location
Location
United States , Artesia
Salary
Salary:
Not provided
hfsinclair.com Logo
HF Sinclair
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A minimum of eight years of job-related experience is required
  • A minimum of a High School Diploma or GED equivalent is required
  • Knowledge of refinery operations and craft knowledge
  • Intermediate level leadership, interpersonal, and organizational skills
  • Ability to effectively communicate with others, both written and verbal communication
  • Basic reading and writing skills and the ability to perform basic level mathematical calculations
  • Proven interpersonal skills
  • Self-starter and safety sensitive
  • Troubleshooting skills and ability to function effectively in a team atmosphere
  • Knowledge of safe work practices
Job Responsibility
Job Responsibility
  • Uses technical concepts in their field to perform projects, and assignments for the Reliability department to support improving plant reliability supporting both operations and maintenance with direct supervision and exercises judgment in the independent evaluation, selection and substantial adaptation and modification of standard techniques, procedures, and criteria
  • Identifies and reviews defects and performances issues including those noted by Operations and ODR Rounds prior to work order generation
  • Identifies (through technical monitoring and failure analysis), troubleshoots and resolves discipline specific equipment reliability issues, including those that don’t require work orders, or provide more clear instructions on work requests that do require Maintenance
  • Acts as a discipline specialist and liaison between Engineering and Maintenance
  • Provides support for capital project design/installation
  • Visits maintenance and/or field to track status and quality of work on critical and bad actor equipment work orders
  • Maintains calibration/maintenance for all testing and inspection equipment used to ascertain integrity
  • Reviews and follows up on excursions reported through the critical equipment health monitoring systems
  • Escalates issues that cannot be resolved
  • Conducts audits of third party maintenance to ensure suitability for manufacture and/or repair of HFC equipment
What we offer
What we offer
  • Medical Insurance
  • Vision Insurance
  • Dental Insurance
  • Paid Time-Off
  • 401(k) Retirement Plan with match
  • Educational Reimbursement
  • Parental Bonding Time
  • Employee Discounts
  • Fulltime
Read More
Arrow Right

Control & Instrumentation (C&I) Engineer

As a Control & Instrumentation (C&I) Engineer at FCC Environment, you will be re...
Location
Location
United Kingdom , EnviRecover
Salary
Salary:
42249.00 - 63374.00 GBP / Year
webrecruit.co Logo
Webrecruit
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience working within a power station, process plant or similar industrial environment
  • Knowledge of Distributed Control Systems (DCS) and Continuous Emissions Monitoring Systems (CEMS)
  • Experience managing maintenance activities, contractors or small teams
  • Strong fault-finding and problem-solving skills
  • A recognised qualification in Control & Instrumentation or related engineering discipline
Job Responsibility
Job Responsibility
  • Ensuring all control and instrumentation systems are correctly operated, maintained, tested and calibrated in line with statutory requirements
  • Supporting planned maintenance outages and responding to unscheduled breakdowns
  • Managing maintenance, calibration and testing of specialist equipment, including DCS, CEMS and associated control systems
  • Supporting upgrades and new installation projects across the plant
  • Working closely with internal teams and external contractors to ensure efficient delivery of maintenance activities
  • Supporting compliance with all health, safety and environmental standards
What we offer
What we offer
  • Competitive salary
  • 33 days’ annual leave
  • Pension scheme
  • Life insurance
  • On-the-job training and progression
  • Recognition scheme
  • Refer a friend
  • Flexible benefits, including high street savings, cycle to work scheme and Gymflex membership, and much more (where applicable)
  • Access to an Employee Assistance Programme and the Best Doctors Service via our Wellbeing Platform
  • Fulltime
Read More
Arrow Right

Graduate Engineer

We are looking for talented engineers who are graduating, or are recently gradua...
Location
Location
United Kingdom , Great Yarmouth
Salary
Salary:
Not provided
risktec.tuv.com Logo
Risktec Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Civil engineering
  • Electrical and Electronic Engineering
  • C&I Control and Instrumentation
  • Mechanical Engineering
  • Chemical Engineering
  • Physics and Nuclear Physics
  • Other disciplines where modules have been covered in Nuclear Operations/Engineering will also be considered
  • clear interest in a career in the nuclear industry
  • have a drive to work and learn valuable engineering skills in a dynamic environment
  • local to the area or genuinely willing to relocate
Job Responsibility
Job Responsibility
  • Supporting the delivery of major construction-based safety cases
  • Providing specialist civil/structural input and advice to resolve construction problems
  • Facilitating hazard identification in cooperation with CDM regulations and optioneering workshops
  • Production of formal technical reports, safety cases and other project deliverables on time and to budget
  • Implementation of modifications to site
  • Supporting construction team and client during the construction process through problem solving
  • Supporting the build of safety case through justification of design
  • Reviewing design proposals and producing design substantiation reports
  • Authoring testing and commissioning strategies and functional test procedures
  • Support to plant operability including condition monitoring and identification of plant faults
  • Fulltime
Read More
Arrow Right