Maintenance Engineer (Mechanical Bias) Job at Baxter (Thetford)

Maintenance Engineer (Mechanical Bias)

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United Kingdom , Thetford

Salary:

55166.49 GBP / Year

Baxter

Expiration Date

Until further notice

Requirements

HNC or equivalent in Mechanical and/or Electrical engineering
High level Mechanical knowledge and overall engineering understanding in a highly regulated manufacturing environment
High degree of competency Welding &Machine Lathe & Milling
High level working knowledge of Gear box, pumps, pneumatic & hydraulic systems
Electrical knowledge of control panels, automation and robotics
Good level knowledge of electrical Safety, CCT and controllers
Work as part of a wider team but also show the ability to work independently

Job Responsibility

Carry out all planned and reactive maintenance on production equipment
Raise corrective and reactive maintenance dockets on Maximo
Assist and support queries to identify improvements to the stores system
Review planned and preventative maintenance procedures and suggest improvements
Advance issue's when necessary, in a timely manner
Identify areas for improvement across site
Deliver all activities at the standards required by GMP

What we offer

25 days annual leave + bank holidays
Employee discount scheme
Blue light card
Fantastic internal progression opportunities
Subsided canteen
Westfield healthcare
Up to 8% pension contribution
Employee assistance program
Training Offered: IPAF / Working at height, ABB robotics, Fanuc robotics, Staubli robotics, Lobo
Support for Parents

Fulltime

Maintenance Engineer (Mechanical Bias)

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United Kingdom , Thetford

Salary:

55166.49 GBP / Year

Baxter

Expiration Date

Until further notice

Requirements

HNC or equivalent in Mechanical and/or Electrical engineering
High level Mechanical knowledge and overall engineering understanding in a highly regulated manufacturing environment
High degree of competency Welding & Machine Lathe & Milling
High level working knowledge of Gear box, pumps, pneumatic & hydraulic systems
Electrical knowledge of control panels, automation and robotics
Good level knowledge of electrical Safety, CCT and controllers
Work as part of a wider team but also show the ability to work independently

Job Responsibility

Carry out all planned and reactive maintenance on production equipment
Raise corrective and reactive maintenance dockets on Maximo
Assist and support queries to identify improvements to the stores system
Review planned and preventative maintenance procedures and suggest improvements
Advance issue's when necessary, in a timely manner
Identify areas for improvement across site
Deliver all activities at the standards required by GMP

What we offer

25 days annual leave + bank holidays
Employee discount scheme
Blue light card
Fantastic internal progression opportunities
Subsided canteen
Westfield healthcare
Up to 8% pension contribution
Employee assistance program
Training Offered: IPAF / Working at height, ABB robotics, Fanuc robotics, Staubli robotics, Lobo
Support for Parents

Fulltime

Multi-skilled Engineer - Mechanical Bias

Mitie is offering an exciting opportunity for a skilled and experienced Multi Sk...

Location

United Kingdom , London

Salary:

Not provided

Mitie Cleaning & Hygiene Services

Expiration Date

Until further notice

Requirements

Experience within a Maintenance / Facilities Management environment
Relevant qualifications: C&G Level 3, NVQ Level 5, or HNC equivalent
C&G 2391 Electrical inspection and Testing (desired)
Strong understanding of Health & Safety, Permit to Work systems, and safe working practices
Comfortable working in confined spaces, at height, and performing manual tasks
Strong communication skills
Ability to use a mobile device for reporting
Flexibility for adjusted hours

Job Responsibility

Service, maintenance, and repair of a variety of mechanical installations
Maintenance of ventilation systems such as air handling units (AHUs) and intake/extract systems
Maintenance of heating and cooling systems including thermal wheels and fan coil units (FCUs)
Maintenance of water systems like booster sets, calorifiers, and water heaters
Perform preventative and reactive maintenance
Respond to client queries, report defects, and provide clear updates
Maintain accurate records of inspections, remedial work, and service documentation

What we offer

Virtual GP for you and household members
Financial wellbeing assistance through Salary Finance scheme
Access to flexible lifestyle benefits platform (Choices)
Option to purchase up to five extra days’ holiday
Option to buy critical illness insurance, dental treatment, or technology products
Access to high street discounts via MiDeals platform
Cycle-to-work scheme
Life cover of up to four times salary
Enhanced pension contributions
Save-as-you-earn scheme

Fulltime

Multiskilled Maintenance Engineer (Electrical Bias)

We are looking for a proactive, detail-oriented engineer with a strong electrica...

Location

United Kingdom , Rochester

Salary:

57000.00 - 58000.00 GBP / Year

Randstad

Expiration Date

August 25, 2026

Requirements

Proven track record as a Multi-Skilled Engineer within a manufacturing or production environment. PLC fault-finding and diagnostics experience is essential
Must have served an Electrical Apprenticeship (City & Guilds) or hold an HNC, ONC, NVQ Level 3, 18th Edition, or equivalent
Strong attention to detail, proactive approach to continuous improvement, excellent multitasking skills, and a minimum of B2 level in English
Prior experience utilizing Computerised Maintenance Management Systems (CMMS)

Job Responsibility

Asset Care & PPM: Execute systematic planned, preventative, and routine maintenance across a variety of site machinery to ensure optimum facility running
Breakdown & Diagnostics: Rapidly respond to faults using advanced PLC fault-finding and mechanical diagnostic techniques to minimize downtime
Continuous Improvement: Actively look for ways to reduce the cost impact of machine downtime and support the installation and commissioning of new equipment
Stock & Compliance: Manage critical spare parts inventory, order repair components, and ensure all tasks strictly adhere to health and safety regulations

What we offer

22.5 Shift Days Holiday (increases with length of service)
Auto-enrolment Pension Scheme
Paid Fortnightly for reliable income
Private GP Service
Eyecare Vouchers
Employee Assistance Programme (EAP)
Extensive Learning & Development platform
Study Sponsorship opportunities
Company Accommodation Available (if required)
Retail Discounts

Mobile Maintenance Engineer Electrical Bias

As a Foot Mobile Maintenance Engineer, you will be responsible for delivering bo...

Location

United Kingdom , London

Salary:

44000.00 - 46000.00 GBP / Year

paretofm

Expiration Date

Until further notice

Requirements

City & Guilds Level III (or equivalent) in Electrical discipline
City & Guilds Level III (or equivalent) in Mechanical discipline
18th Edition I.E.E
Strong understanding of Electricity at Work Regulations and safe working practices
Proven experience in maintenance, testing, and fault finding across building services systems

Job Responsibility

Carry out planned preventative maintenance (PPM) and reactive works on mechanical and electrical systems
Maintain plant, equipment, and associated components in good working order
Review and monitor subcontractor performance during specialist service visits and repair works
Complete simPRO instruction sets accurately, including photographic evidence for completed tasks
Maintain site logbooks and compliance records for electrical, mechanical, water systems, and health & safety
Escalate any issues relating to statutory planned maintenance to the Supervisor or Management team
Maintain comfortable environmental conditions through effective operation of HVAC systems
Respond to plant and equipment failures, carrying out fault finding on mechanical and electrical systems
Respond to BMS alarms and use the system for first-line diagnostics
Identify and report potential hazards or safety concerns promptly

Fulltime

Foot Mobile Maintenance Engineer Electrical Bias

As a Foot Mobile Maintenance Engineer, you will be responsible for delivering bo...

Location

United Kingdom , London

Salary:

44000.00 - 46000.00 GBP / Year

paretofm

Expiration Date

Until further notice

Requirements

City & Guilds Level III (or equivalent) in Electrical discipline
City & Guilds Level III (or equivalent) in Mechanical discipline
18th Edition I.E.E
Strong understanding of Electricity at Work Regulations and safe working practices
Proven experience in maintenance, testing, and fault finding across building services systems

Job Responsibility

Carry out planned preventative maintenance (PPM) and reactive works on mechanical and electrical systems
Maintain plant, equipment, and associated components in good working order
Review and monitor subcontractor performance during specialist service visits and repair works
Complete simPRO instruction sets accurately, including photographic evidence for completed tasks
Maintain site logbooks and compliance records for electrical, mechanical, water systems, and health & safety
Escalate any issues relating to statutory planned maintenance to the Supervisor or Management team
Maintain comfortable environmental conditions through effective operation of HVAC systems
Respond to plant and equipment failures, carrying out fault finding on mechanical and electrical systems
Respond to BMS alarms and use the system for first-line diagnostics
Identify and report potential hazards or safety concerns promptly

Fulltime

Multi-skilled Maintenance Engineer (Mech Bias)

This is a great opportunity for a multi-skilled Maintenance Engineer (mechanical...

Location

United Kingdom , Coventry

Salary:

37500.00 - 42500.00 GBP / Year

NP Aerospace Limited

Expiration Date

Until further notice

Requirements

Time served multi skilled maintenance engineer (mechanically bias)
Relevant experience in a fast-paced preventative maintenance environment
Electrical understanding (BS 7671)
Understanding of hydraulic, pneumatic systems and compression moulding
Ability to fault find on electrical and mechanical systems.
Good IT experience with Microsoft Packages such as Word and Excel

Job Responsibility

Service and maintain all plant, equipment and building services in line with the company’s preventative maintenance standards and procedures.
Support the sites EHS compliance obligations
Machine tool changes and modifications
New equipment installation and modification
Safety system installations and improvements
Movement or re-organisation of production lines
Installation of services to support the sites development.
Assist with implementation of changes to manufacturing processes.
Any other activities requiring practical engineering support in their implementation.
Produce work instructions for specific job tasks.

What we offer

Discretionary Half Year Bonuses
Holidays – 25 days + 8 Bank Holidays + Holiday Purchase Scheme
Two weeks paid leave for Reservists and Cadets to attend yearly training/camp
Paid leave for employees who are Cadet Force Adult Volunteers (CFAVs)
Pension – ER/EE – 4%/5% = 9% combined
Life Cover – 3 x base salary
BHSF Cash Healthcare Plan
Shift Premium (£4,000)
Discretionary Bonus

Fulltime

Multi Skilled Shift Engineer - Electrical Engineer Bias

We are looking for an experienced Shift Electrical Bias to work with a range of ...

Location

United Kingdom , Coleshill, Birmingham

Salary:

Not provided

Mitie Cleaning & Hygiene Services

Expiration Date

Until further notice

Requirements

Qualified to BS 7671 (18th Edition) in Electrical Installations
Strong understanding of electrical systems, plant, and controls
Ability to read and follow technical drawings and procedures
Self-motivated, well-organised, and eager to learn
Respectful, professional, and confident in raising safety concerns

Job Responsibility

Complete electrical installations and assist tradespeople with wiring, calibration, and alignment tasks
Carry out testing, fault diagnosis, repairs, and updates to maintenance work orders
Use appropriate test equipment and tools, understanding their limitations
Follow lockout/tagout procedures—no live working permitted
Maintain high standards of housekeeping and attend toolbox talks
Carry out modifications and installations when required
Maintain, repair, and calibrate electrical, mechanical and instrumentation plant to optimize both reliability and maintainability
Provide a service that ensures all key performance indicators are met
Liaise with contractors or external suppliers where required
Complete any required paperwork

What we offer

Virtual GP for you and household members
Financial wellbeing assistance through Salary Finance scheme (access 50% of earned pay before payday)
Flexible lifestyle benefits platform (Choices) to purchase extra holiday, critical illness insurance, dental treatment, technology
High street discounts through MiDeals platform
Cycle-to-work scheme
Life cover of up to four times salary
Enhanced pension contributions
Save-as-you-earn scheme
Mitie Matching Share Plan
Mitie Stars recognition with cash prizes

Fulltime

Select Country

Maintenance Engineer (Mechanical Bias)

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Maintenance Engineer (Mechanical Bias)

Maintenance Engineer (Mechanical Bias)

Maintenance Engineer (Mechanical Bias)

Multi-skilled Engineer - Mechanical Bias

Multiskilled Maintenance Engineer (Electrical Bias)

Mobile Maintenance Engineer Electrical Bias

Foot Mobile Maintenance Engineer Electrical Bias

Multi-skilled Maintenance Engineer (Mech Bias)

Multi Skilled Shift Engineer - Electrical Engineer Bias

Our AI answers in your language