CrawlJobs Logo
Ajinomoto Foods North America, Inc. Logo Ajinomoto Foods North America, Inc. · Manufacturing

Maintenance Assembler

United States, Oakland · Job Posted February 14, 2026
Apply Position
Job Link Share

Job Description

This position is responsible for maintaining plant’s food manufacturing equipment and facility utilities, troubleshooting faulty devices/systems as well as performing regularly scheduled maintenance on all processing and packaging equipment. The position requires proficiency and thorough understanding of various machine systems including but not limited to, mechanical systems, electrical and high voltage systems, PLC and controls systems, hydraulic and pneumatic systems, welding and fabrication of equipment in a food manufacturing plant.

Job Responsibility

  • Maintains, troubleshoots and repairs various production equipment systems and devices and performs regular preventive maintenance as planned
  • Performs regular equipment checks and completes the required predictive checklists to identify early signs of potential equipment failures
  • Performs new installations and relocations of new/existing equipment, regular and emergency startups and shutdowns of equipment
  • Assist Team Leaders and line Operators in efficient line start up and equipment adjustments
  • Assist other maintenance department staff with technical troubleshooting
  • Keeps supervisor and/or manager up to date on all on-going work assignments
  • Performs high quality work that meets industry accepted maintenance practices
  • Continues to develop maintenance technical skills
  • Increases equipment specific knowledge for maintenance activities on factory equipment
  • Learns and demonstrates our AFNA One Team culture
  • Participates within our TPM (total performance management) journey through small group activities and continuous improvement methodology
  • Perform building and grounds maintenance and facility repairs as needed
  • Maintains a neat and clean work area
  • Adhere to all company policies and procedures
  • Work safely and promote a safe work environment
  • Perform other duties as assigned

Requirements

  • 1-3 years of proven work experience on electrical/electronic systems, mechanical systems, hydraulic and pneumatic systems
  • Functional knowledge of standard manufacturing practices including general safety, lock-out tag-out, forklift safety, ARC Flash and electrostatic discharge awareness
  • Electrical skills in troubleshooting and repairing 480/230 v 3ph.120 v and 24v systems with the ability to read and understand schematics, blue prints and PLC ladder logic
  • Must be able to work well with all levels of personnel whether individually or in a team environment
  • Must possess a high level of written and verbal communication skills, critical thinking and problem solving skills
  • Must have working knowledge of testing equipment and devices including the use of Multi-meter, Thermal imaging camera, and basic hand and power tools
  • Experience and ability to work in a fast-paced manufacturing environment
  • Basic computer skills is required (Microsoft windows, MS Office Suite and outlook email)

Nice to have

  • Welding and fabrication experience
  • Foods manufacturing experience
  • Industrial ammonia refrigeration system knowledge and/or certification
  • Industrial boiler system knowledge and/or certification
Ajinomoto Foods North America, Inc. - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Maintenance Assembler

8 matching positions

Maintenance Assembler

Position Summary: Responsible for the safe and timely disassembling or reassembl...
Location
Location
United States , Lampasas
Salary
Salary:
Not provided
ajinomotofoods.com Logo
Ajinomoto Foods North America, Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or equivalent
  • Minimum of 1 year manufacturing experience
  • Ability to manage multiple priorities, utilizing basic math skills and auditing paperwork
  • Must have basic mechanical knowledge
  • Understand the basic knowledge of computers
  • Ability to effectively adapt to change
  • Ability to read, write, and speak English
Job Responsibility
Job Responsibility
  • Responsible for the safe and timely disassembling or reassembling of production equipment, ensuring that all equipment is intact (i.e: 'o' rings, gaskets, nuts & bolts) for production operation
  • Adequate housekeeping at all times during shift, creating an organized layout for all personnel
  • Disassemble all equipment in a timely manner to prepare for sanitation
  • Re-assemble all equipment with minimal supervision or assistance
  • Detect any abnormal conditions (.ie: 'o'rings, worn equipment, bearings or any bad moving parts and ability to perform preventive maintenance
  • Make minor repairs on equipment on an as-needed basis
  • Have all equipment re-assembled and ready for production start-up
  • Perform other duties as directed by the lead
  • Fulltime
Read More
Arrow Right

Maintenance Assembler

Position Summary: Responsible for the safe and timely disassembling or reassembl...
Location
Location
United States , Lampasas
Salary
Salary:
Not provided
ajinomotofoods.com Logo
Ajinomoto Foods North America, Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or equivalent
  • Minimum of 1 year manufacturing experience
  • Ability to manage multiple priorities, utilizing basic math skills and auditing paperwork
  • Must have basic mechanical knowledge
  • Understand the basic knowledge of computers
  • Ability to effectively adapt to change
  • Ability to read, write, and speak English
Job Responsibility
Job Responsibility
  • Responsible for the safe and timely disassembling or reassembling of production equipment, ensuring that all equipment is intact (i.e: “o” rings, gaskets, nuts & bolts) for production operation
  • Adequate housekeeping at all times during shift, creating an organized layout for all personnel
  • Disassemble all equipment in a timely manner to prepare for sanitation
  • Re-assemble all equipment with minimal supervision or assistance
  • Detect any abnormal conditions (.ie: “o”rings, worn equipment, bearings or any bad moving parts and ability to perform preventive maintenance
  • Make minor repairs on equipment on an as-needed basis
  • Have all equipment re-assembled and ready for production start-up
  • Perform other duties as directed by the lead
  • Fulltime
Read More
Arrow Right

Aircraft Mechanic II (UH-60)

The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range o...
Location
Location
Kuwait , Kuwait City
Salary
Salary:
Not provided
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or Equivalent is required
  • With a valid (FAA) A&P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required
  • All experience must be within the Five (5) most recent years
  • Without a valid (FAA) A&P certificate
  • Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required
  • All experience must be within the Six (6) most recent years
  • A Valid US Passport is Required for deployment to Kuwait
  • Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment
  • Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment
  • Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance
Job Responsibility
Job Responsibility
  • Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components
  • Safely prepare aircraft for inspections and maintenance checks and services
  • Perform scheduled inspections and assist in performing special inspections
  • Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required
  • Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives
  • Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components
  • Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation
  • Participate in maintenance test flights and operation checks as required
  • Perform other duties as requested
What we offer
What we offer
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance
  • Fulltime
Read More
Arrow Right

Aircraft Mechanic I

The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landin...
Location
Location
United States , Groton
Salary
Salary:
37.83 USD / Hour
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Valid up-to-date A&P license. If no A&P license, shall have Three (3) years aviation maintenance experience. All experience must be within the Six (6) most recent years. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for a facility credentials/authorization at the work location. Tools are Required
  • must possess own shadowed/etched Tools and Toolbox.
Job Responsibility
Job Responsibility
  • Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems
  • Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills
  • Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
  • Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments
  • Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction
  • Replaces or repairs worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment
  • Removes engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft
  • Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes
  • Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair.
What we offer
What we offer
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance
  • Fulltime
Read More
Arrow Right

Maintenance Mechanic Lead - 2nd Shift

This position is responsible for leading and organizing a team of maintenance te...
Location
Location
United States , Oakland
Salary
Salary:
Not provided
ajinomotofoods.com Logo
Ajinomoto Foods North America, Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate Degree or other technical degree in Electrical Engineering, Mechanical Engineering or Technology or the equivalent combination of education and experience
  • 3-5 years of proven work experience on electrical/electronic systems, mechanical systems, hydraulic and pneumatic systems is required with the ability to demonstrate high proficiency in these areas
  • Effectiveness in prioritizing assigned duties and evaluating the work of personnel
  • Outstanding skills for offering training and leadership to staff for them to be able to successfully carry out diverse duties associated with the building trades
  • Ability to interpret, illustrate, and apply regulation codes and rules
  • Outstanding ability to interpret sketches, blueprints, and work orders to other personnel
  • Functional knowledge of standard manufacturing practices including, but not limited to: general safety, lock-out tag-out, forklift safety, ARC Flash and electrostatic discharge awareness
  • Electrical skills in troubleshooting and repairing 480/230 v 3ph.120 v and 24v systems with the ability to read and understand schematics, blue prints and PLC ladder logic
  • Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators in order to assist with repairs and troubleshooting
  • Must possess a high level of written and verbal communication skills, critical thinking and problem solving skills
Job Responsibility
Job Responsibility
  • Instructs and offers guidance and directives to a team of maintenance technicians while being involved in one or more of the skilled activities
  • Gives support to supervisor and/or manager in regards to accomplishing tasks while referring uncommon technical issues to the supervisor
  • Offers inputs into maintenance technician performance evaluations since the lead role oversees the duties of assigned maintenance technicians
  • Designates and monitors the work of maintenance personnel in order to complete scheduled/planned work activities while keeping mechanical downtime to a minimum level to achieve department's commitments and targets
  • Guarantees adherence to safety practices and principles, and to the relevant Federal, State, and Local codes and promotes a safe work environment
  • Ensures the maintenance of equipment, tools and other belongings in a clean, secure, and appropriate working condition and for the maintenance shop to be neat and clean
  • Maintains, troubleshoots and repairs various production equipment systems and devices and performs building and grounds maintenance and facility repairs as needed to include carpentry, plumbing, and painting
  • Performs regular equipment checks and completes the required predictive checklists to identify early signs of potential equipment failures and minimize unplanned downtime, and identify opportunities for improvement
  • Performs new installations and relocations of new/existing equipment, regular and emergency startups and shutdowns of equipment in accordance with company standard operating procedures and safety requirements
  • Performs high quality work that meets Industry accepted maintenance practices to maintain compliance with external regulatory agencies
  • Fulltime
Read More
Arrow Right
New

Manual Designer

Create Spare Parts Manuals, Exploded Views, Assembly Drawings and Parts Lists fo...
Location
Location
India , Pune
Salary
Salary:
Not provided
https://www.randstad.com Logo
Randstad
Expiration Date
August 16, 2026
Flip Icon
Requirements
Requirements
  • Create Spare Parts Manuals, Exploded Views, Assembly Drawings and Parts Lists for concrete pumps, boom pumps, stationary boom placers and accessories
  • Develop Operation & Maintenance Manuals (O&M) including machine overview & specifications, operating instructions, safety guidelines & warnings, preventive maintenance schedules, lubrication charts, troubleshooting guides etc.
  • Create and manage 3D assemblies in Solid Edge
  • Generate clear exploded views optimized for manuals and service understanding
  • Create 2D illustrations, callouts and annotations suitable for print and digital manuals
  • Coordinate with design team to ensure documentation models match released production designs
  • Prepare Installation, Erection, and Commissioning Manuals where applicable
  • Ensure manuals comply with industry best practices, customer expectations, and safety standards
Job Responsibility
Job Responsibility
  • Create Spare Parts Manuals, Exploded Views, Assembly Drawings and Parts Lists for concrete pumps, boom pumps, stationary boom placers and accessories
  • Develop Operation & Maintenance Manuals (O&M) including machine overview & specifications, operating instructions, safety guidelines & warnings, preventive maintenance schedules, lubrication charts, troubleshooting guides etc.
  • Create and manage 3D assemblies in Solid Edge
  • Generate clear exploded views optimized for manuals and service understanding
  • Create 2D illustrations, callouts and annotations suitable for print and digital manuals
  • Coordinate with design team to ensure documentation models match released production designs
  • Prepare Installation, Erection, and Commissioning Manuals where applicable
  • Ensure manuals comply with industry best practices, customer expectations, and safety standards
Read More
Arrow Right

Hotel Electrician

Expected to repair, maintain, install and monitor Hotel Electrical Equipment and...
Location
Location
Zimbabwe , Harare
Salary
Salary:
Not provided
about.hyatt.com Logo
Hyatt
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum 5 O level subjects including Mathematics and English
  • Class 1 Electrician Certificate from a recognized college
  • A Higher National Diploma in Electrical Power Engineering is an added advantage
  • Full Apprenticeship training is an added advantage
  • Profound knowledge of local electrical standards and IEE regulations
  • Minimum 3 years experience post training
  • Having experience in a similar position and industry is an added advantage
  • Computer literacy is a must as you shall be required to use computerised maintenance programs
Job Responsibility
Job Responsibility
  • Keep all Hotel Electrical equipment in good state of repair with minimum downtime by providing day-to-day maintenance
  • Complete maintenance work orders from all departments on a timely basis by following hotels standard operating procedures
  • Continually work towards and support the improvement of engineering service to guests, other departments and fellow staff
  • Be prepared to work night shift
  • Produce and maintain sound electrical connections to minimize the probability of failure and maximize usability of electricity in all facilities
  • Assemble and install electrical wiring, fixtures, and equipment
  • Get a good understanding of other services apart from those within your trade
  • Promptly update the job card system once work is completed
  • Ability to interpret readings from meters & gauges and other measuring units
  • To be available for any emergencies and act in an engineering capacity to protect guests and associates and preserve the building and its systems during the emergency
  • Fulltime
Read More
Arrow Right

Millwright - Maintenance Technician

At Sierra Pacific Industries, we understand our greatest strength is the people ...
Location
Location
United States , Quincy
Salary
Salary:
32.16 - 38.80 USD / Hour
spi-ind.com Logo
Sierra Pacific Industries
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 2 years recent verifiable related work history or equivalent education
  • Proficient in welding, cutting, and using hand tools for repairs
  • Working knowledge of hydraulics, pumps, motors, gearboxes, conveyors, and bearings
  • Ability to recognize, report, and repair mechanical defects
Job Responsibility
Job Responsibility
  • Maintain and repair all mechanical parts and machinery in a manufacturing facility
  • Troubleshoot, install, replace, and repair machines and equipment including mechanical, pneumatic, and hydraulic systems
  • Dismantle machinery and equipment, locate cause of malfunctioning or mechanical breakdown, replace parts from stock or fabricate replacement parts as needed
  • Fabricate machine components for repairs and improvements of mechanical devices
  • Effectively conduct and assess diagnostic tests to ensure optimum system functionality
  • Assemble, install, and proactively maintain mechanical systems, machinery, and equipment for efficient operation
  • Operate arc welder, cutting torch, hand tools, forklift, and welding truck
  • Fabricate, weld, mill, and lathe as needed
  • Perform general maintenance in a safe and efficient manner and maintain a clean work area
  • Work may consist of various shifts and overtime including weekends and holidays during busy production times
What we offer
What we offer
  • Up to $1,500 hiring bonus
  • Excellent low-cost health benefits
  • Retirement plan with employer-paid contributions
  • Paid vacation and 10 holidays
  • Full Health Benefits Plan (including medical, dental, and vision) with low-cost premiums
  • 401(k) with Company Match
  • Additional Retirement Contributions
  • company-paid Life Insurance
  • Fulltime
Read More
Arrow Right