Machine Setup Technician Job at WFA Staffing Group (Pewaukee)

Production Technician I, Fill/Pouch

The Fill/Pouch Production Technician I contributes to Baxter's mission of saving...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years of age
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Must have basic computer skills
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
Frequent grasping, pushing/pulling and reaching with hands and arms

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up, load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Execute Batch/Code changes, tank changes, as well as sub lots as required
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement.

Fulltime

Production Technician - Fill

The Fill Production Technician I is a Salaried Non-Exempt position which contrib...

Location

United States , Marion

Salary:

26400.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED and must be at least 18 years of age
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
Basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Ability to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Basic computer skills

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Execute Batch/Code changes, tank changes, as well as sub lots as required
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Parttime

Production Technician I

The Fill/Pouch Production Technician I contributes to saving and sustaining live...

Location

United States , Marion

Salary:

41305.58 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years of age
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Must have basic computer skills
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
This position requires frequent grasping, pushing/pulling and reaching with hands and arms

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up, load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Execute Batch/Code changes, tank changes, as well as sub lots as required
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement.

Parttime

Machine Setup Technician

We are seeking experienced Machine Setup Technicians to join our team in Pewauke...

Location

United States , Pewaukee

Salary:

24.00 - 30.00 USD / Hour

WFA Staffing Group

Expiration Date

Until further notice

Requirements

Previous CNC setup experience on mills or lathes required
Ability to read blueprints and use measuring instruments (calipers, micrometers, gauges)
Strong mechanical aptitude and troubleshooting skills
Ability to work independently and in a fast-paced manufacturing environment
Reliable attendance and strong attention to detail

Job Responsibility

Set up CNC mills or lathes according to production specifications
Install tooling, fixtures, and machine components as required
Adjust machine offsets and settings to maintain part quality
Perform first-piece inspections to verify accuracy and compliance with specifications
Monitor machines during operation and make necessary adjustments
Read and interpret blueprints, work orders, and setup sheets
Maintain a clean and safe work environment
Work with team members and supervisors to meet production goals

Fulltime

Tool Room Technician

Operate and setup tool room machinery in accordance to AAM guidelines. Read and ...

Location

United States , Fort Wayne

Salary:

Not provided

American Axle & Manufacturing

Expiration Date

Until further notice

Requirements

Minimum 1 to 3 years work experience in setting up and the operation of CNC lathes and mills
Ability to complete mathematical computations
Ability to read and edit CNC Programs
Experience using measurement equipment (Calipers, micrometers, indicators)
Ability to read and interpret engineering drawings and blueprints
Demonstrate the ability to troubleshoot and have good problem-solving skills
GED or High school diploma Required

Job Responsibility

Operate and setup tool room machinery in accordance to AAM guidelines
Read and interprets blueprints and diagrams as required for machine settings and adjustments
Replace tooling as required
Verify accuracy of machined parts after machine setup to ensure machine is ready for production
Capable of setups through complete processing of advanced forge press tooling components using CNC Turning centers, CNC Milling Machines, Manual Lathes, Manual Surface grinders, CMM
Recognize tool paths by interpreting the program (G and M codes)
Troubleshoot daily problems through root cause analysis techniques as they occur
Coordinate & implement engineering changes
Participate in continuous improvement processes
Implements safety and good housekeeping standards

What we offer

Physical Well-Being: Annual physicals, Preventative Screenings and Immunizations, Diabetes and Hypertension Prevention and Management, Tobacco Coaching, Fertility Benefits
Emotional Well-Being: Employee Assistance Program (EAP), Behavioral Health Network (in-person, virtual/digital), Stress Management and Mediation Programs, Parental Leave Policy
Financial Well-Being: Retirement Readiness, Debt Management, Financial Education and Planning, Lifestyle Account
Social Well-Being: Associate Appreciation Events, Lunch with Leaders

Product Repair/Modification Technician

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Titusville, Florida

Salary:

82450.00 - 111550.00 USD / Year

Boeing

Expiration Date

April 06, 2026

Requirements

Ability to pass an annual propellant and Self Contained Atomospheric Protective Ensemble (SCAPE) physical and training for both category I and IV SCAPE operations
10+ years of experience setting up and operating Manual and CNC machines
10+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators
10+ years of experience with Microsoft Office including Outlook, Excel, Word, PowerPoint, SharePoint, and Teams
10+ years of experience working with powered hand tools
Experience with reading and interpreting drawings, specifications, material processes, schematic and diagrams
Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift
This position requires an active U.S. Top Secret/SCI Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
This position requires the ability to obtain access to a National Aeronautics and Space Administration (NASA) facility.
This is a NASA safety-sensitive position and is subject to random drug and alcohol testing.

Job Responsibility

Lay out, set up, and operate lathes and milling machines utilizing manual MDI controllers, 3RD party numerically controlled programs or conventional methods using various engineering data sources ie CATIA, UG¬NX, Model Base Definition (MBD)
Load machine control media or information from Numerical Control (N/C) or Manual Data Input, (MDI) data sheets, check and make required control settings, align spindle to setup points, and place machine in automatic cycle when required
Perform, prove, on Numerical Control (N/C) media and first run parts involving exacting tolerances. Perform MDI, N/C, and conventional machining holding exacting machine operation tolerances when machining compound angles using special holding fixtures
Mill multiple angles using indexing head, straight and single angle boring, drilling, squaring, serrating, slotting, elongating holes, cutting key warp, rough cutting, counter boring, drilling reaming, tapping of single or equally spaced holes on given diameter using rotary table or dividing head, straddle, gang milling, spline, keyway cutting, face, radii milling, profiling and detail tools to exacting tolerance
Cut straight or tapered single lead thread by use of single point cutting tool.
Machine single angles and radii to exacting tolerances, operate and set-up jig bore machines
Set up parts on surface plates and/or Computerized Measuring Machine (CMM) Machine using gauge blocks, parallels, clamps and "V' blocks to place part in desirable position for taking readings with precision measuring instruments
Check machine setup and approve first correct part prior to production run
Set up optical comparator, and similar equipment. Inspect work for acceptable quality, completeness, proper function, and adherence to engineering specifications. Check for presence and completeness of required records and data sheets
Make precision measurements to assure all GD&T requirements are met. Inspect tooling details, fixtures and shop fabricated machine tools for dimensions, workmanship, adherence to tool design, engineering prints, shop practice and procedure, and inspection standards

What we offer

competitive base pay and variable compensation opportunities
health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
paid and unpaid time away from work
generous company match to your 401(k)
industry-leading tuition assistance program pays your institution directly
fertility, adoption, and surrogacy benefits

Fulltime

Production Maintenance Technician

Maintenance Technician conducts proactive machine maintenance, shared machine se...

Location

United States , Bolingbrook

Salary:

Not provided

Amsive

Expiration Date

Until further notice

Requirements

Maintenance experience in mailing, packing machines/production machines
Technical knowledge of high-speed production equipment, mechanical/electrical equipment
Good verbal and written communication skills
Must be available to work overtime as business needs require
Strong conflict / issue resolution skills with a strong aptitude for decision-making
English fluency in reading, writing, and speaking required
Bilingual Spanish in reading, writing and speaking preferred
Proficient with internet research, MS Office - Outlook, Word, and Excel
Ability to operate a PC

Job Responsibility

Conducts proactive machine maintenance, shared machine setup, troubleshooting, repairs and preventive maintenance service
Provides proactive support in maintaining production equipment
Works in a team-oriented environment to achieve productivity goals
Performs emergency/unscheduled repairs of production equipment during production
Performs scheduled maintenance repairs of production equipment during machine service
Shares set up responsibilities with operators for scheduled production runs
Requires mechanical skills including mechanical, electrical, pneumatic and hydraulic troubleshooting and repair production machines
Must become knowledgeable with operating system computers on each production machine
Support all production needs as necessary including operating equipment, relieving breaks and lunches and leading and assisting on line changeovers
Reads and interprets equipment manuals, Job tickets and work orders to perform required jobs /maintenance and service

Fulltime

Machine Technician

Join Our Dynamic Onsite Engineering & Facilities Team at IPL Sittingbourne! We a...

Location

United Kingdom , Sittingbourne

Salary:

13.92 GBP / Hour

IPL

Expiration Date

May 19, 2026

Requirements

FMCG experience in a production/operational environment
Excellent practical skills with strong mechanical aptitude
Educated to GCSE level A, B, or C (or equivalent) in Maths and English
Strong analytical and IT skills, including Word, Excel, and PowerPoint
Excellent communication skills, able to liaise comfortably with all levels within the company
Ability to work quickly and methodically within a team environment
Initiative-driven and results-oriented
Flexible to meet and deliver business needs
High attention to detail
Relevant Health & Safety qualification (IOSH) is desirable

Job Responsibility

Adhere to Standard Operating Procedures in a clean, safe environment
Monitor work areas to ensure safety and maintain machinery cleanliness
Complete daily machine safety checks as per SOPs
Lead autonomous maintenance of equipment, ensuring on and off-line activities are completed
Communicate machine safety issues to the Engineering Team, Line Leaders, and direct reports
Monitor yield to optimise value for IPL
Perform product changeovers safely and efficiently, minimising downtime and identifying improvements
Liaise clearly with Line Leaders to ensure timely machine setups and prompt changeovers
Report machine run rate issues affecting safety or productivity to the Line Leader and Engineer immediately
Conduct mandatory safety and food safety checks

What we offer

15% Asda In-store Discount
Paid Annual Leave Allowance
Enhanced pension scheme
Life Assurance - 4 x annual base salary
Help@hand - Free health and wellbeing support service
Grocery Aid - emotional, practical, and financial support
Electric Vehicle Scheme
Asda Mobile Discount - 30% off
Discounted health assessments
Asda Pet Insurance discount – Up to 10% Discount

Fulltime

Machine Setup Technician

WFA Staffing Group

Location:
United States , Pewaukee

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
December 13, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Machine Setup Technician

Production Technician I, Fill/Pouch

Production Technician - Fill

Production Technician I

Machine Setup Technician

Tool Room Technician

Product Repair/Modification Technician

Production Maintenance Technician

Machine Technician

Machine Setup Technician

WFA Staffing Group

Location:United States , Pewaukee

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:December 13, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Machine Setup Technician

Production Technician I, Fill/Pouch

Production Technician - Fill

Production Technician I

Machine Setup Technician

Tool Room Technician

Product Repair/Modification Technician

Production Maintenance Technician

Machine Technician

Location:
United States , Pewaukee

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
December 13, 2025