CrawlJobs Logo

Machine Operator

hunterdouglas.com Logo

Hunter Douglas

Location Icon

Location:
United States , Augusta

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

15.00 USD / Hour
Save Job
Save Icon
Apply Position

Job Description:

The Machine Operator will be responsible for trimming excess lining and fabric from the sides and bottom of drapery panels using either a flat table or a vertical table.

Job Responsibility:

  • Remove drapery from the rack and clamp fabric to the rod pocket table
  • Check hem and finished length on the work ticket
  • Inspect fabric for flaws or defects
  • Cut fabric and trim off extra lining
  • Make hidden tabs using an iron and serge sewing machine
  • Clamp fabric to the vertical tabling machine
  • Enter hem and finished length from the work ticket on the control box
  • Raise the machine to the finished length
  • Inspect fabric for flaws or defects
  • Machine will cut the fabric
  • Cut and trim off extra lining
  • Comply with all facility safety rules and regulations
  • Report any unsafe practices or conditions to your supervisor
  • Wear required personal protective equipment properly and report any defective PPE
  • Report all near misses, accidents, injuries, or illnesses, including Muscular Skeletal symptoms or disorders
  • Be aware of the expansion joint in the floor that runs through the drapery line and keep wheels clear of the cracks to prevent accidents
  • Be cautious of air clamps, staple guns, and other machinery to avoid injuries
  • Ensure all machines are turned off before replacing needles or leaving the workstation
  • Be aware of the Emergency Evacuation Route for your department
  • Complete various activities that may require lifting or carrying over 30 pounds in all directions
  • Occasionally move about to accomplish tasks or move from one worksite to another
  • Frequently operate machinery and hand tools
  • Repeat motions that may include the wrists, hands, and/or fingers
  • Perform other duties as assigned by your supervisor

Requirements:

  • High school graduate
  • Ability to use and read a tape measure
  • General knowledge of fabrics
  • Ability to use production equipment
  • Ability to use hand tools
  • Successfully pass color blind test
  • Accuracy with names, numbers and spelling
  • Capable of standing for extended periods of time
  • Capable of lifting on a continuous basis
  • Strong attention to details
  • Follow written and verbal instructions
What we offer:
  • Generous benefits package including medical, dental, vision, life, disability
  • A company culture that prioritizes internal development and professional growth
  • Time off with pay
  • 401(k) plan with a degree of employer matching
  • Paid parental leave
  • Wellness programs and product discounts

Additional Information:

Job Posted:
January 05, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Hunter Douglas - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Machine Operator

Machine Operator

Machine Operator is responsible for all aspects of machine operation and changeo...
Location
Location
United States , Port Huron
Salary
Salary:
Not provided
nescoresource.com Logo
Nesco Resource
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Previous machine operation experience
  • Good math skills
  • Experience with using gauges, micrometers, and calipers
  • Able to stand, lift, bend for 8-10 hours per day
  • Able to lift up to 50 pounds throughout shift
  • HS Diploma or GED
Job Responsibility
Job Responsibility
  • Effectively and safely operate and maintain the assigned machine
  • Read and follow standard work for assigned machine
  • Operate vertical bar machines to make electrical connectors
  • Quality checks of parts using gauges, micrometers, and calipers
  • Package finished parts
  • Fulltime
Read More
Arrow Right

Brake Press and Roller Former Machine Operator

Are you prepared to contribute to a dynamic manufacturing environment, supported...
Location
Location
Canada , Mississauga
Salary
Salary:
24.00 CAD / Hour
https://www.randstad.com Logo
Randstad
Expiration Date
January 25, 2026
Flip Icon
Requirements
Requirements
  • Minimum 3 years of experience in machining or CNC operation in a manufacturing environment
  • Proven ability to set up and operate roll forming machines and/or CNC equipment (lathes, mills, grinders, routers)
  • Skilled in using precision tools such as micrometers, calipers, height gauges, and dial indicators
  • Experience with first-article and in-process inspections
  • Familiarity with loading steel coils into roll forming machines
  • Strong understanding of shop safety protocols and best practices
  • Ability to read and interpret engineering drawings and specifications
  • Basic computer skills for machine operation and data entry
  • Ability to identify issues quickly and determine effective solutions
  • Experience with minor machine repairs and maintenance
Job Responsibility
Job Responsibility
  • Prepare machines to start a production cycle, including performing calibration, cleaning, and routine maintenance on equipment and machinery
  • Read and interpret engineering drawings/blueprints to determine the necessary machining operations
  • Consistently monitor and adjust machine settings as needed
  • Set machine or equipment controls and select proper tools for specific operations on particular jobs
  • Complete and maintain an activity log accurately
  • Other duties as may be assigned from time to time
  • Consistently monitor and verify output to detect any machine-related errors or defects
  • Perform minor machine repairs and regular preventative maintenance, ensuring the work area remains clean and safe
  • Proactively engage in daily safety procedures, ensuring that all work is performed in compliance with safety guidelines and that unsafe work is immediately stopped and corrected
  • Complete daily startup checklists to confirm all equipment and safety measures are in place before commencing work
What we offer
What we offer
  • UBCJA Union Membership
  • Employer paid Extended Health Care, Vision, Dental, AD&D, Life Insurance and Pension
  • 10% vacation pay in addition to hourly wage
  • Fulltime
Read More
Arrow Right

Machine operator

Do you want to earn a minimum of £530 per week? We’re looking for a Technical Op...
Location
Location
United Kingdom , Telford
Salary
Salary:
13.25 GBP / Hour
avarafoods.co.uk Logo
Avara Foods
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience within a production/manufacturing setting showing an understanding of a fast-moving process
  • Good level of English and basic numeracy skills
  • The ability to work well within a team and communicate effectively
  • Good attention to detail and a flexible attitude to tasks
Job Responsibility
Job Responsibility
  • Perform start up and close down procedures
  • Complete routine maintenance of specific line equipment
  • Analyse, interpret and report live data for performance evaluation
  • Deliver the departmental daily plan
  • Maintain, monitor and achieve operational targets
  • Monitor and improve product quality
  • Complete line quality checks
  • Perform production process checks in the department
  • Maintain accurate stock records
  • Apply food safety management procedures
What we offer
What we offer
  • Training and development from day one
  • Secure contract
  • Guaranteed hours
  • Opportunities for overtime
  • Subsidised staff canteen
  • Free on-site parking
  • Earn £250 for every friend or family member you refer for a job with us
  • Fulltime
Read More
Arrow Right

Brake Press and Roller Former Machine Operator

Are you prepared to contribute to a dynamic manufacturing environment, supported...
Location
Location
Canada , Mississauga
Salary
Salary:
24.00 CAD / Hour
https://www.randstad.com Logo
Randstad
Expiration Date
January 25, 2026
Flip Icon
Requirements
Requirements
  • Minimum 3 years of experience in machining or CNC operation in a manufacturing environment
  • Proven ability to set up and operate roll forming machines and/or CNC equipment (lathes, mills, grinders, routers)
  • Skilled in using precision tools such as micrometers, calipers, height gauges, and dial indicators
  • Experience with first-article and in-process inspections
  • Familiarity with loading steel coils into roll forming machines
  • Strong understanding of shop safety protocols and best practices
  • Ability to read and interpret engineering drawings and specifications
  • Basic computer skills for machine operation and data entry
  • Ability to identify issues quickly and determine effective solutions
  • Experience with minor machine repairs and maintenance
Job Responsibility
Job Responsibility
  • Prepare machines to start a production cycle, including performing calibration, cleaning, and routine maintenance on equipment and machinery
  • Read and interpret engineering drawings/blueprints to determine the necessary machining operations
  • Consistently monitor and adjust machine settings as needed
  • Set machine or equipment controls and select proper tools for specific operations on particular jobs
  • Complete and maintain an activity log accurately
  • Other duties as may be assigned from time to time
  • Consistently monitor and verify output to detect any machine-related errors or defects
  • Perform minor machine repairs and regular preventative maintenance, ensuring the work area remains clean and safe
  • Proactively engage in daily safety procedures, ensuring that all work is performed in compliance with safety guidelines and that unsafe work is immediately stopped and corrected
  • Complete daily startup checklists to confirm all equipment and safety measures are in place before commencing work
What we offer
What we offer
  • UBCJA Union Membership
  • Employer paid Extended Health Care, Vision, Dental, AD&D, Life Insurance and Pension
  • 10% vacation pay in addition to hourly wage
  • Fulltime
Read More
Arrow Right

Machine operator

Are you a detail-oriented Machine Operator ready to apply your technical skills ...
Location
Location
Canada , Mississauga
Salary
Salary:
18.00 - 24.00 CAD / Hour
https://www.randstad.com Logo
Randstad
Expiration Date
January 29, 2026
Flip Icon
Requirements
Requirements
  • Previous machine operation experience in a manufacturing or production environment
  • A strong mechanical aptitude and familiarity with precision measuring tools
  • The ability to perform physical tasks, including standing for extended periods and occasional lifting
  • Demonstrated commitment to workplace safety and quality control
  • Effective communication skills and the ability to work collaboratively in a team
Job Responsibility
Job Responsibility
  • Setting up, operating, and monitoring various production machinery according to work orders and specifications
  • Performing routine quality checks on finished products to ensure they meet stringent standards
  • Troubleshooting minor equipment issues and performing basic preventative maintenance
  • Adhering strictly to all safety protocols and operational procedures
  • Maintaining accurate production logs and documentation of run cycles and output
What we offer
What we offer
  • Access to the Best: Benefit from our connections to a wide network of industry-leading production facilities
  • Competitive Compensation: Positions offer excellent pay rates
  • Schedule Flexibility: We have numerous full-time openings across day, afternoon, and night shifts to accommodate diverse lifestyles
  • Path to Permanency: Many of our clients offer temporary-to-permanent contracts
  • Enhance Your Skills: Gain valuable experience operating a variety of production equipment, including CNC machines, packaging equipment, high-speed assembly lines, and more
  • Fulltime
Read More
Arrow Right

Machine Operator

Join our Mississauga team as an experienced Night Shift Machine Operator. We off...
Location
Location
Canada , Mississauga
Salary
Salary:
21.00 - 24.00 CAD / Hour
https://www.randstad.com Logo
Randstad
Expiration Date
January 15, 2026
Flip Icon
Requirements
Requirements
  • Minimum 2+ years of Machine Operator experience in an industrial setting
  • Proven ability to operate and support PLC-controlled equipment
  • Must successfully pass a criminal background check
  • Willingness to learn and apply Manufacturing Best Practices for continuous improvement
  • Flexible availability, including willingness to work overtime and occasional weekend shifts
  • Strong conflict resolution skills and ability to maintain professionalism under pressure
  • Committed to a 'Right First Time' quality mindset
  • Demonstrates initiative, follows directions, and executes plans efficiently
  • Possesses technical aptitude
  • a technical background is considered an asset
Job Responsibility
Job Responsibility
  • Operate Machinery: Hands-on operation and monitoring of PLC-controlled equipment
  • Ensure Quality: Follow all Good Manufacturing Practices (GMP) to produce high-quality goods
  • Maintain Safety: Adhere strictly to all Health & Safety protocols
  • Production Support: Perform basic checks and adjustments to ensure efficient flow
  • Start up, operate, and safely shut down production lines, following all safety protocols
  • Change over materials and update production dates based on shop order requirements
  • Efficiently and accurately operate IPC interfaces and in-line labeling systems
  • Identify and clear jams, troubleshoot equipment issues, and perform minor repairs to minimize downtime
  • Perform routine cleaning and general maintenance, and promptly notify appropriate personnel of required additional maintenance
  • Immediately report any food safety or product quality concerns to authorized team members
What we offer
What we offer
  • Clean, safe working environment
  • Weekly pay via direct deposit
  • Transit-accessible location
  • Option to bank vacation pay
  • Onsite Randstad representative for direct support
  • Benefit plan available through Sun Life Insurance (includes dental, medical, and more)
  • FREE coffee and tea in the brand-new lunchroom
  • Fulltime
!
Read More
Arrow Right

Machine Operator Assistant

An opportunity currently exists for a Machine Operator Assistant to join our bus...
Location
Location
Australia , Sydney
Salary
Salary:
Not provided
polycell.com.au Logo
Polycell (NSW) Pty Ltd
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in handling and operating machines
  • Basic engineering background to assist in the manipulation of machines
  • Preferably hold a current forklift license
  • Willing to follow procedure and learn to use technology
  • Excellent ability to work independently as well as in a team environment
Job Responsibility
Job Responsibility
  • Operation of machines
  • Inspection of mechanical components and documentation of results
  • Working in fast-paced production lines, ensuring quality and reliability
  • Flexibility to work overtime hours as and when required
  • Fulltime
Read More
Arrow Right

Embroidery Machine Operator

We are currently hiring an Embroidery Machine Operator to join our fast-paced, h...
Location
Location
United States , Hoffman Estates
Salary
Salary:
20.00 - 22.00 USD / Hour
clubcolors.com Logo
Club Colors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum 1–2 years of experience operating automatic embroidery machines
  • Proficient with design uploads, hooping, thread selection, and using proper backing materials
  • Familiarity with Pulse software (or similar embroidery software platforms)
  • Strong attention to detail, hand-eye coordination, and ability to troubleshoot machine issues
  • Comfortable operating multiple machines simultaneously
  • Dependable, punctual, and capable of working efficiently in a team environment
Job Responsibility
Job Responsibility
  • Interpret work orders to determine embroidery placement, thread colors, and design specifications
  • Upload logos and artwork into machines using Pulse software
  • Select proper hoops, thread colors, and backing material for each garment
  • Set up and operate multi-head embroidery machines with precision
  • Monitor machines during operation, performing thread and bobbin changes as needed
  • Conduct light finishing work, including steaming or ironing to smooth embroidery areas
  • Repair defective embroidery or fill in blanks as needed (Stitch Busting process)
  • Fold, pack, and prepare finished orders
  • Assist with quality control inspections to ensure top-tier results
  • Maintain a clean, organized workstation and follow all safety procedures
What we offer
What we offer
  • Stable schedule: Guaranteed 40 hours per week, year-round
  • Professional development: Hands-on training and learning opportunities
  • Supportive environment: Collaborative team culture with monthly incentives and events
  • Medical, Dental, Vision, and ancillary coverage through BCBSIL
  • 401(k) & Roth options with employer match
  • Generous PTO and paid holidays
  • Modern workspace: Clean, well-organized facility with updated equipment
  • Company perks: Branded apparel and exclusive team recognition programs and Presidents Club eligibility
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy