Lunchtime server Job at Randstad (Dorking)

New

Lunchtime server

Temporary Lunchtime Server - Immediate Start Available. Are you looking for a sh...

Location

United Kingdom , Dorking

Salary:

Not provided

Randstad

Expiration Date

January 27, 2026

Requirements

Non Teaching experience
communication skills
motivated

Job Responsibility

Setting up the dining area for lunchtime service
Serving hot meals to pupils and staff
Operating the dishwasher and maintaining cleanliness in the servery
Clearing down after lunch, including wiping surfaces and washing equipment
Working collaboratively with school staff to ensure lunchtime runs safely and efficiently

Parttime

New

Instrument Test Technician

Conducts production testing of assembled flow cytometers and related medical dev...

Location

United States , San Jose

Salary:

27.00 - 30.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Min educational requirement should be AS in electronics
Some experience in Testing mechanicals (i.e. electronics, lasers)
Some experience in manufacturing work setting
Requires an Associate's degree (A.S.) or equivalent from two-year college or technical school
3+ years related experience in a high tech, manufacturing environment
Ability to effectively communicate information and respond to questions both verbally and in writing
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
Good mechanical aptitude, dexterity and hand/eye coordination. Must be able to reach, bend and lift 35 lbs on a daily basis
Experienced in the use of: DVM’s, Oscilloscope and general test equipment

Job Responsibility

Conducts production testing of assembled flow cytometers and related medical device products
May integrate systems and conduct a variety of electronic, mechanical, optical, fluidic and electromechanical activities on systems, subassemblies, and parts to ensure unit functions according to specifications
Will be expected to perform system level and subassembly level troubleshooting to determine root cause, and implement correction of assembly or material defects
Responsible for producing quality products on schedule
Performs instrument optimization functions after final assembly: laser alignment, pressure adjustments, electrical adjustments, etc.
Performs final production testing and inspection to ensure products meet performance specifications and standards
Analyzes test results on defective units to determine root cause of failure
Replaces or repairs defective components or assemblies, processes appropriate paperwork, may return unit to assembly for repair
Compares test results with specifications and records test data and plots test results
Generates required documentation to complete the Device History Record (DHR)

Fulltime

New

Quality Control Inspector

The QM Associate Scientist is required to perform testing of various Microorgani...

Location

United States , Sparks

Salary:

15.00 - 19.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Experience in handling biological or chemical samples and knowledge of GLP
Basic knowledge in a broad range of laboratory techniques
History of self motivation with a background in biological lab science
Demonstrated verbal and written communication skills in a team environment as well as a desire to work within a team
Capable of readily identifying and analyzing problems
Have basic analytical skills and be familiar with database and statistical software
BS or BA in related field required. Typical degree in Biological Sciences, Chemistry, Molecular, or related field

Job Responsibility

Responsible for Microbiology testing in peptone manufacturing, raw material products, and Final DCM testing as required
Perform testing of various Microorganisms in a Biosafety Level II / III Laboratory with strict adherence to safety policies
Ability to work in a clean room environment and meet validation requirements associated with donning and doffing clean room garments
Responsible for Microbiology testing of prepared media as well as preparing various medias from scratch

Fulltime

New

Software Development Engineer in Test

SDET (Software Development Engineer in Test) - Software Test Engineer Position D...

Location

United States , San Diego

Salary:

48.00 - 52.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Bachelor’s Degree or Higher in computer science or an engineering discipline
3-5 years of recent software development experience
3-5 years of recent software test experience
Expertise in the creation of test scenarios for all levels
Proficiency in at least one modern programming language (C#)
Understands databases (SQL Server is preferred) and is able to develop EXPERT – complex level queries
Intermediate in developing new tools, Automation frameworks, and methodologies
Agile Environment experience using user stories, providing estimates etc.
Understanding API test/Load testing framework setup
Understand Object Oriented software design and principles

Job Responsibility

Contributes to the creation and maintenance of the development program’s test automation strategy
Has direct oversight and responsibility for the test automation team’s ability to successfully execute
Develop automation for user-facing applications, API’s, web-services, and databases
Build testing tools that allow system test teams to verify core services, web applications, and interfaces to other systems
Perform testing activities within all phases as required within the projects such as functional testing, integration testing, performance testing and assisting with user acceptance testing
Create and maintain shared libraries, tools, and frameworks to increase team productivity
Works with Developers, Dev Ops and Testers to make applications more testable, scalable
Incorporates coding best practices and regularly conducts/participates in Code Reviews
Over 75% will be programming/ development in Test

Fulltime

New

General Assembler

Location

United States , El Paso

Salary:

Not provided

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

4 months of work experience in a manufacturing environment preferred
Able to read, write, and understand Basic English preferred
Operating skills of manufacturing equipment, tools, and hand/pallet jack is preferred
Problem solving skills are highly preferred
High School Diploma/GED preferred

Job Responsibility

Possess a basic understanding of production processes within area of assignment and a working knowledge of manufacturing equipment
Transport materials of varying weight in accordance with established safety guidelines using material handling equipment and additional assistance as required
Demonstrates adherence to safety procedures by monitoring personal and peer behaviors, work environment and housekeeping
Available for overtime as needed
Performs all duties with attention to quality, safety, and environmental matter such as wearing appropriate personal protective equipment, identifying, reporting, and appropriately responding to hazards in the work area (spills/accidents/near misses), always maintaining proper housekeeping, and properly labeling and storing chemicals
Assume responsibility for the environmental effects of work performed and for the identification and recording of environmental problems as they arise
Complete all regulatory training as assigned (GPM, s, ISO14001, OSHA, etc.)
Complete Operator Training Program according to established guidelines
Be available for other projects or assignments as requested by management
Looking for ways to simplify or improve products, services, systems, and processes to achieve

Fulltime

New

Molding operator

Mold Attendant Night shift. 7pm - 7am (3-2-2-3 Schedule).

Location

United States , Sumter

Salary:

Not provided

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

HS Diploma or GED
Must be able to work effectively in a team with limited supervision
Must be familiar with all relevant controlled documents (Work Instructions, Forms, etc.), preventative maintenance task lists and equipment manuals which pertain to operation of all equipment in the cell
Prefer 1-2 years of experience working in a manufacturing environment preferably injection molding presses (both electric & hydraulic)

Job Responsibility

Operate multi cavity injection molding machines and auxiliary equipment to manufacture products which conform to quality specifications, at the rated output
Operate injection molds/presses and place surplus molded components into inventory
Operate injection molding presses to supply downstream equipment with molded components including inspection of components and requesting technical support to maintain part quality
Responsible for molding production in assigned area and minor maintenance activities on assigned presses
Keep machinery, work area and floors neat and orderly and comply with GMP requirements
Able to perform thorough product inspections and make appropriate decisions relative to product quality requirements
Conduct minor maintenance activities on assigned presses
Work with other molding team members to keep equipment running during breaks and callouts
Maintain a thorough knowledge of all products produced in the department, raw materials required, and product quality specifications

Fulltime

New

Packaging Engineer

Packaging design development for medical devices or pharma industry. Packaging v...

Location

United States , Franklin Lakes

Salary:

Not provided

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Experience/knowledge with CAD tools for packaging design
Experience with statistics and design of experiments
Packaging system verification and validation experience
Bachelor Degree equivalent in Packaging, Mechanical Engineering, Materials Engineering or in a related field of study
minimum 3 years of experience in Medical Device packaging
Packaging design development for medical devices or pharma industry
Packaging verification and validation for medical devices or pharma industry
Design control process for medical devices
Packaging standards and regulatory requirements for medical devices (i.e. ISO11607, EUMDR, etc.)

Job Responsibility

Demonstrates working knowledge of package engineering principles and techniques
Demonstrates working knowledge of legal requirements and documents
Designs, prototypes, and qualifies standard new packaging concepts in accordance with design control requirements with moderate guidance
Evaluates and improves standard existing packaging concepts with moderate guidance
Identifies, analyzes, and specifies standard packaging materials and equipment with moderate guidance
Supports external resource/contractors as required
Applies knowledge and skills to a variety of standard activities
Works with moderate guidance in own area of knowledge
Will not manage any direct reports
Will not be responsible for any functional areas

Fulltime

New

Lab Technician

Provide hands-on technical skill and engineering support to design and developme...

Location

United States , Warwick

Salary:

25.00 - 28.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

BS degree in engineering is required (Mechanical or Biomedical Engineering preferred)
0-2 years of engineering experience is required, preferably in medical devices
Demonstrated ability to utilize statistical tools and computer analysis
Proficiency with MS Software Suite including Excel and Laboratory Mechanical Test Equipment is required
Ability to demonstrate strong teamwork and communication skills
Must be detail-oriented
Strong time management skills required
Must be able to work overtime as required to meet BD business requirements
Need US Citizens Or GC Holders Only

Job Responsibility

Follow instructions provided by Project Technical Leadership
Cleans lab supplies and glassware
Operates glass washers, dryers, and autoclaves
Assists with the removal and disposal of waste chemicals
Provides training support for on-boarding and/or new procedures
Demonstrates the ability to follow established procedures according to Good Manufacturing Practices (GMP)
Must follow all BD housekeeping policies and procedures
Must follow all BD safety policies and procedures
Perform other duties as required
Provide hands-on technical skill and engineering support to design and development project activities on new and existing products

Fulltime

Lunchtime server

Randstad

Location:
United Kingdom , Dorking

Category:
Education

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 05, 2026

Expiration:
January 27, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Lunchtime server

Lunchtime server

Instrument Test Technician

Quality Control Inspector

Software Development Engineer in Test

General Assembler

Molding operator

Packaging Engineer

Lab Technician

Lunchtime server

Randstad

Location:United Kingdom , Dorking

Category:Education

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 05, 2026

Expiration:January 27, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Lunchtime server

Lunchtime server

Instrument Test Technician

Quality Control Inspector

Software Development Engineer in Test

General Assembler

Molding operator

Packaging Engineer

Lab Technician

Location:
United Kingdom , Dorking

Category:
Education

Contract Type:
Not provided

Job Posted:
January 05, 2026

Expiration:
January 27, 2026