Low Voltage Power Engineer, Integration Job at Archer Aviation (San Jose)

Staff Power Electronics Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

163200.00 - 200000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS Degree in Electrical Engineering with 10+ years or MS with 8+ years of experience in related fields
Sound knowledge and hands-on experience in traditional and modern power electronic technologies
Low power and high power DC-DC topologies, gate driver, modulation techniques and control theories
Inverter technology for variable speed motor drive, including topologies and PWM techniques
Familiarity with both wide-band-gap and silicon power semiconductor devices
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Experience in design, build, manufacturing and testing of custom magnetics (high -frequency transformers, inductors)
Power electronics system architecture design and hardware integration
Power converters and motor drive (AC-DC, DC-DC, DC-AC) control technologies
Microcontrollers and multiple serial protocols (UART, CAN, SPI, I2C, etc.)

Job Responsibility

Design and build high voltage, high power density power electronics converter products for eVTOL applications
Develop and analyze electrical architectures and power converter (DC-DC) topologies, and ensure system functions, performance, safety and reliability requirements are achieved
Responsible for all aspects of power electronics designs required in an all-electric aircraft, from components to circuits, modules and system integration
Leads new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, component selection, modeling, prototype, product build, verification testing, safety and reliability validation and manufacturing
Design electronic power supply and sensing circuits
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to determine if the design meets functional and performance specifications
Troubleshoot and help root cause any issues that occur in the prototype line

Fulltime

Power Conversion and Distribution System Lead

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

172800.00 - 227600.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS Degree in Electrical Engineering with 10+ years or MS with 8+ years of experience in related fields
Experience in developing electrical power conversion and distribution system architectures, requirements and specifications, validation and verification
Solid knowledge and hands-on experience on integrating the power electronics and control modules into the electrical system
Understand traditional and modern power electronics technologies including (not limited to): DC-DC and AC-DC/DC-AC power electronics topologies
Familiarity with both wide-band-gap and silicon power semiconductor devices, passive power devices, e.g. inductors, capacitors, resistors and transformers
Power electronics system design and hardware integration
Master of all types of lab instruments: oscilloscope, power supplies, electronics loads, function generators, network analyzer, EMC analyzers etc.
Excellent organizational, communication and writing skills

Job Responsibility

Define the architecture of aircraft high voltage to low voltage power conversion and low voltage distribution system, including power electronics converters, batteries, power distribution units, circuit breaker units, and interfaces to avionics equipment for aircraft platforms
Perform key technical trade-offs for power conversion and distribution system to meet the aircraft function and safety requirements and optimize system performance such as weight and cost
Define system development roadmap and strategy to meet the program schedule and requirements, and perform make vs buy studies and decisions on key system components/modules
Lead electrical load analysis for the system, define and optimize the power budgets
Create power conversion and distribution system requirements, flow down the aircraft requirements to the system requirements, and define key features and characteristics of the electrical system
Collaborate with the cross-functional teams to define the requirements for system modules and boards, and lead the validation and verification of requirements
Lead the electrical system safety and reliability analysis, and support aircraft level and module level safety and reliability analysis
Lead integration of power conversion and distribution system and modules into the aircraft platforms, plan the module acceptance tests, integration tests, safety of flight tests and review and approve test results
Support airborne power conversion and distribution modules design, development and test based on the aircraft and electrical system requirements, system architecture and design standards established

Fulltime

Low Volt Technician

The Low Voltage Technician (LVT1) ensures that all safety programs, policies, an...

Location

United States , Meridian

Salary:

Not provided

Engineered Structures, Inc. (ESI)

Expiration Date

Until further notice

Requirements

High school diploma or equivalent is required
Additional technical certifications in a low voltage related field preferred
Proven experience (2+ years) as a Low Voltage Technician or similar role
In-depth knowledge of low voltage systems, including installation, maintenance, troubleshooting, and repair
Ability to work with CCTV, Access control and other low voltage platforms
Demonstrates leadership, integrity, perseverance, reliability, respect, and self-discipline
Demonstrates personal motivation, initiative, and potential for growth
Must be able to effectively collaborate with the project team to plan and accomplish goals
Willingness to work flexible hours, including evenings, weekends, and on-call rotations
Valid driver's license and reliable means of transportation

Job Responsibility

Collaborate with a team of low voltage technicians
Install, repair, and maintain various low voltage systems, including commercial and industrial refrigeration unit
Collaborate with the engineering and maintenance departments to develop preventive maintenance schedules and strategies to optimize system performance and reduce downtime
Install and support fire alarm systems including fire alarm control panels (FACP), initiating devices, notification appliances, power supplies, and networked fire alarm components
Perform device mounting, conductor routing, labeling, and termination of low-voltage cabling in compliance with code and project specifications
Conduct regular inspections of low voltage work, identifying and addressing potential issues to prevent system failures and ensure compliance with safety and environmental regulations
Testing and troubleshooting low voltage systems to ensure proper functioning
Maintain accurate records of work performed, equipment maintenance schedules, and inventory of spare parts and supplies
Ensure compliance with industry standards, codes, and regulations in all low voltage-related activities
Diagnose and resolve fire alarm system issues including ground faults, device failures, communication errors, and programming discrepancies

What we offer

ESI covers 100% of the medical premium for all employees and families
Competitive 401k match
Lucrative bonus potential
Great upward mobility for career growth

Fulltime

Calibration Technical Specialist - Low Voltage Infrastructure

GM's Low Voltage Infrastructure Team within the Embedded Platform Systems & Infr...

Location

United States , Milford

Salary:

Not provided

General Motors

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical, Electrical, Computer, or Chemical Engineering
Minimum 7 years of overall job-related engineering experience
Minimum 5 years of Calibration specific experience
Strong background in calibration/controls, including associated tools (MATLAB, Simulink, INCA, CRETA, Vehicle Spy, CalCheck, JIRA, etc.)
High proficiency in root causing and triaging complex vehicle and system-level issues, with demonstrated ability to lead structured problem-solving efforts, drive issues to closure, and implement corrective actions across hardware, software, and calibration domains
Expertise with 12V/Low Voltage Electric Power Systems and/or Controls (low voltage setpoint control, battery saver modes, and low voltage load management)
Thorough knowledge of calibration process and Calibration Standard Work
Strong leadership skills with demonstrated ability to: Provide technical direction to other engineers and engineering support personnel, Drive global and industry decisions, Lead discussions, action plans, and solutions to drive issues to closure
Exercises independent judgment with minimal input from Engineering Group Manager
Proven leadership capabilities with a track record of driving results, demonstrating initiative, and maintaining strong “it’s on me” ownership

Job Responsibility

Technical leader for Electric Power (12V and Low-Voltage System) calibration for all Electrification and ICE vehicle programs
Lead the development of calibration strategies
serve as the Calibration Strategy Lead and Future Calibration Strategy Lead, developing and evolving Low Voltage Infrastructure calibration approaches to support next-generation Electric Power architectures
Develop common approaches and institutionalize them in Calibration Standard Work (Calibration Procedures, Cal Planner, Deliverables, Master Calibration, Cal Guides, CEGs / Cal Check, etc.)
Serve as the Calibration SME and Technical Leader to all LVI Scrums and TRBs, providing expert-level calibration guidance and ensuring alignment across all active programs
Serve as the Technical Response and Triage Expert and Lead
drive identification, prioritization, and resolution of technical issues through structured triage processes and lead a Calibration TRB
Identify and resolve requirement gaps in partnership with Technical Owners, ensuring calibration requirements are complete, accurate, and aligned across subsystems and programs
Improve the efficiency and quality of Calibration Standard Work by systematically driving present vehicle-based tasks into Lab and/or Math/Virtual environments
Mentor Calibration Engineers, providing technical training and establishing good communication and knowledge-sharing

What we offer

medical
dental
vision
Health Savings Account
Flexible Spending Accounts
retirement savings plan
sickness and accident benefits
life insurance
paid vacation & holidays
tuition assistance programs

Fulltime

Power Design Electrical Engineer

The Power Design Electrical Engineer is responsible for the design, analysis, an...

Location

United States , Salt Lake City

Salary:

Not provided

Spectrum Engineers

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or related field
Professional Engineer (PE)
10+ years of experience in power systems design
Experience with medium-voltage systems, protection & controls, and power distribution design
Proficiency with SKM, ETAP, EasyPower, or similar analysis tools
Strong understanding of NEC, IEEE standards, and utility interconnection requirements
Ability to create detailed engineering drawings and technical documentation
Excellent communication, teamwork, and problem-solving skills

Job Responsibility

Design low-voltage and medium-voltage power distribution systems (5kV–35kV)
Develop one-line diagrams, three-line diagrams, riser diagrams, panel schedules, equipment layouts, and grounding systems
Specify power distribution equipment such as switchgear, switchboards, MCCs, transformers, generators, UPS systems, and protective devices
Perform service load calculations in accordance with NEC, utility, and project requirements
Develop protection schemes for MV and LV systems, including relay protection, coordination, and control logic
Create protection one-lines, AC/DC schematics, relay settings, and control wiring diagrams
Review and interpret relay logic diagrams, SCADA points list, and interconnection requirements
Coordinate with utilities and authorities having jurisdiction (AHJs) for protection compliance
Perform engineering studies including: Short-circuit
Coordination / arc-flash analysis

Fulltime

Staff Electrical Engineer

Join Crusoe Energy as a Staff Electrical Engineer and lead the transformation of...

Location

United States , Arvada, CO

Salary:

171000.00 - 185000.00 USD / Year

Crusoe

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or an equivalent engineering discipline
Proven 7+ years of experience in advanced electrical design, ideally with engineered-to-order power distribution equipment like modular integrated buildings, switchboards, switchgear, or industrial control panels
Experience in a supervisory or management role for at least 2–3 years
Expert proficiency with electrical design software (e.g., AutoCAD Electrical, EPLAN) and product data management systems
Expert-level knowledge of the National Electrical Code (NEC) and UL listings (UL 508A, UL 891), with the ability to interpret and apply them in regulatory environments
Advanced knowledge of electrical components commonly used in power distribution and industrial automation systems
Exceptional analytical ability and strategic decision-making skills
Proven track record of solving engineering problems utilizing a first principles approach to design and analysis
Ability to lead, mentor, and develop a high-performing team of electrical engineers
This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required.

Job Responsibility

Lead the transformation of complex customer requirements into production-ready electrical designs, schematics, and detailed wiring diagrams for modular integrated electronics buildings and standalone power distribution equipment
Lead and direct the electrical design of modular integrated buildings, low voltage switchboards, medium voltage switchgear, and other critical power distribution equipment
Oversee the development of comprehensive electrical specification sheets, bills of materials (BOMs), detailed wiring schematics, and other crucial manufacturing documents
Oversee the allocation of electrical engineering resources across multiple projects and manage project priorities
Champion and ensure strict compliance of all product designs with complicated regulatory requirements (NEC/NFPA 70), UL listings (e.g., UL 508A, UL 891, UL 1558), and customer specifications
Conduct thorough schematic reviews, load calculations, and coordination studies
Initiate and lead reviews focusing on cost reduction strategies and enhancing overall manufacturing efficiency
Lead strategic collaboration initiatives with Mechanical Engineering, Sales, Project Management, and Manufacturing teams
Proactively identify and implement improvements to design procedures, processes, and methodologies
Provide expert technical guidance, mentorship, and professional development opportunities to electrical design engineers.

What we offer

Industry competitive pay and Restricted Stock Units
Health insurance package options (HDHP, PPO, vision, dental)
Employer contributions to HSA accounts
Paid Parental Leave, life insurance, and disability
401(k) with a 100% match up to 4% of salary
Generous paid time off, holiday schedule, and cell phone reimbursement
Tuition reimbursement and company-paid commuter benefits.

Fulltime

Manager, Electrical Engineering

The Manager, Electrical Engineering, leads the design, development, and implemen...

Location

United States , Austin

Salary:

Not provided

Hyliion

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical, Mechanical, or Aerospace Engineering
10+ Years of Engineering Experience
High-voltage power electronics design, including AC/DC and DC/DC converters and battery systems
Low- and high-voltage wiring harness design
Electrical hardware architecture and circuit design for electromechanical systems
Knowledge of and compliance with applicable electrical and safety standards
Experience with real-time control systems, including PLCs and microcontrollers
Systems engineering and structured product development processes
Electrical hardware design, optimization, and cost reduction
Prototyping, testing, and validation using tools such as FMEA and DVP&R

Job Responsibility

Lead the electrical engineering team in the design and development of the KARNO generator systems, ensuring effective integration of mechanical, electromechanical, and control elements
Oversee the design and execution of electrical hardware, control modules, and system-level solutions, ensuring a cohesive and integrated development approach
Integrate electrical and control modules into final products and collaborate with suppliers to ensure compliance with quality, performance, and safety requirements
Define electrical design requirements and technical best practices
ensuring both electrical and control components align with industry standards for hybrid power generation
Translate system requirements into system- and sub-system specifications for electrical, mechanical, and control components, supporting seamless integration across industrial and commercial applications
Provide coaching and leadership across engineering and operations teams, fostering a collaborative, innovative, and high-performing work environment
Ensure compliance with applicable safety and regulatory standards for electrical systems used in hybrid generator products
Collaborate closely with project managers and cross-functional teams—including mechanical, electrical, control, and supply chain—to meet project milestones and deliverables
Lead technical issue resolution at the hardware and component level, organizing troubleshooting efforts, conducting root cause analysis, and implementing corrective actions to improve system reliability

What we offer

Medical Plans, with PPO or HDHP options
Dental Plans, with buy-up option
Vision Plan
Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options
Short Term Disability, paid for by the company
Long Term Disability, paid for by the company
Flexible Spending Accounts (FSA)
Health Savings Account (HSA)
401k/Roth 401k
Voluntary Accident Plans

Fulltime

Staff Mechanical Engineer

Join Crusoe Energy as a Staff Mechanical Design Engineer / Supervisor and lead t...

Location

United States , Arvada, CO

Salary:

171000.00 - 185000.00 USD / Year

Crusoe

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical or Manufacturing Engineering, or an equivalent engineering discipline
Expert proficiency with 3D modeling software, specifically SolidWorks and SolidWorks PDM
Proven 7+ years of experience in advanced mechanical design, ideally engineered to order power distribution equipment like modular integrated buildings, switchboards, and switchgear, or related products
Expert-level knowledge of a wide range of building codes, energy codes, UL listings, and their respective compliance checks
Advanced knowledge of metals and materials commonly used for fabrication
Exceptional analytical and strategic decision-making skills
Unwavering commitment to detail
Ability to lead, mentor, and develop a high-performing team
Excellent written, and verbal communication skills
Ability to lift, lower, push, and pull merchandise up to 50 lbs, and to stand, walk, stoop, and bend for 8 hours or more daily

Job Responsibility

Lead and direct the design of modular integrated buildings, low voltage switchboards, medium voltage switchgear, and other critical power distribution equipment
oversee the development of comprehensive specification sheets, bills of materials, detailed assembly instructions, and other crucial manufacturing documents
Champion and ensure strict compliance of all product designs with complicated regulatory requirements, commercial codes, customer specifications, engineering standards, and company practices and procedures
Accept responsibility for the accurate and timely delivery of shop drawings, product submittals, operation and maintenance manuals, and as-built drawings
Conduct thorough model reviews and drawing checks as an integral part of the engineering design release process
Initiate, lead, and direct Design for Manufacturability and Assembly (DFMA) and Design for Excellence (DFx) reviews
Independently lead and manage Engineering Change Orders (ECOs)
Lead and direct strategic collaboration initiatives with Sales, Project Management, Purchasing, and Manufacturing teams
Proactively identify, propose, and implement improvements to design procedures, processes, and methodologies
Provide expert technical guidance, mentorship, and professional development opportunities to mechanical design engineers

What we offer

Restricted Stock Units
Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
Employer contributions to HSA accounts
Paid Parental Leave
Paid life insurance, short-term and long-term disability
Teladoc
Pet-friendly offices
401(k) with a 100% match up to 4% of salary
Generous paid time off and holiday schedule
Cell phone reimbursement

Fulltime

Low Voltage Power Engineer, Integration

Archer Aviation

Location:
United States , San Jose

Category:
IT - Software Development

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
December 06, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Low Voltage Power Engineer, Integration

Staff Power Electronics Engineer

Power Conversion and Distribution System Lead

Low Volt Technician

Calibration Technical Specialist - Low Voltage Infrastructure

Power Design Electrical Engineer

Staff Electrical Engineer

Manager, Electrical Engineering

Staff Mechanical Engineer

Low Voltage Power Engineer, Integration

Archer Aviation

Location:United States , San Jose

Category:IT - Software Development

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:December 06, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Low Voltage Power Engineer, Integration

Staff Power Electronics Engineer

Power Conversion and Distribution System Lead

Low Volt Technician

Calibration Technical Specialist - Low Voltage Infrastructure

Power Design Electrical Engineer

Staff Electrical Engineer

Manager, Electrical Engineering

Staff Mechanical Engineer

Location:
United States , San Jose

Category:
IT - Software Development

Contract Type:
Employment contract

Job Posted:
December 06, 2025